SM-G530H/DS Bricked please Help - Galaxy Grand Prime Q&A, Help & Troubleshooting

Hi to all,
please i need your help.
i need SDcard unbrick image generate by odin to unbrick G530H/DS phone that not boot any more after software download fail.
the computer detect as Qualcomm HS-USB QDLoader 9008.
thanks for your support.

fouad19764 said:
Hi to all,
please i need your help.
i need SDcard unbrick image generate by odin to unbrick G530H/DS phone that not boot any more after software download fail.
the computer detect as Qualcomm HS-USB QDLoader 9008.
thanks for your support.
Click to expand...
Click to collapse
Odin not work? tried flash stock rom?

NitroG3nics said:
Odin not work? tried flash stock rom?
Click to expand...
Click to collapse
odin could not detect the phone,in device manager detected as Qualcomm HS-USB QDLoader 9008.
it's very simple as shown on the link http://www.4shared.com/rar/DUY5sQJmce/boot_repair.html
all wat i need is that somebody with the same device provide the image generated.
thanks

any one?

have drivers installer ?

juancapo9999 said:
have drivers installer ?
Click to expand...
Click to collapse
yes driver installed

try in other computer ?

juancapo9999 said:
try in other computer ?
Click to expand...
Click to collapse
the issue is not in the computer,the bootloader on the phone is damaged ,the only way to revive the phone is by preparing a SDcard with the procedure explained on this link http://www.4shared.com/rar/DUY5sQJmce/boot_repair.html from identical phone (G530H/DS) and upload the image of the sdcard ,i will use it to recover the phone.

Hey Just explain more and i can help you but i didnt understand

abooooood said:
Hey Just explain more and i can help you but i didnt understand
Click to expand...
Click to collapse
Pre-requisites
1) Micro SD card
2) Normal Device or SDcard reader to download boot recovery pit and bootloader to SDcard
34) Pit and bootloader (included on the attached file.
procedure :
1) Run Odin3 v3.09.3.exe
2) Load “MSM8916_boot_recovery.pit” in PIT tap and normal bootloader file in BL tab.
3) Check in the "T Flash" option box to enable "T Flash" option.
4)Insert SDcard to normal phone and enter download mode.
5) Connect the phone to PC.
6) Click Start button to download pit and bootloader to SDcard.
→ If it’s PASS, SDcard was successfully made for boot recovery.
→ If it’s FAIL, try to this with another SD card. (SD card defective).
7)disconnect the phone ,retrieve SDcard from phone,put on card reader and use this software https://sourceforge.net/projects/win32diskimager/ to generate image from sdcard by selecting the sdcard on device and then click on read ,this will generate IMG file ,use winrar or zip to compress the file after that upload on any file server for example dropbox or mega.
with this file i can repair my phone.
Thank a lot for your support.

please i need your help

HELP ME
fouad19764 said:
please i need your help
Click to expand...
Click to collapse
I also need the debrick.img sm-g530h / ds, please help I searched the net without finding the file.

HELP
fouad19764 said:
please i need your help
Click to expand...
Click to collapse
I have the G530H__250MB.bin

It will be great if you upload the file to any usable filesharing service, mega or dropbox

HELP
fouad19764 said:
It will be great if you upload the file to any usable filesharing service, mega or dropbox
Click to expand...
Click to collapse
You can explain how this file is used to repair my sm-g530h / ds, as you pass the link can not post links here.

dears ,
here is the debrick image for g530h ds https://mega.nz/#!xlJmUaBS!utGA7O5Gcpo1NdITKjXKjEQQt0QTCEHTNcoathAdVos ,use win32 disk imager to write the IMG to sd card https://sourceforge.net/projects/win32diskimager/

Help me
fouad19764 said:
dears ,
here is the debrick image for g530h ds https://mega.nz/#!xlJmUaBS!utGA7O5Gcpo1NdITKjXKjEQQt0QTCEHTNcoathAdVos ,use win32 disk imager to write the IMG to sd card https://sourceforge.net/projects/win32diskimager/
Click to expand...
Click to collapse
Thanks friend for help, but it does not work, my phone does nothing to put the SD and prepared, not if I'm doing something wrong, can you tell me how did the process please.

fouad19764 said:
dears ,
here is the debrick image for g530h ds https://mega.nz/#!xlJmUaBS!utGA7O5Gcpo1NdITKjXKjEQQt0QTCEHTNcoathAdVos ,use win32 disk imager to write the IMG to sd card https://sourceforge.net/projects/win32diskimager/
Click to expand...
Click to collapse
Is it working? I couldn't find the other debrick.img for SM-G530H/DS did your phone fixed?

Yes did start the phone in download mode, but the emmc was damaged, after jtag attempt. You could try ang give feedback.
Sent from my JAZZ using Tapatalk

fouad19764 said:
Yes did start the phone in download mode, but the emmc was damaged, after jtag attempt. You could try ang give feedback.
Sent from my JAZZ using Tapatalk
Click to expand...
Click to collapse
So, you have to replace the emmc to boot normally?

Related

Urukdroid install problem: please transfer proper installation file

I'm trying to install the Urukdroid but is not going well , the last step transfer the Urukdroid 1.0 installation framework and pressing the power ..after that getting the error file of a corrupt or wrong file and the device is asking for another transfer "please transfer proper installation file" ..what can be wrong , I did downloaded the file many times from different file locations?
Hope someone knows the solution
Thanks
paterdamiaan said:
I'm trying to install the Urukdroid but is not going well , the last step transfer the Urukdroid 1.0 installation framework and pressing the power ..after that getting the error file of a corrupt or wrong file and the device is asking for another transfer "please transfer proper installation file" ..what can be wrong , I did downloaded the file many times from different file locations?
Hope someone knows the solution
Thanks
Click to expand...
Click to collapse
Hey,
Did you extracted the installation file out of the downloaded zip file?
Inside the downloaded file there is a archive file again (forgot what format), this file you have to extract out and copy that file onto your archos
Good luck!
Lenn said:
Hey,
Did you extracted the installation file out of the downloaded zip file?
Inside the downloaded file there is a archive file again (forgot what format), this file you have to extract out and copy that file onto your archos
Good luck!
Click to expand...
Click to collapse
Yes , thats the thing I did , file named UrukDroid-install.tgz copied to the device like it written in the installation procedure ....no need to unzip that one also
Try to download this file:
http://sauron.pourix.com/UrukDroid/UrukDroid-1.0/EI/UrukDroid-install.tgz
It is directly and no need to extract any more.. maybe your archive manager does something wrong..
Lenn said:
Try to download this file:
http://sauron.pourix.com/UrukDroid/UrukDroid-1.0/EI/UrukDroid-install.tgz
It is directly and no need to extract any more.. maybe your archive manager does something wrong..
Click to expand...
Click to collapse
Lenn same thing ...please transfer proper installation file , and ask for another transfer
paterdamiaan said:
Lenn same thing ...please transfer proper installation file , and ask for another transfer
Click to expand...
Click to collapse
drives me crazy ... ..the very last phase is going wrong ..so close....
Okey... me too
Maybe tjeres something wrong with the kernel
Download the zImage and the initramfs as single files from here:
http://sauron.pourix.com/UrukDroid/UrukDroid-1.0/EI/
Then flash the kernel again, like you did it before (via the recovery menu)
After try the installation with the as single file downloaded installation file
Lenn said:
Okey... me too
Maybe tjeres something wrong with the kernel
Download the zImage and the initramfs as single files from here:
http://sauron.pourix.com/UrukDroid/UrukDroid-1.0/EI/
Then flash the kernel again, like you did it before (via the recovery menu)
After try the installation with the as single file downloaded installation file
Click to expand...
Click to collapse
Lenn, this is different , another problem ...after flashing the kernel with the "let's say " new files , what is going fast then going into the developer menu ..archos needs to reboot in that menu and I should get UrukDroid 1.0 Installation framework and select simple installation ..but does not get to that boot ....the original archos kernel completely starts up .
Let me know tomorrow ....we need some sleep being busy with this whole day
I wanted to thank you for the given support for now ..hope someone will know the answer
paterdamiaan said:
Lenn, this is different , another problem ...after flashing the kernel with the "let's say " new files , what is going fast then going into the developer menu ..archos needs to reboot in that menu and I should get UrukDroid 1.0 Installation framework and select simple installation ..but does not get to that boot ....the original archos kernel completely starts up .
Let me know tomorrow ....we need some sleep being busy with this whole day
I wanted to thank you for the given support for now ..hope someone will know the answer
Click to expand...
Click to collapse
Lenn , any new ideas about a solution since yesterday ?
paterdamiaan said:
Lenn , any new ideas about a solution since yesterday ?
Click to expand...
Click to collapse
I may didnt uhderstand you right,but:
Did you boot into the Developer Edition after flashing the new kernel?
You have to, urukdroid is the "new" SDE after the installation
Lenn said:
I may didnt uhderstand you right,but:
Did you boot into the Developer Edition after flashing the new kernel?
You have to, urukdroid is the "new" SDE after the installation
Click to expand...
Click to collapse
Lenn, the files you send me separately did not worked at all , same problem as before invalid file . Flashing the kernel is working , the install zip file Urukdroid transfer at the very last step still gives invalid file ans ask for re-sending a correct file , no matter what I do no file seems to be ok
paterdamiaan said:
Lenn, the files you send me separately did not worked at all , same problem as before invalid file . Flashing the kernel is working , the install zip file Urukdroid transfer at the very last step still gives invalid file ans ask for re-sending a correct file , no matter what I do no file seems to be ok
Click to expand...
Click to collapse
... unfortunality i have no idea atm....
Maybe your disk has a failure... try to completly wipe your archos again install the newest archos firmware directly after the update and try it again...
Sorry, i think but i dont see any solution yet...
paterdamiaan said:
Lenn, the files you send me separately did not worked at all , same problem as before invalid file . Flashing the kernel is working , the install zip file Urukdroid transfer at the very last step still gives invalid file ans ask for re-sending a correct file , no matter what I do no file seems to be ok
Click to expand...
Click to collapse
recap
Flash initramfs.cpio.gz and zImage from SDE boot menu is working fine
after going into
Boot to SDE:
power on (2) Archos, hold up/+ volume key (1) until you see "Archos AXXXX - Boot Menu",
choose "Developer edition" is also working
You should see "UrukDroid 1.0 Installation framework" title. Please choose simple install method. is working well
When asked to, connect Archos to PC (5) once again and copy UrukDroid-install.tgz,
This step is working...transfert can be done
disconnect Archos from PC properly (umount, safely remove device etc.) and press power button (2)
at this point the device saying that there is an invalid file
Try it with advanced install
Choose the recommended values (on the top) but also select that you want to format the partitions and create new ones
Lenn said:
Try it with advanced install
Choose the recommended values (on the top) but also select that you want to format the partitions and create new ones
Click to expand...
Click to collapse
Hmmm tried that already many times , i will give that another try and let you now
paterdamiaan said:
Hmmm tried that already many times , i will give that another try and let you now
Click to expand...
Click to collapse
lenn, did the advanced install , on SD , 512 rootfs ,and 1.5 g for data
Format of all partitions went ok , the transfer of the 140,3 meg file to install ok until the step to press power button once to start the install ..again the invalid file error message
just thinking could it be something with the sd card ?
paterdamiaan said:
lenn, did the advanced install , on SD , 512 rootfs ,and 1.5 g for data
Format of all partitions went ok , the transfer of the 140,3 meg file to install ok until the step to press power button once to start the install ..again the invalid file error message
just thinking could it be something with the sd card ?
Click to expand...
Click to collapse
Aah you installed it on a external sd card?
if yes please give some informations about it (size,speed,class,...)
Lenn said:
Aah you installed it on a external sd card?
if yes please give some informations about it (size,speed,class,...)[/QUO
kingston 32 GB sdc n0214-001 made in taiwan off course
Just one question , if i have choosen most of the time the simple install ..is the Urukdroid also installing on the SD Card?
Can I choose to install on the memory of the archos?
Click to expand...
Click to collapse
paterdamiaan said:
Lenn said:
Aah you installed it on a external sd card?
if yes please give some informations about it (size,speed,class,...)[/QUO
kingston 32 GB sdc n0214-001 made in taiwan off course
Just one question , if i have choosen most of the time the simple install ..is the Urukdroid also installing on the SD Card?
Can I choose to install on the memory of the archos?
Click to expand...
Click to collapse
Lenn, I have choosen for an install on internal memory , now it is working !!!!!!!!!!!!
where can I find the Urukdroid 1.5 ?
Click to expand...
Click to collapse
paterdamiaan said:
Lenn said:
Aah you installed it on a external sd card?
if yes please give some informations about it (size,speed,class,...)
Click to expand...
Click to collapse
kingston 32 GB sdc n0214-001 made in taiwan off course
Just one question , if i have choosen most of the time the simple install ..is the Urukdroid also installing on the SD Card?
Can I choose to install on the memory of the archos?
Click to expand...
Click to collapse
Maybe the sd card is to big for urukdroid... and the sd card have to be formatted to fat32 ad have to be clear..
Normally urukdroid installs on external sd card
You can in the advanced install method

HELP!please

My S4 doesnt boot it does not show any signs of live at all i mounted it with link2sd after partitioning with minitool partition wizard.
It doesnt boot up or show any usb contact with my pc what happened ?
PLEASE HELP ME
I guess you messed up the partitions.
You'd have to flash stock rom with PIT file I guess.
But the PC has to recognized the phone for this to work.
GDReaper said:
I guess you messed up the partitions.
You'd have to flash stock rom with PIT file I guess.
But the PC has to recognized the phone for this to work.
Click to expand...
Click to collapse
but how can i get it too boot into download mode again ?
it doesnt vibrate or power on i think i mounted mmcblk1p2 or 3 i dont really know i clicked on create mount-script for FAT32.:crying:
it recognizes it as qualcomm device what should i do now ?
Can someone extract the contents of this pit file https://mega.co.nz/#!ddIF2LjD!LJL7LYvUlbjMQONxlrM8mXgY_ScsJ0CcAXrsJdToAKU in .mbn and the other things and upload it for me please i need it so bad.
BCT99 said:
Can someone extract the contents of this pit file https://mega.co.nz/#!ddIF2LjD!LJL7LYvUlbjMQONxlrM8mXgY_ScsJ0CcAXrsJdToAKU in .mbn and the other things and upload it for me please i need it so bad.
Click to expand...
Click to collapse
Why can't you?
DSA said:
Why can't you?
Click to expand...
Click to collapse
i dont really know how and what to use
BCT99 said:
i dont really know how and what to use
Click to expand...
Click to collapse
Use a zip program like 7zip
BCT99 said:
i dont really know how and what to use
Click to expand...
Click to collapse
i dont know what programme to use and all i want is torepair my phone and recover it from hard brick
BCT99 said:
i dont know what programme to use and all i want is torepair my phone and recover it from hard brick
Click to expand...
Click to collapse
I just told you, use 7zip to extract what you need
DSA said:
I just told you, use 7zip to extract what you need
Click to expand...
Click to collapse
oh sorry i didnt read it before writing
BCT99 said:
oh sorry i didnt read it before writing
Click to expand...
Click to collapse
still not working cant extract 7zip doesnt recognize the pit file it doesnt open it
BCT99 said:
still not working cant extract 7zip doesnt recognize the pit file it doesnt open it
Click to expand...
Click to collapse
You use 7zip to extract the pit file and Odin to flash it with
DSA said:
You use 7zip to extract the pit file and Odin to flash it with
Click to expand...
Click to collapse
no i meant the things inside the pit file like aboot or smb.mbn or something like that
BCT99 said:
no i meant the things inside the pit file like aboot or smb.mbn or something like that
Click to expand...
Click to collapse
Flash the pit file as a whole file, you don't extract anything from it
DSA said:
Flash the pit file as a whole file, you don't extract anything from it
Click to expand...
Click to collapse
i cant get in download mode and my pc just recognizes my phone as qualcomm hs usb qdloader 9000
BCT99 said:
i cant get in download mode and my pc just recognizes my phone as qualcomm hs usb qdloader 9000
Click to expand...
Click to collapse
Then you need to send your phone in for repairs

[ Fix the BalongC**B*** issue in build number ]

Hi!
i hope this help you!
You have a phone locked to a provider, like Vodafone, etc, etc and you had installed a ROM that give you the BalongC**B*** issue in build number insted of of the rom build number is because your vendor is missing in that rom and your installation is not completed!!!
Is easy to fix it, you need to have Huawei recovery, doesn´t work with TWRP, just extract the dload folder to your sd card from this zip bellow and install like a default ROM, this will change your vendor to hw/eu, the vendor that came in provider free ROMs!
Just do a factory resete after flash! :fingers-crossed:
how im supposed to instal it? i dont know , help pls
zaszas said:
how im supposed to instal it? i dont know , help pls
Click to expand...
Click to collapse
Download the file
Reboot into TWRP recovery
Tap install
Find the file you just downloaded normally in Download folder select it
Swipe
Wait for finish
Reboot into system
ndg_2000 said:
Download the file
Reboot into TWRP recovery
Tap install
Find the file you just downloaded normally in Download folder select it
Swipe
Wait for finish
Reboot into system
Click to expand...
Click to collapse
right up top it says that it wont work with twrp
zaszas said:
right up top it says that it wont work with twrp
Click to expand...
Click to collapse
Sorry my bad
Download the file to your device
Unzip to a new folder named Dload in the root / of your SD card or the internal memory
Switch off phone
Restart to huawei recovery power and volume up
It should automatically detect file and flash
ndg_2000 said:
Sorry my bad
Download the file to your device
Unzip to a new folder named Dload in the root / of your SD card or the internal memory
Switch off phone
Restart to huawei recovery power and volume up
It should automatically detect file and flash
Click to expand...
Click to collapse
it give me " sofware install failed" ..
zaszas said:
it give me " sofware install failed" ..
Click to expand...
Click to collapse
Try renaming folder to DLOAD
It's not working.
Hello, i'm having the same problem, like zaszas, it won't install, dosen't matter how i rename the folder..any ideas?
why I can't install by usig twrp?

Moto g4 plus with software channel timbr dont'n work network after flash.

Hello, i have a xt1640 that after flash this firmware: https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138 is without network, imei two is corrupted(is 60178888153A08) and radio not turn on. It is happening because my software channel is timbr? something related to baseband? Will I only be able to correct this if I pick up a device with the timbr software channel to backup and flash on in this phone? In the configurations it is recognized as moto g4 plus, the sensor of digital prints and wifi work, the only thing not working is the network.
Sorry for my bad english, i'm brazilian. it's my first post on xda so sorry about anything.
AnonyWorld said:
Hello, i have a xt1640 that after flash this firmware: https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138 is without network, imei two is corrupted(is 60178888153A08) and radio not turn on. It is happening because my software channel is timbr? something related to baseband? Will I only be able to correct this if I pick up a device with the timbr software channel to backup and flash on in this phone? In the configurations it is recognized as moto g4 plus, the sensor of digital prints and wifi work, the only thing not working is the network.
Sorry for my bad english, i'm brazilian. it's my first post on xda so sorry about anything.
Click to expand...
Click to collapse
I think U have flashed incorrect frimware of ur device which lead to beraking of imei try to flash correct frumware . When tge imei will repair ur phn will get network signal
Love Dhir said:
I think U have flashed incorrect frimware of ur device which lead to beraking of imei try to flash correct frumware . When tge imei will repair ur phn will get network signal
Click to expand...
Click to collapse
Hello, thank you for answer. I'm solved this error with this thread: https://forum.xda-developers.com/moto-g4/how-to/baseband-change-t3762270/post75988960#post75988960
AnonyWorld said:
Hello, thank you for answer. I'm solved this error with this thread: https://forum.xda-developers.com/moto-g4/how-to/baseband-change-t3762270/post75988960#post75988960
Click to expand...
Click to collapse
You have to flash the zip through TWRP ?
Heyner_Gomez said:
You have to flash the zip through TWRP ?
Click to expand...
Click to collapse
No, in this zip have a two files, one .bat for windows and one .sh for linux. If you use windows, open the .bat file with an editor and go to six line "SET fastboot=" and change the patch of you fastboot files(the folder of you fastboot), after that execute the .bat and follow the steps .
AnonyWorld said:
No, in this zip have a two files, one .bat for windows and one .sh for linux. If you use windows, open the .bat file with an editor and go to six line "SET fastboot=" and change the patch of you fastboot files(the folder of you fastboot), after that execute the .bat and follow the steps .
Click to expand...
Click to collapse
You can edit it and you can pass it to me please.
The folder of fastboot is on the desktop...
Heyner_Gomez said:
You can edit it and you can pass it to me please.
The folder of fastboot is on the desktop...
Click to expand...
Click to collapse
Move or copy you folder to c disk and rename to fastboot. Download .zip and extract in c disk and execute.
AnonyWorld said:
Move or copy you folder to c disk and rename to fastboot. Download .zip and extract in c disk and execute.
Click to expand...
Click to collapse
thanks friend:good:
Heyner_Gomez said:
thanks friend:good:
Click to expand...
Click to collapse
Worked?
AnonyWorld said:
Worked?
Click to expand...
Click to collapse
Use this method.
https://forum.xda-developers.com/showpost.php?p=76406797&postcount=11

HI,I generate some 9008 for g5 file such as rawprogram.xml , patch.xml

I have get some script to generate some 9008 file,and if you want to flash you need to extract the kdz to dz then extract the dz and then rename those partition file ,for example aboot.img *.img,except the system userdata,cache,primarygpt,backupgpt,and the version of each model please find in the picture ,then you need to put those partiton file to the 9008 file folder.now you can flash via qpst ,miflach etc.link one driver:htt中ps:/中/国1dr中v.ms/国u/国s!Ah7oj7w97UeNk-QVr6uDUye-oOoTYQlink baiduyun from china 百度云:ht中tps:/国/中pa中n.bai中du.com/中s中/1HZVtPTPOlUrl-sgm8jcL0A 密password码: hmm2
Can you please post the correct links tho the files
Dear! You can and make the instruction to start, or already restore something on the phone in the mode of 9008 ???
synescu said:
Can you please post the correct links tho the files
Click to expand...
Click to collapse
I have these files. Send me a pm if you want this.
Sent from my [device_name] using XDA-Developers Legacy app
Please give it to me. Send it to email [email protected]. Thank you very much!
Zoeriva said:
I have these files. Send me a pm if you want this.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
hi can plz give the files
walidham said:
hi can plz give the files
Click to expand...
Click to collapse
Just remove the Chinese characters from the link. The first link is still working.
albertwcedla said:
I have get some script to generate some 9008 file,and if you want to flash you need to extract the kdz to dz then extract the dz and then rename those partition file ,for example aboot.img *.img,except the system userdata,cache,primarygpt,backupgpt,and the version of each model please find in the picture ,then you need to put those partiton file to the 9008 file folder.now you can flash via qpst ,miflach etc.link one driver:htt中ps:/中/国1dr中v.ms/国u/国s!Ah7oj7w97UeNk-QVr6uDUye-oOoTYQlink baiduyun from china 百度云:ht中tps:/国/中pa中n.bai中du.com/中s中/1HZVtPTPOlUrl-sgm8jcL0A 密password码: hmm2
Click to expand...
Click to collapse
Thank you so much for the files
There doesn't seem to be any files for the H831...
The firehose programer included in these files works for me only with Verizon, but failed with sprint or other brands. I hope if anyone else has another lg g5 programer shares it here.
Saloomy83 said:
The firehose programer included in these files works for me only with Verizon, but failed with sprint or other brands. I hope if anyone else has another lg g5 programer shares it here.
Click to expand...
Click to collapse
Unfortunetly due to anti-rollback messures used by LG and Carriers, fixing a hard bricked G5 is essentially immpossible. It may be doable if your on Stock Marshmellow

Categories

Resources