Related
Hi Guys,
I have been having issues when trying to end a call with the new WP7 Rom. I also used to have this when using Andriod Roms.
When I go to end a call, pressing the end call button does nothing apart from light up the keypad. I've tried pressing every button but nothing but the keypad lighting up happens, the call never ends! I have to remove my battery and switch the phone back on to get the use of my phone back.
I have :
HardSPL 2.08
MAGDLR111
Radio 2.15.50.14
Any Ideas?
Thanks,
Jon
jonathan.stowell said:
Hi Guys,
I have been having issues when trying to end a call with the new WP7 Rom. I also used to have this when using Andriod Roms.
When I go to end a call, pressing the end call button does nothing apart from light up the keypad. I've tried pressing every button but nothing but the keypad lighting up happens, the call never ends! I have to remove my battery and switch the phone back on to get the use of my phone back.
I have :
HardSPL 2.08
MAGDLR111
Radio 2.15.50.14
Any Ideas?
Thanks,
Jon
Click to expand...
Click to collapse
Did you not try the end call on the screen? Not the hard one on the bottom right of phone
Russ
The screen turns off when making a call so the touch buttons are not available. This is why I have to remove the battery as I have no other way of bringing the display back to life. Obviously if I make a call and the other person hangs up it's fine. However if they do not answer and it goes to voicemail or I call my voicemail I get stuck in a never ending loop of press 2 to hear your messages.
jonathan.stowell said:
The screen turns off when making a call so the touch buttons are not available. This is why I have to remove the battery as I have no other way of bringing the display back to life. Obviously if I make a call and the other person hangs up it's fine. However if they do not answer and it goes to voicemail or I call my voicemail I get stuck in a never ending loop of press 2 to hear your messages.
Click to expand...
Click to collapse
Official windows phones have no hard end call button, just the on screen one, therefor I dont think its possible to end a call with the hardware button. Yes, the screen goes off when making a call, but due to the proximity censor it should come back when you move it away from your head. If it does not, make sure its not covered, even a screen protector can block the proximity sensor. Its located next to the speaker.
Hmm I removed the screen protector and still no joy when I move the phone away from my face. The screen just remains black. I did crack the screen about 5 months ago and had it replaced, perhaps they've done a poor job on this....
Don't think so... My is in perfect shape. proximity works on android but not on wp7... i also can't press end call button.
same thing with me
well i get the same problem with mine also, is there anything we can do for that.
I have the same issue, though it only happens to me when calling my voicemail. I hit "end call" and it just hangs there with the message "Ending call..." and I have to pull the battery :/ Regular phone calls have been just fine though.
Finally cracked this one!
I have been experiencing this issue on my Optimus 7 phone since day one, on all firmware versions and I now have the latest update.
This is what worked for me:
-set the automatic brightness to off and choose any manual setting that suits your needs, I chose medium.
-set the screen timeout to never (not sure that this is necessary, I will change it back to 30 sec to see if the issue returns and post back)
I hope this works with your phones, it was really frustrating to pull the batery out. Good luck!
I've had this issue as well. Pressing the end call button on the screen won't end many of my calls, voicemail or to another person. But it's rare enough that it hasn't bothered me, too much. But is a problem that needs to be figured out, if possible.
We should come up witha way to re map the hard buttons to usefull use
jonathan.stowell said:
Hi Guys,
I have been having issues when trying to end a call with the new WP7 Rom. I also used to have this when using Andriod Roms.
When I go to end a call, pressing the end call button does nothing apart from light up the keypad. I've tried pressing every button but nothing but the keypad lighting up happens, the call never ends! I have to remove my battery and switch the phone back on to get the use of my phone back.
I have :
HardSPL 2.08
MAGDLR111
Radio 2.15.50.14
Any Ideas?
Thanks,
Jon
Click to expand...
Click to collapse
I'm assuming your phone is an HD2. First of all, the call should automatically end when the other party hangs up. Secondly, just hit the Power button to turn the screen back on and then unlock the phone and hang up. What is so difficult? WP7 remaps the HD2 buttons so they don't work as they did in WM.
swangoose said:
I have been experiencing this issue on my Optimus 7 phone since day one, on all firmware versions and I now have the latest update.
This is what worked for me:
-set the automatic brightness to off and choose any manual setting that suits your needs, I chose medium.
-set the screen timeout to never (not sure that this is necessary, I will change it back to 30 sec to see if the issue returns and post back)
I hope this works with your phones, it was really frustrating to pull the batery out. Good luck!
Click to expand...
Click to collapse
Worked. T H A N K S!!!
doesn't actually seem to matter which firmware I'm running but here's the issue;
phone rings in my pocket, take the phone out then try to slide the button (on screen) to answer the call, but the screen completely freezes (as do the soft buttons) like the phone has completely locked-up.
only once it's stopped ringing (missed call) can you switch it off (soft-off, screen, standby, whatever) and then switch it back on again and it starts functioning normally. trouble is I've missed the call regardless.
wondering if anyone's had this issue (didn't see another similar thread) and if there's a likely cause, and solution.
if I'm the only one then perhaps there's a hardware fault.
also is there a relatively simple way to replace the call-handling software, or am I stuck with the native one.
Ta.
kaelin000 said:
doesn't actually seem to matter which firmware I'm running but here's the issue;
phone rings in my pocket, take the phone out then try to slide the button (on screen) to answer the call, but the screen completely freezes (as do the soft buttons) like the phone has completely locked-up.
only once it's stopped ringing (missed call) can you switch it off (soft-off, screen, standby, whatever) and then switch it back on again and it starts functioning normally. trouble is I've missed the call regardless.
wondering if anyone's had this issue (didn't see another similar thread) and if there's a likely cause, and solution.
if I'm the only one then perhaps there's a hardware fault.
also is there a relatively simple way to replace the call-handling software, or am I stuck with the native one.
Ta.
Click to expand...
Click to collapse
I had this same issue, I was using a live wallpaper, when I went back to a standard wallpaper my defy no longer froze and screen went blank during calls.
Sorry, this is a year late!
scranno said:
I had this same issue, I was using a live wallpaper, when I went back to a standard wallpaper my defy no longer froze and screen went blank during calls.
Sorry, this is a year late!
Click to expand...
Click to collapse
Have a similar problem with my Defy; an incoming call "rings" but the screen remains inactive (black) so the call cannot be answered. This is an intermittent problem; I'll play with the wallpaper and let you know.
Regards
I realise that this is quite a useful function, but for me, it's troublesome, especially if the call doesn't get through, and I am sent to voicemail. You see, I believe that either my light sensor or my proximity sensor is not functioning properly. When I accept a call, call someone, the screen goes off, and doesn't come back on till the call ends, or I take out the battery and put it back in.
I'm sure this is a hardware thing, as I've tried installing Android, and the problem persists. I don't really want to spend money fixing my phone, as I can't really afford it right now. So, back to my question, is there a way to make sure the screen doesn't turn off when I'm calling someone? Is there a registry tweak or something? Or is there a setting I'm just not seeing?
I'm using pdaimatejam's WP7 version 8.1 (I think) ROM, if that makes any difference.
Thanks!
this is normal operate, not error... screen go off for reason you not break call when phone too close to ear with touch... but when you move phone from ear screen must turn on again....
markiemice said:
........................When I accept a call, call someone, the screen goes off, and doesn't come back on till the call ends, or I take out the battery and put it back in.
I'm using pdaimatejam's WP7 version 8.1 (I think) ROM, if that makes any difference.
Thanks!
Click to expand...
Click to collapse
When you accept a call, its a feature of Windows to switch off the light but sometimes it never comes back and you are stuck at "no display". I also face the same issue. Its the ROM bug. I'm also using pdaimatejam's WP7.
Don't worry... Your phone is fine
Also had this happen twice. But then I disabled the feature to turn on the speaker when the phone is turned during a call and it didn't happen ever since. Not sure if that's really the cause, but you could give it a try.
dxdy said:
this is normal operate, not error... screen go off for reason you not break call when phone too close to ear with touch... but when you move phone from ear screen must turn on again....
Click to expand...
Click to collapse
As I've mentioned, my phone light doesn't come back on when I remove it from my ear. This cannot be normal. It can't be normal that I have to reseat the battery after every failed call.
tanush said:
When you accept a call, its a feature of Windows to switch off the light but sometimes it never comes back and you are stuck at "no display". I also face the same issue. Its the ROM bug. I'm also using pdaimatejam's WP7.
Don't worry... Your phone is fine
Click to expand...
Click to collapse
If you read my original post, I mentioned that I tried this on Android as well, and I get the same problem.
cerebos said:
Also had this happen twice. But then I disabled the feature to turn on the speaker when the phone is turned during a call and it didn't happen ever since. Not sure if that's really the cause, but you could give it a try.
Click to expand...
Click to collapse
Are you talking about the settings in the "Attentive Phone" section? Didn't work for me.
markiemice said:
Are you talking about the settings in the "Attentive Phone" section? Didn't work for me.
Click to expand...
Click to collapse
Yes I did.
I have the same problem as you, although I have not tried flashing android yet but that is my next step. When on a call screen goes off and never turns back on.
I use bluetooth headset so I can kill the call with it and screen comes back thankfully. But I can't delete voice mails or use the screen at all during a call. ON Pdaimatejam's 8.5 rom.
We don't have a fix for this yet?
for me its oks.. if the screen is off it may touch your skin and could end the call...if you remove the phone from your ear and would like to use the dialer while still on the call, the screen powers up automatically..
phoy18 said:
for me its oks.. if the screen is off it may touch your skin and could end the call...if you remove the phone from your ear and would like to use the dialer while still on the call, the screen powers up automatically..
Click to expand...
Click to collapse
But that is just it, It doesn't power up automatically at all. It stays off no matter what you do untill you actually end the call! be that pull the battery, other person hangs up, or you use Headset to end call..
What rom are you using?
sageki said:
But that is just it, It doesn't power up automatically at all. It stays off no matter what you do untill you actually end the call! be that pull the battery, other person hangs up, or you use Headset to end call..
What rom are you using?
Click to expand...
Click to collapse
im using the latest from pdaimatejam. even the older 8.5, once i removed my phone to my ear, screen turns on even the call has not ended..
Would really love a fix for this also.. I must admit though that i don't think it is a hardware issue.. Nevertheless it could be fixed with a regedit or something like that.. Can't really use the phone anymore
sageki said:
But that is just it, It doesn't power up automatically at all. It stays off no matter what you do untill you actually end the call! be that pull the battery, other person hangs up, or you use Headset to end call..
Click to expand...
Click to collapse
Seems that the light sensor is broken, it's the little point in the upper left corner of the phone. The only workaround I see is to use a headset (BT or cable). With this you still can hang up any calls.
I have searched and then made this thread. There were some people with home button issue but None of those were related to my problem.
PHONE MODEL - GT-I9505 ( International version)
I have had my S4 for a couple of months now and I am addicted to flashing. I flash a test lot of new roms.
MY PROBLEM
When i make or I get a call, Once i pick the call and put my phone to the ear and after the proximity sensor turns off the screen i cannot use my home button or powerbutton to wake the screen during call. For example if i want to cut the call During a call. I simply cannot do it. Sometimes the home button will respond, Some times it wont
For the home button to work The other party has to cut the all only when my phone detects that the call has been disconnected it wakes up. Looks like the home button stops functioning ?
I dont know what is happening.
I thought it was the rom issue, But it isnt. I tried two different roms. Did the same behaviour.
Any advice or anything to help me will be appreciated. Is my hardware damaged?
My phone is never dropped and is very new like .
ROMS I TRIED
Wanam Lite.
Cynogenmod 10.1
same problem. any solutions?
I am having the same issue with my home button. Won't press during calls. Did you ever find a solution? Thanks!
rdhalla said:
I have searched and then made this thread. There were some people with home button issue but None of those were related to my problem.
PHONE MODEL - GT-I9505 ( International version)
I have had my S4 for a couple of months now and I am addicted to flashing. I flash a test lot of new roms.
MY PROBLEM
When i make or I get a call, Once i pick the call and put my phone to the ear and after the proximity sensor turns off the screen i cannot use my home button or powerbutton to wake the screen during call. For example if i want to cut the call During a call. I simply cannot do it. Sometimes the home button will respond, Some times it wont
For the home button to work The other party has to cut the all only when my phone detects that the call has been disconnected it wakes up. Looks like the home button stops functioning ?
I dont know what is happening.
I thought it was the rom issue, But it isnt. I tried two different roms. Did the same behaviour.
Any advice or anything to help me will be appreciated. Is my hardware damaged?
My phone is never dropped and is very new like .
ROMS I TRIED
Wanam Lite.
Cynogenmod 10.1
Click to expand...
Click to collapse
jasonbosch said:
I am having the same issue with my home button. Won't press during calls. Did you ever find a solution? Thanks!
Click to expand...
Click to collapse
Go to Apps - Settings - My device - Call - Untick Turn off screen during calls :highfive:
Whenever I start or answer a phone call, my screen goes black and will not turn on until the other person hangs up. I just recently found on my ROM that I can set the power button to end the call so I have been using that, but I cannot use the keypad to type passwords and it is very frustrating. Any ideas on what could be wrong? I am currently using the Black Edition PACRom for the s4, but the problem also happened when using the standard cyanogenmod. I am thinking that maybe the proximity sensor is screwed up but I am just very frustrated about it. Any help would be great!
iamth3jack said:
Whenever I start or answer a phone call, my screen goes black and will not turn on until the other person hangs up. I just recently found on my ROM that I can set the power button to end the call so I have been using that, but I cannot use the keypad to type passwords and it is very frustrating. Any ideas on what could be wrong? I am currently using the Black Edition PACRom for the s4, but the problem also happened when using the standard cyanogenmod. I am thinking that maybe the proximity sensor is screwed up but I am just very frustrated about it. Any help would be great!
Click to expand...
Click to collapse
I think it is the proximity sensor, I had the same issue and what I did is to replace the glass and making some enlargement near the proximity sensor in order to have more blank space around.
you can see it in the photo.
With stock rom, things goes find, now the screen goes black only if i place it on my ear, but with custom rom, i can not hang up calls even if i press the hang up button, call still continuing.
Sorry, if my english is bad, i am a french speaking.