[HELP] LG D802 back to stock - G2 Q&A, Help & Troubleshooting

Hey guys ,
i'm running cm 12 official on my d802 32gb version.
A couple of weeks ago i wanted to update to cm 13 and to do that i had to update TWRP to the Marshmallow compatible version 3.0.
So at first I downloaded TWRP 2.8.6.0. as a zip for my the d802 and flashed it using flashify to install TWRP 3.0 with it.
Accidentally I denied to reboot after flashing the 2.8.6.0. version and rebootet directly into the recovery.
So thats what I think was the mistake why I bricked my recovery... Fortunately I'm still able to boot into the old cm 12 without a problem.
So now I backed up all my data to go back to the stock LG firmware using the LGFlashTool.
Now before I start I want to ask you guys if you could check if im using the right programs.
I already installed the Lg Mobile driver and the LGFlashTool.
Then I downloaded the "BIN_LGD802AT-00-V10b-SEA-XX-SEP-04-2013-32G+0.tot" file from storagecow.eu/index.php?dir=Xda%2FLG+G2%2FStock%2FD802+tot%2F
and the "LGD802_20130912_LGFLASHv160.dll" file from storagecow.eu/index.php?dir=Xda%2FLG+G2%2FStock%2FD802+tot%2Fdll+file%2F.
So am I ready to go, if I use this method: youtube.com/watch?v=wJtcPNklrfw with the files listed above?
It would really be nice if somebody could help me out

NewKidsBob said:
Hey guys ,
i'm running cm 12 official on my d802 32gb version.
A couple of weeks ago i wanted to update to cm 13 and to do that i had to update TWRP to the Marshmallow compatible version 3.0.
So at first I downloaded TWRP 2.8.6.0. as a zip for my the d802 and flashed it using flashify to install TWRP 3.0 with it.
Accidentally I denied to reboot after flashing the 2.8.6.0. version and rebootet directly into the recovery.
So thats what I think was the mistake why I bricked my recovery... Fortunately I'm still able to boot into the old cm 12 without a problem.
So now I backed up all my data to go back to the stock LG firmware using the LGFlashTool.
Now before I start I want to ask you guys if you could check if im using the right programs.
I already installed the Lg Mobile driver and the LGFlashTool.
Then I downloaded the "BIN_LGD802AT-00-V10b-SEA-XX-SEP-04-2013-32G+0.tot" file from storagecow.eu/index.php?dir=Xda%2FLG+G2%2FStock%2FD802+tot%2F
and the "LGD802_20130912_LGFLASHv160.dll" file from storagecow.eu/index.php?dir=Xda%2FLG+G2%2FStock%2FD802+tot%2Fdll+file%2F.
So am I ready to go, if I use this method: youtube.com/watch?v=wJtcPNklrfw with the files listed above?
It would really be nice if somebody could help me out
Click to expand...
Click to collapse
not sure of the files you selected . its kind of confusing..
you can also use this to flash
http://forum.xda-developers.com/lg-g2/general/guide-vdo-flashing-kdz-tot-firmware-t3289950

Related

[Q] What did autorec do to my phone?!?

Hi all,
Let me try to walk you through everything that I've done to try and get some help here.
I have an lg g2 sprint (lg-ls980)
1. When I got it I first upgraded to android 4.4.2
2. Then I rooted using stump root
3. I installed xposed and a few xposed modules....I then decided Id rather have a different rom, so
4. I used autorec (which to my understanding changed my kernel in order to workaround boot loader and install twrp? is that accurate?)
5. Booted to twrp, wiped data and installed cyanogenmod and gapps
After this I get stuck and can't boot past the lg logo, so I booted back to recovery and restored my backup. So I did the same and tried pacrom this time with the same results.
I then decided that if I'm going to be stuck with stock rom I at least want my knock on back, so I flashed the patched kernel and same thing- stuck at lg logo....
I know I downloaded the correct zip files and placed them on the root, and always wiped before flashing.
Then I went into download mode on the lg support tool to try to get back to factory, but it says my firmware and recovery is up to date. The odd thing is that the lg support tool shows my phone as ls740 rather than ls980... is this because of something that autorec changed? Do I need to download zip files for ls740 instead? So confused..
About phone in my g2s settings shows android version 4.4.2 and kernel version 3.4.0
Anyways, if anyone could help me to successfully get one of these roms to flash and get back to the kernel that supports the knock code I would really appreciate it.
Thanks in advance!

[Q&A] [GUIDE] INSTALLING TWRP on LGG2 (VZW, AT&T, TMobile, KT, d802, others) [UPDATE

[Q&A] [GUIDE] INSTALLING TWRP on LGG2 (VZW, AT&T, TMobile, KT, d802, others) [UPDATE
Q&A for [GUIDE] INSTALLING TWRP on LGG2 (VZW, AT&T, TMobile, KT, d802, others) [UPDATED]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GUIDE] INSTALLING TWRP on LGG2 (VZW, AT&T, TMobile, KT, d802, others) [UPDATED]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
About flashing TWRP on the LG G2
This is a reply to the last post in the LG/TWRP post: http://forum.xda-developers.com/showthread.php?t=2449670&page=116
And specifically, I was about to ask the same question as "ctowne", about the lack of loki_flash in the loki package pointed in the instruction page.
I'm really stuck here, because I already "soft bricked" my phone (rooted LG G2 D802 international) in two different states that required a complete flash and wipe with the originale LG ROM and tool. And one of these was caused by the AutoRec tool, which apparently doesn't work for lot of people and could lead to bootloops.
So, before trying anything I'd like to be sure I'm doing the right thing, and more importantly, that I have the complete instructions to do it.
To sum it up:
-according to the thread, I need the loki package and the TWRP package, but there is no loki_flash inside the actual loki package
-but there's one inside the last TWRP package! Should I use this one?
-also, is not clear where I need to move all the files to make everything works
Thanks in advance.
pixelcamo said:
This is a reply to the last post in the LG/TWRP post: http://forum.xda-developers.com/showthread.php?t=2449670&page=116
And specifically, I was about to ask the same question as "ctowne", about the lack of loki_flash in the loki package pointed in the instruction page.
I'm really stuck here, because I already "soft bricked" my phone (rooted LG G2 D802 international) in two different states that required a complete flash and wipe with the originale LG ROM and tool. And one of these was caused by the AutoRec tool, which apparently doesn't work for lot of people and could lead to bootloops.
So, before trying anything I'd like to be sure I'm doing the right thing, and more importantly, that I have the complete instructions to do it.
To sum it up:
-according to the thread, I need the loki package and the TWRP package, but there is no loki_flash inside the actual loki package
-but there's one inside the last TWRP package! Should I use this one?
-also, is not clear where I need to move all the files to make everything works
Thanks in advance.
Click to expand...
Click to collapse
Are you sure you downloaded the correct version of autorec? I have a VS980 and autorec worked perfectly....even after updating to the latest version (26A), after which I flash TWRP 2.8.0.1 via recovery (which autorec installs 2.7.0.0).
simon_lefisch said:
Are you sure you downloaded the correct version of autorec? I have a VS980 and autorec worked perfectly....even after updating to the latest version (26A), after which I flash TWRP 2.8.0.1 via recovery (which autorec installs 2.7.0.0).
Click to expand...
Click to collapse
Apparently something went wrong with my first install. I tried again and the AutoRec flash went OK!
BTW, how do you update TWRP? Just flashing the zip via recovery and nothing else?
pixelcamo said:
Apparently something went wrong with my first install. I tried again and the AutoRec flash went OK!
BTW, how do you update TWRP? Just flashing the zip via recovery and nothing else?
Click to expand...
Click to collapse
Yes. Have whatever version of TWRP on your phone and flash it. Make sure to reboot recovery and it will show the current version flashed.
newbie
for starters my phone was rooted 2 hours ago , i used stump to root ,i have downloaded twrp and flashify from playstore...and im stuck i just want to finish the process i have lg g2 from sprint..i would appreciate any help thanx
help please
i have rooted my lg g2 but when i go into recovery to install a custom romm i get a dead android with his chest open and a red triangle with exclamation mark in it is there anyway to fix this with out a computer
I am using
VS980 4G LTE
Into recovery or custom recovery?
plz help
i have lg g2 32 gb.
thailand.bought 1 week ago.
it was running 4.4.2. when i checked ota it was latest. but when i checked through lg gupport tool. it had latest soft ver. then i updated . and got in trouble...
i saw that my mobile shows 10.6 gb, and baseband is unknown.
1. touch screen not work correctly. i touch something and open something else.
2. i have tried to upgared recovery. but after downloading the software lg support tool work stopped and get closed. also tried to factory reset but nothing changes.
3. then i tried to flash kdz.. and about 7 to 8 different kdz tried. but didnt get help.
4. then i tried to root and install custom recovery (twrp)
but first it didnt work then it worked by installing many drivers to recognized.
any how i got access to adb. and tried to root through loki_flash using adb.
i got rooted but when i triend to install twrp. it doesnt install neither through loki_flash nor adb sideload.
5. then some how i flashed the recovery through adb.and got access to recovery but i cant install anything beside ioroot.
6.i tried to install flashable rom, baseband or cloudy rom but didnt help . it shows E: footer is wrong , verification failed something like that.
7. when i use fastboot. it didnt recognize my device and show" waiting for device".
i didnt get qhsbulk mode in device manger but i get android lge in adb devices.
i think that i have lost efs partition and boot images.
Access:
have access to download mode, adb shell, stock recovery(side load).
please help me asap.
TWRP issue
i am installing TWRP recovery in my LG G2 D802 (D80210b) but i am getting this error kindly help me to solve the issue.
Flashify...
Can I install TWRP using flashify. ??
If you're on KitKat then - yes you can
Sent from my Nexus 5 using Tapatalk
Critical Error
Please help me! I just flashed with the method 2 and when i rebooted to recovery mode I got this:
DemiGod Crash Handler : Critical Error!
Press Key to Choose Dload Mode or Reboot
1) Volume up : Dload Mode.
2) Volume Down: Reboot.
If u choose Dload Mode.
please do following action.
1) Dload Mode. please Connect USB
2) Get the Ram Dump image using QPST Configuration.
My phone is working perfect I just don't have recovery!
I reflashed it but nothing!
twrp recovery error
hi there
i have a LG G2 D800 with android 4.4.2 and rom 20y,
some days ago i download TWRP latest version flashable zip file from TWRP site, i extract .img file from zip and flashed that with flashify [root] , but when flash complected phone reboot and goes to Recovery mod, in recovery mod shows 3 error in up side-right [seurce boot failed] and phone stay with a blach screen, dosnt worked . not bricked.
reset factory not response.
now i want to install MIUI 4.4.2 rom, but i havnt any recovery even lg offecial .
i dont now any thing about Adb shel, how ill can repair and install TWRP recovery on my d800 g2??
tnx a lot

Help me,, Cannot boot in to recovery

Please help needed!!
I'm stuck here for 3 days
Ok I'm going to tell everything I did,,
My Gionee E7 is indian version.
First I rooted my phone with kingo Root.
Than I flashed CWM chinese version.
I upgraded my system to kitkat and changed the recovery to stock.
I used it for a week than some how my music player and gallery were corrupted.
I don't have any rom so I download one but it was in chinese, flashed it to my gionee. than after rooting,,
I flashed the CWM, same I flashed weeks ago
Here my problem started :crying:
The CWM is not starting. I used recoery tool to boot into recovery after boot up it shows black screen. I used every method holding Vol+ and power button but the same result.
than I tired to get back to my stock recovery but it does the same.
flashed many times both recoveries but didn't worked.
I searched a lot and find a TWRP. I flashed it and wow it worked Finally I can boot into recoery mode.
Now I find the Nandroid backup of indian version. I made it a zip and flashed it through twrp.
My phone is back to indian version but its slow, not too much but its slow; camera, gallery and other apps take some time to open. I can't make or rcv phone calls. Now what i did is download the update form System update.
Now i got kitkat rom.zip but twrp failed to install it.
Some one on the internet was saying that its the problem with my Kernel. I have the latest kernel so CWM won't work cuz it uses old kernel and display drivers.
My
android version is 4.2.2
Kernel version is 3.4.0-svn2155
I also got TWRP for lolipop,
and I patched binary_update in my kitkat rom too but TWRP can't flash it
Thats my whooooolllleeeee story. "
I got stuck with this for almost 3 days now I'm damn tired can't do it anymore plz help :crying::crying::crying:
I figured it out by myself
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
AkashX4686 said:
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
Click to expand...
Click to collapse
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
No its not, it is working on 64bit windows very well.
In TWRP factory reset and format system and data, than install
Chinese 4.2 ROM. After that boot it and try it again.
It should work!
bllkarv said:
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
Click to expand...
Click to collapse
For me...problem!
thereĀ“s a cwm recovery that flashes over the kernel...
i flashed it and than i was unable to go to recovery, every time i tried the phone power off
Solution: Flash the stock boot.img
Use the file according to the Android version...
Help
I just rooted my gionee elife e7. Flashed the chinese recovery which seemed to be the only one which would be compatible. But, while changing a few setting using pimp my rom, the software just stopped working. Errors keep showing up on the screen - "system.ui is not working", "android app is not working", I cannot even go the settings because "settings is not working". Third party apps still seem to work, so, whatsap and stuff continue to function. Doing a factory reset or flashing firmware again seem to be the only viable option.
But, when I try to load up the bootloader using the power and volume keys, it gets stuck on the screen showing the gionee logo and it reads 'fastboot mode' in the bottom left hand side corner. So,
a. can you offer any advice which may be useful ?
b. can you share the link from where you got a TWRP recovery which will work on the Elife ?
c. do you have any idea what exactly went wrong here ?
Any help you can provide will be appreciated because, it's my mausi's phone and I will have a very tough time explaining what really went down here.
Regards,

D800 - I just can't get CloudyG2 working no matter what I do...

I've been having issues with my phone, and I'm not sure if this is a HW issue or not, but no matter what I do, either I lose recovery or get a security error. I poked around and found some instructions in the CloudyG3 thread. They're for 3.0 but I would guess 3.3 wouldn't be different enough to brick this thing. Can't remember who the quote is from, I just copy/pasted it, but here it is:
Some of you sent me a PM asking for the install instructions on D800 and this is how you install CloudyG2 3.0:
Downloads:
1. Download CloudyG2 3.0 - https://www.androidfilehost.com/?fid=95897840722646001
2. Download Patch - https://mega.co.nz/#!sVY0mRTb!qn7S9B...3m_QpMQkgzunn0
3. Download Signal Patch - https://dl.dropboxusercontent.com/u/...l_Variants.zip
4. Download LP Baseband - http://blastagator.ddns.net/modem.php - d800-30f-modem-blastagator-signed.zip
5. Download KK Bootstack - http://blastagator.ddns.net/bootloader.php - bootstack-d800-KK_20c-blastagator-signed.zip
6. Optional: Download JB Bootstack in case if you want to revert the installation process and go back to your current ROM - http://blastagator.ddns.net/bootloader.php - bootstack-d800-JB_10d-blastagator-signed.zip
Flashing Process:
1. Backup the existing ROM (including EFS, Modem, etc.) in TWRP - very important and copy it over to the computer, just in case!
2. Wipe System + Data + Cache + Dalvik Cache - Do NOT select internal storage as it contains all your downloaded files + backups!
3. Flash KK Bootstack (downloaded from Step 5)
4. Flash LP Baseband (downloaded from Step 4)
5. Flash CloudyG2 3.0 (downloaded from Step 1) - Leave the default in Aroma when you have to pick the variant. Do NOT reboot the device as the patch installation (next Step) is very important.
6. Flash Patch (dowloaded from Step 2) - Select your variant.
7. Flash Signal Patch (downloaded from Step 3)
8. Reboot
Enjoy!
Click to expand...
Click to collapse
I'm guessing I have the incorrect files, most of the links I found in the thread with these instructions didn't seem to work so I Googled for them, maybe I don't even have the correct files. I took a screenshot in cmd of the exact filesizes.
Any help would be greatly appriciated!
level5music said:
I've been having issues with my phone, and I'm not sure if this is a HW issue or not, but no matter what I do, either I lose recovery or get a security error. I poked around and found some instructions in the CloudyG3 thread. They're for 3.0 but I would guess 3.3 wouldn't be different enough to brick this thing. Can't remember who the quote is from, I just copy/pasted it, but here it is:
I'm guessing I have the incorrect files, most of the links I found in the thread with these instructions were dead mega.co.nz links so maybe I don't even have the correct files. I took a screenshot in cmd of the exact filesizes.
Any help would be greatly appriciated!
Click to expand...
Click to collapse
you want to install cloudy g2 3.3?
this is whati did
used to root http://www.droidviews.com/easily-root-lg-devices-using-the-one-click-root-script/ if you are on lollipop it gets stuck at 90% twice after 3 attemps same stuck at 90% rebooted and it was rooted
then on playstore i used autorec canat remeber if it says v2.. but for lollipop installed and it checked my device and its said it was ready. so i just clicked twrp and it installed twrp then i downloaded blastogator twrp and installed cloudy g2 3.3 on d800 unlocked... sorry if you were refferimg to another version of cloudy..
raptorddd said:
you want to install cloudy g2 3.3?
this is whati did
used to root http://www.droidviews.com/easily-root-lg-devices-using-the-one-click-root-script/ if you are on lollipop it gets stuck at 90% twice after 3 attemps same stuck at 90% rebooted and it was rooted
then on playstore i used autorec canat remeber if it says v2.. but for lollipop installed and it checked my device and its said it was ready. so i just clicked twrp and it installed twrp then i downloaded blastogator twrp and installed cloudy g2 3.3 on d800 unlocked... sorry if you were refferimg to another version of cloudy..
Click to expand...
Click to collapse
Coming off a fresh TOT flash, I root with towelroot, flash TWRP using AutoRec, flash bootloader, then flashed Cloudy. It will boot at first, but then I run into "black screen of death" or security errors or when trying to boot to recovery, I'll run into similar issues. Does Blastagator's TWRP make the difference here?
level5music said:
Coming off a fresh TOT flash, I root with towelroot, flash TWRP using AutoRec, flash bootloader, then flashed Cloudy. It will boot at first, but then I run into "black screen of death" or security errors or when trying to boot to recovery, I'll run into similar issues. Does Blastagator's TWRP make the difference here?
Click to expand...
Click to collapse
no not really, but i do know that we had to use 2871 cause newer version were wiping f2fs, so now latest build its working but i dont think it has something to do .... am sorry i just got mine like a week ago and mine was in lollipop.. so i know nothing about coming from other version of android. dont even know whatsa tot flash.. i still need to learn alot..
check here and see if you can find a way to fix this good luck
http://forum.xda-developers.com/lg-g2/general/05-10-index-guides-fixes-roots-t3218178
level5music said:
Coming off a fresh TOT flash, I root with towelroot, flash TWRP using AutoRec, flash bootloader, then flashed Cloudy. It will boot at first, but then I run into "black screen of death" or security errors or when trying to boot to recovery, I'll run into similar issues. Does Blastagator's TWRP make the difference here?
Click to expand...
Click to collapse
I had the exact problem happen to me ....... I got the black screen of death .... phone wouldnt boot ....... and when i used the kk bootloader i would lose recovery ..... I was coming from kk to CloudyG2 ....
This is how i solved.
1. Flashed back to stock, stumproot to root Autorec v1 for bootloader
2. used Flashify to upgrade to 2.8.7.1 ( its now 2.8.7.3)
3. Downloaded n used bumpted LP bootstack and flashed blastagator stripped rom (its in flashable zip and installs everythin including modem .... patches etc EVERYTHING) http://forum.xda-developers.com/att-g2/development/rom-stock-lollipop-30b-stripped-t3144195
4. Downloaded kk bootstack , CloudyG2 3.3 and clean flashed in recovery
I have been enjoying Cloudy ever since ...... D800
Thanks all, got it running! Cloudyfa has done some absolutely brilliant work here with this ROM, as well as xdabbeb with the advanced camera driver and xCam. I'm usually a vanilla-or-nothing guy with my Android ROMs but this one is quick and power efficient. The KitKat ROM that shipped with the phone was super bloated and gross, but I'll admit LG UX 4.0 isn't really that offensive, plus I like the goodies like Multi-Window and QuickRemote. Once I disabled/hid some of the remaining LG bloat, it's surprisingly pleasant and not really that far from AOSP aesthetically. Again, cheers to those who provided the assist on this one for me!
... now my only question is, should I try CloudyG3?

TWRP backups available for download?

Hi there,
my 802 is running on TWRP after I updated to the latest stock ROM (30D Europe Open). Unfortunately due to problems mentioned in another thread I cannot install a custom ROM currently. Does anyone here have a mirror for me where I can download a TWRP backup of the stock ROM?
Thank you in advance
If you can't install a custom rom, what makes you think you can install a stock? It's pretty easy.
Very helpful... I flashed the latest KDZ on the G2, rooted it and installed TWRP 3.0.2.0, so far so good (believe it or not I flashed a dozen other android devices before). However when I try to install a Marshmallow ROM it gives me Error 7, so that means that getprop.device or so doesnt bring the correct value up. Now when I tried to switch to an older TWRP which is supposed to not have that Error 7 issue (2.7.0.0) I get an error saying I am missing the Loki files in the tmp folder. Now I do not know how to get around the Error 7 (the fix that is mentioned on here didnt work for me, brings up Error 6 instead) I would like to return to a stock backup.
How about giving me actual advice or leaving and letting other people help?
Edit: Booted in Download Mode and flashed v30D KDZ with the 2014 LG Flashtool. Works with Stock ROM for now

Categories

Resources