I have a solution of error7 and flashing roms error. - Lenovo A6000/Plus Questions & Answers

this is my own method
1st of all do full wiped and format data,system,internal etc.Then flash rom(asus UI) ,it get error so again full wiped and format data,system,internal etc. Then reboot into recovery.Then format Wipe cache only and flashed the rom(asus ui).
Its work for me....:good:

Related

[q] [need help!!!]

I had a really hard time installing custom recovery... I finally thought I had it and
wiped data/factory reset
format data
format system
wiped cache partition
but I did not flash a ROM
when I tried to get back in the custom recovery it just keeps going back to the factory recovery.... so i am stuck...
what to do please help...
horatiob said:
I had a really hard time installing custom recovery... I finally thought I had it and
wiped data/factory reset
format data
format system
wiped cache partition
but I did not flash a ROM
when I tried to get back in the custom recovery it just keeps going back to the factory recovery.... so i am stuck...
what to do please help...
Click to expand...
Click to collapse
My suggestion is that your read through the forums here as there are several "beginner guides" that will get you started.
After you installed your first custom rom the process proves itself to be easy:
- Flash a stock ROM (2.2 nordic)
- Acquire root using SuperOneClick
- Instal Clockworkmod recovery/2ndInit (I prefer 2ndInit)
- Transfer the nandroid backup (.zip file) to the root of your SD card
- Reboot phone when led turns blue hit volume down
-Wipe data
-Wipe cache
-Wipe Dalvik (It's under advanced)
-Restore -> select update zip from sdcard
- Browse to the nandroid backup file you put on your sdcard in step 4
Done

[Q] Reincarnation not booting

I am using GT S5360. I have installed reincarnation pre final and it didn't passed the screen where samsung galaxy Y GTs5360 comes.
I followed the whole procedure but not working. Any help ???
Did you flash kernel?
Mount system?
Remember that naturalizer or touchwiz rom isn't for galaxy y
after you flash percys cm#2 kernel you must reboot to recovery and wipe system data and cache before you flash the rom
the steps are as follows
go into cwm
mount system
flash percys #2 kernel
reboot to recovery
format system data cache
mount system data cache
flash rom zip
format data
restart
if the rom still doesnt boot after that take out your sim card
if the rom now boots you need to change your baseband by flashing a different stock rom firmware via odin
I flashed the jellybean version... I have restored the backup now and i followed all the steps... I flashed the zip file of kernel, rebooted recovery, formatted system, data, cache and then installed the rom... But it stucks on bootscreen... Dosen't even show the bootanimation...
Honey_singh said:
I flashed the jellybean version... I have restored the backup now and i followed all the steps... I flashed the zip file of kernel, rebooted recovery, formatted system, data, cache and then installed the rom... But it stucks on bootscreen... Dosen't even show the bootanimation...
Click to expand...
Click to collapse
Do this :
1.Go to CWM,mount all the partitions and flash the kernel.
2.Reboot the system and take out the battery and then put it again
3.Again boot into cwm and format system,data and cache
4.Go back and wipe data and cache
5.Again go to mounts and storage and mount all the partitions
6.Flash the rom and after that wipe data
7.Reboot
And burrrrrah!
Your new rom is ready!
Honey_singh said:
I flashed the jellybean version... I have restored the backup now and i followed all the steps... I flashed the zip file of kernel, rebooted recovery, formatted system, data, cache and then installed the rom... But it stucks on bootscreen... Dosen't even show the bootanimation...
Click to expand...
Click to collapse
go back into cwm and format data and restart
did you mount system data and cache before flashing the zip?
have you tried it without the sim card inserted?
aniket.lamba said:
Do this :
1.Go to CWM,mount all the partitions and flash the kernel.
2.Reboot the system and take out the battery and then put it again
3.Again boot into cwm and format system,data and cache
4.Go back and wipe data and cache
5.Again go to mounts and storage and mount all the partitions
6.Flash the rom and after that wipe data
7.Reboot
And burrrrrah!
Your new rom is ready!
Click to expand...
Click to collapse
Nthing happened
Still it stops at galaxy y gts5360 screen
marcussmith2626 said:
go back into cwm and format data and restart
did you mount system data and cache before flashing the zip?
have you tried it without the sim card inserted?
Click to expand...
Click to collapse
Yes, I mount the system and cache
Honey_singh said:
Nthing happened
Still it stops at galaxy y gts5360 screen
Yes, I mount the system and cache
Click to expand...
Click to collapse
have you removed the sim card and see if it booted - please do all the steps I mentioned

[SOLVED] Rooted Nexus 4 All F2FS Stuck at Boot Animation After Flashing Custom ROM

Hi guys! I need a bit of help. I was using PA 4.42 with FK r209 on my N4 with all F2FS (/system, /data, /cache). Yesterday I flashed Nexus_5_Experience_cm11_Nexus4_Release8.5 which claimed in its features that it has F2FS support. so I made a Nandroid backup with TWRP, wiped system, data, cache, dalvik cache and flashed the ROM. Installer did the job apparently fine and showed installation as successful. I then rebooted but ROM could not make it. It was stuck on decryption password screen and did not go past even by giving the password. Then I got back to TWRP Recovery mode and tried to restore my Nandroid backup but it was also stuck at PA boot animation prior to decryption password screen. Then I again went back to Recovey, wiped system, cache, data and dalvik cache again and then restored the Nandroid backup again but it stuck at PA boot animation again.
Is there any way I can restore my backup or would I need to fastboot flash a factory image to make the phone alive again? If so, would it be ok to flash factory image while having all partitions converted to F2FS? Will it do the job or add up in the issue?
Any suggestions would be appreciated please.
EDIT:
ISSUE SOLVED BY FASTBOOT FLASHING 4.4.4 FACTORY IMAGE WHICH HAD NO CLASH WITH F2FS PARTITIONS AND RE-WROTE ALL PARTITIONS TO EXT4 FORMAT.

Random names TWRP

Hi, I'm from Nougat 4.5.14 and these are the steps I made:
1. Flash codeworx then reboot to twrp
2. Wipe cache and dalvik
3. Install OS 5.0.2
4. Install magisk
5. Wipe cache dalvik
6. Reboot to system
However after rebooting to system it started bootlooping so I decided to reflash OS and wipe data as recommended. So I power off the phone then hold volume down + power to boot to recovery. However when I boot to recovery, file folders started to become random names like its encrypted. Luckily I backed up my internal storage and data so I'm okay to flash everything but can someone help me how to fix the twrp random file names and the steps for reflashing the OS?
EDIT: I rebooted to recovery, wiped dalvik, cache, and data. flashed OS 5.0.2, wipe dalvik cache, flashed magisk, wipe dalvik, reboot to system and it does not proceed to circling dots. So what I did is just, wipe dalvik, cache, data, flashed OS, wipe again dalvik cache, boot to system and it proceeds to circling dots however it takes so long that I can consider this as bootloop. I'm very tempted to wipe everything (data, system, internal storage, cache, dalvik) then just flash again the OS but I don't know if it would work so I hope someone could give me some steps how to fix this
Edit 2: This is solved now: What I did is just after trying the flash OS with no magisk, I booted to system. However, i just dont boot at all so I decided to boot to recovery again, but this time the recovery is the stock one. I wipe everything I could including cache, system reset, and data (music pics etc) and it booted to the system in no time but everythings lost.
You have to format data... Not just wipe it. From TWRP go to format data, write yes, and let it format everything. Then transfer over to the phone all the fil a you need (ROM, kernel, no verity zip) and flash them as per the instructions of your rom thread. You should be fine.
panooos said:
You have to format data... Not just wipe it. From TWRP go to format data, write yes, and let it format everything. Then transfer over to the phone all the fil a you need (ROM, kernel, no verity zip) and flash them as per the instructions of your rom thread. You should be fine.
Click to expand...
Click to collapse
What I did is just after trying the flash OS with no magisk, I booted to system. However, i just dont boot at all so I decided to boot to recovery again, but this time the recovery is the stock one. I wipe everything I could including cache, system reset, and data (music pics etc) and it booted to the system in no time but everythings lost.
Edit: nvm you've solved it
Peshyy said:
Edit: nvm you've solved it
Click to expand...
Click to collapse
You can still show other solutions as others may need it sometime

I forgot to wipe the dalvik in twrp and proceeded to install a custom rom

it failed when I tried to wipe the dalvik in twrp and then I proceeded to install a custom rom now the rom is not being installed and I cant quit twrp becuase my power button is not working somebody help
you have other issue than dalvik. format userdata partition.

Categories

Resources