SM-530NU Path to Marshmallow update with Root - Galaxy Tab 4 Q&A, Help & Troubleshooting

Hello,
I am currently on
Android Version 4.4.2
Build KOT49H.T530NUUEU1ANK1
Kernel Version 3.4.0-2648317
I got here by performing a complete wipe, then using the thread here by thisisapoorusernamechoice to find the file. I used Odin 10.1 to get the download to the tablet (Samsung Galaxy Tab 4 10.1 wifi from Costco, also called matisse).
I then flashed TWRP 3.0, then flashed the CF Autoroot and SU to gain root.
Since, then, I tried to install a ROM (Dirty Unicorns Matisse) unsuccessfully. I didnt get past the Samsung Logo. It froze.
I have not found by searching and reading the forum, a well-replicated method to get to Marshmallow.
What is the best way to get to a stable version of Marshmallow and retain root?
Any help would be much appreciated.
Thanks

pappiloo said:
Hello,
I am currently on
Android Version 4.4.2
Build KOT49H.T530NUUEU1ANK1
Kernel Version 3.4.0-2648317
I got here by performing a complete wipe, then using the thread here by thisisapoorusernamechoice to find the file. I used Odin 10.1 to get the download to the tablet (Samsung Galaxy Tab 4 10.1 wifi from Costco, also called matisse).
I then flashed TWRP 3.0, then flashed the CF Autoroot and SU to gain root.
Since, then, I tried to install a ROM (Dirty Unicorns Matisse) unsuccessfully. I didnt get past the Samsung Logo. It froze.
I have not found by searching and reading the forum, a well-replicated method to get to Marshmallow.
What is the best way to get to a stable version of Marshmallow and retain root?
Any help would be much appreciated.
Thanks
Click to expand...
Click to collapse
To get MM or another rom based CM 12-13 you need at first update your stock firmware to 5.02 OS (for example via Odin). Then again get TWRP, root and backup your firmware. And only after this you can install DU rom successfully.

Related

How to root Samsung galaxy A5

I have Samsung galaxy A5, SM-A500H. Running Android 5.0.2, downloaded from here. I want to root it.
The only root available right now AFAIK, is CF-Auto-Root, as described here for example. But this root breaks everything, all the apps stop running when you reboot the phone and you have reinstall the firmware, it doesn't work.
Is there another way to root my device?
http://forum.xda-developers.com/gal...ot-galaxy-a5-a500fu-lollipop-5-t3137613/page9
no problems with my a500fu yesterday i flashed TRWP with succes
Ask root galaxy A500f on lollipop stock rom Rusia
Please give me method root galaxy A500f on lollipop stock rom Rusia..because i dont know...please help me
mjs87 said:
http://forum.xda-developers.com/gal...ot-galaxy-a5-a500fu-lollipop-5-t3137613/page9
no problems with my a500fu yesterday i flashed TRWP with succes
Click to expand...
Click to collapse
the method you suggest, is great, i always wanted to know how that's done but can't do it, since it will require me to reflash the phone and reinstall the rom
This answer is for future users
first if you want to upgrade to 5.02
http://www.sammobile.com/firmwares/database/SM-A500H/
I use the unknown carrier but you could pick any. just create an account there first.
and to root it, the only safe way, all other ways, it will break it, so again the only safe way to root that thing
http://www.kingroot.net/
didn't work before, now is working, download the apk, root it, takes 5 min, restart your phone, have a nice day

[Q] N9100 China Dual Sim ROOT for 5.1.1

I just updated my phone to OK1 firmware running on 5.1.1. This si the China variant and not hong kong. I was wondering if there is a working root for this firmware? I've tried the CF auto root of the 4.4.4 version but it sends me into a bootloop. I've searched everywhere but can't find anything. Any help will be appreciated.
I can't root N9100 android 5.1.1 (N9100ZCU1COK1) by root file CF-Auto-Root-trltechn-trlteduoszc-smn9100.zip for android 4.4.4.
Then is there no way to root for that firmware?
anyone? desperately need Gapps on my phone right now...
Hi. I have installed an aurora rom with version 5.1.1 N9100ZCU1COK1 and I'm rooted. But I just kept the root that I had before updating so I didn't use CF-Auto-Root or anything else this time... have you tried kingroot?
Deviatorz said:
anyone? desperately need Gapps on my phone right now...
Click to expand...
Click to collapse
If your n4 is sm-n9100, bought from China, you can directly flash TGY n9100 rom, I got my n4 couple days before(SM-N9100, trlteduoszh), original rom is China version: N9100CHC1COK1-5.1.1, then just download TGY rom, N9100ZZH1BOF2, which is the latest TGY rom, android version: 5.0.1. After odin flash, do doubble wipe, then everythings just fine. like the orignial hongkong N9100, of casuse you get the stock google apps.
I got ota information yesterday, tgy rom got update to N9100ZHU1COL2-5.1.1, I'm not sure to do update, cos I'd heard 5.1.1 won't get root for the new "reactivation lock" issue, anyone have experience of root your tgy 5.1.1?
Chainfire has a new autoroot for N9100 5.1.1. You can download it HERE
ryanxiao said:
If your n4 is sm-n9100, bought from China, you can directly flash TGY n9100 rom, I got my n4 couple days before(SM-N9100, trlteduoszh), original rom is China version: N9100CHC1COK1-5.1.1, then just download TGY rom, N9100ZZH1BOF2, which is the latest TGY rom, android version: 5.0.1. After odin flash, do doubble wipe, then everythings just fine. like the orignial hongkong N9100, of casuse you get the stock google apps.
I got ota information yesterday, tgy rom got update to N9100ZHU1COL2-5.1.1, I'm not sure to do update, cos I'd heard 5.1.1 won't get root for the new "reactivation lock" issue, anyone have experience of root your tgy 5.1.1?
Click to expand...
Click to collapse
hey thanks for your reply. i actually installed and tried aurora Rom and its been working well. however, my signal is not that great (rogers) and im sure its because of the baseband. ill try that rom and see how well its works.
my ROM is using 5.1.1. i dont have the reactivation lock issue
rjma said:
Chainfire has a new autoroot for N9100 5.1.1. You can download it HERE
Click to expand...
Click to collapse
Could you help me add link download file recovery TWRP or CWM for 5.1.1 after rooted ?
mabu_210 said:
Could you help me add link download file recovery TWRP or CWM for 5.1.1 after rooted ?
Click to expand...
Click to collapse
Check post #60 in THIS thread.
SM-N9100 runing Adroid 5.1.1 rooted successfully.
I followed the following link and successfully rooted mine without any problems.
(sorry. I'm not allowed to post an outside link. Google "How to root Samsung Galaxy Note 4 SM-N9100 Android Lollipop 5.1.1" and you should be able to find the article on recovery-mode.com)
Good luck!
I recently bought N9100 in china and then I flashed my new phone with the latest stock rom N9100ZHS1CPE1 (Hongkong) android 5.1.1 via odin. Worked perfectly. No issues.
rjma said:
Chainfire has a new autoroot for N9100 5.1.1. You can download it HERE
Click to expand...
Click to collapse
Hi, I used the CF-Auto-Root downloaded from this link but it didn't work, I had to reflash the stock ROM to be able to boot the phone. Pls help, I need root badly.
seunskills said:
Hi, I used the CF-Auto-Root downloaded from this link but it didn't work, I had to reflash the stock ROM to be able to boot the phone. Pls help, I need root badly.
Click to expand...
Click to collapse
If you now have 6.0.1 rom, try THIS CF-Auto-Root for 6.0.1
rjma said:
If you now have 6.0.1 rom, try THIS CF-Auto-Root for 6.0.1
Click to expand...
Click to collapse
Thanks for your reply rjma, I had 6.0.1 and I used CF-Auto-Root for 6.0.1 to root but it didn't work, it got stuck on boot screen with some errors. That's why I downgraded to 5.1.1 because 6.0.1 doesn't have google appps.
seunskills said:
Thanks for your reply rjma, I had 6.0.1 and I used CF-Auto-Root for 6.0.1 to root but it didn't work, it got stuck on boot screen with some errors. That's why I downgraded to 5.1.1 because 6.0.1 doesn't have google appps.
Click to expand...
Click to collapse
THIS tutorial is for oneplus 2 but you can use it to Note4. This is what I followed and worked for me.
rjma said:
THIS tutorial is for oneplus 2 but you can use it to Note4. This is what I followed and worked for me.
Click to expand...
Click to collapse
I eventually rooted the phone and it's too easy to be true. I downloaded it's specific twrp, flashed it via Odin without the battery so it won't boot up after flashing, then boot into twrp recovery and flashed SuperSU.
seunskills said:
I eventually rooted the phone and it's too easy to be true. I downloaded it's specific twrp, flashed it via Odin without the battery so it won't boot up after flashing, then boot into twrp recovery and flashed SuperSU.
Click to expand...
Click to collapse
I have the exact same problem
what version of supersu did you flash?
Deviatorz said:
hey thanks for your reply. i actually installed and tried aurora Rom and its been working well. however, my signal is not that great (rogers) and im sure its because of the baseband. ill try that rom and see how well its works.
my ROM is using 5.1.1. i dont have the reactivation lock issue
Click to expand...
Click to collapse
N9100 only supports B7, it does not support B2 and B4. And this is the reason why you get a weak signal (B7 is high frequency with poor coverage).
Using the custom recovery posted above I managed to get root. just boot in download mode and remove the battery after that, flash twrp recovery from above link with odin (you can make a flashable .tar.md5 yourself or just use this one:
https://mega.nz/#!xNslVYLa!zDQdqxVyam7H2Q8xzvZnyQ7DyhPqy2jgs1TE1fLEJjo
. put the battery back in and boot into recovery, copy the supersu.zip (I used the latest one from this link: https://download.chainfire.eu/1012/SuperSU/SR3-SuperSU-v2.78-SR3-20161103171345.zip?retrieve_file=1 , but you can use the latest one). Flash it and reboot normally. Don't let twrp root your phone (it will ask you to root when you select "reboot system" from recovery, just select don't install root, or something like this).
Note that the above rooting method worked for the latest 5.1.1 firmware (from 10 October 2016) for Hong-Kong, PDA N9100ZHU1CPI3, CSC N9100ZZH1CPI3.
You can download the firmware from here: http://www.sammobile.com/firmwares/download/102145/N9100ZHU1CPI3_N9100ZZH1CPI3_TGY/
Also, that firmware fixed some rotation issues I had with the previous one.

Samsung Edge Plus G9297 Variant Root 5.1.1

I have a Galaxy S5 Edge Plus - Chinese / Tiwanese version: G9287. I have just updated it to the most up-to-date firmware: (G9287ZHU2APA1_G9287ZZH2APA1_G9287ZHU2APA1_HOME.tar.md5)
On the previous firmware I rooted the phone using Arter Kernel for g928fcig , using Philz custom rec, which worked fine. With the new firmware I cannot find any way to root the phone. I must have tried about 30 times with a variety of methods and orders but it always get stuck in bootloop so I reflash the stock firmware and stick with it. There's a line in the James song - Oh Sit Down: "If I hadn't seen such riches I could live with being poor". Life just isn't the same with a non-rooted phone. Can anyone shed any light please? I've tried every root method I can see that's out there - all the obvious ones, incl. KingRoot, arter97 v11, CF Auto-Root, AudaxPlus, S6 Unikernel, OH2_DrKetan, SkyHigh_TW_v4.5.
The only thing that does seem to work is I can get TWRP 3 to load through ODIN, but once I load it and come out again the phone bootloops.
Have you tried flashing an early bootloader like G9287ZHU2AOJ6_sboot.tar
https://drive.google.com/file/d/0B62RcNtcpgmpSUk3Mmk0dnNjYnM/view?usp=sharing
That did the trick. Thank you! Much appreciated. I reflashed arter97, superuser through recovery and all is well in the world again. Will keep my eye out for when the more up-to-date firmware is rootable.

Root lost after upgrading to G900W8VLS1DPF3 !

I recently upgraded my S5 firmware to G900W8VLS1DPF3 and a few hours later security update prompt popped up. I went ahead and installed it. Later I realised that root was lost, not sure if it was the security update or the firmware upgrade. Tried PD3 version of CF-Root, it ran successfully but still no root access available. I have tried to look around on the Internet to see anyone has been able to root this firmware, couldn't see anything relevant.
So, is it possible to root this PF3 version, has anyone been successful? Any other methods I could try?
Thanks
No one has a clue?
Hi!
It seems your phone is
Canada (Telus)(TLS)
SM-G900W8
GALAXY S5
6.0.1
flash SuperSU through custom recovery (TWRP for example)
Samsung TWRP page https://twrp.me/devices/samsunggalaxys5qualcomm.html
Reyse said:
Hi!
It seems your phone is
Canada (Telus)(TLS)
SM-G900W8
GALAXY S5
6.0.1
flash SuperSU through custom recovery (TWRP for example)
Samsung TWRP page https://twrp.me/devices/samsunggalaxys5qualcomm.html
Click to expand...
Click to collapse
Thanks Reyse, I have used that method dozens of times and yet it never crossed my mind this time! Must be getting old!
I have root access once again, thanks again.
hello all, someone have a link for update the S5 modem with the last update G900W8VLS1DPF3
just the modem(band)
please
thanks
While I don't know of a website that hosts modem
Images but you can download the whole firmware image and
extract the modem firmware and flash it, which you
probably are aware.
spaziomilano said:
hello all, someone have a link for update the S5 modem with the last update G900W8VLS1DPF3
just the modem(band)
please
thanks
Click to expand...
Click to collapse
I got my updated baseband modem and frmware just from flashing xXx No Limit ROM that's how I got that build on my klte
Sent from my SM-G900W8 using XDA-Developers mobile app

AT&T Note 3 N900a Root + Custom roms?

Hi guys,
Been out of the loop for a while with galaxy phones. Just got a note 3 for at&t and trying to see if I can root and install the latest phronesis rom, or any other custom rom. Here is my system information:
Build number: LRX21V.N900AUCUEOC2
Android version: 5.0
I've heard of safestrap setup and rooting, but can you install any custom roms such as marshmallow?
Sorry if its been asked 1,000 times. Please advise, thanks guys!
You can do anything you set your mind to -Eminem
jxs714 said:
Hi guys,
Been out of the loop for a while with galaxy phones. Just got a note 3 for at&t and trying to see if I can root and install the latest phronesis rom, or any other custom rom. Here is my system information:
Build number: LRX21V.N900AUCUEOC2
Android version: 5.0
I've heard of safestrap setup and rooting, but can you install any custom roms such as marshmallow?
Sorry if its been asked 1,000 times. Please advise, thanks guys!
Click to expand...
Click to collapse
First you must get ODIN which is a program from Samsung
GET Odin HERE : 3.10 http://forum.xda-developers.com/showthread.php?t=2711451
How to use ODIN: http://www.samsungodindownload.com/odin-tutorial/
Second you must get the Marshmallow ODIN files for 4.4.2 Which are as follow....
BL https://www.androidfilehost.com/?fid=96042739161891602
AP https://www.androidfilehost.com/?fid=96042739161891890
CP https://www.androidfilehost.com/?fid=96042739161891603
CSC https://www.androidfilehost.com/?fid=96042739161891604
Using this will revert you back to the N900AUCUCNC2, OPEN ODIN AND RUN THE FILES ACCORDINGLY
Third, In order to easily root I found KINGOROOT TO BE THE EASIEST.. Make sure you enable USB debugging
http://www.kingoapp.com/
BUT you can Also Use TOWEL ROOT: https://towelroot.com/
Fourth Install Super User from GOOGLE PLAY:
https://play.google.com/store/apps/d....supersu&hl=en
open it and run it
Fifth, Install Busy Box
https://play.google.com/store/apps/d....busybox&hl=en
open it and install it
Sixth, Install Safestrap by transferring the APK from your PC to the device and running it.
http://forum.xda-developers.com/devd...ct/dl/?id=7216
Seventh you can pick a Rom from Here:
http://forum.xda-developers.com/note-3-att/development
kuddos to @rootedi747 from post http://forum.xda-developers.com/note-3-att/help/rooting-att-note-3-lollipop-t3201986
Hi Felix,
Thanks so much for the response. Yep, I came across this to root and go to a custom rom of lollipop, but it seems there isn't a Marshmallow rom available for AT&T note 3 due to a locked bootloader.. :/ sigh

Categories

Resources