Unpacking your new Xperia device, Clean it - Xperia Z4/Z3+ General

Hey all
I just unoacked my 2nd Z3+, but I thought Ide share this with the community....
The reason Im onto my 2nd device is because on my 1st Z3+ the camera images had a cloudy ghosting to them and some chromatic abboration.. but what ive realised now is... all Xperia devices are shipped. with the white frosted protective sticky films covering both the back and front of the Xperia that you peel off..
However when I did peel them off I noticed they leave behind a tacky oily residue on the the REAR glass back which is on your fingers when you first use your Z, probably why the back panel gets all "finger marked up" out of the box , but I now wonder if this is also on the camera hence why I got cloudy images.. I dont mean the Display screen itself as the xperia comes with a screen protector already on it, so thats ok..
I just gently cleaned my camera glass with a lint free cloth and a touch of water (no soap) or lense cleaner and it seems to be taking great shots, so if your finding this yourself, give that a try... I will say ... its not the best idea to clean any camera glass too much, as this can cause its own problems.. too much rubbing can build up static which attracts lint and dust particles, also smearing from the cloth.. use a lint free cloth, Personally, Ive found a quick clean every now and again is a good practise
Just thought Ide share this

Nice suggestion. I've had a Z1 compact before, and I'm looking forward in buying Z3+ to replace it. Do you recommend this device? Does it overheat?

mugglearchitect said:
Nice suggestion. I've had a Z1 compact before, and I'm looking forward in buying Z3+ to replace it. Do you recommend this device? Does it overheat?
Click to expand...
Click to collapse
Yes, It overheats while gaming, browsing & using camera at top back of the phone. The heat is a bit higher than normal. Except that it is wonderful phone. If you concern about heat, ignore this phone else go for it.

Average battery
heats tooo much...till 46deg celsius... at that temp its lag a bit
Except all this its good mobile....
Camera is awesome

I rooted mine, debloated and installed project skynet. No lag at all and sits comfortably 35-45 which by modern standards is acceptable. This is a thin phone too remember.

My Z3+ is E6553 Rev. 5, which came with a fast charger in the box, and Ive found the heat is not as bad for me as alot of people have been reporting, I only shoot in 1080p video as well... and yes while is does get hot, its not untouchable... so maybe my Revision is an updated one.
I do really like this phone, its design and UI. I had considered a Z3, but SONY no longer support the Z3. I prefer the Z3+ for its wider camera angle, and extra modes, I know the Z3+ still uses the SONY RS sensor, but i read they had updated the imaging algorythms and changed a few things. Also the bottom mounted USB port.. (the usb covered flap on the Z3 is infuriating). Also I find the overall volume is louder for both ringer and music as well as the speakers being moved to the edges so they dont collect as much gunk and pocket lint.
Yeah.. its a great phone. Over here in UK you can buy for about £250 - £300 sim free, so its a great buy

NightOrchid said:
My Z3+ is E6553 Rev. 5, which came with a fast charger in the box, and Ive found the heat is not as bad for me as alot of people have been reporting, I only shoot in 1080p video as well... and yes while is does get hot, its not untouchable... so maybe my Revision is an updated one.
I do really like this phone, its design and UI. I had considered a Z3, but SONY no longer support the Z3. I prefer the Z3+ for its wider camera angle, and extra modes, I know the Z3+ still uses the SONY RS sensor, but i read they had updated the imaging algorythms and changed a few things. Also the bottom mounted USB port.. (the usb covered flap on the Z3 is infuriating). Also I find the overall volume is louder for both ringer and music as well as the speakers being moved to the edges so they dont collect as much gunk and pocket lint.
Yeah.. its a great phone. Over here in UK you can buy for about £250 - £300 sim free, so its a great buy
Click to expand...
Click to collapse
How will I check which rev I got?

mugglearchitect said:
How will I check which rev I got?
Click to expand...
Click to collapse
Its on the side of the box.. its got the Model, and a few bar codes.. IMEI, Model Code etc or, inside the box, there should be a set of bar coded stickers (you know the ones you stick on the device if you need to return it for repairs)... should be on there if not on the boxc.

Good wishes bro.... @NightOrchid bro can u show us a pic of how to chk that rev5
Sent from my SM-G7102 using Tapatalk

There are several pictures in this thread http://forum.xda-developers.com/xperia-z4/help/z3-revision-6-t3162394

Trilliard said:
There are several pictures in this thread http://forum.xda-developers.com/xperia-z4/help/z3-revision-6-t3162394
Click to expand...
Click to collapse
thank you...but do u know whats the latest rev for z3+ as i want to buy one.....
Sent from my SM-G7102 using Tapatalk

I dont know exacly, but looks like rev 5 is the latest one. But somebudy said that rev 4 is for single sim version and rev 5 is for dual sim version. That could also be possible.

Trilliard said:
I dont know exacly, but looks like rev 5 is the latest one. But somebudy said that rev 4 is for single sim version and rev 5 is for dual sim version. That could also be possible.
Click to expand...
Click to collapse
but the link u shared it says rev6
Sent from my SM-G7102 using Tapatalk

Yes, but no one has confirmed that there is a rev. 6

Trilliard said:
Yes, but no one has confirmed that there is a rev. 6
Click to expand...
Click to collapse
oh okay....thnx....
Sent from my SM-G7102 using Tapatalk

Hi there, today i got my brand new z3+ single SIM Rev. 5. Nice package... Glas Screen Protector, USB OTG Cable EC310, Smart Cover SCR30, Charger EP880 with 1500mA, Sony MH750 Headset, Micro USB Cable EC803 and a 30 Euro Gift Card for "HelloFresh" dont know what that is xD. The Phone itself is a little bit sticky, but after a clean with a damp microfibre cloth its perfect. I dont know why here on XDA some people ask for a Kernel with D2tW, its in the Stock Rom integrated already ("Settings->Display" on the Bottom of this menu).

Trilliard said:
Hi there, today i got my brand new z3+ single SIM Rev. 5. Nice package... Glas Screen Protector, USB OTG Cable EC310, Smart Cover SCR30, Charger EP880 with 1500mA, Sony MH750 Headset, Micro USB Cable EC803 and a 30 Euro Gift Card for "HelloFresh" dont know what that is xD. The Phone itself is a little bit sticky, but after a clean with a damp microfibre cloth its perfect. I dont know why here on XDA some people ask for a Kernel with D2tW, its in the Stock Rom integrated already ("Settings->Display" on the Bottom of this menu).
Click to expand...
Click to collapse
bro check the heating issue after playin a heavy game.....and plz report soon.....about the heating issue..is it solved after marshmallow update
Sent from my SM-G7102 using Tapatalk

Well i needed five hours now to setup everything and let the four system updates install. Now i wanne have something from that nice weather saturday here . I will try it tomorrow.

Trilliard said:
Well i needed five hours now to setup everything and let the four system updates install. Now i wanne have something from that nice weather saturday here . I will try it tomorrow.
Click to expand...
Click to collapse
bro just check tapatalk private messages...i sent u some messages....thankyou
Sent from my SM-G7102 using Tapatalk

Related

Got my Xperia Z!!! :)

Hi guys,
Just wanted to say that I got my Xperia Z today from Play Poland
It's just brilliant
Tell us more.
Kurwa No! Jest ziabiesta?
:cyclops:
Zaaaaaaaaajebista!!!
OK, Tell me what you want to know and I'll tell you.
I guess that most of the people are interested in screen quality
I have to tell you that I was terrified, when I first turned in on. It looked like the one that I saw i Sony Center. Totaly washed out colors. No blacks etc. Than I changed wallpaper to a picure with lots of black, and Tada!! Beautiful black and contrast!!!!! Sony just changed colors of the whole UI, so there is no black, only gray . Apps and wallpapers look great!
were there any memory card (micro sd ) inside the phone ??? 2,4,8,16,32??
huball said:
Zaaaaaaaaajebista!!!
OK, Tell me what you want to know and I'll tell you.
I guess that most of the people are interested in screen quality
I have to tell you that I was terrified, when I first turned in on. It looked like the one that I saw i Sony Center. Totaly washed out colors. No blacks etc. Than I changed wallpaper to a picure with lots of black, and Tada!! Beautiful black and contrast!!!!! Sony just changed colors of the whole UI, so there is no black, only gray . Apps and wallpapers look great!
Click to expand...
Click to collapse
Yes, I have seen it myself in real life and can confirm this. The screen looks much better then people expect. Plus that everybody now has their "expectations" set to low, they will be even more impressed. I mean come on, would you really think Sony would put a TERRIBLE display in their flagship? They want to capture the market, you are not going to do that with a terrible screen.
The screen is SHARP, BIG, BEAUTIFUL. Indeed, Sony has chosen a lot of gray instead of black (bottom nav bar + status bar + background in settings). That's not a washed out screen, that's just the colour Sony chose. I can understand people are confused by this, I was as well. But when I saw the screen in real life, I saw that's it's a good screen. Yes, the viewing angles are not as good as the S-LCD3/HD AMOLED screens, but it's not THAT bad as some pictures made you think.
I think that the XZ offers so much that those "not perfect" viewing angles can go to hell
marcoplo said:
were there any memory card (micro sd ) inside the phone ??? 2,4,8,16,32??
Click to expand...
Click to collapse
No, no memory card. Just charger, microusb cable, headphones ang user manual.
Sent from my C6603 using xda app-developers app
+1 xda Mark. I saw the device at CES and didn't believe the guy when he said it was TN. Best looking TN I've ever seen. Looked at some photos online both on my buddys s3 and the Z, and the difference was NOT what you see in pictures.
Before anyone leaves this device because of the screen, take a look IRL first.
Sent from my C6603 using xda app-developers app
huball said:
Zaaaaaaaaajebista!!!
Click to expand...
Click to collapse
Mało powiedziane że zajebista. Niesamowite urządzenie, przyjemnie na nie patrzeć, o używaniu nie wspomne
BTW. Guys, I don't know if that's Polish-distribution specific but we have two screen protectors bundled with the phone. One for front and one for back
Akiainavas said:
Mało powiedziane że zajebista. Niesamowite urządzenie, przyjemnie na nie patrzeć, o używaniu nie wspomne
BTW. Guys, I don't know if that's Polish-distribution specific but we have two screen protectors bundled with the phone. One for front and one for back
Click to expand...
Click to collapse
Yeah, mine came with them too. Did you apply them? Apparently the front is already equipped with a screen protector, why would they add another one?
Akiainavas said:
Mało powiedziane że zajebista. Niesamowite urządzenie, przyjemnie na nie patrzeć, o używaniu nie wspomne
BTW. Guys, I don't know if that's Polish-distribution specific but we have two screen protectors bundled with the phone. One for front and one for back
Click to expand...
Click to collapse
I read that's a standard on Sony phones
Sent from my C6603 using xda app-developers app
hmmm power (usb) cable has no RC protection looks ill stick to my x2 or neo cable than when phone hits our market
ps any1 needs sony earphones i have 2many of em already
huball said:
I read that's a standard on Sony phones
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
I think that the pre applied ones shouldn't be removed, and are quite thick and difficult to remove. So if the screen protectors in the box have normal thickness my guess is that it is to protect the screen protector from getting scratched. A scratch protector for a scatter protector
can you check whether i can use 5 pin MHL cable or 11 pin MHL cable ! would be interesting to know !!!!!!
kuba1410 said:
Yeah, mine came with them too. Did you apply them? Apparently the front is already equipped with a screen protector, why would they add another one?
Click to expand...
Click to collapse
No that its actually a shatter proof sheet supplied on all sony phones for extra protection, screen protector is apparently supposed to go on top of that
Sent from my LG-P880 using xda premium
Lag?
Any lag, stuttering, or frame drops when opening apps and moving around the UI?
marcoplo said:
can you check whether i can use 5 pin MHL cable or 11 pin MHL cable ! would be interesting to know !!!!!!
Click to expand...
Click to collapse
I am not sure which one I have, I I bought mine in August 2011 I think they used 5-pin cables then (?) - it works with the XZ.
jayman1986 said:
No that its actually a shatter proof sheet supplied on all sony phones for extra protection, screen protector is apparently supposed to go on top of that
Sent from my LG-P880 using xda premium
Click to expand...
Click to collapse
Thanks. One other thing maybe someone else will know. There is a NFC sticker at the back, how does it go with the back protector?
kuba1410 said:
I am not sure which one I have, I I bought mine in August 2011 I think they used 5-pin cables then (?) - it works with the XZ.
Thanks. One other thing maybe someone else will know. There is a NFC sticker at the back, how does it go with the back protector?
Click to expand...
Click to collapse
I think you should remove it
kuba1410 said:
Yeah, mine came with them too. Did you apply them? Apparently the front is already equipped with a screen protector, why would they add another one?
Click to expand...
Click to collapse
The phone comes with anti shatter film its not a screen protector and you are advised to put a standard screen protector on top of this pre applied film.

HTC One tiny gap between casing

https://mail-attachment.googleusercontent.com/attachment/u/0/?ui=2&ik=41cb339f46&view=att&th=13d8340b74746c5a&attid=0.1&disp=inline&safe=1&zw&saduie=AG9B_P_Q5-vWqhENU8nd5ekGtYFt&sadet=1363706767414&sads=CMeEp3tEkU1SbCsFN3rfu84Dgs4&sadssc=17
https://mail-attachment.googleuserc...363706870695&sads=p-2Xb2GQeBUaK85Lopw2gw6D9Hs
Afternoon all,
So yeah I'm loving this phone greatly, but I've noticed something horrible for a phone so well made.
If anyway else owns one can you please check if your headset has a tiny gap ( Im really do mean tiny gap) between the front metal casing and
the cream looking plastic band around the phone. So were the headjack and on switch is . . . .
I noticed it last night and if I press the back and front together the gap closes.
After speaking to P4U they said no one else has rang in with such problem and they said they would exchange it wen more arrive in stock.
I ended up going in store were I discover they ave one there but is a pre ordered handset. The guy did open it up and checked both handsets.
They new one did also have a tiny gap but not as bad?
Bit shocked as I havent really used the phone alot as Im still using my S3 till I pay my contract off.
Anyone else got this?7
Cheers
Re: HTC One Owners check it out!
I have read somewhere 2 weeks ago it is a problem for some demo set. But seems it existing on retail phone now. Also I heard iphone5 has such problem but people think it acceptable.
So maybe other users can give their view.
And you would better to have a clear photo upload others can judge.
mmx6688 said:
I have read somewhere 2 weeks ago it is a problem for some demo set. But seems it existing on retail phone now. Also I heard iphone5 has such problem but people think it acceptable.
So maybe other users can give their view.
And you would better to have a clear photo upload others can judge.
Click to expand...
Click to collapse
What would be best way to post a photo on here? I havent actually needed to do it before?
Re: HTC One Owners check it out!
There was another thread on this exact issue. It is very small, but then again these phones aren't exacty cheap. So should be uniform all around.
Sent from a galaxy far away!
ILS_SuperNova said:
What would be best way to post a photo on here? I havent actually needed to do it before?
Click to expand...
Click to collapse
Select Quick Reply and then Select Go Advanced. Over at the top, click on the attachment incon (looks like a paper clip) and browse to where ever the photo is saved
Re: HTC One Owners check it out!
I got mine today, have looked but not used the phone yet. On both the top and bottom, I can squeeze and a hairline gap will come together, but I don't think this is a problem really. It is negligible and it probably won't have any impact at all, the phone still seems premium and solid in the hand, and it is not like they advertise it as being waterproof or anything in which case this would be an issue.
Sent from my Galaxy Nexus using Tapatalk 2
I have a slight gap on the top, nowhere else though, and its very slight, I keep a case on it at all times though, so no big issue
Ive put two links to photos I took. Hopefully the links work. One is with gap and then me pushing the edges together . . .
Re: HTC One Owners check it out!
ILS_SuperNova said:
Ive put two links to photos I took. Hopefully the links work
Click to expand...
Click to collapse
Don't work for me
Sent from my Desire HD using Tapatalk 2
https://lh4.googleusercontent.com/-...AAAAAAFc/34GVNAI3mKc/s661/20130319_152241.jpg
Hopefully these work. Gap
https://lh5.googleusercontent.com/-...AAAAAAFg/LjpkmfaPpBs/s496/20130319_152305.jpg
me pressing gap together
ILS_SuperNova said:
https://lh4.googleusercontent.com/-...AAAAAAFc/34GVNAI3mKc/s661/20130319_152241.jpg
Hopefully these work. Gap
https://lh5.googleusercontent.com/-...AAAAAAFg/LjpkmfaPpBs/s496/20130319_152305.jpg
me pressing gap together
Click to expand...
Click to collapse
If that was my phone I would send it back but that's just me.... hope mine is ok when I get home later on.
This gap may be engineered to provide for thermal expansion differences between glass and aluminum
Definitely looks like a defect to me. Lint, dust, water etc could all get in there very easily and cause problems down the line. I'd get it replaced.
ILS_SuperNova said:
https://lh4.googleusercontent.com/-...AAAAAAFc/34GVNAI3mKc/s661/20130319_152241.jpg
Hopefully these work. Gap
https://lh5.googleusercontent.com/-...AAAAAAFg/LjpkmfaPpBs/s496/20130319_152305.jpg
me pressing gap together
Click to expand...
Click to collapse
i would say its fine i have something familiar on my One X between the metal rim holding the screen and the unibody
believe me you have not seen defects this is nothing compared to last year
i would keep it, can i?
llothar said:
This gap may be engineered to provide for thermal expansion differences between glass and aluminum
Click to expand...
Click to collapse
My mates htc one had zero gap all the way around.
Yeah I maybe abit paranoid on this matter. After seeing the other newly opened htc one and seeing that also had a little gap then I though maybe
its just the way its made. I will see hopefully thursday if more come into stock.
Re: HTC One Owners check it out!
If I'm looking at the same thing is u on top of the phone theres a very very small gap between the metal casing and plastic filler.
Can't see I'm bothered about a gap of 0.25mm though. I don't think I'd ever want a replacement.
Sent from my HTC One using xda premium
This photo is posted by others sometime ago.
But this kind of gap also on other phones, like S4.
llothar said:
This gap may be engineered to provide for thermal expansion differences between glass and aluminum
Click to expand...
Click to collapse
I can definitely confirm such behavior in my One X, it expands a little from heat
but by design? i don't know, HTC promised zero gap didn't they?
Thread title is misleading: please change it.

Rumor about the hole of the earpiece! Waterproof Rumor!

Browsing other Xperia Z2 forum, a user asked about the water resistance and input headset, since it has no external insulation, as covers. One reviewer said the author of the following topic:
"Check if you don't see a screen light in the hole, there were some not sealed examples problems.. it should be dark when the phone is unlocked. Would help to make sure it is sealed."
This actually makes sense?
I tested mine and when I turn on the device screen I can see light through the hole of the headset!
Has anyone tested to see if it makes sense?
I haven't heard about this, but for the screen gap issue Sony said you could take your phone to a repair center for a water resistance test, I'm sure they would do this for you if you are worried about it.
I see the light of the screen through the jack and I plunged my phone several times in the water, no problem.
delsus said:
I haven't heard about this, but for the screen gap issue Sony said you could take your phone to a repair center for a water resistance test, I'm sure they would do this for you if you are worried about it.
Click to expand...
Click to collapse
Yes, regarding the gaps I'm aware, but I was worried that another rumor concerning the entry of the headset!
AndroidGaalaxy said:
I see the light of the screen through the jack and I plunged my phone several times in the water, no problem.
Click to expand...
Click to collapse
Oh thanks !!!
Now I'm much more peaceful!
I'll expect more cases to be even quieter!
BR4DOKYBrazil said:
Yes, regarding the gaps I'm aware, but I was worried that another rumor concerning the entry of the headset!
Click to expand...
Click to collapse
As I said though if you are worried about the headphone plug, they should be able to test that for water resistance as well.
Sent from my D6503 using Tapatalk
delsus said:
As I said though if you are worried about the headphone plug, they should be able to test that for water resistance as well.
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Yeap, but the tricky thing is that I bought my device in another country! In my country is not yet released!
Have no guarantee of the device!
BR4DOKYBrazil said:
Yeap, but the tricky thing is that I bought my device in another country! In my country is not yet released!
Have no guarantee of the device!
Click to expand...
Click to collapse
Ahh Ok I see your problem
Sent from my D6503 using Tapatalk
I can see the light too, no water has passed so far (at least nothing that effected the phone). Not sure if a straight way to the digitizer does any good.. Like is the digitizer waterproof?
This sounds strange but put the hole to your mouth and such on it like a straw then plug it with your tongue. If the suction stays then your good and waterproof.
Sent from my SGH-I757M using XDA Free mobile app
I can also see light and phone is waterproof. And its not a hole, its just thin plastic leaking light through itself
Sent from my D6503 using Tapatalk 2
NuriJ said:
I can see the light too, no water has passed so far (at least nothing that effected the phone). Not sure if a straight way to the digitizer does any good.. Like is the digitizer waterproof?
Click to expand...
Click to collapse
feis said:
I can also see light and phone is waterproof. And its not a hole, its just thin plastic leaking light through itself
Sent from my D6503 using Tapatalk 2
Click to expand...
Click to collapse
I was very relieved! The people have to be careful with things that speak the internet! This sometimes ends up becoming epic proportions and great discomfort to the users of the device!
Actually I noticed that there is a thin plastic near the light!
AndroidGaalaxy said:
I see the light of the screen through the jack and I plunged my phone several times in the water, no problem.
Click to expand...
Click to collapse
feis said:
I can also see light and phone is waterproof. And its not a hole, its just thin plastic leaking light through itself
Sent from my D6503 using Tapatalk 2
Click to expand...
Click to collapse
Yours devices have gaps?
BR4DOKYBrazil said:
Yours devices have gaps?
Click to expand...
Click to collapse
No no, I have a gap between the speaker and the edge of the screen, and even another gap between the touchscreen and the edge, no problem.
Note that I have not tried to immerse the phone more than 30 cm deep
AndroidGaalaxy said:
No no, I have a gap between the speaker and the edge of the screen, and even another gap between the touchscreen and the edge, no problem.
Note that I have not tried to immerse the phone more than 30 cm deep
Click to expand...
Click to collapse
Would you take a picture?
I do not know if you saw, but it has a huge discussion about the water resistance of the device with those gaps!
If you can take pictures would help a lot! A macro photo of good resolution!
http://forum.xda-developers.com/showthread.php?t=2744197

G3 Build quality thread

I've had my G3 for about a week now and I absolutely love the device. I'd like to have a discussion about build quality of the device since there's some things I've noticed with my 32gb D855 model that I'm wondering if others have had also.
1) The digitizer is quite noticeable, I guess my eyes have adjusted a bit now but it is there and quite noticeable when I pay attention
2) The back plate is screaming poor quality: it is very creaky near the top above the infrared and also around the volume down key you can really press the device and hear it creaking like a Samsung device
3) Unfortunately after caring for it with my life somehow the back cover got a huge scratch..I don't possibly know from what..a fleck of dust in the air or Something but still this shouldn't have gotten such an ugly huge scratch so easily!
4) Dust/sand or dirt is easily getting into the bezels right where the screen ends
5) As mentioned in another thread I've had the spontaneous shut down but let's not delve into that on this thread
Anyone else want to share their experiences?
Sent from my LG-D855 using XDA Premium 4 mobile app
I think the device feels wonderful when im using it. But I do agree that one drop and this thing is gonna be in trouble.
I managed to put a 2inch scratch on the back and I'm so carefull but managed to scratch it.
ladelfm said:
I've had my G3 for about a week now and I absolutely love the device. I'd like to have a discussion about build quality of the device since there's some things I've noticed with my 32gb D855 model that I'm wondering if others have had also.
1) The digitizer is quite noticeable, I guess my eyes have adjusted a bit now but it is there and quite noticeable when I pay attention
2) The back plate is screaming poor quality: it is very creaky near the top above the infrared and also around the volume down key you can really press the device and hear it creaking like a Samsung device
3) Unfortunately after caring for it with my life somehow the back cover got a huge scratch..I don't possibly know from what..a fleck of dust in the air or Something but still this shouldn't have gotten such an ugly huge scratch so easily!
4) Dust/sand or dirt is easily getting into the bezels right where the screen ends
5) As mentioned in another thread I've had the spontaneous shut down but let's not delve into that on this thread
Anyone else want to share their experiences?
Sent from my LG-D855 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Just got mine yesterday but #2 is not an issue for me. The back is very solid and doesn't have any flex at all. I am going to put a slim case on mine though and I already have a tempered glass screen shield.
Well, mine seems pretty solid so far (got mine on Monday), the only thing from your list i noticed as well is the dust at the bezel, but it's not really in the bezel, it's just sticking at the edges, because the bezel is slightly higher than the screen, that's a bit annoying, but not really bad, because it can be easily swiped away. Except of that, I'm pretty pleased with the build quality so far, looks and feels premium, just the back doesn't feel that slick, because of the plastic, but it's still not bad at all.
Oh, and the back buttons are slightly too hard to push, but that's also not a big deal.
So, great device, I'm a happy owner^^
Gesendet von meinem LG-D855 mit Tapatalk
ladelfm said:
I've had my G3 for about a week now and I absolutely love the device. I'd like to have a discussion about build quality of the device since there's some things I've noticed with my 32gb D855 model that I'm wondering if others have had also.
1) The digitizer is quite noticeable, I guess my eyes have adjusted a bit now but it is there and quite noticeable when I pay attention
2) The back plate is screaming poor quality: it is very creaky near the top above the infrared and also around the volume down key you can really press the device and hear it creaking like a Samsung device
3) Unfortunately after caring for it with my life somehow the back cover got a huge scratch..I don't possibly know from what..a fleck of dust in the air or Something but still this shouldn't have gotten such an ugly huge scratch so easily!
4) Dust/sand or dirt is easily getting into the bezels right where the screen ends
5) As mentioned in another thread I've had the spontaneous shut down but let's not delve into that on this thread
Anyone else want to share their experiences?
Sent from my LG-D855 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Do we have the same device?
1: I can barely see the digitizer unless i shine a bright light into the screen.
2: the back cover on mine fits perfectly, to the millimeter. The only creaking i hear is if i try to twist the device at either end which is acceptable as its a removable cover so should have some give.
3: that is unfortunate
4: Is this not normal of all phones. They all have a small gap between the glass and phone body. its hard to avoid, but not very big on the G3.
5: ive not had this issue fortunately.
Ive found the build quality to be very good. everything fits very nicely. and its a big step up in quality from the nexus 5 which already had a decent build quality.
Had mine for 6 days, comparing this to say an s4 or s5 is like comparing a Citroen 2CV against a Ferrari, the difference is immense in terms of both looks,build quality and feel. Loving it ?
Just got mine an hour ago. I'm coming from an S4. This phone feels cheap in comparison. I'm not sure if I'll get used to not having the true black that one gets with an AMOLED screen. But hey, it's only been an hour.:beer:
Sent from my LG-D851 using XDA Free mobile app
I've had mine for nearly 2 weeks and it's been great. Got a slim case and applied the screen protector it came with it. No complaints here!
rjscott2005 said:
Just got mine an hour ago. I'm coming from an S4. This phone feels cheap in comparison. I'm not sure if I'll get used to not having the true black that one gets with an AMOLED screen. But hey, it's only been an hour.:beer:
Sent from my LG-D851 using XDA Free mobile app
Click to expand...
Click to collapse
It really is a big difference between AMOLED and IPS screens. There completely different technologies, keep in mind though the IPS screen is more closer to every other screen you look at every day so its not like you dont use them already.
Im not liking how the G3 is get bashed around recently, if your not happy with it then i suggest people go back to samsung. Ive had it over a week now and the phone grows on me more every day. Once roms and tweeks come out this phone will be even more amazing
ant78 said:
Im not liking how the G3 is get bashed around recently, if your not happy with it then i suggest people go back to samsung. Ive had it over a week now and the phone grows on me more every day. Once roms and tweeks come out this phone will be even more amazing
Click to expand...
Click to collapse
Is not bashing if its true. If you like the device then good for you.
Anyways the phone I had came with scratches on the back. The back seems incredibly easy to scratch.
Lostatsea23 said:
Anyways the phone I had came with scratches on the back. The back seems incredibly easy to scratch.
Click to expand...
Click to collapse
Get it replaced.
Dubhar said:
Get it replaced.
Click to expand...
Click to collapse
Can't. Imported it.
Dubhar said:
It really is a big difference between AMOLED and IPS screens. There completely different technologies, keep in mind though the IPS screen is more closer to every other screen you look at every day so its not like you dont use them already.
Click to expand...
Click to collapse
So far I like it.
Sent from my LG-D851 using XDA Free mobile app
Lostatsea23 said:
Can't. Imported it.
Click to expand...
Click to collapse
ah I see have you had any more scratches? Mines been in a case so ive no idea how easily it wil scratch. All my phones have scratched though.
Dubhar said:
ah I see have you had any more scratches? Mines been in a case so ive no idea how easily it wil scratch. All my phones have scratched though.
Click to expand...
Click to collapse
Yes even my case scratched it. Idk how it got scratched so easily !
rjscott2005 said:
Just got mine an hour ago. I'm coming from an S4. This phone feels cheap in comparison. I'm not sure if I'll get used to not having the true black that one gets with an AMOLED screen. But hey, it's only been an hour.[emoji481]
Sent from my LG-D851 using XDA Free mobile app
Click to expand...
Click to collapse
Samsung uses ultra high metal grade plastics.
americasteam said:
Samsung uses ultra high metal grade plastics.
Click to expand...
Click to collapse
Touche :thumbup:
Sent from my LG-D851 using XDA Free mobile app
americasteam said:
Samsung uses ultra high metal grade plastics.
Click to expand...
Click to collapse
Is that sarcasm? Lol

I'm doing a tally on Z5 series affected by the left-hand blur issue

I was planning on buying a unit but discovered it had the left-hand blur issue. It was a Xperia Z5 E6683 Rev 2 Black model.
I then tried another one from the same store, Xperia Z5 E6683 Rev 2 Gold and this DID NOT have the left-hand blur.
So I was thinking if this is just a coincidence or the problem is prevalent on a set of models.
Please share whether yours suffers from the problem or not as well as your phones model/color/rev#/week manufactured (there is another tray in sim card tray area, you can pull it out and there is all the device info). and I will make a tally of it.
Thank you!
EDIT: @yyiimm has created a Google Form so that users can enter their own info. Please use this instead from now on. You can access it below:
Form: https://docs.google.com/forms/d/1DSJM1ll-ADWu_a7v3KHIa72CQ3lu4Ogb9UlHzPyfTr4/viewform
Result: https://docs.google.com/spreadsheet...nB842IFo_sPjNFHDFlqpjhVk8/edit#gid=1360823067
OLD Form (if you're interested in seeing the tally I had before, here is the old form): https://goo.gl/EBFmbo
Green Rev4 No Blur
Sent from my E6653 using Tapatalk
komugi said:
Green Rev4 No Blur
Sent from my E6653 using Tapatalk
Click to expand...
Click to collapse
Noted thanks!
i gave up, REV 3 blur on both sides and center is messed up. I am waiting for the camera module to be available for sale and imma swap it myself. the module only cost 25 USD
LitoNi said:
i gave up, REV 3 blur on both sides and center is messed up. I am waiting for the camera module to be available for sale and imma swap it myself. the module only cost 25 USD
Click to expand...
Click to collapse
Too bad Thanks for the info anyway, I'll take note of it
I have two black E6653. Rev 4 from Taiwan and Rev 2 from Germany, both with no blur.
Excuse my ignorance; how do I discover the Rev #?
Green model, bought UK within a week of launch; no left hand side issue. Slight barrelling at far edges but that's normal, as far as I can see - it's certainly not excessive and generally makes no difference.
Timaustin2000 said:
Excuse my ignorance; how do I discover the Rev #?
Green model, bought UK within a week of launch; no left hand side issue. Slight barrelling at far edges but that's normal, as far as I can see - it's certainly not excessive and generally makes no difference.
Click to expand...
Click to collapse
Should say on the box.
Timaustin2000 said:
Excuse my ignorance; how do I discover the Rev #?
Green model, bought UK within a week of launch; no left hand side issue. Slight barrelling at far edges but that's normal, as far as I can see - it's certainly not excessive and generally makes no difference.
Click to expand...
Click to collapse
You can see it on the box, theres a sticker somewhere (most likely on the side)
augie7107 said:
I have two black E6653. Rev 4 from Taiwan and Rev 2 from Germany, both with no blur.
Click to expand...
Click to collapse
Done, added to the tally
SDR-1970 said:
Should say on the box.
Click to expand...
Click to collapse
Fair enough: Rev 3, green, UK, no left hand blur. Camera perfect.
LitoNi said:
i gave up, REV 3 blur on both sides and center is messed up. I am waiting for the camera module to be available for sale and imma swap it myself. the module only cost 25 USD
Click to expand...
Click to collapse
Dang, that's exactly what I would've decided to do. Meantime, do you think it could be caused by the lens cover itself? Some people in the past got much better shots after removing the back cover! If that's the case, maybe you could try to remove & re-align the back cover & camera module.
TW Rev4 (Green), no blur.
I don't think i have the blur?
https://goo.gl/photos/3t6NChFKrQpteFma6
https://goo.gl/photos/PaqsrsDq4jGAwhYP7
Sent from my E6653 using Tapatalk
The lens fisheyes at long focal lengths which causes it. Pretty normal behaviour for such a wide angle small lense, but typically it's the end of the world on here.
It's something normally corrected in software but isn't currently for some reason. I guess the current camera app only being a place holder has something to do with it.
Ben36 said:
I don't think i have the blur?
https://goo.gl/photos/3t6NChFKrQpteFma6
https://goo.gl/photos/PaqsrsDq4jGAwhYP7
Sent from my E6653 using Tapatalk
Click to expand...
Click to collapse
They look perfectly normal to me. Also please provide Rev/color !
Ben36 said:
I don't think i have the blur?
https://goo.gl/photos/3t6NChFKrQpteFma6
https://goo.gl/photos/PaqsrsDq4jGAwhYP7
Sent from my E6653 using Tapatalk
Click to expand...
Click to collapse
Perfectly fine photos, good luck you have there!
So far, based on the current tally, it seems a lot more people have Z5 with no blur. Though of course, this is just based on those replying to this thread. and the reddit post..
Rev 2 Black UK unbranded and thankfully no blur
What is the left hand blur ypu are talking about?
schecter7 said:
They look perfectly normal to me. Also please provide Rev/color !
Click to expand...
Click to collapse
Pretty sure it's rev 2 uk unbranded black
Can someone post a picture which clearly shows the blur?
Sent from my E6653 using Tapatalk

Categories

Resources