Related
Hello Everyone, I have ALE-L21 and my current firmware is C185B130 (apparently C185 is UAE region but i live in pakistan). Device is bootloader unlocked, rooted with TWRP installed.
I have a TWRP backup of current rom. I wanna try the 5.1 beta released for Europe but it says here ( http://forum.xda-developers.com/p8lite/general/beta-firmware-p8-lite-ale-l21-c432b008-t3243228 ) that i need C432B132 to upgrade to this. So I downloaded this firmware(C432B132) from Huawei website. There were two folders in it, dload and CUSTOM(not sure what that for). I extracted system.img, recovery.img, CUST.img, boot.img from UPDATE.APP given in the dload folder. So here is what i'm thinking.
1) Flashing the extracted system.img, recovery.img, CUST.img, boot.img would get me to C432B132?
2) After i install B132 can I upgrade to 5.1 using EMUI local update?
3) If something goes wrong, can I just flash TWRP and restore the backup?
-
Or this whole idea is foolish and i would screw up my phone after flashing system, cust and boot of some other firmware designed for some other region???
SobanAmin said:
Hello Everyone, I have ALE-L21 and my current firmware is C185B130 (apparently C185 is UAE region but i live in pakistan). Device is bootloader unlocked, rooted with TWRP installed.
I have a TWRP backup of current rom. I wanna try the 5.1 beta released for Europe but it says here ( http://forum.xda-developers.com/p8lite/general/beta-firmware-p8-lite-ale-l21-c432b008-t3243228 ) that i need C432B132 to upgrade to this. So I downloaded this firmware(C432B132) from Huawei website. There were two folders in it, dload and CUSTOM(not sure what that for). I extracted system.img, recovery.img, CUST.img, boot.img from UPDATE.APP given in the dload folder. So here is what i'm thinking.
1) Flashing the extracted system.img, recovery.img, CUST.img, boot.img would get me to C432B132?
2) After i install B132 can I upgrade to 5.1 using EMUI local update?
3) If something goes wrong, can I just flash TWRP and restore the backup?
-
Or this whole idea is foolish and i would screw up my phone after flashing system, cust and boot of some other firmware designed for some other region???
Click to expand...
Click to collapse
No this is wrong
1. You need to downgrade to B052
2. Install B136a
3. Install B008(Android 5.1.1)
After each install is recommended to make wipe
Thanks
sokkoban said:
No this is wrong
1. You need to downgrade to B052
2. Install B136a
3. Install B008(Android 5.1.1)
After each install is recommended to make wipe
Click to expand...
Click to collapse
I dont think that you need to go all the way to B052 and then flash the required version
This is what i did:
1) Flashed 132 cust, recovery, boot, system. My build number changed to something like balong ( I dont remember exactly :silly: ).
2) I flashed the UPDATE.APP file that was in the CUSTOM folder (that came with B132 rar file) via EMUI and it restored my build to B132.
3) Tried updating to 5.1 via EMUI but failed.
4) To give it a last try, I downloaded and flashed my phone with CUST, recovery, system, boot.img of B136a and then the update worked. My phone is now 5.1.1 B006
Thanks for the reply mate :good:
Confirmation ?
sobanamin said:
i dont think that you need to go all the way to b052 and then flash the required version
this is what i did:
1) flashed 132 cust, recovery, boot, system. My build number changed to something like balong ( i dont remember exactly :silly: ).
2) i flashed the update.app file that was in the custom folder (that came with b132 rar file) via emui and it restored my build to b132.
3) tried updating to 5.1 via emui but failed.
4) to give it a last try, i downloaded and flashed my phone with cust, recovery, system, boot.img of b136a and then the update worked. My phone is now 5.1.1 b006 :d
thanks for the reply mate :good:
Click to expand...
Click to collapse
i also have p8 lite c185b130 is this confirmly working ?
wahaj0892 said:
i also have p8 lite c185b130 is this confirmly working ?
Click to expand...
Click to collapse
yeah its working fine. I think the battery life has improved a little bit or maybe it is just because i haven't installed much apps after flashing this rom compared to when I was using the B130. The only thing i miss from B130 is that small 2g, 3g written on the signal bars. This one only shows the 2g or 3g network type when the mobile data is turned on. Huawei cloud is also not present in it so you may wanna backup your contacts and stuff
SobanAmin said:
yeah its working fine. I think the battery life has improved a little bit or maybe it is just because i haven't installed much apps after flashing this rom compared to when I was using the B130. The only thing i miss from B130 is that small 2g, 3g written on the signal bars. This one only shows the 2g or 3g network type when the mobile data is turned on. Huawei cloud is also not present in it so you may wanna backup your contacts and stuff
Click to expand...
Click to collapse
thanks for the reply ...
some more question do i need a unlock bootloader ?
secondly i have a wired problem while typing my phone has a double tap issue is that gone ?
Hello,
Double tap issue still present in beta
sokkoban said:
Hello,
Double tap issue still present in beta
Click to expand...
Click to collapse
I dont use it often so I cant tell for sure
please im on b130 (5.0.1)
can you tell me (step by step) how can i get (5.1.1) my (bootloader unlocked with stovk recovery) please please
mimoriich said:
please im on b130 (5.0.1)
can you tell me (step by step) how can i get (5.1.1) my (bootloader unlocked with stovk recovery) please please
Click to expand...
Click to collapse
Hello,
Read this post, will help you http://forum.xda-developers.com/showpost.php?p=63993458&postcount=3
sokkoban said:
Hello,
Read this post, will help you http://forum.xda-developers.com/showpost.php?p=63993458&postcount=3
Click to expand...
Click to collapse
please tell me how u flash it i putted dload file to sd card & i reeboted (home + vol down + vol up ) its said error
SobanAmin said:
I dont think that you need to go all the way to B052 and then flash the required version
This is what i did:
1) Flashed 132 cust, recovery, boot, system. My build number changed to something like balong ( I dont remember exactly :silly: ).
2) I flashed the UPDATE.APP file that was in the CUSTOM folder (that came with B132 rar file) via EMUI and it restored my build to B132.
3) Tried updating to 5.1 via EMUI but failed.
4) To give it a last try, I downloaded and flashed my phone with CUST, recovery, system, boot.img of B136a and then the update worked. My phone is now 5.1.1 B006
Thanks for the reply mate :good:
Click to expand...
Click to collapse
Can I apply this process for my ALE-L21C636B150...?
mimoriich said:
please tell me how u flash it i putted dload file to sd card & i reeboted (home + vol down + vol up ) its said error
Click to expand...
Click to collapse
If you are in stock recovery and have B132 try to put dload folder in internal memory and use software updater
Rifat Nurr said:
Can I apply this process for my ALE-L21C636B150...?
Click to expand...
Click to collapse
No, you can't. This beta is only for B136a(may be work also in B132)
sokkoban said:
Hello,
Double tap issue still present in beta
Click to expand...
Click to collapse
what about b170 ??
SobanAmin said:
I dont think that you need to go all the way to B052 and then flash the required version
This is what i did:
1) Flashed 132 cust, recovery, boot, system. My build number changed to something like balong ( I dont remember exactly :silly: ).
2) I flashed the UPDATE.APP file that was in the CUSTOM folder (that came with B132 rar file) via EMUI and it restored my build to B132.
3) Tried updating to 5.1 via EMUI but failed.
4) To give it a last try, I downloaded and flashed my phone with CUST, recovery, system, boot.img of B136a and then the update worked. My phone is now 5.1.1 B006
Thanks for the reply mate :good:
Click to expand...
Click to collapse
can i flash c136a direcly over c185b130
MAYBE
wahaj0892 said:
can i flash c136a direcly over c185b130
Click to expand...
Click to collapse
Give It a try. If i doesn't work then you can just flash 132->136 and then apply update. But there maybe some problem with the version number changing to "BALONG". I faced this problem when I flashed 132 over my 130 but then I applied UPDATE.APP file(the small file in the custom folder) via EMUI Updater and it fixed the version number. But the 136a rom did not had any UPDATE.APP in custom folder so I dont know what to do if you get a version number problem. You can try flashing the 5.1 update via EMUI and maybe it will fix the version number problem (if it happened in the first place) or you can always goto 132->136 and apply 5.1
wahaj0892 said:
thanks for the reply ...
some more question do i need a unlock bootloader ?
secondly i have a wired problem while typing my phone has a double tap issue is that gone ?
Click to expand...
Click to collapse
yes you need to unlock the boot loader. What exactly do you mean by double tap issue? are you talking about the double tap to wake feature not working sometimes? Yes the DoubletapToWake dont works sometime which can be very annoying so I just disabled that feature and using the power button ever since. As for the typing issue, No I'm not facing any typing issues, never did on the B130 and not on this 5.1 version. Try using someother keyboard app?
SobanAmin said:
yes you need to unlock the boot loader. What exactly do you mean by double tap issue? are you talking about the double tap to wake feature not working sometimes? Yes the DoubletapToWake dont works sometime which can be very annoying so I just disabled that feature and using the power button ever since. As for the typing issue, No I'm not facing any typing issues, never did on the B130 and not on this 5.1 version. Try using someother keyboard app?
Click to expand...
Click to collapse
it is related to typing .. fast typing cause this issue .. i tired many apps nothing fix the issue
wahaj0892 said:
can i flash c136a direcly over c185b130
Click to expand...
Click to collapse
I tried to install b132 and b136a on my c185b130 but it failed both times.
---------- Post added at 06:27 PM ---------- Previous post was at 06:22 PM ----------
SobanAmin said:
Give It a try. If i doesn't work then you can just flash 132->136 and then apply update. But there maybe some problem with the version number changing to "BALONG". I faced this problem when I flashed 132 over my 130 but then I applied UPDATE.APP file(the small file in the custom folder) via EMUI Updater and it fixed the version number. But the 136a rom did not had any UPDATE.APP in custom folder so I dont know what to do if you get a version number problem. You can try flashing the 5.1 update via EMUI and maybe it will fix the version number problem (if it happened in the first place) or you can always goto 132->136 and apply 5.1
Click to expand...
Click to collapse
I have c185b130, there is c185b131 update on consumer.huawei.com for UAE region uploaded on 31-12-2015, will it work on my device? What are the changes in c185b130 and c185b131?
hello
i have i bricked p9lite now i guess
why it happend i was on android 7.0 nougat beta version but bluetooth was not working good etc so i was trying to get 6.0 back well there happend somthing wrong i completed erase my phone for some reason
and get couple errors in twrp when i trying to install any firmware errors are: 7 and 134
i have twrp nougat and fastboot
and phone have no os atm
and have a unlocked bootloader and have code if needed
sombody can help me plz can't figure it out now
mayby thanks arrowbow
First of all...
Restore your TWRP backup to get your OS back to work.
To downgrade from Nougat, you really need the RIGHT files.
So start by telling us which phone you have (L31 or 21?).
if you haveb't a twrp backup you can go to fastboot and flash system.img boot.img cust.img and recovery.img
Yea, but before flash oeminfo via twrp
k i have huawei vns-l31 i don't have any backup so thats the problem i forgot to make it thats kinda dumb
i only have some .zip file no .img files
Flash OEMinfo, then install version B150 (for me, it ONLY worked with B150 no other version) with the three button method.
Copy the update.app into DLOAD of your SD card with mounting storage in TWRP.
Schlengge said:
Flash OEMinfo, then install version B150 (for me, it ONLY worked with B150 no other version) with the three button method.
Copy the update.app into DLOAD of your SD card with mounting storage in TWRP.
Click to expand...
Click to collapse
k wait how i flash oeminfo in it ? in bootloader or twrp and can you give me a link for the correct oeminfo file plz i don't wanna do somthing wrong now
arrowbow said:
k wait how i flash oeminfo in it ? in bootloader or twrp and can you give me a link for the correct oeminfo file plz i don't wanna do somthing wrong now
Click to expand...
Click to collapse
Flashable zip file that can be flashed in TWRP.
Link can be found here in the OP https://forum.xda-developers.com/huawei-p9lite/how-to/nougat-official-firmware-t3512932
Look at the rollback section.
arrowbow said:
k wait how i flash oeminfo in it ? in bootloader or twrp and can you give me a link for the correct oeminfo file plz i don't wanna do somthing wrong now
Click to expand...
Click to collapse
trying to find b150 but any site won't let me do you have some mediafire or a site can't find b150
Schlengge said:
Flashable zip file that can be flashed in TWRP.
Link can be found here in the OP https://forum.xda-developers.com/huawei-p9lite/how-to/nougat-official-firmware-t3512932
Look at the rollback section.
Click to expand...
Click to collapse
k let me look
or i am retarded or i really can't see the rollback section for oeminfo
arrowbow said:
trying to find b150 but any site won't let me do you have some mediafire or a site can't find b150
Click to expand...
Click to collapse
Nope don't have it I am on Lineage OS now so deleted all my stock related stuff.
Look at the HTC mania thread, the Spanish one. It is linked several times in these Nougat threads. They have a link to a collection of firmwares where there is also B150 for download.
Use a translator to find the link for L31 firmwares.
Schlengge said:
Nope don't have it I am on Lineage OS now so deleted all my stock related stuff.
Look at the HTC mania thread, the Spanish one. It is linked several times in these Nougat threads. They have a link to a collection of firmwares where there is also B150 for download.
Use a translator to find the link for L31 firmwares.
Click to expand...
Click to collapse
k got the b150 firmware update.zip only i really can't find a oeminfo yet only for vns 21 or somthing
nvm i have C432OemInfo-DUALSIM-P9LITE.zip thats the right file right ?
arrowbow said:
nvm i have C432OemInfo-DUALSIM-P9LITE.zip thats the right file right ?
Click to expand...
Click to collapse
Yes.
Schlengge said:
Yes.
Click to expand...
Click to collapse
k so i flash that oeminfo in twrp right ?
arrowbow said:
k so i flash that oeminfo in twrp right ?
Click to expand...
Click to collapse
i did flash that oeminfo zip in twrp i got this
mount -o bind '/data/media' '/sdcard' process ended with ERROR: 134
arrowbow said:
k so i flash that oeminfo in twrp right ?
Click to expand...
Click to collapse
First, put the update.app from B150 into your SD card in the DLOAD folder.
Then flash OEM, then turn off device and turn back on with all three buttons pressed.
Schlengge said:
First, put the update.app from B150 into your SD card in the DLOAD folder.
Then flash OEM, then turn off device and turn back on with all three buttons pressed.
Click to expand...
Click to collapse
k let me try it sec
Hi guys, i updated my VNS-L31 into nougat test-key, i wanted to downgrade to stock MM because there's a lot of bugs, when i'm trying to install img file from fastboot, it always failed and i saw in my phone "Phone LOCKED" it was previously unlocked. Can anyone help my unlocking my device with
L31-900B300 build number? thanks!
kevshots said:
Hi guys, i updated my VNS-L31 into nougat test-key, i wanted to downgrade to stock MM because there's a lot of bugs, when i'm trying to install img file from fastboot, it always failed and i saw in my phone "Phone LOCKED" it was previously unlocked. Can anyone help my unlocking my device with
L31-900B300 build number? thanks!
Click to expand...
Click to collapse
Use the same unlock code you've used before, get it again.
And why are you using that build B300, you could have at leasT tried B336, which in my opinion isn't having any problems noticeable, battery drain also good...people complain about this, but if you know what you're doing this will never be an issue.
_New World Order (NWO)_
Thanks for the response, I'll try tomorrow, i've already forgotten and deleted the code. Actually, it's all misunderstanding on why i flashed this build lol. I am planning to revert to MM stock and i'm still looking for some guide on how to. I tried other methods and didn't get luck. If you have any ideas would you mind helping me again? Thanks!
kevshots said:
Thanks for the response, I'll try tomorrow, i've already forgotten and deleted the code. Actually, it's all misunderstanding on why i flashed this build lol. I am planning to revert to MM stock and i'm still looking for some guide on how to. I tried other methods and didn't get luck. If you have any ideas would you mind helping me again? Thanks!
Click to expand...
Click to collapse
Follow this https://forum.xda-developers.com/showthread.php?p=71203214 and you should find what you need, if still confused, just sent a PM or post here.
_New World Order (NWO)_
[email protected] said:
Follow this https://forum.xda-developers.com/showthread.php?p=71203214 and you should find what you need, if still confused, just sent a PM or post here.
_New World Order (NWO)_
Click to expand...
Click to collapse
Yeah I've already seen this and i'm not sure on what to download, i tried once but it says
"software install failed!"
"Incompatibility with the current version.
Please download the correct update package."
and i can't still unlock my bootloader, the website is new, and it won't redirect me to unlocking SITE from this thread LINK.
also just wondering, in this method, is it require to unlock the bootloader ? thank you so much for helping me.
kevshots said:
Yeah I've already seen this and i'm not sure on what to download, i tried once but it says
"software install failed!"
"Incompatibility with the current version.
Please download the correct update package."
and i can't still unlock my bootloader, the website is new, and it won't redirect me to unlocking SITE from this thread LINK.
also just wondering, in this method, is it require to unlock the bootloader ? thank you so much for helping me.
Click to expand...
Click to collapse
This method don't require unlocked bootloader, don't require TWRP.
Just get the rollback file and full MM update file.
Install rollback first then MM file after, put the extracted update.app files In the dload folder on root of sdcard, one by one after each install
Or
If you don't want to use rollback file, unlock bootloader, then flash patched oeminfo file via:
1.fastboot using this command: fastboot flash oeminfo xxx (xxx= name of oemifo zip you have, ie. fastboot flash oeminfo C432oeminfoDual.zip)
Or
2.while In fastboot flash revolution nougat recovery, then boot into it by "vol up + power" then flash the patched oeminfo,
Then once flashed OEMINFO then install via 3 buttons mode the update.app of your firmware, this must be in dload folder on sdcard as above.if asked for password then use "reset"
_New World Order (NWO)_
[email protected] said:
Follow this https://forum.xda-developers.com/showthread.php?p=71203214 and you should find what you need, if still confused, just sent a PM or post here.
_New World Order (NWO)_
Click to expand...
Click to collapse
[email protected] said:
This method don't require unlocked bootloader, don't require TWRP.
Just get the rollback file and full MM update file.
Install rollback first then MM file after, put the extracted update.app files In the dload folder on root of sdcard, one by one after each install
Or
If you don't want to use rollback file, unlock bootloader, then flash patched oeminfo file via:
1.fastboot using this command: fastboot flash oeminfo xxx (xxx= name of oemifo zip you have, ie. fastboot flash oeminfo C432oeminfoDual.zip)
Or
2.while In fastboot flash revolution nougat recovery, then boot into it by "vol up + power" then flash the patched oeminfo,
Then once flashed OEMINFO then install via 3 buttons mode the update.app of your firmware, this must be in dload folder on sdcard as above.if asked for password then use "reset"
_New World Order (NWO)_
Click to expand...
Click to collapse
I was able to revert to MM using this HUAWEI P9 Lite Firmware i don't know how, but it worked today. LOL, lastly, i just have a question to revolutionaryTWRP, i tried it once when i was having problem with ROM, and it couldn't even mount internal storage, but for other people i saw here in xda, they can even flash zip files from it. just wondering if there are other Revolutionary TWRP versions or it's all about the tutorial on using RevolutionaryTWRP? anyways, thank you so much again. and how can i tag this thread as solved by the way?
kevshots said:
I was able to revert to MM using this HUAWEI P9 Lite Firmware i don't know how, but it worked today. LOL, lastly, i just have a question to revolutionaryTWRP, i tried it once when i was having problem with ROM, and it couldn't even mount internal storage, but for other people i saw here in xda, they can even flash zip files from it. just wondering if there are other Revolutionary TWRP versions or it's all about the tutorial on using RevolutionaryTWRP? anyways, thank you so much again. and how can i tag this thread as solved by the way?
Click to expand...
Click to collapse
Edit title to solved.
The current TWRP by Revolution for nougat can't mount /data partition, and if you need flash anything there, you've got to change filesystem as advised In the tutorials, but you can flash mods or apps to system partition without problems....this problem is In nougat TWRP only currently, MM TWRP has no issues at all...anyways good to hear your sorted!
_New World Order (NWO)_
[email protected] said:
Edit title to solved.
The current TWRP by Revolution for nougat can't mount /data partition, and if you need flash anything there, you've got to change filesystem as advised In the tutorials, but you can flash mods or apps to system partition without problems....this problem is In nougat TWRP only currently, MM TWRP has no issues at all...anyways good to hear your sorted!
_New World Order (NWO)_
Click to expand...
Click to collapse
okay, Thank you so much danerrickcuba for helping me out. :good: :highfive:
Hello, the problem is what i want restore my Huawei p9 Lite vns-l23c212 but i have installed the EliteRom and the TWRP Elite, so i dont have the partitions (cust, vendor..) and not have a backup of that.
So I downloaded the Find firmware and i downloaded my Huawei version, but i dont have a idea of how install the .zip, i tried using fastboot but when i want install the partitions (cust,vendor..) the console give me a error saying "vendor command failed" or some
I want help from us, sorry for the bad english, im waiting ur comments
Hello,
use rollback method.
First revert your DATA filesystem from
F2FS to EXT4 using TWRP, then follow guide
in UNIFIED HELP THREAD..
Here the link..
https://forum.xda-developers.com/huawei-p9lite/how-to/unified-help-thread-huawei-p9-lite-t3649152
Read carefully, you need L23C212 rollback...
Regards.
Hey
so i have to install the emiui4.1 and then update the huawei until reach to the emui5
Sertinium said:
so i have to install the emiui4.1 and then update the huawei until reach to the emui5
Click to expand...
Click to collapse
Yes, the rollback package will give you
c900 global firmware. From there install
B160 for dual sim, B161 for single sim..
When you will stay with this firmware,
update using updater stock or use Firmware Finder..
Follow the guide..
Regards..
Edit: sorry B160 and B161 are firmware persent in C432 Europe area-
Dont know the one for your cust/region (C212).
Let google do the work for you..
Dadditz said:
Edit: sorry B160 and B161 are firmware persent in C432 Europe area-
Dont know the one for your cust/region (C212).
Let google do the work for you..
Click to expand...
Click to collapse
Okay but the problem now is what in number of compilation say nrd90m test keys and i installed the firmware of my phone
Sertinium said:
Okay but the problem now is what in number of compilation say nrd90m test keys and i installed the firmware of my phone
Click to expand...
Click to collapse
Hello,
according with the guide you flashed
wrong package...
You need FULL OTA UPDATE package, it must be
1.7/1.9 gbytes in size wich cames with data..
Flash new one or repeat the whole process.
I found this firmware on internet,
but do not assume any responsability.
If you want give a try here the direct download..
Check it with an antivirus/antimalware software..
http://download-c.huawei.com/download/downloadCenter?downloadId=92443&version=361914&siteCode=mx
If all will go in the right direction at the end
reboot to e-recovery (vol+ + Power)
and make a factory reset.
Hope this time will work..
Best regards
Dadditz said:
Hello,
according with the guide you flashed
wrong package...
You need FULL OTA UPDATE package, it must be
1.7/1.9 gbytes in size wich cames with data..
Flash new one or repeat the whole process.
I found this firmware on internet,
but do not assume any responsability.
If you want give a try here the direct download..
Check it with an antivirus/antimalware software..
http://download-c.huawei.com/download/downloadCenter?downloadId=92443&version=361914&siteCode=mx
If all will go in the right direction at the end
reboot to e-recovery (vol+ + Power)
and make a factory reset.
Hope this time will work..
Best regards
Click to expand...
Click to collapse
Hello, I have already downloaded that file and I already flashed it but the compilation says that it is C900B130 .... instead of C212B130, so how do I change the cust to C212 ?, because with the other I can not receive the update of emui5, and if the effort with the Finder Firmware gives me the NRD90M test keys.
Sorry for the inconvenience
Sertinium said:
Hello, I have already downloaded that file and I already flashed it but the compilation says that it is C900B130 .... instead of C212B130, so how do I change the cust to C212 ?, because with the other I can not receive the update of emui5, and if the effort with the Finder Firmware gives me the NRD90M test keys.
Sorry for the inconvenience
Click to expand...
Click to collapse
Hello man,
really dont know if i badly explained..
My friend to bring back to MM
you have to strictly follow the guide i posted you..
So you need VNS-L23C212 rollback package then
extract update.app, create a "dload" folder in SD and
pur in it. Turn off and proceed with three buttons method*****
When finished you will have C900 firmware..
(that's a LIMBO firmware)
Delete update.app from SD card...(not dload folder)
Now take tour VNL-L23C212Bxxx firmware,
extract update.app, put in dload folder in SD card
and repeat with three buttons metod.
If all take right direction at end of flash, after booting,
reboot to e-recovery (vol up+ power button) and make a factory reset. Now you have MM firmware..
That's the guide say...
*****= vol up+vol down+power button until It start flashing
That's all my friend...
The other way is to flash L23C212 oeminfo.zip (if you find It)
with TWRP, then VNS-L23C212Bxxx with dload and three
button method. At the end factory reset..
Best regards
same problem,
Dadditz said:
Hello man,
really dont know if i badly explained..
My friend to bring back to MM
you have to strictly follow the guide i posted you..
So you need VNS-L23C212 rollback package then
extract update.app, create a "dload" folder in SD and
pur in it. Turn off and proceed with three buttons method*****
When finished you will have C900 firmware..
(that's a LIMBO firmware)
Delete update.app from SD card...(not dload folder)
Now take tour VNL-L23C212Bxxx firmware,
extract update.app, put in dload folder in SD card
and repeat with three buttons metod.
If all take right direction at end of flash, after booting,
reboot to e-recovery (vol up+ power button) and make a factory reset. Now you have MM firmware..
That's the guide say...
*****= vol up+vol down+power button until It start flashing
That's all my friend...
The other way is to flash L23C212 oeminfo.zip (if you find It)
with TWRP, then VNS-L23C212Bxxx with dload and three
button method. At the end factory reset..
Best regards
Click to expand...
Click to collapse
same problem but it shows update package does not exist.
muhammad22295bilal said:
same problem but it shows update package does not exist.
Click to expand...
Click to collapse
Hello dude please type here your phone model and firmware you're currently using.
Have a happy holidays
unable to mount vendor.
Dadditz said:
Hello dude please type here your phone model and firmware you're currently using.
Have a happy holidays
Click to expand...
Click to collapse
i have installed twrp, creat backup and went on to change the cust to 185 from c432. its bricked , i restored my backup but it went in boot loop with huawei logo, then i want to install coustom rom it said
"failed to mount '/vendor '(invalid argument) "
"failed to mount '/product '(invalid argument) "
its not end yet then i factory reset , restore again this time it doesnt goes to boot loop, but an error message "unable to wipe vendor"
__**** files attached****___
muhammad22295bilal said:
i have installed twrp, creat backup and went on to change the cust to 185 from c432. its bricked , i restored my backup but it went in boot loop with huawei logo, then i want to install coustom rom it said
"failed to mount '/vendor '(invalid argument) "
"failed to mount '/product '(invalid argument) "
its not end yet then i factory reset , restore again this time it doesnt goes to boot loop, but an error message "unable to wipe vendor"
__**** files attached****___
Click to expand...
Click to collapse
Dear user,
I really would like to help you, but do you really want it?
You were stuck on the update problem, you did it on your own and now you have TWRP and backup problems.
Also you did not answer any of my questions,
for me it's ok, but how can someone help you?
Good luck dear ..
Greetings
vns-l21c432 and p9 lite
Dadditz said:
Dear user,
I really would like to help you, but do you really want it?
You were stuck on the update problem, you did it on your own and now you have TWRP and backup problems.
Also you did not answer any of my questions,
for me it's ok, but how can someone help you?
Good luck dear ..
Greetings
Click to expand...
Click to collapse
p9 lite with vns-l21
muhammad22295bilal said:
p9 lite with vns-l21
Click to expand...
Click to collapse
Complete firmware please...
VNS-L21C432B??
TWRP you are using ?
What you're planning to do...
Wish you have a stock firmware / rebrand to C185
or flash a custom roms.
vns-l21c432b504
Dadditz said:
Complete firmware please...
VNS-L21C432B??
TWRP you are using ?
What you're planning to do...
Wish you have a stock firmware / rebrand to C185
or flash a custom roms.
Click to expand...
Click to collapse
the installed frimware was vns-l21c432b504 , then i want to go back to c185 so i installed twrp to make my phone root and to install c185 , it shows error i took restore of backup and phone goes to boot loop with huawei logo, then i again restore failed again. simply i have
p9lite
twrp recovery 3.1.1.0
when i restore my back up at last it shows "unable to wipe vendor" , but when i install other imges file it shows
"unable to mount vendor "
"unable to mount product".
now i just want my working phone back please healp
muhammad22295bilal said:
the installed frimware was vns-l21c432b504 , then i want to go back to c185 so i installed twrp to make my phone root and to install c185 , it shows error i took restore of backup and phone goes to boot loop with huawei logo, then i again restore failed again. simply i have
p9lite
twrp recovery 3.1.1.0
when i restore my back up at last it shows "unable to wipe vendor" , but when i install other imges file it shows
"unable to mount vendor "
"unable to mount product".
now i just want my working phone back please healp
Click to expand...
Click to collapse
Hello dear,
We will try to make your last one work
system, ie the L21C432B504.
Do you still have access to the system?
Do you have access to TWRP?
Do you have access to fastboot?
You have tried to install the oeminfo file
and this may have closed the bootloader,
so I invite you first, even if it says that it is unlocked, to re-unlock it,
but not before you have made backups of your stuff, as a factory reset will be done.
Reply me when you ready ...
here is your answers brother.
Dadditz said:
Hello dear,
We will try to make your last one work
system, ie the L21C432B504.
Do you still have access to the system?
Do you have access to TWRP?
Do you have access to fastboot?
You have tried to install the oeminfo file
and this may have closed the bootloader,
so I invite you first, even if it says that it is unlocked, to re-unlock it,
but not before you have made backups of your stuff, as a factory reset will be done.
Reply me when you ready ...
Click to expand...
Click to collapse
no access to system,
access to twrp
access to fasatboot
bootloader and phone both unlocked.
muhammad22295bilal said:
no access to system,
access to twrp
access to fasatboot
bootloader and phone both unlocked.
Click to expand...
Click to collapse
Ok dude reboot to fastboot and
unlock again your bootloader.
After factory reset see if have access to system...
Tell me...
no access to system.
Dadditz said:
Ok dude reboot to fastboot and
unlock again your bootloader.
After factory reset see if have access to system...
Tell me...
Click to expand...
Click to collapse
after unlock bootloader , cant access to system
Hey guys, I've somehow managed to brick my device while I was half asleep. Now I've installed just the UPDATED.app by using the dload method, this worked but I'm facing the issue of not having bluetooth work. I've tried several update files but the result is either that it flashes and it doesnt work correctly still, or it doesnt flash at all. I've only ever flashed the updated.app from the update.zip, but I haven't touched anything else, including the update_data_full_public.zip or update_full_VNS-L31_hw_eu. Is there a way to use the dload method of some sort to freshly install the firmware correctly? Right now I'm sitting on region C432 and B371. Any help is appreciated!
driftmaniac7 said:
Hey guys, I've somehow managed to brick my device while I was half asleep. Now I've installed just the UPDATED.app by using the dload method, this worked but I'm facing the issue of not having bluetooth work. I've tried several update files but the result is either that it flashes and it doesnt work correctly still, or it doesnt flash at all. I've only ever flashed the updated.app from the update.zip, but I haven't touched anything else, including the update_data_full_public.zip or update_full_VNS-L31_hw_eu. Is there a way to use the dload method of some sort to freshly install the firmware correctly? Right now I'm sitting on region C432 and B371. Any help is appreciated!
Click to expand...
Click to collapse
Use rollback package, go back to A6, flash via dload C432B161 (A6 firmware for your phone), factory reset, and try update to Nougat via OTA or via Firmware finder.
You can't flash Nougat FW via dload.
bozka1 said:
Use rollback package, go back to A6, flash via dload C432B161 (A6 firmware for your phone), factory reset, and try update to Nougat via OTA or via Firmware finder.
You can't flash Nougat FW via dload.
Click to expand...
Click to collapse
I've looked for the B161 one, I have found one although it doesn't really work as it says "incompatible versions" in the dload method, am I doing something wrong or am I forgetting something? I'm using the one from this website https://www.gizrom.com/b161-emui-4-1-huawei-p9-lite-android-6-0/
driftmaniac7 said:
I've looked for the B161 one, I have found one although it doesn't really work as it says "incompatible versions" in the dload method, am I doing something wrong or am I forgetting something? I'm using the one from this website https://www.gizrom.com/b161-emui-4-1-huawei-p9-lite-android-6-0/
Click to expand...
Click to collapse
Which version have you, VNS-L21?
bozka1 said:
Which version have you, VNS-L21?
Click to expand...
Click to collapse
VNS-L31, dual sim one
driftmaniac7 said:
VNS-L31, dual sim one
Click to expand...
Click to collapse
Strange, if your phone is dual SIM, B371 is wrong FW, it's for single SIM, okay, if you have dual, download rollback package for L-31:
http://download-c1.huawei.com/download/downloadCenter?downloadId=93789&version=373429&siteCode=sk
and VNS-L31C432B160:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66034/f1/full/update.zip
Now unpack rollback package, and paste update.app in the dload folder on SD card and flash using three button combo.
Remove rollback from dload folder, unpack B160 and paste update.app in dload, and flash (button combo). Factory reset and voila! you are on Marsmallow .
bozka1 said:
Strange, if your phone is dual SIM, B371 is wrong FW, it's for single SIM, okay, if you have dual, download rollback package for L-31:
http://download-c1.huawei.com/download/downloadCenter?downloadId=93789&version=373429&siteCode=sk
and VNS-L31C432B160:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66034/f1/full/update.zip
Now unpack rollback package, and paste update.app in the dload folder on SD card and flash using three button combo.
Remove rollback from dload folder, unpack B160 and paste update.app in dload, and flash (button combo). Factory reset and voila! you are on Marsmallow .
Click to expand...
Click to collapse
I just did them, I think I was missing the rollback package. Bluetooth does work, as everything else. I think there should be an option to update, however I'm not sure which version I should find on the huawei firmware finder. The normal Updater doesn't seem to have an update (yet, I'm not sure if it'll pop up either). Any idea which is the most recent one that I can try? As I thought b371 was good but apparantly its single sim Thank you!
driftmaniac7 said:
I just did them, I think I was missing the rollback package. Bluetooth does work, as everything else. I think there should be an option to update, however I'm not sure which version I should find on the huawei firmware finder. The normal Updater doesn't seem to have an update (yet, I'm not sure if it'll pop up either). Any idea which is the most recent one that I can try? As I thought b371 was good but apparantly its single sim Thank you!
Click to expand...
Click to collapse
If you are now on B160, and can't update to Nougat via OTA (dont forget insert SIM card into phone), use Firmware finder, and send to update this FW: VNS-L31C432B370 FullOTA-MF-PV. "PV" is very important! No.: 80460 . And check firmware accses for your phone with IMEI.
bozka1 said:
If you are now on B160, and can't update to Nougat via OTA (dont forget insert SIM card into phone), use Firmware finder, and send to update this FW: VNS-L31C432B370 FullOTA-MF-PV. "PV" is very important! No.: 80460 . And check firmware accses for your phone with IMEI.
Click to expand...
Click to collapse
I think I found that one, why was the PV important? Does it contain stuff that I was missing? I've also checked it with the firmware access, it seems it's working with the updater. It's still downloading, but I think it'll work. In any case thank you!
driftmaniac7 said:
I think I found that one, why was the PV important? Does it contain stuff that I was missing? I've also checked it with the firmware access, it seems it's working with the updater. It's still downloading, but I think it'll work. In any case thank you!
Click to expand...
Click to collapse
It did work, there is another update waiting though, is it safe to update to the 380 version?
driftmaniac7 said:
It did work, there is another update waiting though, is it safe to update to the 380 version?
Click to expand...
Click to collapse
You can now update the newest approved FW (for dual SIM )
bozka1 said:
You can now update the newest approved FW (for dual SIM )
Click to expand...
Click to collapse
Aye I noticed, I had lots of updates, I updated the thing 5 times now I ended up on 40x,. Thank you for the help!
driftmaniac7 said:
Aye I noticed, I had lots of updates, I updated the thing 5 times now I ended up on 40x,. Thank you for the help!
Click to expand...
Click to collapse
You’re welcome