i recently tried to install a custom rom in my white coolpad note 3. It was successfully installed but afta booting it , it was stuck on a white screen. i again tried to flash the rom, but same happened again and again.
Now i tried to restore the phone .
i did a factory reset then i wiped the cache , dalvik cache and data and aftawards restored the phone with the backup i had.
aftawards i rebooted the phone, and it came till d coolpad logo and is stuck and doesnt goes beyond it.
And i tried to put stock rom as shown on the page "how to unbrick ur phone" i did it everything as shown.
but at end there was a dialog box showing "error bootload time out"
I think this happened due to the rom prescribed was the rom for "black model"
What Should I do now...
pllzz help me....
I think you have unbricked your device but if not just flash stock firmware via spflashtool . you can find your stock firmware easily just Google it. I have a black cpn3
somewhere in map of CS:GO
Related
Hello
I have a rooted G900H on the stock ROM with the stock recovery installed.
I was going to patch the core.jar using Lucky Patcher so I figured I should make a nandroid backup first, so I booted to recovery only to find out it was the stock recovery. I figured I would go back to normal and then figure it out from there.
I chose the 'reboot to system' option and the phone got stuck at the Samsung logo.
I tried removing the battery and when I booted it up it got stuck again.
I have tried choosing the 'power down' option then turning it on, booting it without the microSD card, rebooting using power and volume down, and removing the battery and replacing the battery with a spare I have but everything leads back to the same - stuck at the Samsung Logo.
I have also tried rebooting to bootloader which also leads to getting stuck at the Samsung Logo.
When I go into the recovery it comes up with the Android Bot with it's body open and "no command" very quickly, before getting to the system recovery.
The last thing I tried was clearing the cache partition then choosing the 'reboot' option. Again, stuck at the Samsung Logo.
On the system recovery it has "Android System Recovery <3e> LRX21T.G900HXXU1BOAD" in red at the top.
If possible, I would really like to avoid having to factory reset or flashing a ROM again.
Thanks
Boot to recovery and clear the caches, see if that gets you back in, if not, flash the same stock ROM over the top of that one, you'll only lose root
Thanks for the reply.
I have tried clearing the caches from the recovery and rebooting but it did not help.
How would I go about reflashing the stock rom without a custom recovery? And where would I get the file?
Thanks
sammobile . com & ODIN
All links and instructions are under the download on sammobiles firmware section of their site, just enter your S5 Model into the firmware section (Free account needed to download)
Or samsung-updates . com
Hey. Sorry, I forgot to reply. Your suggestion worked out. Thanks for the help.
I was able to go back then get a custom recovery. Thanks again./
Nice one
Phone "bricked"? Unable to detect phone via adb, or go to recovery. Suggestions?
Hi,
I was trying to sideload the new MM update over adb. Somehow it got stuck at 49%. So, I rebooted my phone and tried again. MM update was getting stuck at 49% every time.
So, I tried to reboot to recovery to install the update from there. But now, my phone is not going to recovery mode. It just shows me 4 options (Reboot, Install update, Wipe data, Power off). And install update does not allow me to select sd card, so I cant even choose the update.
When I try to boot normally, it just shows the first screen (Lenovo in white, with "powered by android" at the bottom).
I tried connecting to PC, but my phone is not detected by that K3 Note manager tool, or by Pda.net tool. So, I am not sure, what I can even do next.
Solved the problem. Had to flash the whole thing again using SP flash tools and old stock roms. Newer rom was not working for some reason.
Finally on 6.0. Sadly, lost all my settings.
Hey bro tell me how to flash the MM STOCK ROM I got stuck at 49% it shows install failed & gives only option for BACK & when I does the same It goes to Main Recovery screen. I don't know what to do even. Help me please
I basically ended up flashing the full thing from the beginning. See the attached text file for the steps I followed. Finding the tools is easy, just type the tool name on google.
Tools needed:
mt65xx drivers
SP flash tool
Stock rom (only the chinese version has full rom, so you have to download that rom).
After that, you can update the stock rom to marshmallow using the recovery.
Lenovo k3 note bricked. Unable to detect it via pc , On a bootloop , SP flash tool
I replaced recovery from twrp v3.0.0 to stock recovery using its image and my phone is in bootloop and when I boot my phone it shows the first screen . After a lot of research I found its the bootloop.
But the main problem is that SP flash tool cannt detect my phone so I am unable to flash it again and install new recovery in it. I have installed k3 note manager, pda net ,ADB driver and many other but still it's not working.
Can anyone help me out regarding this problem?
Hello everyone,
Basically I tried to flash the original recovery from TWRP (Previously installed with Odin), and after telling me that the installation was successful, I rebooted and then, after the SAMSUNG logo, a black screen appears.
I tried to turn it on from recovery and download, but nothing ..
Some help?
Thanks
You soft bricked. Basically install stock rom and redo do everything again,(such as root ect...)
Thanks, I installed the stock rom and now work?
i was on hackers rom and it was working fine. i was searching for some good kernal and i found one which was for a7000/k3 i thought it will work on my k3 note (k50a40) now aftar flashing that boot.img i rebbot and my device stuck at leneovo logo i try to reboot into recover but nothing happens its just stuck at that logo. so i tought to re flash using sp flash tool. i flashed the rom but now its just showing leneovo logo with no lights on screen. try all optins like download only,fremwere update,flash all+download, even i use that optin format excpt bootloader but still no luck..... by the way i am flashing stock lollipop s112 which i earlier flashed and it was working great.now i have only option format the whole flash but i dont think so that gona help me..please help any one
Hello,
I have got tough nut to crack - T561 so nonQualcom one I bought on ebay.
Generally it is stuck on boot logo. I can get into Download Mode but not into Recovery mode (i know the combo - it simply doesn't work).
It is recocgnized by ODIN so I have tried flashing stock rom - it passes but even stock ROM is stuck on boot logo and doesn't go into Recovery.
I have tried flashing TWRP via ODIN - flashing passes but still cannot get into recovery - what's more there is red exclamation mark in upper left corner of the screen.
After TWRP i can still flash stock ROM and exclamation mark disappears - so it is just a marker of non stock component.
I have simply ran out of ideas. One interesting comment I have found on different device :
Factory resetting and wiping cache removes the conflicting data and allows the device to boot. Flashing via Odin does not wipe the data from the device during the flashing process unless the firmware being flashed has an upgraded/downgraded bootloader.
Click to expand...
Click to collapse
Is there an option to upgrade bootloader in my case so the caches are wiped ?
Or maybe someone has any other idea ?