Database Users

Anyone else's rear bottom plastic ill fitting?

This is literally the only thing I don't like about the phone. On my ~3 day old ATT Nexus One, the right side (When looking at the screen), on the side, the plastic is just loose enough that your fingernail can catch it. It seems insanely minor, but it's a huge annoyance because that's where your fingers rest, so it's constant sharp plastic edge.
Is there any way to remove and refit it, or maybe order a replacement cover? It's the plastic part with "HTC" on it. I really don't want to fight with HTC over a return for such a niggling issue

Mine was, sent it to HTC and they sorted it. Looking at the tear down pics, it wouldn't be hard to DIY it.

Rusty! said:
Mine was, sent it to HTC and they sorted it. Looking at the tear down pics, it wouldn't be hard to DIY it.
Click to expand...
Click to collapse
Exactly. I'm torn as to rather I want to screw with it myself or go through the hassle of sending it in. Did they just send you a new phone and a box to return your old one, or did you have to actually send it in for repair?

I sent it to them (well, they collected it), had it for a few days and returned it. Not a replacement, which I was happy with as my unit appears to be a goodun.

Rusty! said:
I sent it to them (well, they collected it), had it for a few days and returned it. Not a replacement, which I was happy with as my unit appears to be a goodun.
Click to expand...
Click to collapse
Yeah, but I sold my iPhone already and can't really be phoneless for a few days

You might be able to get an advance replacement if you ask. Or Google for the tear down, it pops off.

Rusty! said:
You might be able to get an advance replacement if you ask. Or Google for the tear down, it pops off.
Click to expand...
Click to collapse
Yeah, I saw the teardown vid, seems to just pull off with enough force, I'm just unsure if I can make it any better. I'll wait and see if anyone has DIY'ed it

Same problem here, I thought I was the only one. =) I agree that it's really minor, but if it's something that could be fixed that would be nice.

Mine sticks out on the right side, too. NBD for me, but that's odd.

Yeah, I'm glad I'm not the only one too. In the teardown vid on youtube they just pull it off with a plastic iphone tool. I'm kinda tempted to try, and see if I can tell what's making it do that.

i have this issue too. to me, it's a minor cosmetic issue. and how will you know that the one they send you doesn't also have that issue?

My beef is the glass on the screen sits just below the sides of the metal.. leaving a sharp ledge on both sides of the screen where it should be flush

vexingv said:
i have this issue too. to me, it's a minor cosmetic issue. and how will you know that the one they send you doesn't also have that issue?
Click to expand...
Click to collapse
Exactly, hence my hesitation to try to warranty it.

I had a chance to look at several at&t N1s and I noticed this too. The bottom part on about half of them had a larger gap than there should have been. Hopefully it's easy to DIY fix.

How can AT&T N1s be different from T-Mobile one's exactly? There all being made by HTC, just of course with different radios.. why would there be cosmetic differences..? I didn't know carriers had an input in how [HTC] made their phones.. if you know what I mean.

Eclair~ said:
How can AT&T N1s be different from T-Mobile one's exactly? There all being made by HTC, just of course with different radios.. why would there be cosmetic differences..? I didn't know carriers had an input in how [HTC] made their phones.. if you know what I mean.
Click to expand...
Click to collapse
It's possible that the t-mobile ones had the same problem. Luckily my phone hasn't had any problems really. But it's also possible for the manufacturer to make small adjustments on their lines to increase efficiency, that's why different batches/serial numbers come out screwy sometimes.

Story on Engadget about the screen coming loose

Mine apparently is doing it also I didnt notice it until I looked in the dark. Mines mild right now, but its def coming up...
http://www.engadget.com/2010/06/13/htc-evo-suffering-from-glass-separation-issues/

psufan5 said:
Mine apparently is doing it also I didnt notice it until I looked in the dark. Mines mild right now, but its def coming up...
http://www.engadget.com/2010/06/13/htc-evo-suffering-from-glass-separation-issues/
Click to expand...
Click to collapse
not a big surprise. probably exactly the same crappy screen adhesion problems that were leading to all the dust under the nexus screens... :/

mine is starting to do it as well, I can feel it slightly raised above the bezel

What problems will manifest due to this problem?
regards
qu1nn

What problems will manifest due to this problem?
regards
qu1nn
Click to expand...
Click to collapse
Dust under the screen. And you can see light leaking out of the bottom of the phone
-------------------------------------
Sent via the XDA Tapatalk App

Wow this is totally sh*tty
I just placed my order for the Evo and should be receiving it sometime this week.
I am wondering if maybe keeping the phone in a tight-fitting silicone case might help to reduce any possible "DISPLACEMENT" of the screen

glad to see this is getting media attention. i'm sick of htc and their crappy quality control. i went through this whole thing with my hero already...
and yes, my screen is coming apart too. it definitely wasn't like that when i got it last week.

redrazr7791 said:
Wow this is totally sh*tty
I just placed my order for the Evo and should be receiving it sometime this week.
I am wondering if maybe keeping the phone in a tight-fitting silicone case might help to reduce any possible "uprising" of the screen
Click to expand...
Click to collapse
Yeah can't have the screen gathering up and revolting

mrono said:
Yeah can't have the screen gathering up and revolting
Click to expand...
Click to collapse
I couldn't think of another word to use
If HTC continues to mass produce phones that fall apart because of faulty manufacturing...then the customers just might revolt

Dang it!!! mine starting to raise up as well I love this phone and Sprint service but I'm afraid the problem will worsen up as the time passes. I'm not the type to switch devices after every new released and perfer to hang to something until I feel it's not doing what I ask it to (still have HTC Uni, 8525, Treo 750 and Axim x51v).
This and the 30 fps capped is my only main concern about this phone, especially this screen separation (more light leakage or dust problem). The rest of the problem doesn't really bother me much such as the laggy touch input, improperly grounded screen and other problem doesn't apply to my device.
Is it worth the hassel of exchanging it hoping to get one without the screen separation or do they all have this problem? I'm hoping the newer hardware version (version 3) doesn't have this sort of problem, mine is hardware version 2. What you guys think?

I have been noticing more and more light leaking. I thought at first I was maybe just getting paranoid (still possible) but I saw a line about 1.5 cm long along the lower left side last night... That was definitely not there before.
What should I do? Would getting the TEP plan be prudent at this point, to cover this issue if/when it gets worse? Or would be the kind of thing HTC would be more... lenient about replacements?

Think the hairdryer method will work like it did on the Nexus? My nexus had this issue and the hairdryer method fixed it up permanently.

booloobunny said:
Think the hairdryer method will work like it did on the Nexus? My nexus had this issue and the hairdryer method fixed it up permanently.
Click to expand...
Click to collapse
Doesn't hurt to try. If it worked on the NX-1, it might work again

redrazr7791 said:
Wow this is totally sh*tty
I just placed my order for the Evo and should be receiving it sometime this week.
I am wondering if maybe keeping the phone in a tight-fitting silicone case might help to reduce any possible "DISPLACEMENT" of the screen
Click to expand...
Click to collapse
I know this is off topic but...
How are you getting yours that fast? Where did you order from

booloobunny said:
Think the hairdryer method will work like it did on the Nexus? My nexus had this issue and the hairdryer method fixed it up permanently.
Click to expand...
Click to collapse
Yeah I actually just tried this and it worked pretty well only a little of leakage left, I figure I'll seal it up some more when I have the time and Im pretty sure I did not hold it down long enough to let it cool effectively. but the parts that are still down work like a charm. way better than having to go back, lose all your apps, headaches of customer service, etc.

BigBallin said:
Dust under the screen. And you can see light leaking out of the bottom of the phone
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
--------------
So this is the reason I see light under the buttons when their off and the screen is off, and its dark in the room? because my screen seems to be holding up well, and I have it in my pocket all day, no case or screen protectors. then again, I haven't been messing with it, trying to apply things or mods to it.

Hair dryer, bubble gum, tape and what else?! These are high-end devices (Evo Nexus One, etc) and they should NOT need a MacGyver handbook to keep them together after days of ownership. HTC needs to do right by us from the design stage period!

Dear Babies,
This is a site about hacking phones. Stop *****ing and use your brains for a change. Get some black silicon caulk from Lowes. Rub a small small amount in the crack where the buttons meet the case where the light leaks. Congratulations, your phone can now be left in the desert for 10 years and nothing will get through that seam including light... I swear, you guys can spend all day rooting phones but cant use some damn common sense to fix the hardware itself. I had tons of light leakage when i got the phone. Zero now, and you cant tell i did anything to it.

AshMa said:
HTC needs to do right by us from the design stage period!
Click to expand...
Click to collapse
This is very true, but there seems to be a gray area when it comes to (S*** HAPPENS and a bug that can be fixed)... And it seems to get grayer everyday.....

hair dryer seems to have worked fine on my evo

FingerPrint/Power button

My fingerprint/power button is slightly slanted. I was wondering if this is just me or not. The button is lifted slightly from one end.

i.mac said:
My fingerprint/power button is slightly slanted. I was wondering if this is just me or not. The button is lifted slightly from one end.
Click to expand...
Click to collapse
There's a data ribbon on one side that holds it crooked like that. this has already been brought up and pretty much all of them are like that (as far as I know) so I wouldn't be concerned about it.

live4nyy said:
There's a data ribbon on one side that holds it crooked like that. this has already been brought up and pretty much all of them are like that (as far as I know) so I wouldn't be concerned about it.
Click to expand...
Click to collapse
You've been a real relief today. Thank you.

This is the first thing I noticed after taking it out of the box. Couldn't believe they wanted it to be like this.
Sent from my MB860 using XDA App

Crooked here as well. The first atrix I had seemed to be straight though. Kind of annoying. Also one side of the screen is slightly lower than the other.

eallan said:
Crooked here as well. The first atrix I had seemed to be straight though. Kind of annoying. Also one side of the screen is slightly lower than the other.
Click to expand...
Click to collapse
Same for me. I had to return my first atrix because of battery issues and it had a straight one but the one I have now is tilted. I don't really stare at it so no big deal to me. At least my battery is performing now.
Sent from my MB860 using XDA App

To add to the build quality issues, I went through 3 units at the store an all had some degree of dust under the screen. I took the one with the least. I took a look at my cousin's unit the other day and it also had a couple of specs under the screen.

BBock9 said:
Same for me. I had to return my first atrix because of battery issues and it had a straight one but the one I have now is tilted. I don't really stare at it so no big deal to me. At least my battery is performing now.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Define performing. Mine is still garbage compared to what it should be. That's the same reason I returned the first one.

http://forum.xda-developers.com/showthread.php?t=989042
Sent from my MB860 using XDA App

okay at least im not the only one. a friend of mine thought it was a protective piece of plastic that needed to be peeled off at first. it looked too thick to be something like that so i tested it first to see if it would read my finger which it did so i left it on..
odd that motorola would place it like that

it is an inset reader attached to the board with a ribbon cable, as part of a button. Some sit slightly different than others, it is common on everything that has this type of multifunction setup.
get your OCD under control

digitalallstar said:
To add to the build quality issues, I went through 3 units at the store an all had some degree of dust under the screen. I took the one with the least. I took a look at my cousin's unit the other day and it also had a couple of specs under the screen.
Click to expand...
Click to collapse
id say its less a build quality issue and more a design issue, since the glass isnt glued to the screen. I have myself seen 3-4 atrix, all except one had either major dust or at least 1-2 specks.
and on top a software bug that scared the hell out of me, seeing dead and stuck pixels only in the CAMCORDER mode.

I should consider myself lucky then, no dust and my fingerprint/power button is straight. However, it is a refurbished phone (perhaps one that was returned by one of you!) so they might have taken a bit more care in reassembly. Who knows... Maybe it is best to buy second hand sometimes, or I'm just plain lucky

brendan_orr said:
I should consider myself lucky then, no dust and my fingerprint/power button is straight. However, it is a refurbished phone (perhaps one that was returned by one of you!) so they might have taken a bit more care in reassembly. Who knows... Maybe it is best to buy second hand sometimes, or I'm just plain lucky
Click to expand...
Click to collapse
I have had four refurb atrixs and each one has had a straight fingerprint scanner. All of them at the stores I have seen are slanted. Seems the refurbs are a little nicer in that aspect
Sent from my MB860 using XDA App

Same here ... a little slanted, but then again I hadn't really spent much time looking at the button before!

i never liked the button!!

Back Camera not centered ?

Is this normal ?
Is there anyone there with same issue ?
Should I replaced it back ?

sectorlord said:
Is this normal ?
Is there anyone there with same issue ?
Should I replaced it back ?
Click to expand...
Click to collapse
Explain

The iris (inner most center) is not in the with the outer circle.

Mine is the same way, I'm not real worried about it. Seems to take pictures well.

Geez... it bothering me..

Holy crap, I didn't notice it until you said something! Now I want to throw my phone away. J/K about the throwing away part, but I really didn't notice that until you started this thread.
They probably couldn't fit the camera module perfectly centered on the main board but figured they could fudge it by centering the housing without too many noticing. Little did they know you'd be buying one! (Ha ha, J/K again...)

haha... coz my S2 is perfectly centered...
Need to buy another one... or spend the money to cure my OCD...hahah

If the pictures you take look good and not off-center, I guess you shouldn't worry about it.

No, it is towards the right side of the circle. It is not centered with the outer circle. I believe this is part of their design (perhaps some technical reason too)

Mine is also more on the right side...?
Any thoughts WHY they do it technically ?
Thanks

Guys, not to worry, this is just a minor parallax viewing problem.
Center your eyes, you should see the camera lens centered now..

I was looking at a demonstration Note on display yesterday, and I thought the lens didn't look quite right. Now I know.
It took fabulous photos though!

is this a joke thread. mine is exact center.
Sent from my GT-N7000 using XDA App

you're not looking hard... I checked 3 units today but all of them have varying off ctr..from .1mm at the best...
so I cant replace mine since all of them are same

mine is centered (lens).
the outer part is not, in fact, it's not even secured as it moves around but never actually blocking the lens, so the camera works fine.

Looking at other camera...Galaxy Tabs etc.. most of them are not exactly centered..
I dont know why I making so much puss on this...hehehe
Really need to fix my OCD..

Mine is centred to the right. Damn, it's going in the bin now!!
Sent from my GT-N7000 using xda premium

Just returned my Note with another one... after looking at least 3 notes
I now have a perfectly centered camera...hehehe

G3 Build quality thread

I've had my G3 for about a week now and I absolutely love the device. I'd like to have a discussion about build quality of the device since there's some things I've noticed with my 32gb D855 model that I'm wondering if others have had also.
1) The digitizer is quite noticeable, I guess my eyes have adjusted a bit now but it is there and quite noticeable when I pay attention
2) The back plate is screaming poor quality: it is very creaky near the top above the infrared and also around the volume down key you can really press the device and hear it creaking like a Samsung device
3) Unfortunately after caring for it with my life somehow the back cover got a huge scratch..I don't possibly know from what..a fleck of dust in the air or Something but still this shouldn't have gotten such an ugly huge scratch so easily!
4) Dust/sand or dirt is easily getting into the bezels right where the screen ends
5) As mentioned in another thread I've had the spontaneous shut down but let's not delve into that on this thread
Anyone else want to share their experiences?
Sent from my LG-D855 using XDA Premium 4 mobile app

I think the device feels wonderful when im using it. But I do agree that one drop and this thing is gonna be in trouble.

I managed to put a 2inch scratch on the back and I'm so carefull but managed to scratch it.

ladelfm said:
I've had my G3 for about a week now and I absolutely love the device. I'd like to have a discussion about build quality of the device since there's some things I've noticed with my 32gb D855 model that I'm wondering if others have had also.
1) The digitizer is quite noticeable, I guess my eyes have adjusted a bit now but it is there and quite noticeable when I pay attention
2) The back plate is screaming poor quality: it is very creaky near the top above the infrared and also around the volume down key you can really press the device and hear it creaking like a Samsung device
3) Unfortunately after caring for it with my life somehow the back cover got a huge scratch..I don't possibly know from what..a fleck of dust in the air or Something but still this shouldn't have gotten such an ugly huge scratch so easily!
4) Dust/sand or dirt is easily getting into the bezels right where the screen ends
5) As mentioned in another thread I've had the spontaneous shut down but let's not delve into that on this thread
Anyone else want to share their experiences?
Sent from my LG-D855 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Just got mine yesterday but #2 is not an issue for me. The back is very solid and doesn't have any flex at all. I am going to put a slim case on mine though and I already have a tempered glass screen shield.

Well, mine seems pretty solid so far (got mine on Monday), the only thing from your list i noticed as well is the dust at the bezel, but it's not really in the bezel, it's just sticking at the edges, because the bezel is slightly higher than the screen, that's a bit annoying, but not really bad, because it can be easily swiped away. Except of that, I'm pretty pleased with the build quality so far, looks and feels premium, just the back doesn't feel that slick, because of the plastic, but it's still not bad at all.
Oh, and the back buttons are slightly too hard to push, but that's also not a big deal.
So, great device, I'm a happy owner^^
Gesendet von meinem LG-D855 mit Tapatalk

ladelfm said:
I've had my G3 for about a week now and I absolutely love the device. I'd like to have a discussion about build quality of the device since there's some things I've noticed with my 32gb D855 model that I'm wondering if others have had also.
1) The digitizer is quite noticeable, I guess my eyes have adjusted a bit now but it is there and quite noticeable when I pay attention
2) The back plate is screaming poor quality: it is very creaky near the top above the infrared and also around the volume down key you can really press the device and hear it creaking like a Samsung device
3) Unfortunately after caring for it with my life somehow the back cover got a huge scratch..I don't possibly know from what..a fleck of dust in the air or Something but still this shouldn't have gotten such an ugly huge scratch so easily!
4) Dust/sand or dirt is easily getting into the bezels right where the screen ends
5) As mentioned in another thread I've had the spontaneous shut down but let's not delve into that on this thread
Anyone else want to share their experiences?
Sent from my LG-D855 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Do we have the same device?
1: I can barely see the digitizer unless i shine a bright light into the screen.
2: the back cover on mine fits perfectly, to the millimeter. The only creaking i hear is if i try to twist the device at either end which is acceptable as its a removable cover so should have some give.
3: that is unfortunate
4: Is this not normal of all phones. They all have a small gap between the glass and phone body. its hard to avoid, but not very big on the G3.
5: ive not had this issue fortunately.
Ive found the build quality to be very good. everything fits very nicely. and its a big step up in quality from the nexus 5 which already had a decent build quality.

Had mine for 6 days, comparing this to say an s4 or s5 is like comparing a Citroen 2CV against a Ferrari, the difference is immense in terms of both looks,build quality and feel. Loving it ?

Just got mine an hour ago. I'm coming from an S4. This phone feels cheap in comparison. I'm not sure if I'll get used to not having the true black that one gets with an AMOLED screen. But hey, it's only been an hour.:beer:
Sent from my LG-D851 using XDA Free mobile app

I've had mine for nearly 2 weeks and it's been great. Got a slim case and applied the screen protector it came with it. No complaints here!

rjscott2005 said:
Just got mine an hour ago. I'm coming from an S4. This phone feels cheap in comparison. I'm not sure if I'll get used to not having the true black that one gets with an AMOLED screen. But hey, it's only been an hour.:beer:
Sent from my LG-D851 using XDA Free mobile app
Click to expand...
Click to collapse
It really is a big difference between AMOLED and IPS screens. There completely different technologies, keep in mind though the IPS screen is more closer to every other screen you look at every day so its not like you dont use them already.

Im not liking how the G3 is get bashed around recently, if your not happy with it then i suggest people go back to samsung. Ive had it over a week now and the phone grows on me more every day. Once roms and tweeks come out this phone will be even more amazing

ant78 said:
Im not liking how the G3 is get bashed around recently, if your not happy with it then i suggest people go back to samsung. Ive had it over a week now and the phone grows on me more every day. Once roms and tweeks come out this phone will be even more amazing
Click to expand...
Click to collapse
Is not bashing if its true. If you like the device then good for you.
Anyways the phone I had came with scratches on the back. The back seems incredibly easy to scratch.

Lostatsea23 said:
Anyways the phone I had came with scratches on the back. The back seems incredibly easy to scratch.
Click to expand...
Click to collapse
Get it replaced.

Dubhar said:
Get it replaced.
Click to expand...
Click to collapse
Can't. Imported it.

Dubhar said:
It really is a big difference between AMOLED and IPS screens. There completely different technologies, keep in mind though the IPS screen is more closer to every other screen you look at every day so its not like you dont use them already.
Click to expand...
Click to collapse
So far I like it.
Sent from my LG-D851 using XDA Free mobile app

Lostatsea23 said:
Can't. Imported it.
Click to expand...
Click to collapse
ah I see have you had any more scratches? Mines been in a case so ive no idea how easily it wil scratch. All my phones have scratched though.

Dubhar said:
ah I see have you had any more scratches? Mines been in a case so ive no idea how easily it wil scratch. All my phones have scratched though.
Click to expand...
Click to collapse
Yes even my case scratched it. Idk how it got scratched so easily !

rjscott2005 said:
Just got mine an hour ago. I'm coming from an S4. This phone feels cheap in comparison. I'm not sure if I'll get used to not having the true black that one gets with an AMOLED screen. But hey, it's only been an hour.[emoji481]
Sent from my LG-D851 using XDA Free mobile app
Click to expand...
Click to collapse
Samsung uses ultra high metal grade plastics.

americasteam said:
Samsung uses ultra high metal grade plastics.
Click to expand...
Click to collapse
Touche :thumbup:
Sent from my LG-D851 using XDA Free mobile app

americasteam said:
Samsung uses ultra high metal grade plastics.
Click to expand...
Click to collapse
Is that sarcasm? Lol