Database Users

Bricked Zuk Z1

Hello,
Ok, here is the situation
I have a Zuk Z1 with last COS update 12.1 with locked bootloader, no root etc ... (I didn't touch anything).
Yesterday, it reboot by itself but I got bootloop (starting apps then again lenovo boot image ...)
I try to factory reset by using the recovery metohd, it's start normally (optimizing apps ...) but then reboot and again bootloop ...
So I try to sideload the official COS ROM from Cyanogen Support (cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip), but the sideload stuck at 47% and saying total xfer: 1.00x and the phone go back to recovery but still have boot loop ...
I try to boot in fastboot and use the All In One tool to flash official ROM but didn't work (Its say that the bootloader is lock)
I find without knowing this menu a debugging hardware tool test, and then I run the test, its say SD : Fail and in another I got SD : Fail and no sd fuse in dir
I saw many thread here and on google, and some say that we have to use qfil/qpst method, and find this which seems complete : http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
But as I don't know if its hardware issue or soft brick ...
Could someone help me to recover my phone to COS or CM by using the right method ?
Thank you !

wackou said:
Hello,
Ok, here is the situation
I have a Zuk Z1 with last COS update 12.1 with locked bootloader, no root etc ... (I didn't touch anything).
Yesterday, it reboot by itself but I got bootloop (starting apps then again lenovo boot image ...)
I try to factory reset by using the recovery metohd, it's start normally (optimizing apps ...) but then reboot and again bootloop ...
So I try to sideload the official COS ROM from Cyanogen Support (cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip), but the sideload stuck at 47% and saying total xfer: 1.00x and the phone go back to recovery but still have boot loop ...
I try to boot in fastboot and use the All In One tool to flash official ROM but didn't work (Its say that the bootloader is lock)
I find without knowing this menu a debugging hardware tool test, and then I run the test, its say SD : Fail and in another I got SD : Fail and no sd fuse in dir
I saw many thread here and on google, and some say that we have to use qfil/qpst method, and find this which seems complete : http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
But as I don't know if its hardware issue or soft brick ...
Could someone help me to recover my phone to COS or CM by using the right method ?
Thank you !
Click to expand...
Click to collapse
Go with qpst/qfil method to recover your phone
And did you tried changing the USB port or cable while side loading cos ROM .. Cause most of issues are solved by the changing USB port or cable.. So try this.. Or else qfil is the option

shubhambhise said:
Go with qpst/qfil method to recover your phone
And did you tried changing the USB port or cable while side loading cos ROM .. Cause most of issues are solved by the changing USB port or cable.. So try this.. Or else qfil is the option
Click to expand...
Click to collapse
Hello,
I got help on the telegram group, we try many thing, the result is that I can only get ZUI working, if flashing COS via QFIL, I get the same result, if I flash ZUI, unlock bootloader, flash TWRP, wipe everything, then sideload CM13, TWRP say that no os is installed and I get a bootloop at the bootloader ...
ZUI is good, but I get some error regarding notification.
If you have any other idea ?

wackou said:
Hello,
Ok, here is the situation
I have a Zuk Z1 with last COS update 12.1 with locked bootloader, no root etc ... (I didn't touch anything).
Yesterday, it reboot by itself but I got bootloop (starting apps then again lenovo boot image ...)
I try to factory reset by using the recovery metohd, it's start normally (optimizing apps ...) but then reboot and again bootloop ...
So I try to sideload the official COS ROM from Cyanogen Support (cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip), but the sideload stuck at 47% and saying total xfer: 1.00x and the phone go back to recovery but still have boot loop ...
I try to boot in fastboot and use the All In One tool to flash official ROM but didn't work (Its say that the bootloader is lock)
I find without knowing this menu a debugging hardware tool test, and then I run the test, its say SD : Fail and in another I got SD : Fail and no sd fuse in dir
I saw many thread here and on google, and some say that we have to use qfil/qpst method, and find this which seems complete : http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
But as I don't know if its hardware issue or soft brick ...
Could someone help me to recover my phone to COS or CM by using the right method ?
Thank you !
Click to expand...
Click to collapse
Hope this will help you
Check this out
http://forum.xda-developers.com/zuk-z1/help/helpppp-t3505990

http://forum.xda-developers.com/zuk-z1/general/guide-how-to-unlock-root-install-twrp-t3394037
This will help you

Xiaomi redmi pro locked bootloader & bootloop

My Redmi Pro have bootloop when I Uninstalling Kingroot and restarting the phone, please help, I have try with sp-flashtool, its success but still bootloop. and my redmi pro is still locked the bootloader then I can't Use with Mi-Flash app, Please help....

elanonsites said:
My Redmi Pro have bootloop when I Uninstalling Kingroot and restarting the phone, please help, I have try with sp-flashtool, its success but still bootloop. and my redmi pro is still locked the bootloader then I can't Use with Mi-Flash app, Please help....
Click to expand...
Click to collapse
Hello Bro Just Format you phone in SP Flash tool and Reflash Rom.. I hope it will help you...

iqbalmastoi786 said:
Hello Bro Just Format you phone in SP Flash tool and Reflash Rom.. I hope it will help you...
Click to expand...
Click to collapse
I have already do with SP-Flash Tool until the green checkbox popup and flashing success! but still bootloop. any body help me.......

there is a recovery rom (fastboot rom) available
For me it worked.^
http://en.miui.com/thread-193681-1-1.html
Be sure to fetch the Redmi Pro files instead !!!
The rest is as described.

elanonsites said:
I have already do with SP-Flash Tool until the green checkbox popup and flashing success! but still bootloop. any body help me.......
Click to expand...
Click to collapse
what did you do bro.?

Old theme, so just to share my solution.
After SP Flash tool flashing China developer ROM (download only), i still had bootloop. So i opened phone, disconected battery and volume+, - , and power buttom. Then reconnected them, turn on the phone and its booting again

Got bootlooped PLEASE HELP THE PHONE IS DEAD

Hey a friend of mine has a redmi pro .. why trying to open the phone but after sucess flash on sp flash tool the phone get into bootloop on the mi logo and keeps restarts itself .. we tried to flash twrp but seems that the BL is locked and we cant flash it, might an idea would be flash a custom rom through TWRP recovery but didnt help since we cant flash twrp .. any idea how to fix it ? I followed this video bellow but nothing changed .. Tried also on Sp flash tool Download only, Firmware Upgrade etc .. all the same problem ..
https://www.youtube.com/watch?v=-CuMZzdEQg8&t=202s

the current image(boot/recovery) have been destroyed and can not boot. Please help

Hi
Please i need help
I want to unlock bootloader and flash TWRP & Magisk on my realme 2 pro 4/64, after i flash all items, my phone was bootlop
Then i tried to relock bootloader, after that, my phone cannot boot and only showed this message.
"the current image(boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it"
how can i fix it?
note : i attached images of the problem, thats not my pictures, i save from the pther person who have the same problem. but i can find the best solution
thank you very much

flash stock recovery through fastboot. Then again install twrp custom recovery through fastboot. Then install stock zip rom by flashing through twrp. You can get stock recovery and stock rom from the following link.
https://forum.xda-developers.com/realme-3-pro/how-to/guide-to-stock-rom-stock-recovery-t3940604

fix
kisutbener said:
Hi
Please i need help
I want to unlock bootloader and flash TWRP & Magisk on my realme 2 pro 4/64, after i flash all items, my phone was bootlop
Then i tried to relock bootloader, after that, my phone cannot boot and only showed this message.
"the current image(boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it"
how can i fix it?
note : i attached images of the problem, thats not my pictures, i save from the pther person who have the same problem. but i can find the best solution
thank you very much
Click to expand...
Click to collapse
have you fixed?how

Bootloop please help asap!!
I was trying to install custom rom but I didn't took back up and wiped every thing on internal memory and also flashed stock recovery of realme 2 pro LOCKED the bootloader also I was hoping that I would be able to install stock rom by realme . But now am stuck at bootloop only realme logo appers
Basically I only have stock recovery on my phone and nothing else in the internal no OS installed bootloader is also locked so am not able to install twrp recovery to please help me install any rom .I am stucked due to lockdown no Service center is open. Please help asap??? I can't leave without my phone in this lockdown

davsagar4 said:
I was trying to install custom rom but I didn't took back up and wiped every thing on internal memory and also flashed stock recovery of realme 2 pro LOCKED the bootloader also I was hoping that I would be able to install stock rom by realme . But now am stuck at bootloop only realme logo appers
Basically I only have stock recovery on my phone and nothing else in the internal no OS installed bootloader is also locked so am not able to install twrp recovery to please help me install any rom .I am stucked due to lockdown no Service center is open. Please help asap I can't leave without my phone in this lockdown
Click to expand...
Click to collapse
Possible 100% solution, but it's paid.(800 inr)
In my case I'm fully locked (by vol down and power,vol up and power,both up down and power) i only see error..(no fastboot windows)
So to overcome this you need to pay someone some money (i paid 800,for oppo special I'd and password for 1 time),and download a compatible firmware (rom) and msm download tool in pc make sure you also have team viewer, as damn oppo won't allow you to flash firmware for free ad there is no crack for msmtool...hope this helps.. i also did this process during lockdown and learned a moral:-never relock bootloader
Qfil and other processes doesn't worked for me?
Don't wast time in crackes etc there is no official crack of realme 2 pro firmware bcoz there is always a different tool for each rom???..
I waited to fix this for 27 days.

davsagar4 said:
I was trying to install custom rom but I didn't took back up and wiped every thing on internal memory and also flashed stock recovery of realme 2 pro LOCKED the bootloader also I was hoping that I would be able to install stock rom by realme . But now am stuck at bootloop only realme logo appers
Basically I only have stock recovery on my phone and nothing else in the internal no OS installed bootloader is also locked so am not able to install twrp recovery to please help me install any rom .I am stucked due to lockdown no Service center is open. Please help asap
Click to expand...
Click to collapse

He_man_r35 said:
Possible 100% solution, but it's paid.(800 inr)
In my case I'm fully locked (by vol down and power,vol up and power,both up down and power) i only see error..(no fastboot windows)
So to overcome this you need to pay someone some money (i paid 800,for oppo special I'd and password for 1 time),and download a compatible firmware (rom) and msm download tool in pc make sure you also have team viewer, as damn oppo won't allow you to flash firmware for free ad there is no crack for msmtool...hope this helps.. i also did this process during lockdown and learned a moral:-never relock bootloader
Qfil and other processes doesn't worked for me?
Don't wast time in crackes etc there is no official crack of realme 2 pro firmware bcoz there is always a different tool for each rom???..
I waited to fix this for 27 days.
Click to expand...
Click to collapse
hey can you provide me that person's contact info?

Unable to boot - Oneplus8 pro

Hi Everyone,
I have an issue with my Oneplus8 pro and below are the details
1. The device was working perfectly. I was interested to root the device and install a custom ROM.
2. The method used was to try and flash a patched boot image for the device but I think i landed up using a wrong boot image file.
3. The OS was on 10.5.10 if I remember correctly. I used a patched image file I suppose of an older firmware. Now restarts and goes to "QUALCOMM Crashdump mode". The only options are
a. reboot to fastboot mode
b. flash the TWRP for Oneplus 8 pro but that doesnt mount by storage so cant really transfer anything to flash again.
Requesting some help to fix the issue and apologies if i have not explained correctly.

Tried booting a stock boot image?

neverborn said:
Tried booting a stock boot image?
Click to expand...
Click to collapse
Hey,
Thank you for a quick repsonse. Yes, i had tried doing that and still the same error however while we speak, i just downloaded the msmDownloadtool and tried using it to flash a stock firmware and finally, i am so happy to see the device boot sucessfully
Thank you once again for tryin to help
Regards

Hello.
Clarify exactly how the procedure took place