Download the 4.2.2 or 4.3 from rootjunksdl.com(its a zip file)
Flash the cwm-bat recovery from the same site
Install the zip using the recovery and your are done..
If you need detailed steps just ask..
arunbiju969 said:
Download the 4.2.2 or 4.3 from rootjunksdl.com(its a zip file)
Flash the cwm-bat recovery from the same site
Install the zip using the recovery and your are done..
If you need detailed steps just ask..
Click to expand...
Click to collapse
Hi, can you please give me more infos about the whole process? i've never rooted or flashed nothing so i'm really out of it.
I've been looking online for a complete guide to downgrade the tablet but i didn't find anything which could help.
I won't risk to brick it if i do the wrong things just trying without know exactly the right steps to follow.
Wish you can give me the steps to follow so i can go back to KK and finally use it as it was.
Lately i'm facing worst battery life (its able to play movies for 2h and mins) and it's getting really hot :crying:
Thanks in advance.
Do i need to flash gapps
Related
Hope you can help me here. I have searched around not finding exactly what I need of info.
I have a rooted I9505 (using This method)
I have not installed any custom recovery. Just rooted european non-branded device.
I would like to have installed the new OTA update, but obviously my device will not let me do that.
How can I unroot or install this update without wiping my device?
Would need step by step instructions to make sure I do everything correctly.
Any help would be appreciated.
-Andyoid- said:
Hope you can help me here. I have searched around not finding exactly what I need of info.
I have a rooted I9505 (using This method)
I have not installed any custom recovery. Just rooted european non-branded device.
I would like to have installed the new OTA update, but obviously my device will not let me do that.
How can I unroot or install this update without wiping my device?
Would need step by step instructions to make sure I do everything correctly.
Any help would be appreciated.
Click to expand...
Click to collapse
use odin to flash latest firmware, it will not wipe your device. but make a backup before, for emergency. maybe you will need to wipe data if you your phone stuck into bootloop
see my sig. for odin
-Andyoid- said:
Hope you can help me here. I have searched around not finding exactly what I need of info.
I have a rooted I9505 (using This method)
I have not installed any custom recovery. Just rooted european non-branded device.
I would like to have installed the new OTA update, but obviously my device will not let me do that.
How can I unroot or install this update without wiping my device?
Would need step by step instructions to make sure I do everything correctly.
Any help would be appreciated.
Click to expand...
Click to collapse
Wait for Mobile Odin to support your device than flash with it
Sorted! Thanks.
Hey all, I'm fairly new to rooting an android device, this is actually the first time I'm rooting my phone. I used Wugs Nexus root toolkit to root my device and everything went well until the last step where I had to go open superSU app. I would get a popup stating "There is no SU binary installed, and SuperSu cannot install it. This is a problem! If you just upgraded to Android 4.3, you will need to manually re-root counsult the relevant forums for your device!"
What does this mean exactly? and where did i go wrong? I honestly don't have an idea on how to manually re-root.
Through the toolkit I've unrooted, flashed stocked and did the OEM lock again, and tried the whole rooting process again and I still get that same error. I think I need some guidance if you guys can help me a bit. Sorry to be a big noob about all this.
Thanks!
knicks20828 said:
Hey all, I'm fairly new to rooting an android device, this is actually the first time I'm rooting my phone. I used Wugs Nexus root toolkit to root my device and everything went well until the last step where I had to go open superSU app. I would get a popup stating "There is no SU binary installed, and SuperSu cannot install it. This is a problem! If you just upgraded to Android 4.3, you will need to manually re-root counsult the relevant forums for your device!"
What does this mean exactly? and where did i go wrong? I honestly don't have an idea on how to manually re-root.
Through the toolkit I've unrooted, flashed stocked and did the OEM lock again, and tried the whole rooting process again and I still get that same error. I think I need some guidance if you guys can help me a bit. Sorry to be a big noob about all this.
Thanks!
Click to expand...
Click to collapse
1. Read this if you haven't already, just so you know what you are doing.
http://forum.xda-developers.com/showthread.php?t=2367406
2. Install the SuperSU zip from recovery:
http://download.chainfire.eu/351/SuperSU/UPDATE-SuperSU-v1.65.zip
abaaaabbbb63 said:
1. Read this if you haven't already, just so you know what you are doing.
http://forum.xda-developers.com/showthread.php?t=2367406
2. Install the SuperSU zip from recovery:
http://download.chainfire.eu/351/SuperSU/UPDATE-SuperSU-v1.65.zip
Click to expand...
Click to collapse
thanks for that man, actually read all of it. that helped a little, I guess with time and the more i flash and stuff i'll just get better. So unroot and try rooting again and then zip supersu?
knicks20828 said:
thanks for that man, actually read all of it. that helped a little, I guess with time and the more i flash and stuff i'll just get better. So unroot and try rooting again and then zip supersu?
Click to expand...
Click to collapse
No need for "unroot". Just flash the supersu zip, and it will install the binaries.
abaaaabbbb63 said:
No need for "unroot". Just flash the supersu zip, and it will install the binaries.
Click to expand...
Click to collapse
Thanks man it worked! I feel so relieved now, So I'm trying to flash cyanogenmod 10.1.3 and I have the zip flie downloaded but I cant seem to find gapps that supports this cyanogen version and android 4.3 . is it not released yet? or something?
Sorry to be so annoying with this but I am getting better I can say that much.
knicks20828 said:
Thanks man it worked! I feel so relieved now, So I'm trying to flash cyanogenmod 10.1.3 and I have the zip flie downloaded but I cant seem to find gapps that supports this cyanogen version and android 4.3 . is it not released yet? or something?
Sorry to be so annoying with this but I am getting better I can say that much.
Click to expand...
Click to collapse
Flash the regular 4.2.2 Gapps. They will work.
http://goo.im/gapps/gapps-jb-20130812-signed.zip
Hi guys can somebody explain me step by step how to download the 4.4 img and flash it without losing any data? and please post the download link below please
wazowpt said:
Hi guys can somebody explain me step by step how to download the 4.4 img and flash it without losing any data? and please post the download link below please
Click to expand...
Click to collapse
It has been posted a number of times, a search would have given you the answer. Download the file HERE, and then just follow the directions HERE. The directions are for the 4.2 update, but the same steps are taken, just change the command from "adb sideload 094f6629314a.signed-nakasi-JOP40C-from-JZO54K.094f6629.zip" to "adb sideload 13088e35942c77e4752aa1fdf51d54472509b941.signed-nakasi-KRT16O-from-JWR66Y.13088e35.zip"
I cant update either
don't feel bad. I've tried to update my n7 for the last few hours. For some jacked up reason my computer can't see my N7 after it goes into fastboot. I've scoured the net and tried different solutions and still no luck. Guess I'll just wait.
I posted yesterday on this topic but wanted to give an update.
I downloaded the cyanogenmod for my LG G2. The you tube video I watched as watch?v=tyBc45ScZzw. When I try to reboot into revovery mode all I get a black screen and little Android guy with a red triangle over the top and a exclamation point in it.
\\\
Any help as to what I am doing wrong to get into recovery mode? I actually factory defaulted yestersday and tried again and the same thing is happening.
Thanks for the help
TheBull50 said:
I posted yesterday on this topic but wanted to give an update.
I downloaded the cyanogenmod for my LG G2. The you tube video I watched as watch?v=tyBc45ScZzw. When I try to reboot into revovery mode all I get a black screen and little Android guy with a red triangle over the top and a exclamation point in it.
\\\
Any help as to what I am doing wrong to get into recovery mode? I actually factory defaulted yestersday and tried again and the same thing is happening.
Thanks for the help
Click to expand...
Click to collapse
Seems you haven't installed a custom recovery yet buddy, if you tried, you've failed.
First root your phone, then install a custom recovery, then try again booting into your recovery.
If your already on stock kk, I don't believe you can install a custom recovery yet, only root it. So you would first have to downgrade back to JB.
Check the
Merfy said:
Seems you haven't installed a custom recovery yet buddy, if you tried, you've failed.
First root your phone, then install a custom recovery, then try again booting into your recovery.
If your already on stock kk, I don't believe you can install a custom recovery yet, only root it. So you would first have to downgrade back to JB.
Check the
Click to expand...
Click to collapse
What would be the best custom recovery to install? I def know my phone is rooted. That I already check. I have yet to go up to KK . My phone says Android Version 4.2.2
TheBull50 said:
What would be the best custom recovery to install? I def know my phone is rooted. That I already check. I have yet to go up to KK . My phone says Android Version 4.2.2
Click to expand...
Click to collapse
Well there only 2 options really, I'd say TWRP is more user friendly, so i would recommend that to you, before installing a rom first read the instructions and make sure they haven't first recommend a recovery for that specific rom installation.
Once you have a custom recovery its very simple to switch between them.
Follow the instructions here: http://forum.xda-developers.com/showthread.php?t=2469995
It's an old method but is very easy. This will install twrp but an old version.
So before using the method above first download the latest twrp onto your phone, i don't know what version of the g2 you have so if you reply i can try point you to the latest, but if you search for twrp 2.7 for your phone you should find it. You want it in .zip format.
So after saving the file to your phone, go ahead and follow the instructions above, if it says it successful, try booting into recovery again, the same way you managed to format your phone but this time it should boot your recovery, then press install .zip and flash the latest twrp.
Then your ready to go! just follow the instructions for the roms you'd like and flash them.
Best of Luck!
Merfy said:
Well there only 2 options really, I'd say TWRP is more user friendly, so i would recommend that to you, before installing a rom first read the instructions and make sure they haven't first recommend a recovery for that specific rom installation.
Once you have a custom recovery its very simple to switch between them.
Follow the instructions here: http://forum.xda-developers.com/showthread.php?t=2469995
It's an old method but is very easy. This will install twrp but an old version.
So before using the method above first download the latest twrp onto your phone, i don't know what version of the g2 you have so if you reply i can try point you to the latest, but if you search for twrp 2.7 for your phone you should find it. You want it in .zip format.
So after saving the file to your phone, go ahead and follow the instructions above, if it says it successful, try booting into recovery again, the same way you managed to format your phone but this time it should boot your recovery, then press install .zip and flash the latest twrp.
Then your ready to go! just follow the instructions for the roms you'd like and flash them.
Best of Luck!
Click to expand...
Click to collapse
I'm using a Verizon LG G2 VS980 . I just downloaded TWRP 2.7 though so I am going to give that a go !!
Hi please guide me step by step how can I install Cloudyfa's G3 Rom on my D800, phone is not rooted
current stock 4.2.2 Android with software version D80010q.
Please guide me I am noob in rooting .
federer38 said:
Hi please guide me step by step how can I install Cloudyfa's G3 Rom on my D800, phone is not rooted
current stock 4.2.2 Android with software version D80010q.
Please guide me I am noob in rooting .
Click to expand...
Click to collapse
1º Root your device:
http://forum.xda-developers.com/showpost.php?p=48709232&postcount=869
2º Install custom recovery, TWRP recomended
http://www.youtube.com/watch?v=nTJI9ThY0mk
Can download 2.7.0 version here: (dont use 2.7.1 version)
http://forum.xda-developers.com/showthread.php?t=2449679
3º EFS Backup
http://forum.xda-developers.com/showthread.php?t=2451390
4º Full Wipe (Dalvik, Cache, System & Data)
5º Flash KitKat baseband
http://www.androidfilehost.com/?w=files&flid=12880
Then:
Install the CloudyG3
Choose your variant in Aroma
Reboot
Make sure you read all the things more than once and understand what you are doing.
And make sure your phone is fully charged when you beggin.
federer38 said:
Hi please guide me step by step how can I install Cloudyfa's G3 Rom on my D800, phone is not rooted
current stock 4.2.2 Android with software version D80010q.
Please guide me I am noob in rooting .
Click to expand...
Click to collapse
@Magic2010 wrote a quick how to find the info you need. What I'm going to say is if you are a noob please read all the threads he posted, atleast 2 times each. Read them until you are certain you understand them. While rooting and such is fairly easy and it is not easy to truly hard brick your phone, soft bricks can be as easy as forgetting to push a button or not reading a file name completely.
I would suggest not just reading to top posts in each of the threads magic linked but read all the posts so you know what others did, and how they fixed it and our how they could have prevented any issues.
Sent from my LG-D800 using Tapatalk
_Dennis_ said:
@Magic2010 wrote a quick how to find the info you need. What I'm going to say is if you are a noob please read all the threads he posted, atleast 2 times each. Read them until you are certain you understand them. While rooting and such is fairly easy and it is not easy to truly hard brick your phone, soft bricks can be as easy as forgetting to push a button or not reading a file name completely.
I would suggest not just reading to top posts in each of the threads magic linked but read all the posts so you know what others did, and how they fixed it and our how they could have prevented any issues.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Magic2010 said:
1º Root your device:
http://forum.xda-developers.com/showpost.php?p=48709232&postcount=869
2º Install custom recovery, TWRP recomended
http://www.youtube.com/watch?v=nTJI9ThY0mk
Can download 2.7.0 version here: (dont use 2.7.1 version)
http://forum.xda-developers.com/showthread.php?t=2449679
3º EFS Backup
http://forum.xda-developers.com/showthread.php?t=2451390
4º Full Wipe (Dalvik, Cache, System & Data)
5º Flash KitKat baseband
http://www.androidfilehost.com/?w=files&flid=12880
Then:
Install the CloudyG3
Choose your variant in Aroma
Reboot
Make sure you read all the things more than once and understand what you are doing.
And make sure your phone is fully charged when you beggin.
Click to expand...
Click to collapse
How can I flash kitkat baseband any tutorial please?
federer38 said:
How can I flash kitkat baseband any tutorial please?
Click to expand...
Click to collapse
Just flash via recovery.
Sent from my LG-D802
Root lost
federer38 said:
How can I flash kitkat baseband any tutorial please?
Click to expand...
Click to collapse
I did all the steps, but when restarted phone, it still stucked at LG logo, and when restarting in recovery mode, it says possibly lost root... I flashed the latest SuperSU, but still the same. My device is LG G2 LS980 and I'll be waiting for any suggestions.
This VDO for OptimusG3 but it's a same method .
Unable to install the rom
joao88pt said:
I did all the steps, but when restarted phone, it still stucked at LG logo, and when restarting in recovery mode, it says possibly lost root... I flashed the latest SuperSU, but still the same. My device is LG G2 LS980 and I'll be waiting for any suggestions.
Click to expand...
Click to collapse
I have same problem with D800 ... I followed all the instruction and but I still fail to load the rom.
The LG G2 logo appears for few seconds after the reboot .. then the screen goes black.
Only way to fix it is to re flash .TOT file.
Any suggestions?