Hello.
I check some guides how to change csc on my note 4 but i cant :/
I stuck on MET (and i flashing ORX firmware N910FXXU1DPE1_N910FOXX1DPE1_N910FXXU1DPB1 :/ ) My original CSC its TMS ( Slovakia T-mobile branded)
How i do it:
Over samfirm i download 6.0.1 ORX FW
In recovery Wipe phone and restart to download mode
Open odin 3.11
IN Ap load FW and press start.
First time when i flash FW i was still on TMS. After few Flash its chance to MET :/
Any tips trick how to solve my issue?
Vybramo said:
Hello.
I check some guides how to change csc on my note 4 but i cant :/
I stuck on MET (and i flashing ORX firmware N910FXXU1DPE1_N910FOXX1DPE1_N910FXXU1DPB1 :/ ) My original CSC its TMS ( Slovakia T-mobile branded)
How i do it:
Over samfirm i download 6.0.1 ORX FW
In recovery Wipe phone and restart to download mode
Open odin 3.11
IN Ap load FW and press start.
First time when i flash FW i was still on TMS. After few Flash its chance to MET :/
Any tips trick how to solve my issue?
Click to expand...
Click to collapse
I'm not sure whether this helps but: there is a file under /efs/IMEI called "mps_code.dat" Within this file there's a CSC code. Is yours MET in this file? Maybe you can restore you original CSC if you have an EFS backup?
yesteryearisoverhere said:
I'm not sure whether this helps but: there is a file under /efs/IMEI called "mps_code.dat" Within this file there's a CSC code. Is yours MET in this file? Maybe you can restore you original CSC if you have an EFS backup?
Click to expand...
Click to collapse
I can restore it to TMS by kies but i want ORX ....
can anybody help me how to set it to orx without root?
Related
Hi everyone,
this maybe a very noob question but how do you change the CSC on the S4?
I recently flashed an unbranded UK firmware onto my Australian S4, back with my old phone, I was able to change the CSC with *#272*IMEI# though that doesn't seem to work now. So any ideas? Any help would be greatly appreciated. I want to change the CSC to a UK CSC so I'll be able to receive updates OTA or through kies.
1.Download the appropriate firmware for your region from sammobile.
2.Extract Hidden.img and cache.img
3.Now compress these two files together into a .Tar file.
4.Flash this in PDA section of Odin
5.You now have correct CSC
Sent from my GT-I9305 using XDA Premium HD app
Is anyone having trouble changing their CSC?
I've flashed the pre-rooted UK Firmware, and used CSC Changer to set the CSC to BTU.
It automatically re-boots, but the CSC hasn't changed.
I boot into recovery and perform a F.Reset, and the CSC still doesn't change to BTU.
As far as I can tell, I'm following all instructions correctly from here.
http://forum.xda-developers.com/showthread.php?t=2250824
"If someone want to change CSC, please use this app: Samsung Galaxy S2/S3 CSC
After using this app you MUST reboot into RECOVERY for the changes to take place.
Don't worry if you see some errors in recovery, it's NORMAL as "hidden.img" is excluded..
WORKS perfectly! TESTED!! "
I don't know what I'm doing wrong, and I'm getting increasingly frustrated!
Obagleyfreer said:
1.Download the appropriate firmware for your region from sammobile.
2.Extract Hidden.img and cache.img
3.Now compress these two files together into a .Tar file.
4.Flash this in PDA section of Odin
5.You now have correct CSC
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
Tried that without success. Got a failure in Odin.
There's no hidden.img nor cache.img but hidden.img.ext4 and cache.img.ext4. Are these the correct files?
I downloaded latest btu UK firmware
Loaded with odin
Did a factory reset
Switched if and then went into recovery mode
Rebooted and btu was activated
I was not rooted
Sent from my GT-I9505 using xda premium
Lipito said:
Tried that without success. Got a failure in Odin.
There's no hidden.img nor cache.img but hidden.img.ext4 and cache.img.ext4. Are these the correct files?
Click to expand...
Click to collapse
they are just ext4 formats so u could mount it on linux or something else..
use mkuserimg.sh command to convert
I'm also interested in this. I also changed from Australian firmware to UK. Since changing I've noticed HD voice (wb amr) is off (check by typing *#0011# into dialer then menu key>back>menu key>key input >enter '1' then wait till menu appears >WB AMR Status.)
Prior to changing roms both WB AMR Setting and UTMS WB was On. Now they're both off. I did some searching and apparently its tied to the CSC.
so.....how do we change csc to s4? i have installed unbranded rom, wiped but csc remained the same. how de we change this?
I9505 stuck with wrong CSC
gangstar said:
so.....how do we change csc to s4? i have installed unbranded rom, wiped but csc remained the same. how de we change this?
Click to expand...
Click to collapse
I am also stuck after trying several suggestions of fixes..
The Sammobile firmware for NEE (Nordic) gives a CSC of BTU, i previously had H3G
Looks like we will have to wait till DEV's get time to build a work-around.
Doing web searches there are several dodgy sites that claim older changers work on the S4 & also giving instructions to install via the old way with the 3 files, instead of just the PDA.
Hikari0307 said:
Hi everyone,
this maybe a very noob question but how do you change the CSC on the S4?
I recently flashed an unbranded UK firmware onto my Australian S4, back with my old phone, I was able to change the CSC with *#272*IMEI# though that doesn't seem to work now. So any ideas? Any help would be greatly appreciated. I want to change the CSC to a UK CSC so I'll be able to receive updates OTA or through kies.
Click to expand...
Click to collapse
Try this to change CSC:
http://droidviews.com/2012/how-to-change-csc-in-samsung-galaxy-phones/
Very well written article, so thank you for the link. Sadly though, one of the methods worked for me. Any more ideas gratefully received though!
++
VogonP0et said:
Very well written article, so thank you for the link. Sadly though, one of the methods worked for me. Any more ideas gratefully received though!
Click to expand...
Click to collapse
i just reboted in stock android recovery (hold vol up + home button+ power),and it said "applied multi csc....and it changed the csc to the my curent firmware¨s csc
I am trying to set my csc to BTU. Im using csc changer app.
However everytime I run it, I dont get a screen allowing me to choose the csc as they show in guides.
I know the app works, since its changed my csc from EVR to DBT (since my rom is german based).
What am I doing wrong?
After playing around with several stock firmwares and Odin, I accidentally stumbled upon a method to change the CSC of my S4 I9505 without the need to root the device. I successfully changed from the original TGY (Hong Kong) to SIN (Singapore) and then to DBT (Germany). This is what I did (in summary)
Make sure you take a backup via Kies if you need personal files
Download the respective stock ROMS from sammobile.com or samsung-updates.com or see thread on Stock Roms on XDA
Extract zip to get tar.md5
Put device into download mode (Vol down+ Home + Power) and Flash using Odin (PDA option)
Wait till device reboots back into Android after completing the flash and recovery
Once device reboots, do a Factory Reset via Settings > Accounts
Once device reboots after Factory Reset/recovery, enter the google account info and restore settings and then turn off the device
Boot device back into download mode (Vol down+ Home + Power)
Re-flash the same downloaded firmware for a second time via Odin
Once the device reboots after the 2nd flash, your CSC should have changed to the CSC of the ROM you downloaded, and Kies also should show that CSC has changed and it should allow future updates via Kies or OTA
kaushalls said:
After playing around with several stock firmwares and Odin, I accidentally stumbled upon a method to change the CSC of my S4 I9505 without the need to root the device. I successfully changed from the original TGY (Hong Kong) to SIN (Singapore) and then to DBT (Germany). This is what I did (in summary)
Make sure you take a backup via Kies if you need personal files
Download the respective stock ROMS from sammobile.com or samsung-updates.com or see thread on Stock Roms on XDA
Extract zip to get tar.md5
Put device into download mode (Vol down+ Home + Power) and Flash using Odin (PDA option)
Wait till device reboots back into Android after completing the flash and recovery
Once device reboots, do a Factory Reset via Settings > Accounts
Once device reboots after Factory Reset/recovery, enter the google account info and restore settings and then turn off the device
Boot device back into download mode (Vol down+ Home + Power)
Re-flash the same downloaded firmware for a second time via Odin
Once the device reboots after the 2nd flash, your CSC should have changed to the CSC of the ROM you downloaded, and Kies also should show that CSC has changed and it should allow future updates via Kies or OTA
Click to expand...
Click to collapse
It's unnecessary to do steps 7-10. You may check your new CSC in recovery mode after restoring the device.
Drunk1105 said:
It's unnecessary to do steps 7-10.
Click to expand...
Click to collapse
I was thinking so too but that's exactly what helped me to change CSC on my i9295 (very common with i9505). After the first wipe I still had the old CSC (I checked in Kies though). After the full procedure I have proper CSC in Kies. Probably there is a easier way but this one works also.
gtp said:
I was thinking so too but that's exactly what helped me to change CSC on my i9295 (very common with i9505). After the first wipe I still had the old CSC (I checked in Kies though). After the full procedure I have proper CSC in Kies. Probably there is a easier way but this one works also.
Click to expand...
Click to collapse
You had to restart Kies, it would show the new CSC then.
Drunk1105 said:
You had to restart Kies, it would show the new CSC then.
Click to expand...
Click to collapse
Of course I restarted Kies. I think what I have not done is entering Recovery once the Odin flash is done. Entering Recovery gives the following: Applying Multi-CSC... Applied the CSC-code: XXX (my new CSC here). And I think here's where all the magic happens.
gtp said:
Of course I restarted Kies. I think what I have not done is entering Recovery once the Odin flash is done. Entering Recovery gives the following: Applying Multi-CSC... Applied the CSC-code: XXX (my new CSC here). And I think here's where all the magic happens.
Click to expand...
Click to collapse
At least for me, my device goes in to "Recover Booting" after each Odin flash as well as a factory reset. I actually tried a a manual recovery boot via Vol Up + Home + Power after the factory reset in step 6, but it did not change my CSC, hence doing all steps is what worked for me all the time. I once skipped the Google login part after the factory reset and it didn't work that time either and had to do another factory reset, google login and another re-flash.
I wish there is an easier way, the reason I have been experimenting with different firmwares is to see if I can get LTE working natively, since phone does not show the LTE option under Mobile Networks. We have 2 operators offering LTE here in Sri Lanka but Samsung only sells the I9500 officially here which does not have LTE, so got down my I9505 from HK. So far I have had to use Viaero 4G Toggle app from the play store to enable LTE, while it works, enabling LTE this way is a huge battery drainer!
but is there a way to extract CSC from a particular firmware and flash only this?
I used to do it on my S3 by using the hidden.img and the cache.img but if I try in Odin on the S4 it fails (
it is possible to downgrade the firmware from MGA (CSC I9505ITVBMH1) in MDF (CSC I9505ITVAMD8) with odin?
If you simply reflash your desired firmware using odin...I think it won't be an issue....but sometimes the phone gets stuck on the bootloop....then you need to boot to recovery mode and wipe data and cache...then everything will be ok...as long as you flash the correct firmware for the correct phone you'll be fine
DexterJack said:
it is possible to downgrade the firmware from MGA (CSC I9505ITVBMH1) in MDF (CSC I9505ITVAMD8) with odin?
Click to expand...
Click to collapse
Look here for the Odin flashable CSC file http://forum.xda-developers.com/showthread.php?t=2250824, or first select ITV with CSC Changer from Play (need root).
Hi all
So tomorrow I'm taking my S4 in for assessment and replacement, the issue is I've got a INU ROM and my countries CSC is XFA, for the life of me I cannot find a fast 4.3 MJ8 XFA ROM download (Terafile is useless and the other mirror is to) so I've reverted to INU MJ8 which I had on my PC, all I need now is to change the CSC so that it appears as a XFA phone again when I get to Samsungs repair center.
Is there anyway I can download the XFA CSC? I've got both CSC Select and CSC Changer installed. Select only gives me Asian CSCs, and a changer seems to be useless now can anyone help? I just need the XFA CSC and a way to install it.
POLO_i780 said:
Hi all
So tomorrow I'm taking my S4 in for assessment and replacement, the issue is I've got a INU ROM and my countries CSC is XFA, for the life of me I cannot find a fast 4.3 MJ8 XFA ROM download (Terafile is useless and the other mirror is to) so I've reverted to INU MJ8 which I had on my PC, all I need now is to change the CSC so that it appears as a XFA phone again when I get to Samsungs repair center.
Is there anyway I can download the XFA CSC? I've got both CSC Select and CSC Changer installed. Select only gives me Asian CSCs, and a changer seems to be useless now can anyone help? I just need the XFA CSC and a way to install it.
Click to expand...
Click to collapse
Conect it to Kies 3 and tell me what appears close CSC btw (). The 3 letters is what we need
It says INU, can anyone please either show me how to extract a CSC from a ROM or link me to a XFA CSC Package that I can flash through Odin?
POLO_i780 said:
It says INU, can anyone please either show me how to extract a CSC from a ROM or link me to a XFA CSC Package that I can flash through Odin?
Click to expand...
Click to collapse
If you want to change yoyr CSC, please use Samsung Galaxy S2/S3 CSC Changer (PlayStore) After using this app you MUST reboot again into STOCK RECOVERY(manually POWER+VOLUP) for the changes to take place.You will see message "CSC xxx applied.." and then you can reboot to Android .f still doesnt work try this have a nice day.
1.Make sure you take a backup via Kies
2.Download the respective stock ROMS from sammobile.com or samsung-updates.com
3.Extract zip to get tar.md5
4.Put device into download mode (Power+ Volume down) and Flash using Odin (PDA option)
5.Wait till device reboots back into Android after completing the flash and recovery
6.Once device reboots, do a Factory Reset via Settings > Accounts
7.Once device reboots after Factory Reset/recovery, enter the google account info and restore settings and then turn off the device
8.Boot device back into download mode (Power+Vol down)
9.Re-flash the same downloaded firmware for a second time via Odin
10.Once the device reboots after the 2nd flash, your CSC should have changed to the CSC of the ROM you downloaded, and Kies also should show that CSC has changed and it should allow future updates via Kies or OTA
POLO_i780 said:
Hi all
So tomorrow I'm taking my S4 in for assessment and replacement, the issue is I've got a INU ROM and my countries CSC is XFA, for the life of me I cannot find a fast 4.3 MJ8 XFA ROM download (Terafile is useless and the other mirror is to) so I've reverted to INU MJ8 which I had on my PC, all I need now is to change the CSC so that it appears as a XFA phone again when I get to Samsungs repair center.
Is there anyway I can download the XFA CSC? I've got both CSC Select and CSC Changer installed. Select only gives me Asian CSCs, and a changer seems to be useless now can anyone help? I just need the XFA CSC and a way to install it.
Click to expand...
Click to collapse
I found one firmware for ya: HERE
Repulsa said:
If you want to change yoyr CSC, please use Samsung Galaxy S2/S3 CSC Changer (PlayStore) After using this app you MUST reboot again into STOCK RECOVERY
(manually POWER+VOLUP) for the changes to take place.
You will see message "CSC xxx applied.." and then you can reboot to Android
Click to expand...
Click to collapse
Hi there.
I'm not sure if you read my 1st post, the issue here is that I've got both CSC Changer and CSC Select installed. Changer does nothing when I click Change CSC, and CSC Select doesn't have the CSC I want, which is XFA, I am already Rooted BTW. So I want a XFA CSC package so I can flash it via Odin.
POLO_i780 said:
Hi there.
I'm not sure if you read my 1st post, the issue here is that I've got both CSC Changer and CSC Select installed. Changer does nothing when I click Change CSC, and CSC Select doesn't have the CSC I want, which is XFA, I am already Rooted BTW. So I want a XFA CSC package so I can flash it via Odin.
Click to expand...
Click to collapse
Oh yea ived been reading all right. Maybe it doesnt change because your recovery is not even stock? you need to give us more information about your phone in order to solve your problem ie: Stock/Custom Etc....and if you really wanna extract the CSC. Here's what you need to do. have a nice day.
1.Download the appropriate firmware for your region from sammobile.
2.Extract Hidden.img and cache.img
3.Now compress these two files together into a .Tar file.
4.Flash this in PDA/CSC section of Odin
5.Done!
Edit: If this solution doesnt help you @Joku1981 will be happy to help you
Thanks so much for the help guys!
Joku1981
Thanks mate, I'm having issues with TeraFile
Repulsa said:
Oh yea ived been reading all right. Maybe it doesnt change because your recovery is not even stock? you need to give us more information about your phone in order to solve your problem ie: Stock/Custom Etc....and if you really wanna extract the CSC. Here's what you need to do. have a nice day.
1.Download the appropriate firmware for your region from sammobile.
2.Extract Hidden.img and cache.img
3.Now compress these two files together into a .Tar file.
4.Flash this in PDA/CSC section of Odin
5.Done!
Edit: If this solution doesnt help you @Joku1981 will be happy to help you
Click to expand...
Click to collapse
Thanks a mill! This is what I needed!
How to flash the firmware (5 files in archive) to your s7edge?
AP, CP & BL I understand, but the 2 CSC-files...?
CSC -> there's a PIT inside and will wipe your device
HOME_CSC -> the data should stay on your device
Today I tried to update with HOME_CSC, everything was OK, but at the end Odin 3.10.7 FROZE at "meta-data" (this folder is in the HOME_CSC file): nothing happened anymore and I had to pull the cable
Smart Switch didn't recognize my S7edge anymore for the "Emergency Firmware Repair"!
Luckely, Odin did recognize my device and could install the firmware with the "normal" CSC-file and afterwards my device was reset...
I hope someone has a solution on this, because I don't want to install everytime again and again...
+1
same happened to me. I have the same question...
cristy78 said:
+1
same happened to me. I have the same question...
Click to expand...
Click to collapse
How did you get your device working again?
henklbr said:
How did you get your device working again?
Click to expand...
Click to collapse
Well, the flash went just fine. No problems except the device reset at factory settings. As brand new one....
But of course I would like to know how to flash without resetting the device.
I had the same problem yesterday when used Home_CSC... flashed again with normal CSC and went back to normal with a formated user data
We really need a solution to that... What would happen if we skipped the CSC file when flashing thru ODIN?
Flashing with CSC and not home_CSC will also reset your CSC.
Eg: I was on VODAFONE Romania and flashed stock unbranded using CSC. The result was I lost my ROM (from Romania) CSC, and defaulted to XEO from the multi CSC.
In this situation you cannot go back to your original CSC even after flashing using Smart Switch.
Rooting is the only option then and that will trip Knox.
Sent from my SM-G935F using Tapatalk
anybody figured this out?
Just had the same problem flashing with HOME_CSC it got stuck in ODIN and had to pull the cable.
Had to turn off phone and boot again in download mode to flash again with a straight CSC.
insaned said:
Just had the same problem flashing with HOME_CSC it got stuck in ODIN and had to pull the cable.
Had to turn off phone and boot again in download mode to flash again with a straight CSC.
Click to expand...
Click to collapse
Have a look at this thread:
OFFICIAL STOCK Firmware-update (Odin) thread Samsung GALAXY S7Edge SM-G935F
henklbr said:
Have a look at this thread:
OFFICIAL STOCK Firmware-update (Odin) thread Samsung GALAXY S7Edge SM-G935F
Click to expand...
Click to collapse
Thanks for the heads up. good job
What is the benefit of flashing Home_CSC instead of just CSC?
BCSC said:
What is the benefit of flashing Home_CSC instead of just CSC?
Click to expand...
Click to collapse
+1 for that question...
If some can clear us out whats inside of both files and diffrences it would be great ...
V_B said:
+1 for that question...
If some can clear us out whats inside of both files and diffrences it would be great ...
Click to expand...
Click to collapse
CSC contains an instruction that allow Odin to wipe the DATA
Code:
--update_package=CACHE:recovery/sec_csc.zip
--carry_out=csc_factory
--wipe_data
HOME_CSC contains instruction only to allow wipe of cache BUT the original HOME_CSC can cause Odin to freeze at the end of the flashing process.
Code:
--update_package=CACHE:recovery/sec_csc.zip
--carry_out=csc_home
--wipe_cache
That's why you need to modify the HOME_CSC using the CYGWIN tool.
Just dont flash the home csc. I never did it. Everything work greats.
mercifool said:
Just dont flash the home csc. I never did it. Everything work greats.
Click to expand...
Click to collapse
HOME_CSC is supported on Odin version 3.11 or later. It's okay to flash it now.
Sorry to revive this thread but when a downgrade is done from Nougat back to Marshmallow a factory reset via recovery must be required if flashing HOME_CSC. Otherwise just use normal CSC on downgrade.
thank you
Samsung S6 Active G890A
Hello,
Where do I find a HOME_CSC file for Samsung S6 Active SM-G890A device?
Hello guys, I think I've done everything correctly so far. I downloaded the firmware from samfirm tool and decrypted and extracted it. Which CSC file to I add to odin the CSC_BTU or the HOME_CSC_BTU ?
http://imgur.com/JP6f6wx
Csc_btu
CSC_BTU wipe phone (reset phone to factory)
HOME_CSC_BTU keep your recent data intact
harfot said:
CSC_BTU wipe phone (reset phone to factory)
HOME_CSC_BTU keep your recent data intact
Click to expand...
Click to collapse
HOME_CSC_BTU is to be used if your phone has already the BTU CSC!