Database Users

issues After flash TWRP_recovery.img with flashy.apk

Hi. i have a SM-G928G and i update my phone to 6.0.1, after that i rooted the phone, all was perfect before i try to flash TWRP with flashy.apk ( playstore app) ... after the app download and install TWRP i select "reboot", phone reboot but a message is now on the top of the screen " RECOVERY IS NOT SEANDROID ENFORCING" .... the phone stays there for hours.
I tray to flash TWRP recovery.img.tar with odin but after do it the message still there... i try uncheck autoreboot in odin to to manuelly and the autoreboot check for the system do it.
someone can share the stock recovery to flash my phone ??
exist a way to fix it ?
thx !
PS: sorry my english.

S5 G900F stuck in a bootloop

somebody can tell me step by step what to do? I'm stuck in a bootloop and i tried to install the stock firmware with odin but it keeps failing Odin says that after i started it, everything is ok and i get a "pass" in Odin but it just keeps rebooting i only can get into download mode, not into recovery mode And when the phone starts to boot, i just get this black screen with the samsung galaxy S5 on it and in the top corner in blue letters "recovery booting ..." and then it goes black and restart ...
Can anybody help me i'm kinda desperate

Hi, try with pit file check your pm´s

israelicky said:
Hi, try with pit file check your pm´s
Click to expand...
Click to collapse
Whatdo i do with the file? Flash it with odin and then? Do i flash a new rom after it?

i tried to flash it again and used that PIT file but still the same result any other suggestions? Or is my phone ready for the recycle bin? :crying:

Flash it whit the rom

Does it say G900F in download mode?

Odin mode
Product Name : SM-G900F
Current binary : Samsung official
System status : Custom
Reactivation lock (KK) : Off
Knox waranty void : 0x1 (2)
Qualcomm secureboot : Enable (CSB)
Ap survey : S1, T1, A1, A1, P1
Secure download : Enable
UDC start
Thats what it says ...

Sounds like something in DATA is corrupted, which ODIN does not wipe
So flashing ROMs with ODIN won't fix it, you need to wipe the phone
Almost the same thing was happening with another member the other day, using ODIN option "Nand erase all" while flashing the ROM to wipe the phone, and then using KIES3 to recover the firmware was their fix
After Nand erase all, the phone would only enter download mode, KIES3 fixed that with the firmware recovery process
http://www.samsung.com/uk/support/usefulsoftware/KIES/
--
Or you could try flashing TWRP with ODIN, and see if you can get into TWRP recovery first, factory reset from there

I tried to put TWRP on my S5 with odin but that didn't work ...
Now i just flashed the phone with a new rom and with "Nand erase all" ticked and then do a firmware upgrade with "Kies" but unfortunately that didn't worked either :crying:

any other suggestions?

In ODIN, uncheck "Auto reboot"
Flash TWRP
When it completes disconnect USB and remove battery to power off
Replace battery and immediately boot into recovery
Volume Up & Home & Power
ANd you need to add more details other than "It didn't work" or we can't help

Ok i did what you suggested and at first it starts up with this on the screen :
Recovery booting .... (in blue letters)
Set warranty bit: recovery (in yellow letters)
then it just reboots without this text on it but it just keeps rebooting ... i dont get to see any thing else but the samsung galaxy s5 powered by android screen ...

And what does KIES firmware recovery say?

With the kies program i get thesame result ... it just stucks in the bootloop ...

No, what does KIES say when you run the firmware recovery?
I'm going to leave you to it, can't help you when you just keep repeating the same thing "Doesn't work"

Im not home at the moment,i will give it another go when im at home and tell you what it sayw

Ok, i opened Kies and searched for that emergency recovery firmware that you talked about but i don't see a option to select my phone??
Here is a printscreen from kies and my phone connected i download mode ...
http://i1360.photobucket.com/albums/r643/Tom_Mutsaerts/Naamloos2_zpskzwqrxly.jpg

Ok, you may close this topic, i brought the s5 to a repairshop and they are gonna check what the could do ... possible even necessary to replace the touchscreen and lcd according to the salesmen :s

After passed Odin flash "error" when trying to update system

Got a s7edge, g935F that got stuck in loop. ( stock, no root)
After a factory reset it didn't do nothing.
Now I did a Flash using Odin 3.1.3 and with the latest stock for my device from sammobile . The flash indicates pass but when the system reboots I get a short message that Systemupdate is in progress, then a 'error!' screen with a dead android and a bar that freezes @ 25 %
-Stuck.
-I only can get into Download mode. Recovery mode not working.
-Flashed with BL and without
-Tried other ports and cables.
- tried other stocks.
-tried TWRP for alterative recovery but get a protection error (FRP)
- tried Kies and SmartSwitch but they "don't support" this device ….
Any sugestions or fixes .

xxnedxx said:
Got a s7edge, g935F that got stuck in loop. ( stock, no root)
After a factory reset it didn't do nothing.
Now I did a Flash using Odin 3.1.3 and with the latest stock for my device from sammobile . The flash indicates pass but when the system reboots I get a short message that Systemupdate is in progress, then a 'error!' screen with a dead android and a bar that freezes @ 25 %
-Stuck.
-I only can get into Download mode. Recovery mode not working.
-Flashed with BL and without
-Tried other ports and cables.
- tried other stocks.
-tried TWRP for alterative recovery but get a protection error (FRP)
- tried Kies and SmartSwitch but they "don't support" this device ….
Any sugestions or fixes .
Click to expand...
Click to collapse
I had a similar issue where my FRP became locked and wasn't able to boot into System or flash TWRP. What I did was flash a clean build with Nougat instead of Oreo. Once I was able to boot into System and initialize my phone, I enabled developer settings and enabled OEM unlock which unlocked the FRP. I used the BTU firmware of Nougat by the way. Not sure if this will fix the issue for you but it's worth a shot.

heii70 said:
I had a similar issue where my FRP became locked and wasn't able to boot into System or flash TWRP. What I did was flash a clean build with Nougat instead of Oreo. Once I was able to boot into System and initialize my phone, I enabled developer settings and enabled OEM unlock which unlocked the FRP. I used the BTU firmware of Nougat by the way. Not sure if this will fix the issue for you but it's worth a shot.
Click to expand...
Click to collapse
Well it did something Other then just the "error!" message I got before.
Bootloop to "No command:" screen after Passed flash (Nougat) but still o access into Recovery mode
Now lets search from there …..

xxnedxx said:
Well it did something Other then just the "error!" message I got before.
Bootloop to "No command:" screen after Passed flash (Nougat) but still o access into Recovery mode
Now lets search from there …..
Click to expand...
Click to collapse
...

xxnedxx said:
Well it did something Other then just the "error!" message I got before.
Bootloop to "No command:" screen after Passed flash (Nougat) but still o access into Recovery mode
Now lets search from there …..
Click to expand...
Click to collapse
Are you getting the "no command" error when trying to boot into System or Recovery? Also which did you use the "CSC" or "Home_CSC" file when flashing?

heii70 said:
Are you getting the "no command" error when trying to boot into System or Recovery? Also which did you use the "CSC" or "Home_CSC" file when flashing?
Click to expand...
Click to collapse
I still can't get into recovery mode. ( I wish ) so this is happening when Flashing with CSC latest Nougat . (G935FXXU1BPLB_G935FPHN1BPK1_PHN)
I pass Odin but when the system boots It hangs on No command screen also there I cant enter recovery. (same when trying Home_CSC) ( no need for data recovery )
The first post is when I installed the latest Oreo.

xxnedxx said:
I still can't get into recovery mode. ( I wish ) so this is happening when Flashing with CSC latest Nougat . (G935FXXU1BPLB_G935FPHN1BPK1_PHN)
I pass Odin but when the system boots It hangs on No command screen also there I cant enter recovery. (same when trying Home_CSC) ( no need for data recovery )
The first post is when I installed the latest Oreo.
Click to expand...
Click to collapse
Try different firmware from another region and see if you get different results. The last option is to let your battery completely drain over a course of a few days, that will release the FRP lock. Or you can open your phone and reset the battery connection.

heii70 said:
Try different firmware from another region and see if you get different results. The last option is to let your battery completely drain over a course of a few days, that will release the FRP lock. Or you can open your phone and reset the battery connection.
Click to expand...
Click to collapse
Can i do a frp un lock using CF-autoRoot?

xxnedxx said:
Can i do a frp un lock using CF-autoRoot?
Click to expand...
Click to collapse
No cuz the very fact that FRP is locked means you can't flash anything that's not stock.
---------- Post added at 09:42 PM ---------- Previous post was at 09:35 PM ----------
heii70 said:
Try different firmware from another region and see if you get different results. The last option is to let your battery completely drain over a course of a few days, that will release the FRP lock. Or you can open your phone and reset the battery connection.
Click to expand...
Click to collapse
Also when I said "drain", I really meant it. You have to let the battery die to a point where your phone doesn't respond to anything, not to just to when the phone turns off at 0%. If you are even able to turn on the phone for a brief moment, then the battery still isn't drained enough.
---------- Post added at 10:03 PM ---------- Previous post was at 09:42 PM ----------
xxnedxx said:
I still can't get into recovery mode. ( I wish ) so this is happening when Flashing with CSC latest Nougat . (G935FXXU1BPLB_G935FPHN1BPK1_PHN)
I pass Odin but when the system boots It hangs on No command screen also there I cant enter recovery. (same when trying Home_CSC) ( no need for data recovery )
The first post is when I installed the latest Oreo.
Click to expand...
Click to collapse
G935FXXU1BPLB_G935FPHN1BPK1_PHN is Marshmallow, not Nougat. Here are all the firmware versions for PHN that are Nougat and Oreo, try them all and see if one of them works: https://updato.com/firmware-archive...ugat(Android+7.0),Oreo(Android+8.0.0)&rpp=100 . If not, you are going to have to go with draining the battery.

heii70 said:
No cuz the very fact that FRP is locked means you can't flash anything that's not stock.
---------- Post added at 09:42 PM ---------- Previous post was at 09:35 PM ----------
Also when I said "drain", I really meant it. You have to let the battery die to a point where your phone doesn't respond to anything, not to just to when the phone turns off at 0%. If you are even able to turn on the phone for a brief moment, then the battery still isn't drained enough.
---------- Post added at 10:03 PM ---------- Previous post was at 09:42 PM ----------
G935FXXU1BPLB_G935FPHN1BPK1_PHN is Marshmallow, not Nougat. Here are all the firmware versions for PHN that are Nougat and Oreo, try them all and see if one of them works: https://updato.com/firmware-archive...ugat(Android+7.0),Oreo(Android+8.0.0)&rpp=100 . If not, you are going to have to go with draining the battery.
Click to expand...
Click to collapse
Txs for feedback. Lets try some more flashing form that url . Already did a bunch from sammobile

Still no luck with the firmware's provided by that link.
Some of them Pass Odin Flash without error but when System reboots its ( using AP,BL,CP,CSC)
Blue screen (after short initialize 25 or 32% >> erase >> reboot>>)
- error!
or
- No command
Some of them Fail Odin with message In download mode screen:
- SW REV. CHECK FAIL (BOOTLOADER) DEVICE 2 BINARY 1
So I got a non rooted phone never opened development mode that just crashed into a BootLoop
After Wipe data en Catch attempt>>> "brick"
No recovery mode possible . Only download mode.
In download mode SmartSwitch and Kies see device connected but are not "supporting it" so emergency recovery = no option
"zucht"

heii70 said:
Try different firmware from another region and see if you get different results. The last option is to let your battery completely drain over a course of a few days, that will release the FRP lock. Or you can open your phone and reset the battery connection.
Click to expand...
Click to collapse
Unplugged the battery. Didnt do nuttin on FRP lock.
Still no luck even with some guyz online service.
Loads off error passed by. Stil no luck getting into recovery or getting a firmware installed.

xxnedxx said:
Unplugged the battery. Didnt do nuttin on FRP lock.
Still no luck even with some guyz online service.
Loads off error passed by. Stil no luck getting into recovery or getting a firmware installed.
Click to expand...
Click to collapse
Did you make sure to press and hold the power button for a minute or two to drain any residual electricity after unplugging the battery? Try that and see if that helps.

heii70 said:
Did you make sure to press and hold the power button for a minute or two to drain any residual electricity after unplugging the battery? Try that and see if that helps.
Click to expand...
Click to collapse
Yup Still locked

Screenshot

@xxnedxx Any progress? I have the exact same problem on my G930F. Even dis- and reconnected the battery.

I have the same problem, S7 Edge (G935F) Never ending loop, restarts on 25~32% and goes to no command. Tried different firmwares for 8.0 and I even located the PDA correct firmware, still no luck with it. Recovery doesnt work when I try to enter it I get the error code lines on the black screen. This problem occurred when I tried upgrading from nougat to oreo 8.0 and it went to neverending loop.

xxnedxx said:
Got a s7edge, g935F that got stuck in loop. ( stock, no root)
After a factory reset it didn't do nothing.
Now I did a Flash using Odin 3.1.3 and with the latest stock for my device from sammobile . The flash indicates pass but when the system reboots I get a short message that Systemupdate is in progress, then a 'error!' screen with a dead android and a bar that freezes @ 25 %
-Stuck.
-I only can get into Download mode. Recovery mode not working.
-Flashed with BL and without
-Tried other ports and cables.
- tried other stocks.
-tried TWRP for alterative recovery but get a protection error (FRP)
- tried Kies and SmartSwitch but they "don't support" this device ….
Any sugestions or fixes .
Click to expand...
Click to collapse
hello i had this problem while i was trying to root and unlock the phone
this is what i did hopefully it works for you too
1* download the latest firmware according to your android version
use odin3 v3.13 patched version
2* boot into boot loader
chose Bl on odin and the pit file , uncheck re-partition
and press start , that will get your phone unbrick then flash the ap file and then cp and csc that shoud do the job :good:

Efrencalvario said:
hello i had this problem while i was trying to root and unlock the phone
this is what i did hopefully it works for you too
1* download the latest firmware according to your android version
use odin3 v3.13 patched version
2* boot into boot loader
chose Bl on odin and the pit file , uncheck re-partition
and press start , that will get your phone unbrick then flash the ap file and then cp and csc that shoud do the job :good:
Click to expand...
Click to collapse
sorry my english.
the same for me
all o.k. but i flashed AP,phone say erasing 25%,off,and on,No command
#fail to open recovery_cause(No such file or directory)#
#Reboot Recovery Cause is [UNKOWN]#
No support SINGLE-SKU
File-Based OTA
Supported API:3
# MANUAL MODE V1.0.0#
E:[libfs_mgr]Blob verification failed:255
E:failed setting up dirty target
failed to mont '/system'(Bad file descriptor)
......
any idea?

I have exactly the same problem with G930FD S7, I dont even have FRP on still whenever I flash stock rom through odin
phone say erasing 25%,off,and on,No command
#fail to open recovery_cause(No such file or directory)#
#Reboot Recovery Cause is [UNKOWN]#
No support SINGLE-SKU
File-Based OTA
Supported API:3
# MANUAL MODE V1.0.0#
E:[libfs_mgr]Blob verification failed:255
E:failed setting up dirty target
failed to mont '/system'(Bad file descriptor)
I was able to flash TWRP and custom ROMS are working fine but no official ODIN,
---------- Post added at 11:53 PM ---------- Previous post was at 11:44 PM ----------
Efrencalvario said:
hello i had this problem while i was trying to root and unlock the phone
this is what i did hopefully it works for you too
1* download the latest firmware according to your android version
use odin3 v3.13 patched version
2* boot into boot loader
chose Bl on odin and the pit file , uncheck re-partition
and press start , that will get your phone unbrick then flash the ap file and then cp and csc that shoud do the job :good:
Click to expand...
Click to collapse
Can you elaborate further where to find the pit file ?

S3 neo GT-I9301I wont boot after wrong firmware

Hi
How are you?
I have flashed my phone with wrong firmware accidentally.
This the firmware i have used
https://androidfilehost.com/?fid=746163614322275276
I can only go to Download mode (No recovery mode or boot)
but when i go to download mode the product name is GT-I9300I
Any help

I manage to solve the product name in Download Mode and now it's showing GT-I9301I
but the phone is still not boot with booloop and no recovery mode.
Any help

alaa92 said:
I manage to solve the product name in Download Mode and now it's showing GT-I9301I
but the phone is still not boot with booloop and no recovery mode.
Any help
Click to expand...
Click to collapse
download the right rom and flash it with odin

abdullah1038 said:
download the right rom and flash it with odin
Click to expand...
Click to collapse
I have tried to flahs it with multiple rom but same problem
Also i have tried a repair firmware (4 files) but same problem
It's just keep rebooting with blue text on top (Recovery booting.....)
Any help

any help please

alaa92 said:
any help please
Click to expand...
Click to collapse
try this it might work
download this file and extract it
http://allmobilesoft.com/zip/uploads/2016/12/I9301I-PIT-File-allmobilesoft.com_.rar
connect your phone with odin and click pit
and select the extracted file
click on repartition
click on pda and select the right rom for your phone
then click start it will take about 20 minutes.
remember i am not responsible if you bricked your device.

Finally i have managed to fix the phone.
I have extract the boot.img from firmware then flash it using odin without reboot
then install repair firmware
this the firmware i have used
i9301iXXUANF5_OJVUANF1_Arabic_v4.4.2_Repair_Firmware_FULL_4Files.zip
The method i have found it:
1- flash the phone with repair firmware. (i9301iXXUANF5_OJVUANF1_Arabic_v4.4.2_Repair_Firmware_FULL_4Files.zip)
2- after flashing the phone will dead (Black screen without rcovery mode or download mode or any thing). so i have insert the usb cable then remove the battery then reinsert the battery with keep pressing volume up + home button
3- you will enter the recovery mode.
4- then you have to wipe/factory reset data then reboot.

alaa92 said:
Finally i have managed to fix the phone.
I have extract the boot.img from firmware then flash it using odin without reboot
then install repair firmware
this the firmware i have used
i9301iXXUANF5_OJVUANF1_Arabic_v4.4.2_Repair_Firmware_FULL_4Files.zip
The method i have found it:
1- flash the phone with repair firmware. (i9301iXXUANF5_OJVUANF1_Arabic_v4.4.2_Repair_Firmware_FULL_4Files.zip)
2- after flashing the phone will dead (Black screen without rcovery mode or download mode or any thing). so i have insert the usb cable then remove the battery then reinsert the battery with keep pressing volume up + home button
3- you will enter the recovery mode.
4- then you have to wipe/factory reset data then reboot.
Click to expand...
Click to collapse
i9300I= dual sim
i9301i= one sim
download mod or model label under battery is not matter
if your phone dual sim flash i9300i or if one sim flash by i9301i file. just thish

Worng Firmware I9300I, right firmware is I9301I
I Have Same Problem
Please Help Me
---------- Post added at 02:15 PM ---------- Previous post was at 02:09 PM ----------
Hi
How are you?
I have flashed my phone with wrong firmware accidentally.
This the firmware i have used
I9300I
I can only go to Download mode (No recovery mode or boot)
but when i go to download mode the product name is GT-I9300I
Any help

kernel is not seandroid enforcing galaxy s3 neo I9301I
Accidentally Flash complied Firmware I9300I file
When I am Downloading Mode Their Is Product Nam : I9300I
how to flash it
Please
Help Me

Stuck in Samsung Logo Screen. Recovery Mode not loading. FRP Lock on

Suddenly My phone stopped working. Stuck in samsung logo screen . cannot enter recovery mode. I have only option is to use odin to install software. have downloaded files from sammobile site. Always stuck in initialisation for 30 min and then proceed and fails at re partition operation failed. tried to install twrp . download was halfway and stopped because of FRP Lock ON. How to proceed .. Pls help me..

Remove FRP lock
Download Samsung-combination-firmware (s7 edge ) (your-model-number) flash with odin. Reboot the device. Activate dev settings and reset the device. Reboot to download mode and flash stock Samsung firmware from Sammobile. If it dont work try againe. I remove 2 times FRP lock this way.
Latest SCF= HardReset.info: Galaxy S7 Edge SM-G935F COMBINATION_FA60_G935FXXU5ASD2_CL7964511
https://www.hardreset.info/articles/samsung-combination-firmware/

What is your binary? , you need to flash the combination firmware to get rid of frp lock and then flash a custom recovery or stock rom, you can actually see the binary number on the download mode ( volume down + power + home ) it is indicated with a B in red letters.

I'm also experiencing a similar problem.
My phone is stuck in the Samsung logo and cannot enter recovery, only download mode. It's unrooted and everything stock. The only difference is that I don't have the FRP lock on.
I've been trying to use Odin to restore the firmware, but couldn't do it. The behavior is very similar to what you're experiencing. It takes ~30minutes and then fails to re-partition or says that PIT file wasn't found. I've tried different Odin versions and downloaded different firmware versions.
Tried flashing with the "HOME_CSC" and the regular "CSC".
Also tried using Smart switch or Kies with no success (those don't find the phone in download mode).
Any tips?

Use 7zip to extract the CSC file from the firmware you downloaded from sammobile. After extraction you'll find the PIT file in the folder.
Start Odin 3.14
Go to options tab and enable re-partition and nand erase
Go to pit tab
Click on pit and select the pit file you extracted from the firmware
Now preload the BL, AP, CP and CSC md5 files
Click start and wait
---------- Post added at 02:58 AM ---------- Previous post was at 02:55 AM ----------
And for removing FRP lock the easiest way of doing this is by using a tool named FRP HiJacker by Hagard