Related
Hello Everyone, I have ALE-L21 and my current firmware is C185B130 (apparently C185 is UAE region but i live in pakistan). Device is bootloader unlocked, rooted with TWRP installed.
I have a TWRP backup of current rom. I wanna try the 5.1 beta released for Europe but it says here ( http://forum.xda-developers.com/p8lite/general/beta-firmware-p8-lite-ale-l21-c432b008-t3243228 ) that i need C432B132 to upgrade to this. So I downloaded this firmware(C432B132) from Huawei website. There were two folders in it, dload and CUSTOM(not sure what that for). I extracted system.img, recovery.img, CUST.img, boot.img from UPDATE.APP given in the dload folder. So here is what i'm thinking.
1) Flashing the extracted system.img, recovery.img, CUST.img, boot.img would get me to C432B132?
2) After i install B132 can I upgrade to 5.1 using EMUI local update?
3) If something goes wrong, can I just flash TWRP and restore the backup?
-
Or this whole idea is foolish and i would screw up my phone after flashing system, cust and boot of some other firmware designed for some other region???
SobanAmin said:
Hello Everyone, I have ALE-L21 and my current firmware is C185B130 (apparently C185 is UAE region but i live in pakistan). Device is bootloader unlocked, rooted with TWRP installed.
I have a TWRP backup of current rom. I wanna try the 5.1 beta released for Europe but it says here ( http://forum.xda-developers.com/p8lite/general/beta-firmware-p8-lite-ale-l21-c432b008-t3243228 ) that i need C432B132 to upgrade to this. So I downloaded this firmware(C432B132) from Huawei website. There were two folders in it, dload and CUSTOM(not sure what that for). I extracted system.img, recovery.img, CUST.img, boot.img from UPDATE.APP given in the dload folder. So here is what i'm thinking.
1) Flashing the extracted system.img, recovery.img, CUST.img, boot.img would get me to C432B132?
2) After i install B132 can I upgrade to 5.1 using EMUI local update?
3) If something goes wrong, can I just flash TWRP and restore the backup?
-
Or this whole idea is foolish and i would screw up my phone after flashing system, cust and boot of some other firmware designed for some other region???
Click to expand...
Click to collapse
No this is wrong
1. You need to downgrade to B052
2. Install B136a
3. Install B008(Android 5.1.1)
After each install is recommended to make wipe
Thanks
sokkoban said:
No this is wrong
1. You need to downgrade to B052
2. Install B136a
3. Install B008(Android 5.1.1)
After each install is recommended to make wipe
Click to expand...
Click to collapse
I dont think that you need to go all the way to B052 and then flash the required version
This is what i did:
1) Flashed 132 cust, recovery, boot, system. My build number changed to something like balong ( I dont remember exactly :silly: ).
2) I flashed the UPDATE.APP file that was in the CUSTOM folder (that came with B132 rar file) via EMUI and it restored my build to B132.
3) Tried updating to 5.1 via EMUI but failed.
4) To give it a last try, I downloaded and flashed my phone with CUST, recovery, system, boot.img of B136a and then the update worked. My phone is now 5.1.1 B006
Thanks for the reply mate :good:
Confirmation ?
sobanamin said:
i dont think that you need to go all the way to b052 and then flash the required version
this is what i did:
1) flashed 132 cust, recovery, boot, system. My build number changed to something like balong ( i dont remember exactly :silly: ).
2) i flashed the update.app file that was in the custom folder (that came with b132 rar file) via emui and it restored my build to b132.
3) tried updating to 5.1 via emui but failed.
4) to give it a last try, i downloaded and flashed my phone with cust, recovery, system, boot.img of b136a and then the update worked. My phone is now 5.1.1 b006 :d
thanks for the reply mate :good:
Click to expand...
Click to collapse
i also have p8 lite c185b130 is this confirmly working ?
wahaj0892 said:
i also have p8 lite c185b130 is this confirmly working ?
Click to expand...
Click to collapse
yeah its working fine. I think the battery life has improved a little bit or maybe it is just because i haven't installed much apps after flashing this rom compared to when I was using the B130. The only thing i miss from B130 is that small 2g, 3g written on the signal bars. This one only shows the 2g or 3g network type when the mobile data is turned on. Huawei cloud is also not present in it so you may wanna backup your contacts and stuff
SobanAmin said:
yeah its working fine. I think the battery life has improved a little bit or maybe it is just because i haven't installed much apps after flashing this rom compared to when I was using the B130. The only thing i miss from B130 is that small 2g, 3g written on the signal bars. This one only shows the 2g or 3g network type when the mobile data is turned on. Huawei cloud is also not present in it so you may wanna backup your contacts and stuff
Click to expand...
Click to collapse
thanks for the reply ...
some more question do i need a unlock bootloader ?
secondly i have a wired problem while typing my phone has a double tap issue is that gone ?
Hello,
Double tap issue still present in beta
sokkoban said:
Hello,
Double tap issue still present in beta
Click to expand...
Click to collapse
I dont use it often so I cant tell for sure
please im on b130 (5.0.1)
can you tell me (step by step) how can i get (5.1.1) my (bootloader unlocked with stovk recovery) please please
mimoriich said:
please im on b130 (5.0.1)
can you tell me (step by step) how can i get (5.1.1) my (bootloader unlocked with stovk recovery) please please
Click to expand...
Click to collapse
Hello,
Read this post, will help you http://forum.xda-developers.com/showpost.php?p=63993458&postcount=3
sokkoban said:
Hello,
Read this post, will help you http://forum.xda-developers.com/showpost.php?p=63993458&postcount=3
Click to expand...
Click to collapse
please tell me how u flash it i putted dload file to sd card & i reeboted (home + vol down + vol up ) its said error
SobanAmin said:
I dont think that you need to go all the way to B052 and then flash the required version
This is what i did:
1) Flashed 132 cust, recovery, boot, system. My build number changed to something like balong ( I dont remember exactly :silly: ).
2) I flashed the UPDATE.APP file that was in the CUSTOM folder (that came with B132 rar file) via EMUI and it restored my build to B132.
3) Tried updating to 5.1 via EMUI but failed.
4) To give it a last try, I downloaded and flashed my phone with CUST, recovery, system, boot.img of B136a and then the update worked. My phone is now 5.1.1 B006
Thanks for the reply mate :good:
Click to expand...
Click to collapse
Can I apply this process for my ALE-L21C636B150...?
mimoriich said:
please tell me how u flash it i putted dload file to sd card & i reeboted (home + vol down + vol up ) its said error
Click to expand...
Click to collapse
If you are in stock recovery and have B132 try to put dload folder in internal memory and use software updater
Rifat Nurr said:
Can I apply this process for my ALE-L21C636B150...?
Click to expand...
Click to collapse
No, you can't. This beta is only for B136a(may be work also in B132)
sokkoban said:
Hello,
Double tap issue still present in beta
Click to expand...
Click to collapse
what about b170 ??
SobanAmin said:
I dont think that you need to go all the way to B052 and then flash the required version
This is what i did:
1) Flashed 132 cust, recovery, boot, system. My build number changed to something like balong ( I dont remember exactly :silly: ).
2) I flashed the UPDATE.APP file that was in the CUSTOM folder (that came with B132 rar file) via EMUI and it restored my build to B132.
3) Tried updating to 5.1 via EMUI but failed.
4) To give it a last try, I downloaded and flashed my phone with CUST, recovery, system, boot.img of B136a and then the update worked. My phone is now 5.1.1 B006
Thanks for the reply mate :good:
Click to expand...
Click to collapse
can i flash c136a direcly over c185b130
MAYBE
wahaj0892 said:
can i flash c136a direcly over c185b130
Click to expand...
Click to collapse
Give It a try. If i doesn't work then you can just flash 132->136 and then apply update. But there maybe some problem with the version number changing to "BALONG". I faced this problem when I flashed 132 over my 130 but then I applied UPDATE.APP file(the small file in the custom folder) via EMUI Updater and it fixed the version number. But the 136a rom did not had any UPDATE.APP in custom folder so I dont know what to do if you get a version number problem. You can try flashing the 5.1 update via EMUI and maybe it will fix the version number problem (if it happened in the first place) or you can always goto 132->136 and apply 5.1
wahaj0892 said:
thanks for the reply ...
some more question do i need a unlock bootloader ?
secondly i have a wired problem while typing my phone has a double tap issue is that gone ?
Click to expand...
Click to collapse
yes you need to unlock the boot loader. What exactly do you mean by double tap issue? are you talking about the double tap to wake feature not working sometimes? Yes the DoubletapToWake dont works sometime which can be very annoying so I just disabled that feature and using the power button ever since. As for the typing issue, No I'm not facing any typing issues, never did on the B130 and not on this 5.1 version. Try using someother keyboard app?
SobanAmin said:
yes you need to unlock the boot loader. What exactly do you mean by double tap issue? are you talking about the double tap to wake feature not working sometimes? Yes the DoubletapToWake dont works sometime which can be very annoying so I just disabled that feature and using the power button ever since. As for the typing issue, No I'm not facing any typing issues, never did on the B130 and not on this 5.1 version. Try using someother keyboard app?
Click to expand...
Click to collapse
it is related to typing .. fast typing cause this issue .. i tired many apps nothing fix the issue
wahaj0892 said:
can i flash c136a direcly over c185b130
Click to expand...
Click to collapse
I tried to install b132 and b136a on my c185b130 but it failed both times.
---------- Post added at 06:27 PM ---------- Previous post was at 06:22 PM ----------
SobanAmin said:
Give It a try. If i doesn't work then you can just flash 132->136 and then apply update. But there maybe some problem with the version number changing to "BALONG". I faced this problem when I flashed 132 over my 130 but then I applied UPDATE.APP file(the small file in the custom folder) via EMUI Updater and it fixed the version number. But the 136a rom did not had any UPDATE.APP in custom folder so I dont know what to do if you get a version number problem. You can try flashing the 5.1 update via EMUI and maybe it will fix the version number problem (if it happened in the first place) or you can always goto 132->136 and apply 5.1
Click to expand...
Click to collapse
I have c185b130, there is c185b131 update on consumer.huawei.com for UAE region uploaded on 31-12-2015, will it work on my device? What are the changes in c185b130 and c185b131?
Warning : I am not responsable for any bricked devices, dead sd cards, or other issues, I just wanted to share this, because I know, there are many Honor 5x KIW-L21 C185 users, and this, in my case, worked.
Warning :
***This will turn your device into a single sim phone.***
This WILL CHANGE your CUST version to 432.
Because I couldn't wait anymore for the official MM update from Huawei. I managed to install EMUI 4.0 Android 6.0.1 on my KIW-L21 C185, Middle East Version following this steps here: http://forum.xda-developers.com/showpost.php?p=67851428&postcount=2 .
1. You need to install TWRP, obviously . http://forum.xda-developers.com/devdb/project/dl/?id=19454
2. Download mm-update from here http://forum.xda-developers.com/devdb/project/dl/?id=19446 and extract files, you should be seeing 2 image files : TZ.img and MODEM.img .
3. Download and install Huawei Update Extractor http://forum.xda-developers.com/showthread.php?t=2433454 .
4. In my case, I downloaded this firmware here http://download-c.huawei.com/download/downloadCenter?downloadId=84663&version=327467 .
5. Now, using the Huawei Update Extractor, open the downloaded firmware and extract BOOT.img , CUST.img , SYSTEM.img on your computer.
6. Reboot phone in recovery mode and make a full TWRP backup.
7.Wipe data/factory reset and then wipe system, Data, Cache, Cust, Dalvik/Art Cache.
8. Install, and in the bottom of the screen, choose install image as following:
I. BOOT.img install to Boot.
II. CUST.img install to cust_image.
III. SYSTEM.img install to system_image.
IV. TZ.img install to tz_image.
V. MODEM.img install to modem_image.
9. After installing all of the above files, just reboot and there it is.
Untill now, I haven't found any bugs or issues, except that in the 'About Phone' panel at Model Number it doesn't say anymore KIW-L21 , but says 'MSM8916 for arm64'.
Screenshots
Is it stable and all options working
Sent from my KIW-L21 using Tapatalk
kevoxy said:
Is it stable and all options working
Click to expand...
Click to collapse
So it seems, in my case,everything is working, no FC's , camera working fine in professional mode, extends battery life.
Only thing I didn't try is going back to stock C185 Rom.
Also,didn't try flashing others rom,because I really like how it's working on EMUI 4.0
hi boro Im flash this rom in honor 5x kiw-l21c185b140 everything good just rom one sim card not dual sim???
mammadpsy said:
hi boro Im flash this rom in honor 5x kiw-l21c185b140 everything good just rom one sim card not dual sim???
Click to expand...
Click to collapse
Never tried using dual sim mod,as I only use one sim, that I didn't check.
cosminvr27 said:
Warning : I am not responsable for any bricked devices'.
Click to expand...
Click to collapse
Hi, i flashed cm13 and i wanna do flash for this build because of change tz number to get newer builds of cm.
Is it work on cm 13 or i must have stock rom before doing flash, accidentally i removed my stock rom i think, and twrp backup didn't restored my previous rom.
Pls help. Tnx.
Sent from my KIW-L21 using XDA-Developers mobile app
najafi.ali.68 said:
Hi, i flashed cm13 and i wanna do flash for this build because of change tz number to get newer builds of cm.
Is it work on cm 13 or i must have stock rom before doing flash, accidentally i removed my stock rom i think, and twrp backup didn't restored my previous rom.
Pls help. Tnx.
Click to expand...
Click to collapse
I'm not sure, I would try going back to stock rom first , as I not know how would it affect flashing over CM. Try to revert to stock first , than do update,than flash CM again.
cosminvr27 said:
I'm not sure, I would try going back to stock rom first , as I not know how would it affect flashing over CM. Try to revert to stock first , than do update,than flash CM again.
Click to expand...
Click to collapse
You're right, I'll do that, but i didn't get back tu stock rom in my life, if i wanna do that how? Its like flashing cm? I didn't find KIW-L21 C185 VERSION stock rom for download anywhere, i don't know why.
Thanks again for your help ?
Sent from my KIW-L21 using XDA-Developers mobile app
najafi.ali.68 said:
You're right, I'll do that, but i didn't get back tu stock rom in my life, if i wanna do that how? Its like flashing cm? I didn't find KIW-L21 C185 VERSION stock rom for download anywhere, i don't know why.
Thanks again for your help ?
Click to expand...
Click to collapse
Here it is
http://click.xda-developers.com/api...d 5.1_EMUI 3.1_C185B130_Kuwait_Channel-Others
You have to put it on the sd card in dload folder than hold volume - , volume + and power , and the rest does it by itself..also, after , make sure you update to b140 , as it will ask for it after you configure the phone.
Tried installing twrp but didn't boot
And in twrp 3-0-0 doesn't have option to flash images in cust or tz partitions
cosminvr27 said:
e.
8. Install, and in the bottom of the screen, choose install image as following:
I. BOOT.img install to Boot.
II. CUST.img install to cust_image.
III. SYSTEM.img install to system_image.
IV. TZ.img install to tz_image.
V. MODEM.img install to modem_image.
9. After installing all of the above files, just reboot and there it is.
Untill now, I haven't found any bugs or issues, except that in the 'About Phone' panel at Model Number it doesn't say anymore KIW-L21 , but says 'MSM8916 for arm64'.
Click to expand...
Click to collapse
Hi, when.i wanna flash cust.img its not a cust partition to flash on to it, what is wrong? Is sth with my phone or my twrp version (3.0.2.0)?
najafi.ali.68 said:
Hi, when.i wanna flash cust.img its not a cust partition to flash on to it, what is wrong? Is sth with my phone or my twrp version (3.0.2.0)?
Click to expand...
Click to collapse
What partitions do you see ?
cosminvr27 said:
What partitions do you see ?
Click to expand...
Click to collapse
Boot and recovery, it can be fixed?
najafi.ali.68 said:
Boot and recovery, it can be fixed?
Click to expand...
Click to collapse
But you did revert to stock , right ?
cosminvr27 said:
But you did revert to stock , right ?
Click to expand...
Click to collapse
Yes, i flashed cm build of 18july @crpalmer, for newer builds and FP i need mm base because of tz number, i revovered my twrp.backup to stock and when i want to do your steps i see this problem.
It could be because of version of twrp? I donno how to change twrp.
Thanks for your help.
najafi.ali.68 said:
Yes, i flashed cm build of 18july @crpalmer, for newer builds and FP i need mm base because of tz number, i revovered my twrp.backup to stock and when i want to do your steps i see this problem.
Thanks for your help.
Click to expand...
Click to collapse
Yes,but you got back to stock using the update.app or your recovery ? If You did recovery try force updating stock using the dload folder and the update.app.
cosminvr27 said:
Yes,but you got back to stock using the update.app or your recovery ? If You did recovery try force updating stock using the dload folder and the update.app.
Click to expand...
Click to collapse
I said that i got back to stock with twrp restore,that i think it means recovery you said and now
im on kiw-l21 c185.
I dont get that, you mean that i put stock rom in dload forder then what? Use local update in updater? It will work?
d
najafi.ali.68 said:
I said that i got back to stock to stock with twrp restore,that ithink.it means
recovery you said and now im on kiw-l21 c185
I dont get that, you mean that i put stock rom in dload forder then what? Use local update in updater? It will work?
d
Click to expand...
Click to collapse
Yes.
Download this https://mega.nz/#!Q0YQmIQD!KSwQvGymMUf-YA4A5oDFBvg12UwQlPDm5dIOdTDsEjc
You should be seeing either an archive either the update.app file, wich is the stock b130 rom.
Now, copy the update.app on the sd card into a folder called dload ( If you don't see it, just create it ).
Power off the phone, then press at the same time volume +, volume - and power and it should install the stock b130 rom. Next just do the update to b140 through the updater and reinstall twrp and try again .
If while updating you encounter any errors , try reinstalling stock recovery first.
cosminvr27 said:
Yes.
Download this https://mega.nz/#!Q0YQmIQD!KSwQvGymMUf-YA4A5oDFBvg12UwQlPDm5dIOdTDsEjc
You should be seeing either an archive either the update.app file, wich is the stock b130 rom.
Now, copy the update.app on the sd card into a folder called dload ( If you don't see it, just create it ).
Power off the phone, then press at the same time volume +, volume - and power and it should install the stock b130 rom. Next just do the update to b140 through the updater and reinstall twrp and try again .
If while updating you encounter any errors , try reinstalling stock recovery first.
Click to expand...
Click to collapse
Ok when i got home i'll do.that and tell what happened.
Thank you so much
I did a mistake in flashing in fastboot, and now my system is stuck in a bootloop.
I flashed my B180 with B574 (boot, cust, recovery and system.img), and now my phone won't boot. If someone has a firmware for B180, please link it, or if someone could help me in the step, please help me, since it's been two days and I can't use it. I'm on the end of my thread.
EDIT: Now it displays "Installing update" with 5%, and a USB symbol with an up sign. What to do...?
jaceleon said:
I did a mistake in flashing in fastboot, and now my system is stuck in a bootloop.
I flashed my B180 with B574 (boot, cust, recovery and system.img), and now my phone won't boot. If someone has a firmware for B180, please link it, or if someone could help me in the step, please help me, since it's been two days and I can't use it. I'm on the end of my thread.
EDIT: Now it displays "Installing update" with 5%, and a USB symbol with an up sign. What to do...?
Click to expand...
Click to collapse
Are you on single sim or dual sim?
Suleiman01 said:
Are you on single sim or dual sim?
Click to expand...
Click to collapse
Edit
I searched for B180 firmware and this is what I found. Did you flash p8 lite firmware on p8?
Dual sim, and the update.app inside the dload folder ( no sd card, just internal memory) belongs to b574. the .imgs i used on fastboot was extracted from the very same update.app.
And I am 100% sure that this belongs to an ALE-L21, as my brother successfully updated his B560 without going to fastboot, just by going to local update. But on my case I can't access it.
jaceleon said:
Dual sim, and the update.app inside the dload folder ( no sd card, just internal memory) belongs to b574. the .imgs i used on fastboot was extracted from the very same update.app.
And I am 100% sure that this belongs to an ALE-L21, as my brother successfully updated his B560 without going to fastboot, just by going to local update. But on my case I can't access it.
Click to expand...
Click to collapse
Here you can find almost all versions of firmware.
http://goo.gl/UZDrbe
Otherwise you can download it from Huawei's official website.
link doesnt work
Suleiman01 said:
Here you can find almost all versions of firmware.
http://goo.gl/UZDrbe
Otherwise you can download it from Huawei's official website.
Click to expand...
Click to collapse
the shortened link doesnt work.
gonna try this B560, and do this via fastboot, then local update then see where this goes.
jaceleon said:
the shortened link doesnt work.
gonna try this B560, and do this via fastboot, then local update then see where this goes.
Click to expand...
Click to collapse
It is working now. At least on my phone(using chrome). Use another browser.
Anyway this is the full link
http://www.carbontesla.com/firmware...e-ota-collection/huawei-p8-lite-firmware-ota/
Used the B560 firmware and flashed it by voulume + and -, and the local update fixed it like a charm.
jaceleon said:
Used the B560 firmware and flashed it by voulume + and -, and the local update fixed it like a charm.
Click to expand...
Click to collapse
Can you please type Solved in the title.
dunno how to do that. just lock it, if you wish. thanks again.
jaceleon said:
dunno how to do that. just lock it, if you wish. thanks again.
Click to expand...
Click to collapse
I can't only a moderator can lock it.
As the title says I have a uk p9lite with build ending in 132. I don't have access to a pc so is it possible to upgrade to nougat? If so any idea where this file located. I know I'll have to do it via dload method.
Thanks in advance
mr_sjs said:
As the title says I have a uk p9lite with build ending in 132. I don't have access to a pc so is it possible to upgrade to nougat? If so any idea where this file located. I know I'll have to do it via dload method.
Thanks in advance
Click to expand...
Click to collapse
HELLO
What is your region code?
VNS-L ??C???? B132
L31.c440.b132
mr_sjs said:
L31.c440.b132
Click to expand...
Click to collapse
Hello
I would test that.
Downloaded vns-l31c440b160.
2016.10.16 VNS-L31C440B160.
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v64110/f1/full/update.zip
Creates Dload file in SD card with update b160.app.
Then installs beta-test application to see.
If there is nothing, you should wait or ask for code bootloader and change region c432.
Thanks,iirc..this has a screen off mobile data bug right?
mr_sjs said:
Thanks,iirc..this has a screen off mobile data bug right?
Click to expand...
Click to collapse
sorry I do not understand.
C440b160 is latest update full emui 4.1.1 for your device.
mr_sjs said:
As the title says I have a uk p9lite with build ending in 132. I don't have access to a pc so is it possible to upgrade to nougat? If so any idea where this file located. I know I'll have to do it via dload method.
Thanks in advance
Click to expand...
Click to collapse
If u want to upgrade to Nougat then you should use a computer.. U can't automatically receive an update... Try with this: http://consumer.huawei.com/minisite/ro/beta/index.html Maybe it will work... it's an Beta app that u can easily use it. For manual installation u need to unlock your bootloader, flash TWRP recovery via fastboot, then flash in TWRP recovery the zip with the nougat firmware...
The app keeps saying login failed
Hi everyone, I installed RR on my P10 lite (WAS-LX1A) and all used to work great except for the sound so I thought that the ROM was not good and I began to reinstall the backup of EMUI I did with TWRP but without success. So I searched online the stock firmware and I found several versions and I tried to install one using a guide and It seemed to work until I began the first configuration of the device. Every time I finish the configuration It resends me to the beginning and I cannot install other firmwares because they stuck on 5% or it gives me "Installation failed". I cannot install TWRP too because fastboot says "command not allowed" when I try to flash it even if my bootloader and Phone Finder are unlocked. Please help me.
I succeded in installing EMUI bit it's NRD90M test keys. I found online some guides that say to use twrp in order to flash the full update. But I cannot install any twrp because when I go in fastboot mode it says:
Bootloader unlock (red)
FRP Lock (green)
you need restore device with dcphoenix(paid method)
For any steps of fastboot, need frp unlock.
rambik33 said:
For any steps of fastboot, need frp unlock.
Click to expand...
Click to collapse
fastboot oem unlock xxxxxxxxxxxxxxxxxxxxxx (bootloader code)
exilio99 said:
Hi everyone, I installed RR on my P10 lite (WAS-LX1A) and all used to work great except for the sound so I thought that the ROM was not good and I began to reinstall the backup of EMUI I did with TWRP but without success. So I searched online the stock firmware and I found several versions and I tried to install one using a guide and It seemed to work until I began the first configuration of the device. Every time I finish the configuration It resends me to the beginning and I cannot install other firmwares because they stuck on 5% or it gives me "Installation failed". I cannot install TWRP too because fastboot says "command not allowed" when I try to flash it even if my bootloader and Phone Finder are unlocked. Please help me.
Click to expand...
Click to collapse
Hello, you can not do nothing if either FRP or bootloader are locked. You can either use DC Unlocker to unlock the FRP lock or DC Phoenix To Flash The Stock Image all over again... or you can take it to repair for mainboard replacement. I reccomend that you unlock frp and then extract the stock firmware using huawei update extractor. You can get the firmware by installing Firmware Finder On your pc and then searching for an appropriate firmware.
Thanks, I succeeded installing a stock firmware I found online but there's another problem now. Some stock apps are missing just like the file gestor and the updater in settings. If I go in phone information it gives me that my firmware is NRD90m test-keys. What should do I do?
exilio99 said:
Thanks, I succeeded installing a stock firmware I found online but there's another problem now. Some stock apps are missing just like the file gestor and the updater in settings. If I go in phone information it gives me that my firmware is NRD90m test-keys. What should do I do?
Click to expand...
Click to collapse
missing some apps because of dead cust,vendor,product...etc.
You can restore your phone using stock system updater and huawei firmware finder's proxy server
update to your device firmware version's fullOTA
and you can back to stock!
tested with my was-lx2j
sorry for my bad english
I'll try it. Thank you!
hayabusa2yk said:
missing firmware because of dead cust,vendor,product...etc.
You can restore your phone using stock system updater and huawei firmware finder's proxy server
update to your device firmware version's fullOTA
and you can back to stock!
tested with my was-lx2j
sorry for my bad english
Click to expand...
Click to collapse
is it possible install apk from system/priv-app or similiar, i think is missed
foliaje said:
is it possible install apk from system/priv-app or similiar, i think is missed
Click to expand...
Click to collapse
Yes you can but no need to do it because it already installed.
Sorry for my bad English
hayabusa2yk said:
Yes you can but no need to do it because it already installed.
Sorry for my bad English
Click to expand...
Click to collapse
Excuse me but in 4th post, he hasn't an updater option in settings, in my second huawei(semi-breaked)
No updater, no file manager, no stock gapps(i dont care), build number system-5.1.78(fail to change oeminfo etc..) so tell me clearly like fix.
foliaje said:
Excuse me but in 4th post, he hasn't an updater option in settings, in my second huawei(semi-breaked)
No updater, no file manager, no stock gapps(i dont care), build number system-5.1.78(fail to change oeminfo etc..) so tell me clearly like fix.
Click to expand...
Click to collapse
try firmware updating with hisuite + huawei firmware finder's proxy
I tried but it's stopped at 5% of installation. I cannot do a update through the updater because it doesn't exist in this test version. Can I try something else?
I tried with hisuite and firmware finder using the proxy method but it can't find any update...