Related
I had my nexus side by side with a Droid last night. And I noticed that when the AMOLED screen on the nexus dims down. it gets REALLY red and distorts the contrast/colors alot.
Is this normal? When my brightness is at a normal setting it looks great. its only when it gets dim. Im a little concerned.
its fine, thats just how AMOLED displays work.
I can't agree that it's fine ... if colour infidelity is part and parcel of AMOLED then maybe HTC should reconsider their use of it. I notice the red tint at all brightness levels but it's most noticeable at the lowest level.
I always have the brightness at 0% and automatic to off when not plugged in. Don't see any severe redness.
well, I guess it's not normal , I got my frist one with dead pixel but the color is bright so I did a refund as they recomended and buy a second one but this one came with redish screen..... I did the comparison and the one with the dead pix is a lot more brighter , so my luck sucks
This is my second nexus, both have pinkish hue when on lowest brightness
I haven't noticed any red/pink issues at any brightness with my phone, but I haven't done any side-by-side comparisons.
Call HTC support and see if this is a known problem they fix or if it is just part of a normal working Nexus One.
It's a part of a normal Nexus One. My friend had the red / pinkish hue on his screen and called HTC for a replacement. Once the replacement came, it was exactly the same hue. But with 50% brightness, it isn't noticeable. However, I'm probably the lucky one because I don't experience the 'problem' with 0% brightness on my Nexus.
Some nexus one don't have the red tint, I got 2 nexus one and one have the other doesn't show any red tint even at lowest brightness. I guess its just difference screen from difference suppliers.
This is my second nexus, both have pinkish hue when on lowest brightness
Click to expand...
Click to collapse
I agree with this completely.
I just got an Epic.
Reading several threads across the Galaxy line, there is apparently a variation in screen color temperatures. From my readings, I see a pattern where perhaps the newer/replacement units have yellower screens. At the same time, those newer units also get darker in auto brightness mode than the older units.
From my own observation, the color temp gets cooler as the brightness increases.
Is it possible that Samsung tweaked the auto brightness so that the phone now gets darker in order to save the battery? So perhaps the different color temp observed are a function of how bright the screen is?
I don't care for the yellowish screen on my new Epic. I like a cooler/colder screen. Comparing the Epic next to my LCD Evo and Touch Pro 2, it is outright yellow. Comparing the 3 phones next to my Nexus One, the N1's screen looks pink. (I can post some pics tomorrow).
Bottom line, I'm trying to decide if I should try to return/exchange the phone for another and hope for the best. I read that there are some potential software solutions out of XDA, but I prefer to have a phone that is natively "cold".
Any input would be great.
Thanks.
Mine's pretty yellow. :-( In brighter light, it is not a problem. Darker screen is the result of a software update. Got mine on launch day.
Sent from my SPH-D700 using XDA App
APOLAUF said:
Mine's pretty yellow. :-( In brighter light, it is not a problem. Darker screen is the result of a software update. Got mine on launch day.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Thanks for the information. Before the software update, when the screen didn't get as dark, did it appear less yellow at the [pre-update] low brightness?
In other words, does the screen now look more yellow than ever since the update and darker screen?
Cheers.
I got my Epic on Oct 1st, and I haven't noticed this yellowish at all, but maybe I need to do a thorough side by side with an older model?
Did you get any pics to post up yet? I'm interested to see this
Edit: Sorry, just saw you said you can't post pics until tomorrow.
snovvman said:
Thanks for the information. Before the software update, when the screen didn't get as dark, did it appear less yellow at the [pre-update] low brightness?
In other words, does the screen now look more yellow than ever since the update and darker screen?
Cheers.
Click to expand...
Click to collapse
Just as yellow as always. Post-update, the screen dims more. At this point, it appears yellower. My Captivate also now dims more, post-update, and seems bluer at dimmest setting.
Sent from my SPH-D700 using XDA App
The only time I've had problems with my screen was when my phone had gotten damage from water. I'm on my 2nd epic and this one doesn't have any yellowish tints. Only about a week old now.
Sent from my SPH-D700 using XDA App
I picked up my Epic on 9/29 and don't see any yellow tint at all. I'm not an expert here but I think I would notice a tint like that. My blacks are very clear and dark also. I did notice that it seemed to run on auto brightness a little darker than it had...that was probably the D-118 update after I had it for only a few days.
I will follow this thread and see where it goes.
I don't think the screen color variation is based on release date. I have two of them since 8/30. One of them has a yellowish tint compared to the other. They both have the same DI18 update.
It seems like a coin-toss what screen color comes. I wish we have a tool that would allow easy color temperature adjustment.
I read a thread about a way using a modified kernel, but it would be nice to have an .apk that works (even if it requires root).
I got one on launch day that had more of a blue tint to it. I got another one last week that was a refurb, and it definitely is more yellow.
Weird. I just got mine today and it's very cool (read: blue) compared to my Evo... being a photo guy, this drives me nuts. I prefer warmer diplays.
Sent from my SPH-D700 using XDA App
I have one of the cooler screens, and I kinda like it.
My thoughts:
1) Samsung is trying to extend the life of the blue oLEDs by altering the color temperature of screens. Since this seems to be happening independently of ROM version, it's probably something they're doing with firmware.
2) (IMO More Likely) The screens on different phones came from different assembly lines or different production runs, and have a slight variance in color production. The production date of the phone wouldn't necessarily matter in this case.
The only project I know that deals with the color temperature of the screen is voodoo:
http://project-voodoo.org/color
I currently have it running on my ROM. It adds a new "very low" brightness setting a the bottom that's much dimmer than even the lowest one available in DI18. (Note: it doesn't interpolate levels between them, either. Meaning there is a big jump in brightness from the voodoo lowest level to the DI18 lowest level, which is the next "notch" up on the slider.) It also adds a brightness level at the very highest brightness, which noticeably makes the display warmer. (The highest and next-to-highest brightness notches are the same brightness, the difference being the highest one is warmer.) At this point of its development, it's really of no use if you want to make your screen warmer at all brightness levels.
At any rate, the project leads me to believe that, with further development, we could have an app that allows us to freely change all the color settings for the display for all brightness levels, save them to profiles, etc.
The idea of the screen getting warmer as you decrease its brightness might be a natural phenomena, or just perceptual. In my experience, colors usually seem warmer as you decrease the intensity of the light. This is even true of light on a physical object.
My screen looks awesome. No yellowing or anything. I wonder if there is a difference based on who made the screen for that particular Galaxy S phone? I remember reading an article when all the Galaxy S phones started rolling out saying that Samsung was having trouble with the manufacturing of the AMOLED screens. Perhaps they started cutting corners.
However, there also seems to be issues with auto-brightness, etc...I have that disabled on my phone and the brightness set on its lowest setting (which is plenty bright for me and all my viewing needs) which may be the difference? But, I have cranked it up from time to time just to show others and I still don't notice any yellowing.
Is there a specific test image or something where one could view that would show/exaggerate the effect people are talking about? I would be curious to see...
Thanks for the great input and information.
Here is something interesting for the Nexus One screen.
http://forum.xda-developers.com/showthread.php?t=745248
Never noticed any of the sort.
Forgive My Brevity. To Be Or Not To Be...
I havent noticed it either. Had mine since day one
Sent from my SPH-D700 using XDA App
http://forum.xda-developers.com/showthread.php?t=745248
Should help in this case once Froyo arrives
Here is a quick picture taken by a Touch Pro 1. Sorry about the quality. I can try to take better ones if there is interest.
From left to right - Evo, Epic, Nexus 1, Touch Pro 2. All with auto-brightness on.
In real life:
The Evo looks whiter (cooler)
The Epic looks much yellower (warmer, almost greenish)
The N1 doesn't look as pink as it appears, but looks the darkest
The Touch Pro 2 looks the whitest (coolest)
To my eyes, the Evo/Touch Pro 2 looks good. Although the picture shows the Epic looking pleasant and only slightly warmer, the white elements (clouds in wallpaper, browser backgrounds etc.) look yellow/green.
Edit: Notice the Menu, Home, Back, Search menu LEDs look whiter than the screen. See the contrast between the two makes the screen look yellower.
I've owned 3 Epics since launch day. First one had a good screen, 2nd one had a yellow tint, 3rd was perfect.
The build dates of the first 2 were 10.08 and my current one is 10.09.
arashed31 said:
I've owned 3 Epics since launch day. First one had a good screen, 2nd one had a yellow tint, 3rd was perfect.
The build dates of the first 2 were 10.08 and my current one is 10.09.
Click to expand...
Click to collapse
By perfect, do you mean that it is not yellowish? It's interesting that the first two phones with the same build date has two different color screens...
The Epic I have has a 10.10 build date. It's yellow at dimmed levels and color temp gets cooler as it brightens up.
Do you have the well described light bleed on the bottom of your screen (7 brighter spots) at low brightness?
Whether you do or do not I am curious to know what your serial number date is.
I.e. are the 1st 3 digits 311 or 312.....
Someone suggested this was fixed on newer batches of these tablets and am curious if the newer serial numbers are showing the same issue.
311, got bleed. Don't care tho.
- For science!
Canadoc said:
Do you have the well described light bleed on the bottom of your screen (7 brighter spots) at low brightness?
Whether you do or do not I am curious to know what your serial number date is.
I.e. are the 1st 3 digits 311 or 312.....
Someone suggested this was fixed on newer batches of these tablets and am curious if the newer serial numbers are showing the same issue.
Click to expand...
Click to collapse
Yes but only with a white background at that edge and when the tablet is at less than 20% brightness. If it is a darker background or the tablet is above 20% brightness I have no bleed that I can see. In fact, I never noticed it in regular use until I looked for it in order to reply to your thread. So obviously it does not bother me. SN 311.
Stujoe said:
Yes but only with a white background at that edge and when the tablet is at less than 20% brightness. If it is a darker background or the tablet is above 20% brightness I have no bleed that I can see. In fact, I never noticed it in regular use until I looked for it in order to reply to your thread. So obviously it does not bother me. SN 311.
Click to expand...
Click to collapse
Thanks. My purpose is not to get people bothered. I am more thing to establish 2 things. First that unlike light bleed which is random this its a near universallyrics described flaw out limitation of this device and going and returning it for am exchange is likely fruitless. Keep it if you like it or move on. I have chosen to keep mine.
Secondly to seeif there is a pattern to those that claim not you'll have this issue. One person in another post started his first twist had it but the replacement with a newer serial number did not.
Sent from my LG-V500 using Tapatalk 4
Stujoe said:
Yes but only with a white background at that edge and when the tablet is at less than 20% brightness. If it is a darker background or the tablet is above 20% brightness I have no bleed that I can see. In fact, I never noticed it in regular use until I looked for it in order to reply to your thread. So obviously it does not bother me. SN 311.
Click to expand...
Click to collapse
Part of the reason I never noticed it is that I have my on-screen buttons as black so any bleed would never be visible for me in portrait mode. Also, the only time I ever have my brightness that low is at night when reading my kindle app in bed and I use the white text on black background for that so bleed would also never show up in that situation.
Sent from my LG-V500 using xda app-developers app
Stujoe said:
Part of the reason I never noticed it is that I have my on-screen buttons as black so any bleed would never be visible for me in portrait mode. Also, the only time I ever have my brightness that low is at night when reading my kindle app in bed and I use the white text on black background for that so bleed would also never show up in that situation.
Sent from my LG-V500 using xda app-developers app
Click to expand...
Click to collapse
Similar situating though sometimes might surf or watch a video in bed at low brightness and then was surprised to see it
Sent from my SM-N900W8 using Tapatalk
309 Here and yes I have the bleed but it doesn't bother me because most of the time my black nav buttons are there. Only really noticeable when you have only white.
The only bleed I have is when when brightness is jacked up and the background is dark. It goes a bit lighter in the corner but no worse than my nexus 7.
Sent from my LG-V500 using xda app-developers app
LeighR said:
The only bleed I have is when when brightness is jacked up and the background is dark. It goes a bit lighter in the corner but no worse than my nexus 7.
Sent from my LG-V500 using xda app-developers app
Click to expand...
Click to collapse
That is traditional light bleed. Please state what serial number you have
Sent from my SM-N900W8 using Tapatalk
So minor i can barely see when trying in a dark room with any brightness. Less light bleed or inconformaty than any other tab i have owned.
I have a black 309 from best buy.
Canadoc said:
That is traditional light bleed. Please state what serial number you have
Sent from my SM-N900W8 using Tapatalk
Click to expand...
Click to collapse
S/N: 311CQSF
Sent from my LG-V500 using xda app-developers app
gottahavit said:
So minor i can barely see when trying in a dark room with any brightness. Less light bleed or inconformaty than any other tab i have owned.
I have a black 309 from best buy.
Click to expand...
Click to collapse
So what this means, is that the lack of the light bleed at the bottom of the screen that so many of us have is not necessarily related to do the month of manufacture. Somebody had suggested that models with serial 312 and higher were made sense that have not exhibited the same problem.
One thing I have noticed, is that I can lower the brightness on this tablet to a much lower level than any other smartphone or tablet. It is possible that is why we see those 7 lights at the bottom. It probably has to do with the fact that the overall screen brightness is so low that they become visible. Ordinarily on a different tablet it probably doesn't reach brightness level that low where more artifacts in the screen becomes viewable
Sent from my LG-V500 using Tapatalk 4
Canadoc said:
So what this means, is that the lack of the light bleed at the bottom of the screen that so many of us have is not necessarily related to do the month of manufacture. Somebody had suggested that models with serial 312 and higher were made sense that have not exhibited the same problem.
One thing I have noticed, is that I can lower the brightness on this tablet to a much lower level than any other smartphone or tablet. It is possible that is why we see those 7 lights at the bottom. It probably has to do with the fact that the overall screen brightness is so low that they become visible. Ordinarily on a different tablet it probably doesn't reach brightness level that low where more artifacts in the screen becomes viewable
Sent from my LG-V500 using Tapatalk 4
Click to expand...
Click to collapse
This is a great thread and to tell you the truth if you havent began this one i would very soon began one similar. Here is my observations:
My first one was with 7 bright lights on the bottom vissible on white screen(do you tests with an apk thats free from Google playstore called "Backlight bleed apk", its free) from a 35% brightness and lower. It was annoying and second,much more important,for the money i gave to LG i want the product to be of high quality and tested by their technicians very thoughtfully before launching it. So i return it as a DOA. The second one had no 7 bright spots on the bottom but it had a yellow line on the top(under the Lg sign) that was very obvious with a white background (from 60% brightness and up). This one went also back as a DOA. The third one has again 7 bright spots on the bottom but its noticeable with 20% and below. All 3 devices are 311. Its quite a shame that this device with such good specs has such bad screen problems. I thing LG had a wonderfull idea with this tab but hurried to get it to the market.
Does someone with 312 have simmilar problems?
Sent from my Thrive using Tapatalk
Does anyone here with the lightbleed problem also have a problem with the screen seeming loose? When I push on my screen I can hear some creaking.
kdog350 said:
Does anyone here with the lightbleed problem also have a problem with the screen seeming loose? When I push on my screen I can hear some creaking.
Click to expand...
Click to collapse
Ingesting and unrelated.
Here are my chronicles:
1st G pad: white 310 serial. Had both regular and 7 light bleed. Had not readabout this issue before returned it.
2nd G pad: Black don't recall serial. Good build quality no light bleed but 7 light issue. Now aware this is a common problem. Decide to exchange and go to best buy inspect 2 others (sales person let me setup 3 tablets and look best I could for issues. All 3 had the 7 light thing so figured this must just be a characteristic of the lcd they use in this tablet. So took home
3rd Gpad white w 11 build which in store I thought was better than the 2nd for the 7 light issue.
For Home was wrong and based on what I have read and my assessment I was resigned to the fact that they would all be this way and was going to keep. At this point I stated this thread after reading about some people who did not have this issue, one of them having a December or 312 build which I have been unable to find anywhere.
The build quality was bad in this replacement however. The edges of the tablet were sharp with a seam the others didn't have. Less than 1 day later the bottom right of the tablet must have been lose as depending on how I gripped it, it would creak and pop as if the plastic was coming off and snapping back.
At this point I decided I would return as a defect and got
G pad 4: white 310 build.
Was similar to second tab in buildwith almost no light bleed but had the 7 light issueand also felt the lower right part of screen at edge of bezel felt it had some give. I am now fed up and neuroticabout all this add I am in vacation in the USA and we don't yet have these in Canada.
Wanted to settle it. Found one other best but that head in store stock and it was rainy so I said last try to get at least one with only the 7 light issue.
Picked up a black one. 310 serial.
Took it home knowing that I'd it was no good I would say screw it and get ipad mini.
This one is nearly perfect.
Even at 0 the 7 lights are almost invisible. I have to look for them as I know they should be there. There is just a bit of traditional light bleed visible at 100% brightness in a dark room and in dark room I am rarely above 40%. Build quality is great and screen doesn't have any significant yellow cast.
I love it!!!!
From all my craziness I have discovered a few things that might explain the issues with this tablet.
1) 7light issue is there in every tablet. It is the way the lcd back lights work. The reason I and others likely have a tablet that doesn't exhibit it is due to something else. Brightness of the screen. By this I mean that all the tablets that have the 7 light issue can be dimmed incredibly low at the 0 setting.
Much lower than an ipad other tablet or my Samsung note 3.
My best screen seems noticeably brighter at lowest brightness. When reading an ebook at lowest brightness with white wiring on Black background the text is brighter in this one. So it could be that my 0 brightness calibration of the screen is closer to a 20 on one of the screens exhibiting the 7 light issue.
2) White tablet shows fewer finer prints if that is an issue but the metal black back is sweet!
3)With the voice Siri like app you can have option to enable or disable it listening for a hot word to activate it. With mine turned off my standby battery life is great even with 3 email accounts (1a push exchange account) going. We are taking 1% every 4-6 hours. This is much better than every tablet I have hadand my phone. This in spite of wifi on during sleep.
4) In spite of my issues of which in retrospect I would have been fine with my first 2 tablets and my current one I love this tablet.
It is a much better size than the lost nexus 7 2013 it replaced. Having expandable storage Ada much needed versatility. It does not win in any one category like an ipad or Nexus might but it hits all my desires from stereo speakersto God look to nice screen to great ergonomics.
Sent from my SM-N900W8 using Tapatalk
311, have the light bleed. thought of exchanging it because it somewhat bothers me when I'm web surfing at night in landscape, but I figured out it doesn't worth the effort becuae probably most of the other slates have this problem too. I was right.
I think we should all be a little bit less perfectionists about our tablet, and give more thought to the good things at the tablet + focus on more important issues in our lives (At least I know I should )
I would like to buy G Pad but before ordering it in online store (Poland) I sent them a message asking for checking some G Pads randomly. The result is shocking: first 10 G Pads have light bleed at the bottom of the screen. After that they decided to check all tablets in stock. It turned out that all of them (> 50) have light bleed at the bottom of the screen. Product manager told me that they will contact with distributor of LG in Poland requesting clarification on that issue and they want to return all G Pads and replace them with good ones.
Will let you know how things will go on.
radekzaj said:
I would like to buy G Pad but before ordering it in online store (Poland) I sent them a message asking for checking some G Pads randomly. The result is shocking: first 10 G Pads have light bleed at the bottom of the screen. After that they decided to check all tablets in stock. It turned out that all of them (> 50) have light bleed at the bottom of the screen. Product manager told me that they will contact with distributor of LG in Poland requesting clarification on that issue and they want to return all G Pads and replace them with good ones.
Will let you know how things will go on.
Click to expand...
Click to collapse
I have stud I think this is less a defect and more a characteristic of this screen technology. Based on the unit I now which does not have it I can say that mine does not get as dim at 0 percent brightness. Could be like with all LCD tech that below a certain brightness things like this are visible. It is a trade off in that you are getting a screen that can go dimmer but with those lights visible.
Sent from my LG-V500 using Tapatalk
I'm on S/N 311 and I got no bleed at the bottom, but at higher brightness I got a pretty serious bleed at the top left corner, that's left of the LG Logo. I don't notice it normally but when I use the tablet in landscape that spot is covered by the black software key bar, making it stand somewhat out. I'm not gonna get it replaced, I played that game with my SGS-II back in 2011, you ARE going to find something else on the new unit cause you'll have gone in nitpicky mode.
Besides at this price, which is one third of what I paid for my Note 3 on launch day, you can allow a tiny few beauty marks.
Exchanged a black gpad because of a 0.5 inch yellow line at the top of the screen. Don't know the serial number unfortunately.
Got a 312 now as replacement. This has the light bleed at the bottom as well. But I have not seen any of the other issues like the blue line or the issue above. The bleed is noticable, but I might keep it anyway because most of the time i use it in portrait at high brightness....
Okay so I bought a new Moto X (2014) last week In India. Everything about the phone is great. It was already on lollipop. But when I decrease the brightness to below 30-40% the display gradually becomes more and more purple. And with Adaptive Brightness on and in a dark room, it's so purple that the green and yellow shades appear grey or black. I know amoled panels have this problem at very low brightness and apparently many Nexys 6 users are also facing it. However I didn't see many complaints here in the Moto X forum.
So if you have this problem please vote in the poll above. Then I can ask them for a replacement. Thank you.
I'd later add some photos of the screen.
P.S. If you are experiencing this, please add some photos so that people can compare it with their displays.
ok i have this problem too, but when I'm in the bed and reading random news this purple display isn't disturbing me. i can feel it relax more my eyes. so i can say i take advantage from a bug
I don't think this is a bug, way easier on the eyes in the dark, perhaps some kind of a feature on AMOLED and Lollipop. The Nexus 6 has it, too, i think.
I don't know if anyone else noticed that in direct sun light, the screen goes extra bright - like indoor bright + boost?
This is not a feature. It's an issue with amoled displays. That's why Samsung limits the lowest brightness to a higher level. While Moto X seems to go way down. I just want to know if everyone's having this. Then it's okay. But if it's not everyone then there're some good amoled panels out there and we are getting the bad ones.
Yup, keep noticing this before the screen goes completely off.
It's not a "bug" with AMOLED displays, it's inherent to the way the displays work. Red LEDs use much less power than other colors so when the brightness is down low the displays looks like it has a slightly red tint to it. While Samsung does keep their best displays for themselves the lack of a red tint is not due to that but is instead due to not letting the brightness go as low on their displays.
raptir said:
It's not a "bug" with AMOLED displays, it's inherent to the way the displays work. Red LEDs use much less power than other colors so when the brightness is down low the displays looks like it has a slightly red tint to it. While Samsung does keep their best displays for themselves the lack of a red tint is not due to that but is instead due to not letting the brightness go as low on their displays.
Click to expand...
Click to collapse
That's what I meant. Not quite the best choice of word, I guess. But if that was the case, everyone should have had the pink tint at low brightness. Do you mean the ones who are not getting it are either lying or have Moto X's with LCD panels?
CosmoDroid said:
That's what I meant. Not quite the best choice of word, I guess. But if that was the case, everyone should have had the pink tint at low brightness. Do you mean the ones who are not getting it are either lying or have Moto X's with LCD panels?
Click to expand...
Click to collapse
Well, only 2 out of 11 people have reported no color distortion. And remember that while you're asking "Is there a purple tint?" they're answering the question "Have you noticed a purple tint?"
What I've noticed is that when Adaptive Brightness is on, the display gets super dark and causes the purple tint. When I turn Adaptive Brightness off in a dark room, it actually completely loses the purple tint, and compared to my Galaxy Tab S 8.4 at lowest brightness, the screen is brighter than the Tab S. So I guess Motorola hasn't caught up with Samsung's display technology since my Tab S can actually get dimmer without such a dramatic color distortion - for my Moto X to get to a brightness level that dim, I need to turn on Adaptive Brightness (thus with the purple tint).
.
I wouldn't say it gets a Purple tint but rather a reddish one with adaptive light.
And I LOVE it. This way I don't have to install Lumen.CF or any other stuff. Way easier on the eyes at night and it gets reeeeeeaally dark. Just perfect!
I also love that it naturally has a lower white temperature point than other lcd/phones screens. Warmer white is cozy white.
7 votes for without purple/red tint.
People who are not seeing the tint, can you please upload a side by side photo of "your phone at lowest brightness with the adjustment bar visible" and "a white paper".
CosmoDroid said:
7 votes for without purple/red tint.
People who are not seeing the tint, can you please upload a side by side photo of "your phone at lowest brightness with the adjustment bar visible" and "a white paper".
Click to expand...
Click to collapse
I voted for no color distortion as my display is very very good. I can tell you there is certainly a variation in displays. A few months back someone posted about being able to see color banding and such. Those of us with really good displays do not see that. I was going to order a Pure edition to replace my unlocked XT1097 but the display is so good on it I decided not to, I doubt another one will be as good. I had 5 different Moto X 2013 models and the displays varied on each of them as well. I kept the best one and my 2014 model is still quite a bit better then the best 2013 I had.
Steve-x said:
I voted for no color distortion as my display is very very good. I can tell you there is certainly a variation in displays. A few months back someone posted about being able to see color banding and such. Those of us with really good displays do not see that. I was going to order a Pure edition to replace my unlocked XT1097 but the display is so good on it I decided not to, I doubt another one will be as good. I had 5 different Moto X 2013 models and the displays varied on each of them as well. I kept the best one and my 2014 model is still quite a bit better then the best 2013 I had.
Click to expand...
Click to collapse
The rest of the phone in my case feels pretty solid and well built. Also I'm getting 47k+ scores on Antutu. Hence I am having second thoughts about getting it replaced.
My PE doesn't turn purple and has better whites than my AT&T branded one. The screen on that one is awful to me but I also use a G2, iPhone 6, '13 N7, no one notices but me.
Sent from my XT1095 Victara
After three replacements, I finally got a decent one. :laugh:
I'm pretty sure this is just a feature of the moto x2 go to Settings/Display and turn off adaptive brightness, you will see that it changes to normal
born1690 said:
I'm pretty sure this is just a feature of the moto x2 go to Settings/Display and turn off adaptive brightness, you will see that it changes to normal
Click to expand...
Click to collapse
Indeed, when adaptative brightness is turned off, purple tint will not occur. However, I am not sure this is a "feature". It actually looks more like a poor implementation of auto brightness.
CosmoDroid said:
Okay so I bought a new Moto X (2014) last week In India.
Click to expand...
Click to collapse
I use the CF Lumen app to turn down the red and green just a tad in the master mode. That makes my screen less pinkish.
I had the purple display issue in 5.0. Now I upgraded to 5.1 and the issue is gone. Colors are well balanced down to minimum available brightness.
rwallach said:
I had the purple display issue in 5.0. Now I upgraded to 5.1 and the issue is gone. Colors are well balanced down to minimum available brightness.
Click to expand...
Click to collapse
Running 5.0 having the same issue waiting for the update. Will report back thanks for this info I thought it's a amlod display issue, new to this display past few years was on lcd panel device's just got this device more than a week only now. But this is a great news. Thanks.
Hello,
I have a OP8P (prod. date 02.04.20, glacial green, 256GB) since 21.04.20. It has no uniformity or green tint issues. Using it at QHD+, 120Hz, auto brightness.
I was absolutely happy with the great display, it was a blessing sitting in direct sunlight with sunglasses and being able to read and view everything perfectly. Never had a phone with this peak brightness. Also I have never received any overheating warning after staying 2-3h in direct sunlight while reading and playing with the phone.
But now with 10.5.8 something changed:
The maximum brightness is reduced, this extra punch kicking in being in direct sunlight doesn't happen anymore. Sometimes even the slider doesn't go up to the maximum anymore. It's hard to ready anything. Also received the overheating message suddenly after a few minutes and the display goes dark.
I am wondering that nobody is talking about the brightness issues except some people in a german forum. (Unfortunately I am not able to create a post in the OnePlus forum yet and waiting for more than 24h that my post on reddit will be published by an admin).
To back up my issues I made some comparison shots in direct sunlight with an over two year old LG V30, where the OLED supposedly lost some brightness already and the phone never was a "brightness monster" to begin with. (Same german online magazine tested: V30: 410 nits, OP8P: 773-1187 nits.) To make it fair, I used a website half dark/half bright.
First picture: Almost the same brightness for me. Maybe V30 a little bit brighter.
Second picture: Fiddling around for two minutes with de- and reactivating the auto brightness and holding the phone at different angles to make sure the brightness sensor gets everything right (which was not necessary before the update), OP8P got a little bit brighter. But still very disappointing compared to a phone tested with a display half as bright.
And 4(!) minutes after taking the first picture, I got the overheating message and the phone went dark!
It was just lying on the table, no CPU load, no touching, nothing.
We have 20°C in Germany and it's still May.
What will happen in July or August with 35°C+...
Will the phone not be usable anymore outside at all?!
basti2910 said:
Hello,
I have a OP8P (prod. date 02.04.20, glacial green, 256GB) since 21.04.20. It has no uniformity or green tint issues. Using it at QHD+, 120Hz, auto brightness.
I was absolutely happy with the great display, it was a blessing sitting in direct sunlight with sunglasses and being able to read and view everything perfectly. Never had a phone with this peak brightness. Also I have never received any overheating warning after staying 2-3h in direct sunlight while reading and playing with the phone.
But now with 10.5.8 something changed:
The maximum brightness is reduced, this extra punch kicking in being in direct sunlight doesn't happen anymore. Sometimes even the slider doesn't go up to the maximum anymore. It's hard to ready anything. Also received the overheating message suddenly after a few minutes and the display goes dark.
I am wondering that nobody is talking about the brightness issues except some people in a german forum. (Unfortunately I am not able to create a post in the OnePlus forum yet and waiting for more than 24h that my post on reddit will be published by an admin).
To back up my issues I made some comparison shots in direct sunlight with an over two year old LG V30, where the OLED supposedly lost some brightness already and the phone never was a "brightness monster" to begin with. (Same german online magazine tested: V30: 410 nits, OP8P: 773-1187 nits.) To make it fair, I used a website half dark/half bright.
First picture: Almost the same brightness for me. Maybe V30 a little bit brighter.
Second picture: Fiddling around for two minutes with de- and reactivating the auto brightness and holding the phone at different angles to make sure the brightness sensor gets everything right (which was not necessary before the update), OP8P got a little bit brighter. But still very disappointing compared to a phone tested with a display half as bright.
And 4(!) minutes after taking the first picture, I got the overheating message and the phone went dark!
It was just lying on the table, no CPU load, no touching, nothing.
We have 20°C in Germany and it's still May.
What will happen in July or August with 35°C+...
Will the phone not be usable anymore outside at all?!
Click to expand...
Click to collapse
I have the same overheating issue's in the Netherlands. I think it is a design problem. Samsung S20 has the same issues as well.
I'm also noticing similar behaviour to yours; reduced brightness and overheating warnings.
Overheating mainly occurs when using the phone for navigation. All my other phones prior to this one have never overheated in this scenario.
I'm still hoping the phone will see improvements with future software updates. Probably delusional, but hey-ho.
Happens to me using Android Auto. I have to turn the Aircon blower on the phone to keep it cool.
Sent from my IN2023 using Tapatalk