Troubles with touch screen XT1572 - X Style (Pure) Q&A, Help & Troubleshooting

Hello everyone, I commented that some time ago I started to miss the touch of xt1572 but only in the line below where is the square, the arrow and the circle , first began to fail until it suddenly stopped working , now surprises me is that when I use the touchscreen or any application that need to squeeze in that area works perfectly , which led me to suspect that problem is soft , not hard , I flashed with 5.1.1 ROM and followed with the problem , then with 6.0 and was the same, then went back to 5.1.1 . Now someone who knows more , I could tell that it could be ?. At the moment solve it or putting it on its side or the launcher bar when I get down under the window and return to the desktop. Anyone know if the launcher bar can add the three buttons ?. Sorry but my english is very bad. I used the google translator, I hope you can understand me. Thank you for reading this post

pindonga123 said:
Hello everyone, I commented that some time ago I started to miss the touch of xt1572 but only in the line below where is the square, the arrow and the circle , first began to fail until it suddenly stopped working , now surprises me is that when I use the touchscreen or any application that need to squeeze in that area works perfectly , which led me to suspect that problem is soft , not hard , I flashed with 5.1.1 ROM and followed with the problem , then with 6.0 and was the same, then went back to 5.1.1 . Now someone who knows more , I could tell that it could be ?. At the moment solve it or putting it on its side or the launcher bar when I get down under the window and return to the desktop. Anyone know if the launcher bar can add the three buttons ?. Sorry but my english is very bad. I used the google translator, I hope you can understand me. Thank you for reading this post
Click to expand...
Click to collapse
You could set your navigation bar height to 0, that will make the buttons disappear and use a slim pie control

Pyramid Head said:
You could set your navigation bar height to 0, that will make the buttons disappear and use a slim pie control
Click to expand...
Click to collapse
Thank for reply my post. Can you help me with set my navigation bar height to 0?. I was looked for it in the net but I didnt understand nothing about it. I saw pure code in java I think, that I dont know where I have to put it. I try with xtended NavBar but it requiers Xposed framewok. It dont work on my phone

pindonga123 said:
Thank for reply my post. Can you help me with set my navigation bar height to 0?. I was looked for it in the net but I didnt understand nothing about it. I saw pure code in java I think, that I dont know where I have to put it. I try with xtended NavBar but it requiers Xposed framewok. It dont work on my phone
Click to expand...
Click to collapse
Do you have root? and Which rom are you using?

Pyramid Head said:
Do you have root? and Which rom are you using?
Click to expand...
Click to collapse
Thank for help me. I could fix it. I red some post from here XDA, I rooted my phone, and could install xposed for lollipop and after gravity box. A excellent app. I configured it and launch a pie. I dont know if it is the exact term in english. Thank Pymarid for help me. It is difficult understand my wrong english ja ja

pindonga123 said:
Thank for help me. I could fix it. I red some post from here XDA, I rooted my phone, and could install xposed for lollipop and after gravity box. A excellent app. I configured it and launch a pie. I dont know if it is the exact term in english. Thank Pymarid for help me. It is difficult understand my wrong english ja ja
Click to expand...
Click to collapse
happy you solved your problem by the way you can set the navbar height to 0 (if you havent already) by installing a module for xposed called 3 dot mod, just enable it

Thank for the advice and thank for help me

Related

M2D technical support ~~ Please help me

Hi there, i am a chinese user, first time when i install the M2D 1st or 2nd update, it is support to read chinese language... but after i install the update to 12, 13, 14 ... it can not read chinese, it just become uncode... is anyone can teach me how to solve it ? thanks
second question is, M2D's sensitive is abit slow sometime, is it possible to change it's sensitive faster like TouchCube from reg. edit ??? thanks
lantisy said:
Hi there, i am a chinese user, first time when i install the M2D 1st or 2nd update, it is support to read chinese language... but after i install the update to 12, 13, 14 ... it can not read chinese, it just become uncode... is anyone can teach me how to solve it ? thanks
second question is, M2D's sensitive is abit slow sometime, is it possible to change it's sensitive faster like TouchCube from reg. edit ??? thanks
Click to expand...
Click to collapse
U can rename "Manila2D.exe.0409.mui" and "HH_0409_WeatherCities.xml" to
"Manila2D.exe.0804.mui" and "HH_0804_WeatherCities.xml"
hi...but after i change it to 0804, the softkey is disaapear, and other words in english, even in chinese can not be seen on the screen...
please assist

[L5] CRT Effect for L5.

Hi, i'm from Poland and sorry to my very bad english (is not translate to google!)
I'm new in the forum, my name is Artur hello.
Please send me working mod CRT old TV Effect for L5. This effect is in the xperia J
This does not work, error and Security Code in the phone:
http://forum.xda-developers.com/showthread.php?t=2103944
Emergency mode + KDZ a working phone, have a fun
If not this forum, please move to the right place
Please understand me
PermDude said:
Hi, i'm from Poland and sorry to my very bad english (is not translate to google!)
I'm new in the forum, my name is Artur hello.
Please send me working mod CRT old TV Effect for L5. This effect is in the xperia J
This does not work, error and Security Code in the phone:
http://forum.xda-developers.com/showthread.php?t=2103944
Emergency mode + KDZ a working phone, have a fun
If not this forum, please move to the right place
Please understand me
Click to expand...
Click to collapse
at this time i think there is no working crt effect for L5 the tweakbox crt effect only works for samsung devices since the tweakbox was first oriented only to samsung devices and you still had to install custom libs for that effect... so.. no working crt effect for our device :crying: :crying:
i've searched a lot and tried many things since i rooted my device that was the first thing in my to do list when root...
anyway i hope someone can make a crt effect for us.
Thank you very much
Maybe used to be to our phone later

[Q&A] [Guides & Links] THE GALAXY S5 UNIFIED MODS THREAD

Q&A for [Guides & Links] THE GALAXY S5 UNIFIED MODS THREAD
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Guides & Links] THE GALAXY S5 UNIFIED MODS THREAD. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Remove Quickconnect & Sfind from Pulldown
Hello,
Please can anyone help me remove Quickconnect & Sfind from Pulldown --> Galaxy I9505 (lollippop), i am rooted but i cant figure out how to edit the SystemUI.apk (decompile & stuff).
Thank You
SyShade said:
Hello,
Please can anyone help me remove Quickconnect & Sfind from Pulldown --> Galaxy I9505 (lollippop), i am rooted but i cant figure out how to edit the SystemUI.apk (decompile & stuff).
Thank You
Click to expand...
Click to collapse
You're going to need to do a bunch of reading, then more, then more. It's not the hardest thing to do, but removing stuff like that can be tricky. You're better off flashing a custom rom for now. There are plenty of threads with a ton of info here though.
Hello
metalfan78 said:
You're going to need to do a bunch of reading, then more, then more. It's not the hardest thing to do, but removing stuff like that can be tricky. You're better off flashing a custom rom for now. There are plenty of threads with a ton of info here though.
Click to expand...
Click to collapse
i did managed to modd the SytemUi but wen i put it back on to the phone it crashed the SystemUi, couldn't recover even whith restore and original file, reinstaled the rom, still buggiing me alot those buttons, the lollippop for the s4 was released rather a short time ago. so anyone wants to help me get rid of those buttons ( i have a problem whith "Everyting should be almost perfect")
Thank you for your time
You should check out a program called winmerge, I use it all the time when modding. It lets you compare files to find what you need.
SyShade said:
Hello,
Please can anyone help me remove Quickconnect & Sfind from Pulldown --> Galaxy I9505 (lollippop), i am rooted but i cant figure out how to edit the SystemUI.apk (decompile & stuff).
Thank You
Click to expand...
Click to collapse
Decompile SystemUI.apk and go to values/dimens
And change this
Code:
<dimen name="finder_connect_layout_height">57.0dip</dimen
To this
Code:
<dimen name="finder_connect_layout_height">0.0dip</dimen
increasing ringtone
Hi guys ive just regained root on firmware G900IDVU1ANK1 and i am trying to remove the annoying increasing ringtone. I have followed this guide http://forum.xda-developers.com/showthread.php?t=2733001 but the stupid thing still rings ascending. I noticed that there is only 1 instance of this line - Landroid/media/AudioManager;->setStreamVolume(III)V where as the thread says there should be 2. I used the SecTeleService apk from an earlier version rom (NE1) but it just crashes.
Any help is appreciated.
Thanks
Daniel.
amigo24 said:
Hi guys ive just regained root on firmware G900IDVU1ANK1 and i am trying to remove the annoying increasing ringtone. I have followed this guide http://forum.xda-developers.com/showthread.php?t=2733001 but the stupid thing still rings ascending. I noticed that there is only 1 instance of this line - Landroid/media/AudioManager;->setStreamVolume(III)V where as the thread says there should be 2. I used the SecTeleService apk from an earlier version rom (NE1) but it just crashes.
Any help is appreciated.
Thanks
Daniel.
Click to expand...
Click to collapse
If you are doing this for Android L, the file to modify is now Telecom.apk and the guide is near the bottom of post #4 in my home guide thread.
tdunham said:
If you are doing this for Android L, the file to modify is now Telecom.apk and the guide is near the bottom of post #4 in my home guide thread.
Click to expand...
Click to collapse
No, im still running 4.4.2, rom is NJ1 build
edit
does not work vibration
keeping back
kill does not vibrate
thanks
How can I change an option in SecSettings.apk to redirect to another option?
Currently, Power Saving mode uses PowerSavingModeSettingsActivity and I want it to use PowerSavingModeSettings2014Activity. It has a few more options than what Settings currently uses. Thanks.
evilvoice said:
How can I change an option in SecSettings.apk to redirect to another option?
Currently, Power Saving mode uses PowerSavingModeSettingsActivity and I want it to use PowerSavingModeSettings2014Activity. It has a few more options than what Settings currently uses. Thanks.
Click to expand...
Click to collapse
Search the entire smali folder with a tool like fileseek for PowerSavingModeSettingsActivity and change where it invokes it to PowerSavingModeSettings2014Activity. This is very simplified and may not work but that is how I would approach it to begin.
Awasome
great work thanks
Ok this will probably be a lengthy question and refers to the incall backgrounds mod. Its also for a sprint note3 lp rom.
The problem is when you select the image it displays briefly until the call connects then it switches back to the stock. When you receive a call it displays the chosen background until you answer it then it reverts back to stock. We have went over and over the instructions and cannot find out where the issue is. I think the issue that needs to be fixed is actually in the fullscreen mod though can someone help please.
https://www.dropbox.com/s/y4xubqtc4nmz6tv/LegacyInCallUI.apk?dl=0
Hi, guys!
Please help me, how i can ADD ficeto.colorpicker in my device? Please, give me the link on add colorpicker.
trylogic said:
Hi, guys!
Please help me, how i can ADD ficeto.colorpicker in my device? Please, give me the link on add colorpicker.
Click to expand...
Click to collapse
Its included in customsettings.
http://forum.xda-developers.com/gal...de-understanding-creating-smali-mods-t2488033
Hi, Guys!
Please tell me how to change the size of the switches in "CustomSettings" or switches in general? Sorry, i can't add scrin.
trylogic said:
Hi, Guys!
Please tell me how to change the size of the switches in "CustomSettings" or switches in general? Sorry, i can't add scrin.
Click to expand...
Click to collapse
The on/off switches are framework-res.apk images I believe and will affect the entire rom, not just customsettings.

After updating the menu button and the back button does not work

Hello there,
Belarus 5.0.1 ROM on my phone was installed. Later, with the coming update (250 MB update) came back key and the menu key to working. light does not burn, buttons not working. I've installed a lot ROM install the kernel but did not improve. Waiting for your assistance in this matter.
I use google translate to translate my English is not very good. Please provide information taking into account that, while you can also help. I will read what you have written on Translate.
Thank you
Türk Arkadaşlar Lütfen Sizlerde yardımcı olun.
Thread will be moved to Q&A Troubleshooting
Sent from my SM-A800F using Tapatalk
Same happened to me and it seems nothing solves it, I am currently using MIUI which has an integrated nav bar, but I cant seem to fix the buttons

[HELP] Touch panel with inverted Y axis

I've broken my screen so i bought anoder one but the new one have a inverted touch panel
EG: if i scroll down it scrolls up etc..
Please help me can someone build a modified kernel or someone knows a metod to invert the Y axis, because i'm a noob , actually im on the last CM OS.
Thanks
Edit: i've found this tutorial but i don't know how to extract the script.bin and edit it, please help me
Now i'm on cm 12.1 please help me
Same Problem with allwinner a20 tablet.
hi,
i also have the same problem like you. found a possible solution here freaktab.com/forum/development-area/android-os-development-discussions/1788-how-to-fix-a-a10-allwinner-ft5x-touch-screen
unfortunately tablet does ignore my changes to script.bin.
tried to swap y and x coordinates in ctp section.
maybe you can also try to have sucess with the script.bin thing.
hope someone can help us to fix our problem.
best regards, harald.

Categories

Resources