need help with SM-G900I - Galaxy S 5 Q&A, Help & Troubleshooting

Hello All,
Need some direction please.
I have a Galaxy S5 SM-G900I
Its rooted and confirmed but when i tried to install The Galaxy Project for Samsung Galaxy S5 G900F/FQ/I/M/P/T/W8 the following happens.
I Restart phone into Recovery Mode and Do a FULL Wipe after that a menu appears and i choose install from sd when its done the same menu appears and if i do a reboot device after reboot it goes back to a fresh factory install of 5.0 Lollipop.
Also i have tried a number of different roms and also different root, But to no avail.
The same happens
Any help would be much appreciated
Many Thanks

which Bootloader and Modem you running - i have the same phone and im a flashaholic
DL the BL and modem for MM and install Insanity rom V3 live ( really an S7 rom )
Give that a try
It sounds like you may be using the wrong BL/Modem for your version of software

Will do.
Many Many thanks

Downloaded Latest BOOTLOADER/MODEM Packages
http://forum.xda-developers.com/showpost.php?p=52210611
And also
http://forum.xda-developers.com/galaxy-s5/development/insanity-s7-edge-port-devices-mm-bl-t3344821
Instructions to install
1) Put the zip file in your SD Card
2) Reboot in Recovery Mode (Twrp )
3) Wipe Data, Cache, Dalvik Cache and System
4) Install the ROM
5) Reboot.​
6) Profit.​
Followed the above instructions but after Data wipe and cache, Dalvic cache and system was no where to be found,
Installed from sd card and as soon as it started i got the following errors
E:footer is wrong
E:signature verification failed
did a reboot and same result as before.
This is driving me nuts.
Many Thanks

Current details are
SM-G900I
Android version 5.0
Baseband version G900IDDUIBOAI
Build No. LRX2IT.G900IDVUIBOJI
Many Thanks

Would sincerely appreciate any input on this matter.
Many Thanks

Which version of TWRP are you running?
3.0.0.0 works spot on for me, and I've only used it once, but 3.0.2.0 seems OK too, newer versions have problems mounting partitions / External SD
AFAIK, Bootloaders can not be flashed from recovery, you need to flash that with ODIN, probably the modem too, then boot into TWRP and flash the ROM

krappo said:
Would sincerely appreciate any input on this matter.
Many Thanks
Click to expand...
Click to collapse
I use philz recovery ..I find the other one too complicated and easy to go wrong... Use philz and there is a choice for wipe for new ROM... Honestly simple is best.. Used it for years not one issue... Tried the other recovery program and nearly bricked my phone ...
Sent from my SM-G935F using XDA-Developers mobile app

beargeo said:
I use philz recovery ..I find the other one too complicated and easy to go wrong... Use philz and there is a choice for wipe for new ROM... Honestly simple is best.. Used it for years not one issue... Tried the other recovery program and nearly bricked my phone ...
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
What a shame as i have already installed and used TWRP 3.0.0.0.
And after following instructions and installed Insanity S7 Edge v3 LIVE, upon reboot all was going well and at the end of the progress bar it came to a halt @ starting apps.
It now goes to Samsung splash screen to Insanity rom is installing (starting apps).
Its switching between these two every few seconds.
The phone is otherwise is non responsive,
I dont know hot to stop/fix this.
Again many thanks

Managed to get philz recovery on and working but still stuck on that loop
many thanks

Some how managed to revert back to Andriod ver 5.0
What a relief : )
many thanks for all the help

Wonder if the downloaded ROM is corrupt... Try a different ROM... Try the new Nova ROM.. Download that and stock it on your mem card and install ... Don't forget to do full wipe ...
Sent from my SM-G935F using XDA-Developers mobile app

beargeo said:
Wonder if the downloaded ROM is corrupt... Try a different ROM... Try the new Nova ROM.. Download that and stock it on your mem card and install ... Don't forget to do full wipe ...
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Ok will give that a try tommorow
:good::good::good::good:

krappo said:
Ok will give that a try tommorow
:good::good::good::good:
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Since my first post I'm on my third ROM... on thunder bolt now.. Was on insanity, then Nova ROM.. Just to prove I flash mine like crazy and Phil is the easiest.... ... Good luck but I promise you, you won't stop with 5 .. You got the taste now ... [emoji106]
Sent from my SM-N920C using XDA-Developers mobile app

beargeo said:
View attachment 3752403
Since my first post I'm on my third ROM... on thunder bolt now.. Was on insanity, then Nova ROM.. Just to prove I flash mine like crazy and Phil is the easiest.... ... Good luck but I promise you, you won't stop with 5 .. You got the taste now ... [emoji106]
Sent from my SM-N920C using XDA-Developers mobile app
Click to expand...
Click to collapse
Looking @ the Nova rom page now.
http://forum.xda-developers.com/galaxy-s5/development/rom-novarom-v1-0-t3175286
Which one do i download as i am G900I.
I like to start fresh this time so if u could direct me to links for Latest BOOTLOADER/MODEM for my phone it would be greatly appreciated.
Many Thanks in Advance

Ive deleted the BL and modem from my COmputer as didnt intend to go back to 5 - Youtube it buddy - generally the links are in there
Not much difference between G900i and G900f - i find f works on i fine
I reverted back to Norma rom as V2 is coming out lol

I am giving up for now as nothing will work on my phone and i have gone back to stock.
many Thanks for all your help

I gave it one more try.........
First rooted with
CF-Auto-Root-klte-kltedv-smg900i
Then loaded
twrp-3.0.2-1-klte.img.tar
And finally
PopWiz_Telstra_v5.1_FINAL_G928FUVU2DOH6_G928FTMB2DOH6_TMB.zip
Worked a treat.
Many Thanks

Related

Help. Bricked galaxy y pro

My friend tried to flash back his stock ROM using Odin on his galaxy y pro duos. During the process it showed him some error and he pulled his phone out. Now it just shows a white screen and keeps restarting. It doesnt enter download mode or even stock recovery. Help please
Sent from my MB526 using xda app-developers app
kadavil said:
My friend tried to flash back his stock ROM using Odin on his galaxy y pro duos. During the process it showed him some error and he pulled his phone out. Now it just shows a white screen and keeps restarting. It doesnt enter download mode or even stock recovery. Help please
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
Well you should have posted in bricked your phone.. post here thtead.. you would have got help faster.. but for yoir problem.. either usb jig.. or samsung care.. dont tell them u did all this.. just tell update via kies this happened..
hit thanks button! If above post helps you..
Sent from my GT-S6102
Over at the defy section bricked problems are in Q and A section thats why
Anyway I've informed him about the USB jig. Thanks
Sent from my MB526 using xda app-developers app
kadavil said:
Over at the defy section bricked problems are in Q and A section thats why
Anyway I've informed him about the USB jig. Thanks
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1600373
Sorry i didnt see your MB526 sign... so now provided thread link
hit thanks button! If above post helps you..
Sent from my GT-S6102
CWM recovery not working in galaxy y pro duos b5512
I haven't bricked my phone but the CWM recovery mode refuses to install .zip from the sdcard. it says cant mount sdcard. Actually i installed the compact kernel 1.3 from here http://forum.xda-developers.com/showthread.php?t=1913349. It has some glitches and so i wanna revert to 1.25. But i m just stuck here. The CWM recovery cant even wipe the data. It just shows errors upon errors.
Someone please tell me a way to revert to the stock recovery mode.
I have also tried ODIN 1.85 for flashing it with the stock rom i downloaded from samsung updates. i have the phone drivers too. but it doesnt help either.. here is the screenshot of the odin error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i tried getting the stock kernel from that same thread but the link is non responsive
Please help.
arnabdc91 said:
I haven't bricked my phone but the CWM recovery mode refuses to install .zip from the sdcard. it says cant mount sdcard. Actually i installed the compact kernel 1.3 from here http://forum.xda-developers.com/showthread.php?t=1913349. It has some glitches and so i wanna revert to 1.25. But i m just stuck here. The CWM recovery cant even wipe the data. It just shows errors upon errors.
Someone please tell me a way to revert to the stock recovery mode.
I have also tried ODIN 1.85 for flashing it with the stock rom i downloaded from samsung updates. i have the phone drivers too. but it doesnt help either.. here is the screenshot of the odin error
i tried getting the stock kernel from that same thread but the link is non responsive
Please help.
Click to expand...
Click to collapse
Try to close Kies process and flash a firmware with separated parts (PDA, MODEM, CSC etc).
eduds said:
Try to close Kies process and flash a firmware with separated parts (PDA, MODEM, CSC etc).
Click to expand...
Click to collapse
If you could please give a link to such a firmware. Coz i am looking for it for the past 2 days and havent found one. The ones i found are either blocked or misleading.
Thank you for your help
arnabdc91 said:
If you could please give a link to such a firmware. Coz i am looking for it for the past 2 days and havent found one. The ones i found are either blocked or misleading.
Thank you for your help
Click to expand...
Click to collapse
Did you try sammobile.com?
If yes, I think exist a tool called SplitFus which transform one package firmware into separated files.
eduds said:
Did you try sammobile.com?
If yes, I think exist a tool called SplitFus which transform one package firmware into separated files.
Click to expand...
Click to collapse
Yup i did just the same last night. It solved my problem. There is a thing called cygnus terminal which can run splitfus2 (splitfus2 is actua;;y a linux based software so cygnus helps it run on windows). It splits the .tar.md5 into three parts which can be used to flash thru ODIN. Heres the link to the tutorial. http://forum.xda-developers.com/showthread.php?p=25130011. It contains a tutorial video too which shows exactly how to do it.
U can download stock roms from either samsung-updates.com or sammobile.com
Thanx:good:
PS: while downloading cygnus DONT download the 64-bit version coz it doesnt have support for md5. go for the 32-bit one.
arnabdc91 said:
Yup i did just the same last night. It solved my problem. There is a thing called cygnus terminal which can run splitfus2 (splitfus2 is actua;;y a linux based software so cygnus helps it run on windows). It splits the .tar.md5 into three parts which can be used to flash thru ODIN. Heres the link to the tutorial. http://forum.xda-developers.com/showthread.php?p=25130011. It contains a tutorial video too which shows exactly how to do it.
U can download stock roms from either samsung-updates.com or sammobile.com
Thanx:good:
PS: while downloading cygnus DONT download the 64-bit version coz it doesnt have support for md5. go for the 32-bit one.
Click to expand...
Click to collapse
Hello Arnab, Recently I am facing the same problem, My Phone is working fine but I am unable to flash anything with cwm recovery. I had installed hathyon ROM 1.1 and Compact kernel 1.3.
Is this due to Compact kernel 1.3.??
Which kernel are u using now? (I guess 1.25 should be fine.)
shikhar623 said:
Hello Arnab, Recently I am facing the same problem, My Phone is working fine but I am unable to flash anything with cwm recovery. I had installed hathyon ROM 1.1 and Compact kernel 1.3.
Is this due to Compact kernel 1.3.??
Which kernel are u using now? (I guess 1.25 should be fine.)
Click to expand...
Click to collapse
ya, i believe its because 1.3.. try to flash older kernel.

[Q] Data Connection in CM7

I have installed almost all available CM7 variants for our phone. But one thing is annoying me. I can't connect to mobile data. I used all available kernels for CM7 and also stock. I also followed the installation procedure step by step.But still no luck. Mobile network says, "connecting" then goes disconnected after a few seconds and it happens all the time. Can someone give answers to me?
This is my very first post. So please forgive me if anything is wrong.
Try flashing back to stock rom.....is network data working on stock????
I am also using cm7 based rom havn't faced anything yet!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
adriansticoid said:
I have installed almost all available CM7 variants for our phone. But one thing is annoying me. I can't connect to mobile data. I used all available kernels for CM7 and also stock. I also followed the installation procedure step by step.But still no luck. Mobile network says, "connecting" then goes disconnected after a few seconds and it happens all the time. Can someone give answers to me?
This is my very first post. So please forgive me if anything is wrong.
Click to expand...
Click to collapse
CyanogenMod 7 for Galaxy Y is in RC release however there is still bugs like that which is only encountered on your device. You should flash to Stock ROM using Odin since Data connection using CM7 is causing problems on you.
And welcome to XDA! .
jpdesuasido said:
CyanogenMod 7 for Galaxy Y is in RC release however there is still bugs like that which is only encountered on your device. You should flash to Stock ROM using Odin since Data connection using CM7 is causing problems on you.
And welcome to XDA! .
Click to expand...
Click to collapse
That's sad. Device specific problem eh. I'll try flashing back to stock when I have the chance. I don't have a PC.
Trupal Patel said:
Try flashing back to stock rom.....is network data working on stock????
I am also using cm7 based rom havn't faced anything yet!
Click to expand...
Click to collapse
Yes. Data is working on both stock and miniROM for me. The only thing I can do now is to restore a CWM backup of stock because I don't have PC.
Ok get a chance n Try falshing back to stock rom via odin and then try again to flsah CM7....
It may work...
adriansticoid said:
Yes. Data is working on both stock and miniROM for me. The only thing I can do now is to restore a CWM backup of stock because I don't have PC.
Click to expand...
Click to collapse
You can use the tool made by @.rio of xda developers! A Odin for Galaxy Y that doesn't need to use PC. You can find it in the Android Development forum in Galaxy Y.
1209
jpdesuasido said:
You can use the tool made by @.rio of xda developers! A Odin for Galaxy Y that doesn't need to use PC. You can find it in the Android Development forum in Galaxy Y.
Click to expand...
Click to collapse
Yes I know that. But he says, param.lfs is not working. What does that mean? I have already modified the param.lfs in my phone because I installed a custom boot logo.
Trupal Patel said:
Ok get a chance n Try falshing back to stock rom via odin and then try again to flsah CM7....
It may work...
Click to expand...
Click to collapse
Hey man. I flashed back to stock using rio's tool. Still no luck. I installed CM7 Reincarnation S5 edition. But my problem still persists. Mobile network state says, connecting. Then says disconnected afterwards. I don't know what to do anymore.
adriansticoid said:
Hey man. I flashed back to stock using rio's tool. Still no luck. I installed CM7 Reincarnation S5 edition. But my problem still persists. Mobile network state says, connecting. Then says disconnected afterwards. I don't know what to do anymore.
Click to expand...
Click to collapse
Go to a computer shop and Odin it. Or go back to stock ROM again using rio's tool. I think it's a problem of CM7. :highfive:
jpdesuasido said:
Go to a computer shop and Odin it. Or go back to stock ROM again using rio's tool. I think it's a problem of CM7. :highfive:
Click to expand...
Click to collapse
I just reverted back to stock now using Odin. Guess what? Mobile data still not working.

Any ROMs out there for a unlocked bootloader rather then SafeStrap?

Is there anything out there that will work flashed with a real recovery rather then just SafeStrap?
With the recent bootloader unlock, I'm curious whats currently available? and what might actually work, will anything we currently have work?
Or does everything have to be customized to work now that we have a true bootloader unlock?
I would like to toast this thread, I should have responded to the post under me, but forgot to check for one.
Jasmine rom 6.1 works perfectly just download and flash the zip in twrp. Don't forget to do a full wipe like in the picture below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N900V using Tapatalk
alexp1289 said:
Jasmine rom 6.1 works perfectly just download and flash the zip in twrp. Don't forget to do a full wipe like in the picture below.
View attachment 3722566
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
I'm just got around to trying Jasmine I've been flashing everything under the sun all night, CM13, Dirty Unicorns, and now Jasmine but
a bunch of other stuff also.
I'm having trouble connecting to my 4G LTE data on all of them including Jasmine,
is there some modem firmware I should be flashing over these ROMs after installation?
A couple ROMs did include firmware flashing instructions but I wasn't sure if that was relevant
if coming from OF1 to a unlocked bootloader and then flashing a custom ROM.
Too be fair though its hard to pick out which instructions are relevant when the bootloader
is unlocked and you have a real recovery, and which doesn't apply to us, since the instructions
usually aren't written with that in mind. =/
I've never seen this before with ROMs on other phones.
Anyone having issues with non-Verizon server providers especially MVNO's like Straight Talk (Verizon)?
Thanks for the info that its working for most people and should be working, I wonder
what my issue with it is then.
I've been trying to enter in a custom Access Point Name on a bunch of the ROMs, unfortunately Jasmine's seems to be greyed
out and I can't add a custom one.
Cellular phone calls are working, but data is not though Dirty Unicorns did have 1X data working but that is the best
I've come up with so far.
I just need to deliver something usable on this phone so my uncle can wait for a CM release that mostly works.
We were worried about a update being shipped out on the stock ROM updating over the bootloader unlock,
so we went ahead and tried some of the custom ROMs everyone has have generally positive results with.
After a long time playing around with it I accidentally formatted my TWRP backup of the stock ROM not paying
enough attention, which I should have backed up to a real hard drive.
I originally came to this trying to get hotspot working since he's on a MVNO the stock Verizon Note 3 ROM
won't hotspot or tether, and he has no other options for a little internet access out in the boonies.
Now I'm in a odd situation having to deliver something that works well enough for him to wait it out for a
CM release.
And don't know if flashing stock will lock the bootloader again or if I should flash it with Odin or if I can flash a stock
image with TWRP and where to get one for that.
I would prefer not to have to do that though.
alexp1289 said:
Jasmine rom 6.1 works perfectly just download and flash the zip in twrp. Don't forget to do a full wipe like in the picture below.
View attachment 3722566
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
In the Jasmine installation instructions should I be following anything related to the developer edition?
FLASH lk_hltevzw-v6.4.zip in recovery after flashing the Jasmine ROM image?
And in our situation should I be flashing the firmware with Odin after the install as per the Developer Edition instructions?
Or just flashing Jasmine and rebooting?
dreyeth said:
In the Jasmine installation instructions should I be following anything related to the developer edition?
FLASH lk_hltevzw-v6.4.zip in recovery after flashing the Jasmine ROM image?
And in our situation should I be flashing the firmware with Odin after the install as per the Developer Edition instructions?
Or just flashing Jasmine and rebooting?
Click to expand...
Click to collapse
No disregard the instructions about the kernel if your bootloader is from the 0F1 firmware update. A custom kernel needing to be flashed was only for developer editions because the bootloader was unable to be upgraded without locking the device. Hence tweaks to the kernel were needed to run the rom with no issues. It doesn't apply to you if you unlocked your 0F1 bootloader.
Sent from my SM-N900V using Tapatalk
alexp1289 said:
Jasmine rom 6.1 works perfectly just download and flash the zip in twrp. Don't forget to do a full wipe like in the picture below.
View attachment 3722566
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Got any ideas for someone who has successfully flashed Jasmine before but then went
and tried a bunch of ROMs to see if they would work but then when I was done
went back to flash Jasmine and now it infinitely boots never stops after flash?
[Solved]
Weird I cannot get Jasmine to boot without flashing the kernel, but I can get her
to boot with it.
I'm really thinking I need a clean slate on this.
dreyeth said:
Got any ideas for someone who has successfully flashed Jasmine before but then went
and tried a bunch of ROMs to see if they would work but then when I was done
went back to flash Jasmine and now it infinitely boots never stops after flash?
[Solved]
Weird I cannot get Jasmine to boot without flashing the kernel, but I can get her
to boot with it.
I'm really thinking I need a clean slate on this.
Click to expand...
Click to collapse
Do a twrp wipe just like in the picture and you should be good to go.
Sent from my SM-N900V using Tapatalk
alexp1289 said:
View attachment 3723572
Do a twrp wipe just like in the picture and you should be good to go.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Yeah after you're previous post I started doing that, weird thing is I had trouble with it even
doing that, but then I got it resolved.
dreyeth said:
Yeah after you're previous post I started doing that, weird thing is I had trouble with it even
doing that, but then I got it resolved.
Click to expand...
Click to collapse
have u encrypted ur phone ?
yenkoPR said:
have u encrypted ur phone ?
Click to expand...
Click to collapse
Nah the phone wasn't encrypted.

Rom install problems, stock at boot logo everytime ?

So i have been using custom roms on the past 3 galaxy's, and i had custom rom on my galaxy s8 3 days ago.
Okay, the problem i have. I wanted to move from 4.2 - CarHDRom to 5.0 but when i installed the rom at full wipe. After install i reboot and it just gets stuck.
I then go to twrp and wipe again to install the 5.0 again. Still the same, stuck at boot.
I then go get Omega rom and install, stuck again.
I then go back to 4.2 and it's stuck again.
Restore to stock rom using smart swtich, i then go to install Twrp again and try to install the rom.
Stuck again.
I then late at night tried again, again and just let it be so it could boot. Maybe it was me that didn't give it time.
At 01:20 at the night i set it to reboot and just let it be. I just woke up 6 hours later and it's still on the boot logo.
I see that the rom is AQG5, and i used Odin to flash new bootloader but that just made me unable to boot into Twrp and then i restore to stock. Use odin to flash bootloader first then twrp. And still stuck at boot.
Now i am back at stock rom, but want to use a custom again..
What am i doing wrong, i have been working with custom roms for 3 years plus, bricked many of my phones but i unbricked them again. But right now i am lost on what to do
Shuuin said:
So i have been using custom roms on the past 3 galaxy's, and i had custom rom on my galaxy s8 3 days ago.
Okay, the problem i have. I wanted to move from 4.2 - CarHDRom to 5.0 but when i installed the rom at full wipe. After install i reboot and it just gets stuck.
I then go to twrp and wipe again to install the 5.0 again. Still the same, stuck at boot.
I then go get Omega rom and install, stuck again.
I then go back to 4.2 and it's stuck again.
Restore to stock rom using smart swtich, i then go to install Twrp again and try to install the rom.
Stuck again.
I then late at night tried again, again and just let it be so it could boot. Maybe it was me that didn't give it time.
At 01:20 at the night i set it to reboot and just let it be. I just woke up 6 hours later and it's still on the boot logo.
I see that the rom is AQG5, and i used Odin to flash new bootloader but that just made me unable to boot into Twrp and then i restore to stock. Use odin to flash bootloader first then twrp. And still stuck at boot.
Now i am back at stock rom, but want to use a custom again..
What am i doing wrong, i have been working with custom roms for 3 years plus, bricked many of my phones but i unbricked them again. But right now i am lost on what to do
Click to expand...
Click to collapse
Hey,
You need to flash the last Bottloader and Modem with TWRP
You can find it on XDA.
*delete*
Soft-Tech643 said:
Hey,
You need to flash the last Bottloader and Modem with TWRP
You can find it on XDA.
Click to expand...
Click to collapse
The AQG5?
Because it seems i already have it on stock firmware :/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Shuuin said:
The AQG5?
Because it seems i already have it on stock firmware :/
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-s8/help/brick-g950fxxu1aqg5-thanks-to-twrp-3-1-t3650682
Soft-Tech643 said:
https://forum.xda-developers.com/galaxy-s8/help/brick-g950fxxu1aqg5-thanks-to-twrp-3-1-t3650682
Click to expand...
Click to collapse
That thread seems to be about other problems
Shuuin said:
That thread seems to be about other problems
Click to expand...
Click to collapse
Please listen To me. You need to have the good bootloader TWRP and Modem...
I have already the same problems with Google Edition Rom. And I flash the last version of them.
Soft-Tech643 said:
Please listen To me. You need to have the good bootloader TWRP and Modem...
I have already the same problems with Google Edition Rom. And I flash the last version of them.
Click to expand...
Click to collapse
Good, as in lastest TWRP.
I have tried with
twrp-3.1.1-2.
Shuuin said:
Good, as in lastest TWRP.
I have tried with
twrp-3.1.1-2.
Click to expand...
Click to collapse
It worked ?
Everything i talk about in my thread. Was with version 3.1.1-2
I updated everything before install of CarHDrom because of the new AQG5
Soft-Tech643 said:
It worked ?
Click to expand...
Click to collapse
This one ?
http://renovate-themes.de/firmware.html
Shuuin said:
This one ?
http://renovate-themes.de/firmware.html
Click to expand...
Click to collapse
Yes !!! Normally he should work for you.
Soft-Tech643 said:
Yes !!! Normally he should work for you.
Click to expand...
Click to collapse
Imma give it a try again
Shuuin said:
Imma give it a try again
Click to expand...
Click to collapse
Reflash the rom after with full wipe
Soft-Tech643 said:
Reflash the rom after with full wipe
Click to expand...
Click to collapse
Just tried again and still stuck at "Samsung galaxy s8" logo :/
Soft-Tech643 said:
Reflash the rom after with full wipe
Click to expand...
Click to collapse
could you be so kind to provide me with everything you downloaded to your phone :/
Shuuin said:
could you be so kind to provide me with everything you downloaded to your phone :/
Click to expand...
Click to collapse
Give me the link of the rom you trying to install now please..
When I was on Google rom edition. I download the same files... :/
Soft-Tech643 said:
Give me the link of the rom you trying to install now please..
When I was on Google rom edition. I download the same files... :/
Click to expand...
Click to collapse
i am trying to install 5.0 of this https://forum.xda-developers.com/galaxy-s8+/development/rom-u1aqdg-carhdrom-1-t3606125
I was on 4.2 before. And everything started happening after i tried installing 5.0 :/
Shuuin said:
i am trying to install 5.0 of this https://forum.xda-developers.com/galaxy-s8+/development/rom-u1aqdg-carhdrom-1-t3606125
I was on 4.2 before. And everything started happening after i tried installing 5.0 :/
Click to expand...
Click to collapse
If you download the last bootloader and Modem and update TWRP there is non reason that the phone not want to boot..
Have you try rom reinstall the stock firmware et retry from the beginning ?
Soft-Tech643 said:
If you download the last bootloader and Modem and update TWRP there is non reason that the phone not want to boot..
Have you try rom reinstall the stock firmware et retry from the beginning ?
Click to expand...
Click to collapse
I have tried reinstalling from stock firmware 5 times today now
Where did you download the last bootloader and modem from ?

Note 4 (SM-N910P) Q15 firmware boot loops on welcome screen.

Hi guys,
I was able to flash Q15 rom N910PVPU5DQI5 via odin. Successful boot at first and I perform factory reset in Settings > Backup and reset > Factory data reset. After that it boot loops starting at welcome screen.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Fixes I tried:
- wipe cache/ factory reset from stock recovery and flash Q15 rom same issue. Can't flash any other roms maybe because of bootloader image 5.
- flash TWRP, wipe data, cache from there and flash Q15, wipe data, cache again from stock recovery same issue.
- soft reset, safe mode, charge for 10-15 mins then boot same issue.
Thinking of switching to custom roms but I need a non-rooted phone. What else can I do? Please help.
Thanks,
Been able to flash lineage os 14 via TWRP. Everything seems fine except with network signal. No signal at all. Should I flash baseband for my region?
Re-download the firmware. And do a full wipe... 3 times
Sent from my SM-N930P using Tapatalk
Quiero quitar el error de mi samsun note 4 n910p :set werranty bit :kinel
MARILSE said:
Quiero quitar el error de mi samsun note 4 n910p :set werranty bit :kinel
Click to expand...
Click to collapse
Unfortunately it can not be removed once the boot.img was modified
ninja_unmatched said:
Re-download the firmware. And do a full wipe... 3 times
Sent from my SM-N930P using Tapatalk
Click to expand...
Click to collapse
is it possible to root n910pvpu5dqi5 ??
CLaudioman2009 said:
is it possible to root n910pvpu5dqi5 ??
Click to expand...
Click to collapse
Yes it is possible and has been for some time now. There is a rooted ROM based on stock.
https://forum.xda-developers.com/no.../rom-15nov2017-stock-ish-plustidbits-t3705395
There are also several ROMs that will work with the firmware QI5 even though the OP says otherwise if you just look here:
https://forum.xda-developers.com/note-4-sprint/development
ninja_unmatched said:
Yes it is possible and has been for some time now. There is a rooted ROM based on stock.
https://forum.xda-developers.com/no.../rom-15nov2017-stock-ish-plustidbits-t3705395
There are also several ROMs that will work with the firmware QI5 even though the OP says otherwise if you just look here:
https://forum.xda-developers.com/note-4-sprint/development
Click to expand...
Click to collapse
Thank you very much. that rom works but i cant send messages. as i see you have the same phone i would ask you, is there a way to root with magisk?
and another question, will this rom work: https://forum.xda-developers.com/note-4-sprint/development/rom-updated-1-14-2017-t3538051 ??? looks very good !!.
1. Can't send messages?
The stock tidbits works out of box.. never had any issue with sending messages. Actually nvr had that issue with any of the ROMs listed except while they were in early stages but most of them are way past that.
Stock with tidbits works.. The UN7 Rom works also... Even the AOSP ROMs work. If you are having an issue with a ROM ask your question and let it be known in that Rom's thread.
The UN7 ROM I've seen a few have that issue but the fix is in the thread.. in fact there are fixes in the OP. UN7 has the ROM file & another one you flash after that which flashes updates. You gonna have to take the time to search the thread and read.
Magisk?... The ROM itself will flash that for you... (The 2nd file asks you this question during install)
Aside from this if you try other ROMs for the general Snapdragon Note 4 (yes there is a thread for that too) you could use a data fix by tx_dbs_tx
Long story short... look in the thread for your answers. Magisk has worked for awhile now. Now version 18 or 18.1 both work on Lineage OS which is what I am using now. Didn't even have to use any data fix file either.
Sent from my SM-N910P using Tapatalk

Categories

Resources