Related
Hi, I was trying to install cwm recovery from rom manager the tablet has rebooted and you are no longer on again, if I connect it to my pc is recognized as QHsusb load-d .. there is a way to bring it back to life? thanks
same problem
Just ran into the same problem running LagFix from the play store. :crying:
In principle, we would have to flash a new boot.img, but AFAIK that's impossible. On Monday I'm going to call and see if I can RMA it.
For anyone else who stumbles on this thread: DON'T RUN LAGFIX!
UPDATE 4/6 I sent it in to Lenovo. It's due back on Monday.
enproceso94 said:
Hi, I was trying to install cwm recovery from rom manager the tablet has rebooted and you are no longer on again, if I connect it to my pc is recognized as QHsusb load-d .. there is a way to bring it back to life? thanks
Click to expand...
Click to collapse
In case you still need it...here's my solution
http://forum.xda-developers.com/showthread.php?t=2603726
s2110a firmware lenovo
dev>null said:
In case you still need it...here's my solution
http://forum.xda-developers.com/showthread.php?t=2603726
Click to expand...
Click to collapse
guys I need the original firmware lenovo s2110a I need to revive the tablet with riff jtag
@enproceso94 Hi! Here's the link: inside the Lenovo.ru forum !
Good luck!
Hi, I have a bricked I337 and I would like to have some opinions before I give up trying to fix it.
Here is a short version of what I have done.
The phone came to me with null IMEI which I was trying to fix. After trying several tools, the phone became dead, no boot, nothing. At this point I went for a JTAG solution. JTAG software detected it well, and repair procedure was successfull as reported by JTAG software, phone was still dead.
With the help of the JTAG software programmer I got an M919 full dump which I tried to write to phone, after 4 hours of writing the dump, battery completely died at 95% of writing. I recharged battery and after that moment have been unable to connect with phone via JTAG. JTAG software detects its hardware ID but can't initialize phone for writing.
I have read every unbrick thread from other phones, have tried QPST with many files I have found on the way and all I get are errors. So I have been unable to communicate with phone.
Is this finally a faulty phone? Have anyone have another idea?
y3kt said:
Hi, I have a bricked I337 and I would like to have some opinions before I give up trying to fix it.
Here is a short version of what I have done.
The phone came to me with null IMEI which I was trying to fix. After trying several tools, the phone became dead, no boot, nothing. At this point I went for a JTAG solution. JTAG software detected it well, and repair procedure was successfull as reported by JTAG software, phone was still dead.
With the help of the JTAG software programmer I got an M919 full dump which I tried to write to phone, after 4 hours of writing the dump, battery completely died at 95% of writing. I recharged battery and after that moment have been unable to connect with phone via JTAG. JTAG software detects its hardware ID but can't initialize phone for writing.
I have read every unbrick thread from other phones, have tried QPST with many files I have found on the way and all I get are errors. So I have been unable to communicate with phone.
Is this finally a faulty phone? Have anyone have another idea?
Click to expand...
Click to collapse
Wow, sorry to hear this. the battery went dead before jtag finished? ouch. QPST will not help for this, a phone will still boot with no IMEI, this is not good, may want to start a warranty ticket on it. I have a jtag box, so there is a release update for the G4 for it? I did not know this, haven't check in awhile, pull the battery for a good while, replace and charge all the way, and give it one more shot. Sorry bro.
TheAxman said:
Wow, sorry to hear this. the battery went dead before jtag finished? ouch. QPST will not help for this, a phone will still boot with no IMEI, this is not good, may want to start a warranty ticket on it. I have a jtag box, so there is a release update for the G4 for it? I did not know this, haven't check in awhile. pull the battery for a good while, charge all the way, and give it one more shot. Sorry bro.
Click to expand...
Click to collapse
This is exactly what I didn't want to hear :crying:
I have used Riff as JTAG solution.
Unfortunately warranty is not an option for me so I will pull the battery for a couple of days before I try again. At this point it seems is really dead.
I have found many files for QPST that are supposed to do everything to a dead phone, even a command line utility for the same purpose, with some hex and mbn files, but as I said they all failed, it seems to me that eMMC chip is not working at all.
I'll keep you updated if I ever find a way to fix this phone.
y3kt said:
This is exactly what I didn't want to hear :crying:
I have used Riff as JTAG solution.
Unfortunately warranty is not an option for me so I will pull the battery for a couple of days before I try again. At this point it seems is really dead.
I have found many files for QPST that are supposed to do everything to a dead phone, even a command line utility for the same purpose, with some hex and mbn files, but as I said they all failed, it seems to me that eMMC chip is not working at all.
I'll keep you updated if I ever find a way to fix this phone.
Click to expand...
Click to collapse
I did not know this, I will keep that in mind for future ref. Really hope you get it going.
Please read forum rules before posting
Questions and help issues go in Q&A and help sections
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
y3kt said:
Hi, I have a bricked I337 and I would like to have some opinions before I give up trying to fix it.
Here is a short version of what I have done.
The phone came to me with null IMEI which I was trying to fix. After trying several tools, the phone became dead, no boot, nothing. At this point I went for a JTAG solution. JTAG software detected it well, and repair procedure was successfull as reported by JTAG software, phone was still dead.
With the help of the JTAG software programmer I got an M919 full dump which I tried to write to phone, after 4 hours of writing the dump, battery completely died at 95% of writing. I recharged battery and after that moment have been unable to connect with phone via JTAG. JTAG software detects its hardware ID but can't initialize phone for writing.
I have read every unbrick thread from other phones, have tried QPST with many files I have found on the way and all I get are errors. So I have been unable to communicate with phone.
Is this finally a faulty phone? Have anyone have another idea?
Click to expand...
Click to collapse
i have the same problem but i need an imge file to write it im my device (m919) do u have one?
shadigsm said:
i have the same problem but i need an imge file to write it im my device (m919) do u have one?
Click to expand...
Click to collapse
Yes, I do have an M919 dump image from a working phone you can use.
Here you have the link http://jtagbox.com/downloads/m919/M919.rar
y3kt said:
Hi, I have a bricked I337 and I would like to have some opinions before I give up trying to fix it.
Here is a short version of what I have done.
The phone came to me with null IMEI which I was trying to fix. After trying several tools, the phone became dead, no boot, nothing. At this point I went for a JTAG solution. JTAG software detected it well, and repair procedure was successfull as reported by JTAG software, phone was still dead.
With the help of the JTAG software programmer I got an M919 full dump which I tried to write to phone, after 4 hours of writing the dump, battery completely died at 95% of writing. I recharged battery and after that moment have been unable to connect with phone via JTAG. JTAG software detects its hardware ID but can't initialize phone for writing.
I have read every unbrick thread from other phones, have tried QPST with many files I have found on the way and all I get are errors. So I have been unable to communicate with phone.
Is this finally a faulty phone? Have anyone have another idea?
Click to expand...
Click to collapse
Hi, I was wondering if you got your problem solved, I too have a Galaxy S4 M919 which came to my shop also with IMEI null, I also tried to repair it with RIFFBOX and the phone is dead now. I want to know if you repaired your phone and how you did it. Thank you very much. I also tried the M919 full dump you posted but the riffbox wont recognize it.
frankjasmin said:
Hi, I was wondering if you got your problem solved, I too have a Galaxy S4 M919 which came to my shop also with IMEI null, I also tried to repair it with RIFFBOX and the phone is dead now. I want to know if you repaired your phone and how you did it. Thank you very much. I also tried the M919 full dump you posted but the riffbox wont recognize it.
Click to expand...
Click to collapse
Hi, yes, I did repair the phone with RIFF BOX and a dump from a working phone the RIFF BOX programmer sent me.
y3kt said:
Yes, I do have an M919 dump image from a working phone you can use.
Here you have the link http://jtagbox.com/downloads/m919/M919.rar
Click to expand...
Click to collapse
Wow, they usually don't do that, keep that puppy in a safe location
Good deal.
y3kt said:
Hi, yes, I did repair the phone with RIFF BOX and a dump from a working phone the RIFF BOX programmer sent me.
Click to expand...
Click to collapse
Can you share the dump for the I337?
I'm having the same problem with my S4.
Thanks a lot...
I'm am in a loop, how do I flash from odin?
realgadawg said:
I'm am in a loop, how do I flash from odin?
Click to expand...
Click to collapse
You don't need to use ODIN to fix a boot-loop, just use the 3-button combo to go into recovery and flash a backup or a ROM (Following proper wiping steps).
y3kt said:
Hi, yes, I did repair the phone with RIFF BOX and a dump from a working phone the RIFF BOX programmer sent me.
Click to expand...
Click to collapse
can you share a working link with the dump for m919 please i need one to repair my dead i337
I have a RIFF BOX. I have an M919 here that is completely dead. I tried 3 P.C.'s that won't even detect it. RIFF doesn't see it either. Any ideas on what my options are ? This is driving me crazy, please help
DELETED
4llerbuntu said:
Hello.
PLEASE HELP ME.
I totally bricked my device. completely dead. i wiped the wrong partitions in fastboot, now it won't get detected at all. it won't even come on.
I'm in a country where its not possible to send it in to Asus for repairs.
computer still sees it as Qualcomm HS-USB QDLoader 9008
but i don't have the necessary tools or files to recover it. PLEASE HELP ME>.
Click to expand...
Click to collapse
Start saving money for new phone :^)
BTW just out of curiosity, what did you wipe?
DELETED
does your phone boot
4llerbuntu said:
The firmware partitions, modem, hyp, sbl1, recovery.
Forgot to flash them back before reboot.
Ive since learnt one can recover with QPST and some files. Problem is i cant find them for Asus.
Click to expand...
Click to collapse
you didn't wipe aboot, abootbak, hypbak? right? Our phone has a backup partition for each partition (abootbak, hypback, sbl1bak, modembak, etc), asus included these, so there must be some way to use them to unbrick. Are you able to reboot to fastboot mode? ( i guess not, but still to confirm)
You can unbrick with QFIL ONLY if you manage to find your device's RAM IMAGE (usually MPRxxxx.mbn) and BOOT IMAGE (usually xxxx_msimage.mbn). Other flash files are included in asus fota, only these two are not. @shakalaca might help to find these files or the entire service ROM. I have been searching for asus service but to no avail . I have flashed many lenevo and xiomi phones with QFIL. Here's is a very nice guide http://www.androidbrick.com/unbrick...-you-have-the-right-kind-of-rom-qhsusb_dload/
You can request for ZF2 laser's service ROM on that website/blog. GSM FORUM is also a good forum to request service ROMs
DELETED
mohamedelkholy said:
does your phone boot
Click to expand...
Click to collapse
No it doesn't boot. It won't even power on
But it still gets detected as Qualcomm device when plugged in to pc
4llerbuntu said:
No i didnt wipe those.
Will the MPRxxx.mbn and msimage.mbn for another phone but similar processor and chipset work? I found those for MSM8916 for another device and im hoping i can use those.
Click to expand...
Click to collapse
I never cross flashed ram image. Be patient. Don't flash other device's ram image, it may worsen conditions. Keep this as the final solution, but NOT NOW. Also, you need boot image (.mbn) too.
DELETED
DELETED
deleted
Deleted
deleted
Deleted
Deleted
4llerbuntu said:
hmmn, i'm so sad. so nobody is willing to help me at all?
Click to expand...
Click to collapse
not really, I think we're all (ok, just me) don't have that knowledge to help you, or simply can't
4llerbuntu said:
i always assumed all the people who post on this board had the device.
Click to expand...
Click to collapse
Yes, all people there should have laser, and no, i dont have your type, and someone maybe just lurking around, want to buy this laser phone if they feel like it
4llerbuntu said:
Surely i can't be the only person who will ever have this problem.
Click to expand...
Click to collapse
Yes, me too, I think someone will do this thing, don't know why, just feel like it?
4llerbuntu said:
i hope someone is willing to help when it happens to another person.
Click to expand...
Click to collapse
I'm hope we got that knowledge too
4llerbuntu said:
Maybe i should just give up. i'm so down right now.
alright bye.
Click to expand...
Click to collapse
Sorry to hear that
Sent from my ASUS_Z00RD using XDA Labs
4llerbuntu said:
computer still sees it as Qualcomm HS-USB QDLoader 9008
but i don't have the necessary tools or files to recover it. PLEASE HELP ME>.
Click to expand...
Click to collapse
Are you sure msimage is same as gpt? I have attached my ze550kl msm8916 gpt dump. Seems there are three- gpt, gpt1, and gpt2. Try your luck with each one by one.
And please stick to one thread, b7mping the forum is not a solution to your problem. Update your OP by mentioned.ing the workarounds you have tried till now and useful links you have visited for fixing the issue. I know a friend who is a mobile repairer. He might have the service rom for your device. I am waiting for his reply
sziraqui said:
Are you sure msimage is same as gpt? I have attached my ze550kl msm8916 gpt dump. Seems there are three- gpt, gpt1, and gpt2. Try your luck with each one by one.
And please stick to one thread, b7mping the forum is not a solution to your problem. Update your OP by mentioned.ing the workarounds you have tried till now and useful links you have visited for fixing the issue. I know a friend who is a mobile repairer. He might have the service rom for your device. I am waiting for his reply
Click to expand...
Click to collapse
Thank you. I will do that
4llerbuntu said:
Hello.
PLEASE HELP ME.
I totally bricked my device. completely dead. i wiped the wrong partitions in fastboot, now it won't get detected at all. it won't even come on.
I'm in a country where its not possible to send it in to Asus for repairs.
computer still sees it as Qualcomm HS-USB QDLoader 9008
but i don't have the necessary tools or files to recover it. PLEASE HELP ME>.
Click to expand...
Click to collapse
Read this and see if any if it applies.
www.androidbrick.com/unbrick-recover-your-dead-lg-g3-g2-all-variants
I'm not sure how the tool works, but maybe you can pull your backups and write back your partitions from the backup.
Sent from my ASUS_Z00TD using Tapatalk
Mods please help close this thread. ........
Hi guys!
I would just like to start by apologizing for making another thread about a bricked note4, however I have read about so much I don't know which advice to go with anymore. I'm also a complete novice when it comes to this.
So long story short, my note 4 started playing up and lagging, eventually not turning back on at all. After endless attempts using odin and flashing what I seemed to have thought was the right firmware, it whittled down to about 1 in 5 attempts of trying to enter download mode (using the buttons) on the phone actually working. Now its completely bricked...no power, no download mode, nothing!
Just like to reiterate, I'm a complete novice,sorry if I'm not making sense, my knowledge doesn't go further than articles and google!
I have tried using kies to recover my phone and it cant recognize it...
I have read about using adb to get my phone into download mode, but I couldn't understand the explanation given well enough to use it...
I bought a 16gb micro sd card and have tried writing an unbrick image to it but I get no response off my phone, also tried another file, possibly sdc? cdc? cant quite remember, but that failed too.
I don't even know if the files I'm using are correct, I got them from a forum on here.
I'm at a loss!
The only hope I have left is if someone is able tell me if any steps I have tried are correct, and possibly provide me with the correct unbrick image?
Also, when I plug my phone into my computer via usb, there is a noise that sounds but nothing else happens, don't know if these means anything. As far as I'm aware I also have correct drivers installed.
Sorry about the long explanation!
Any help is greatly appreciated!
Thanks in advance.
Lucy.
Only logical result from your explanation is you have a hardware problem.
I dont think you are gonna be able to solve it with software...
Time for service visit i guess..
Turkawa said:
Only logical result from your explanation is you have a hardware problem.
I dont think you are gonna be able to solve it with software...
Time for service visit i guess..
Click to expand...
Click to collapse
Thanks for the reply!
I hope that's not the case forgot to mention,when I plug my phone into a computer and go into device manager, it shows qhsusb_bulk...if this means anything to you?
Lucyhenn123 said:
Thanks for the reply!
I hope that's not the case forgot to mention,when I plug my phone into a computer and go into device manager, it shows qhsusb_bulk...if this means anything to you?
Click to expand...
Click to collapse
Nope.. I have no idea.. Sorry
Try the sd recovery method .
First you can try to flash the pit partion .
You can find that on xda .
Just search for note 4 pit files.
Download the n910f pit file with correct csc.
TRY flashing via download mode.
Try flashing .
Use this guide for using sd card to get into download mode if you cant access download mode
There is a method for http://cloud.tapatalk.com/s/57e756f41dc6e/read me for brick fix.txt
Reporting via N910G
Hi there. I was on stock firmware when the OTA came. I did not installed for a while but when I did my phone went completely dead. I cannot boot into the bootloader nor the recovery. I cannot get fastboot to work. The only hope I have is when I connect it to Windows PC it recognizes it as Qualcomm HS-USB QDLoader 9008 (COM 3). After some research I found that I can do a blankflash, but i cannot find any blankflash files for my phone. So my question is - Is there any way to generate singleimage.bin (for blankflash) or any other way to recover it? Thank you!
Got the same problem. until now no blankflash files available, i guess. Only way is by jtag box. i tried with loader.img for moto x style but it doesnt work for moto x play.
I have the same problem, no blankflash files available until now?
alfafc said:
I have the same problem, no blankflash files available until now?
Click to expand...
Click to collapse
No...
I also have hard brick my phone. I want to get it fixed from this site, is this repair site legit : https://www.aryk.tech/2017/11/moto-x-play-unbrick-solutions.html?m=1
Cooro said:
I also have hard brick my phone. I want to get it fixed from this site, is this repair site legit : https://www.aryk.tech/2017/11/moto-x-play-unbrick-solutions.html?m=1
Click to expand...
Click to collapse
They are frauds.. Many have paid them and got screwed up.. Only way is to do Jtag Flashing or to change the Mother Board (much expensive)
No it is not legit I already got the files from them try my files and tell me if it works for you...also upload it in the global form if working
alwyn naresh said:
No it is not legit I already got the files from them try my files and tell me if it works for you...also upload it in the global form if working
Click to expand...
Click to collapse
It won't work for sure.. The whole project was sponsored by a guy in Hard bricked Moto X Play telegram group created by us.. The only way to fix it is Jtag flashing.. It may cost you around INR 1000.
How to approach jtag?
alwyn naresh said:
How to approach jtag?
Click to expand...
Click to collapse
Below is the address and contact no.. Call him and courier the device.
OMKAR SHINDE
Address
Shop No.2, Shree Datta Apts, Opposite Bramha Garden,
Near Veer Tanaji Ganpati Mandir,
Manikbaug, Pune - 411 051.
Mobile- +919850152245
[email protected]
Thank you so much. It is safe right.they will return the mobile right? Also I got all the unbrick files from ark but none is working any ideas on that? I got qfil files then blank flash files then loader file ...if I send the file to you do you think you can check them for me to see if it works....
alwyn naresh said:
Thank you so much. It is safe right.they will return the mobile right? Also I got all the unbrick files from ark but none is working any ideas on that? I got qfil files then blank flash files then loader file ...if I send the file to you do you think you can check them for me to see if it works....
Click to expand...
Click to collapse
I myself got it fixed from there.. He had fixed more than 200 devices by now.. He even receives devices from abroad.
Thank you very much sir.
alwyn naresh said:
Thank you very much sir.
Click to expand...
Click to collapse
You're welcome buddy.. Just don't waste time on blank flash files.. It just won't work as it isn't digitally signed by Motorola.. Get it fixed from Pune.. That's the only possible solution as of now.. Else you'll have to change the Mother Board..
Hello, after restoring the official firmware and working perfectly the phone, an OTA update appeared, small, I gave it to install as other times ... and from that moment the phone with the black screen.
It seems I'm not the only one, is there any way to revive it?
loparaan said:
Hello, after restoring the official firmware and working perfectly the phone, an OTA update appeared, small, I gave it to install as other times ... and from that moment the phone with the black screen.
It seems I'm not the only one, is there any way to revive it?
Click to expand...
Click to collapse
My daughters has just now done this, no lights, no boot, nothing
Anyway to fix it?
robneymcplum said:
My daughters has just now done this, no lights, no boot, nothing
Anyway to fix it?
Click to expand...
Click to collapse
There is nothing to do ... send it to Motorola and pay the settlement, which is not worth it, they asked me € 195 (according to them, you had to change the motherboard) ... so thrown away.
If it had been to mess with him, but after an official OTA. Never again Motorola.
loparaan said:
There is nothing to do ... send it to Motorola and pay the settlement, which is not worth it, they asked me € 195 (according to them, you had to change the motherboard) ... so thrown away.
If it had been to mess with him, but after an official OTA. Never again Motorola.
Click to expand...
Click to collapse
Jeez... I'm glad it happened when she was using it as a spare phone than me when it was my main phone! Thats a definite NEVER buying a motorola again, even if it was cheap at the time.
My Moto x play completely dead
My moto x play completely not working, I can't able to charge or switch Mobile.
I tried all flashmde or different types of to install., but my mobile was not detected.
But when I connect pc, its showing only Qualcomm name.
Also I tried qflash mode, mobile detecting Qualcomm connected details in my pc but its expecting content or stream file type of firmware stock file.
Can you assist any one where we can get moto x play qflash support file.
Thanks,
Rajesh Kumar R
9962038582