Related
Odin is the saviour tool for all Samsung devices. The method for flashing by Odin differs from device to device.
This thread will give step by step instructions on how to flash a stock rom from Odin on the GT-I9070/p :
A. Download Odin tools from here : http://d-h.st/3zJ
Pass : shaaan
B. Download the stock rom from www.samfirmware.com
Setting up Odin :
1. Make sure you have installed the necessary drivers for this device. The drivers can be installed from within KIES or seperately. (I will upload the drivers shortly).
2. Run Odin as administrator.
3. Setting up the files is divided in two types depending on the firmware type :
a. If the firmware is a multi package file, put the files in the corresponding sections.
ie. CSC file in CSC section, PDA file in PDA section.
b. If the firmware is a single package, add the single file in the PDA section.
4. Now that Odin is setup, put the phone in download mode. To do that, power off the phone and press 'home+power+volume down' buttons together. Keep the buttons pressed till Download mide appears.
5. Now that Odin and the phone are setup, connect the phone to the device. Odin will detect the device and show something like 'com port (1)'
6. Flash the device.
7. The flash will take 5 minutes for a full flash on average.
8. When the flashing is complete, DO NOT remove the device until Odin shows ' PASS '.
9. The device will reboot. Remove the device, go to recovery mode and do a factory/data reset.
That's it. Happy flashing peeps..!!
Awesome guide mate - messing around with our device without Odin is risky !
This should be sticky. A lot of people is asking how to revert to original FW, or similiar questions that is connected to reverting. And it is almost at the end of forum, and thay cant see it.
I pmed the mods to do it. But they won't budge..
Please pm them..
Nice guide!!!
And adding images would be a nice option.
And plz add a point which tells which buttons to press like
"Re-Partition" ,"Auto Reboot","F.Reset Time" ,"Flash Lock"......
Sent from my GT-I9070 using xda premium
Very good guide,good work !
It may be better if you add some images
atishey23 said:
Nice guide!!!
And adding images would be a nice option.
And plz add a point which tells which buttons to press like
"Re-Partition" ,"Auto Reboot","F.Reset Time" ,"Flash Lock"......
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
From what I was able to find in other guides it is ONLY 'Auto Reboot' and 'F. Reset Time' to be checked.
All others to be unchecked.
There are some posts not to bother with that .pit file that is inside Odin .zip file.
Odin package from sammobile got 2 .pit files for 8GB - GT-I9070_EUR_XX_8G and GT-I9070_EUR_XX_8G_20111220_KL6 and one for 16GB
(at least paired with XEO region XXLD1) not only that one we got in link form 1st post.
I was also able to find some info that if you use .pit check also 'Re-Partition'.
Now I am curious about if It would be good idea for me to actually Re-Partition my phone - bought it used (not new) and my PC detects only 4GB of internal SD. Will it increase custom binary counter? (so far it is at 0 and I would rather keep it that way)
Is it going to fix that issue so I will be able to use all 8GB (minus system partition)?
If so how to use it and what .pit file to take?
.pit only, re-partition only and run it once, then single-package as PDA with reboot and F. Reset on another flash run?
Or maybe all at once?
BTW you guys ROCK.
Rooted SGS i9000 2 years ago with this forum and now I am very close to do it again with SGSA.
th3cr0w said:
From what I was able to find in other guides it is ONLY 'Auto Reboot' and 'F. Reset Time' to be checked.
All others to be unchecked.
There are some posts not to bother with that .pit file that is inside Odin .zip file.
Odin package from sammobile got 2 .pit files for 8GB - GT-I9070_EUR_XX_8G and GT-I9070_EUR_XX_8G_20111220_KL6 and one for 16GB
(at least paired with XEO region XXLD1) not only that one we got in link form 1st post.
I was also able to find some info that if you use .pit check also 'Re-Partition'.
Now I am curious about if It would be good idea for me to actually Re-Partition my phone - bought it used (not new) and my PC detects only 4GB of internal SD. Will it increase custom binary counter? (so far it is at 0 and I would rather keep it that way)
Is it going to fix that issue so I will be able to use all 8GB (minus system partition)?
If so how to use it and what .pit file to take?
.pit only, re-partition only and run it once, then single-package as PDA with reboot and F. Reset on another flash run?
Or maybe all at once?
BTW you guys ROCK.
Rooted SGS i9000 2 years ago with this forum and now I am very close to do it again with SGSA.
Click to expand...
Click to collapse
It is normal to have 4GB on internall SD. The rest of it goes to system partition, application partition and RAM I think...
shut_down said:
It is normal to have 4GB on internal SD. The rest of it goes to system partition, application partition and RAM I think...
Click to expand...
Click to collapse
googled a bit more and found it out too :crying:
BTW - both of those 8GB .pit files are identical (according to 'comp' tool in windows) so there is no reason to use re-partition - other than sth went totally wrong and you are trying to recover from brick or sth serious as this .pit file is already on your device.
Just flashed unbranded stock for XEO region - original one was branded.
NOTE to anyone who is still thinking about safety of this method:
After initial reboot - when it was reconfiguring in recovery mode - or however you will call it (just before odin should say 'pass' - still in that little font screen) windows started to reinstall usb drivers - odin log in bottom corner said 'disconnected' and even then my newly flashed ROM is working as it should. I would rather keep it connected till Odin confirms all went as intended but in case of similar issue - do not get heart attack
odin is used for flashing stock roms only???
Kulwinder Singh said:
odin is used for flashing stock roms only???
Click to expand...
Click to collapse
nope it can also be used to flash custom Roms and kernels though flashing custom kernels via odin will increase your bin counter !
Hello guys...
How are you? I´m new on the i9070 threads!!! I´ve had others phones before, like SG2, xperia sola, live with walkman... so, i need the password to descompress odin... i search on thread but i don´t found it...
SORRY I found the password... shaaan
Of what I understand, can I test an unlimited number of stock firmware and the binary counter remain 0?
If I flash an unbranded firmware can I use SIM cards from other providers?
Now my phone is branded and I can not use SIM cards from other providers.
Thanks.
Kulwinder Singh said:
odin is used for flashing stock roms only???
Click to expand...
Click to collapse
Read please, sir!
http://forum.xda-developers.com/showthread.php?t=1985199
:laugh:
Someone help me? LINK
Hi i have downloaded the russian jelly bean 4.1.2 package but when i tries to flash it using odin3 v1.83 it shows me "The Parameter is incorrect" why???
sonimayurp said:
Hi i have downloaded the russian jelly bean 4.1.2 package but when i tries to flash it using odin3 v1.83 it shows me "The Parameter is incorrect" why???
Click to expand...
Click to collapse
Try to remove .md5 from filename.
shut_down said:
Try to remove .md5 from filename.
Click to expand...
Click to collapse
Hmm it worked thx..
Flash JB
Hi, I want to flash Jelly Bean , do i need to use the pit file , or just select one package and then select the rom??
Edit : flashed
This version of Odin does not work when flashing JB to my device.
I successfully used Odin3v3.07 from this post: http://forum.xda-developers.com/showthread.php?t=2086965
Please update this guide. I spent quite a lot of time trying to figure out what was wrong.
Thanks
Hi Guys I was one of you for a long time then drifted to the darkside with apple. I am back but so much has changed and I want to ensure that I dont goose up.
I have a SM G935F S7 edge
I have contacted my provider and recieved sim unlock code. Placed alternative sim in phone and entered the code and it returned sim unlock. (its a pay as you go sim i used to unlock with no credit so I cant test I can make a call)
I am torn between rooting and not because of my banking app with Barclays, but on the advice of others I would like to try a stock samsung rom without all the bloatware.
I have sith super backup backed up my contacts apps call logs and sms messages and saved them to google drive.
So have I dont all i need before flashing and if so which stock rom can I use. do I simply use the most recent BTU from smmobile for my country or is there a better way to select the rom I should install.
Look forward to your answers but if anyone has Barclays app working on root let me know then I will just take the plunge I care not about the warranty as I have alternative insurance which wouldnt care.
Thanks again in advance
One of the reasons I haven't rooted is for the same reason as you. Barclays are a real pain in the arse to rooted customers. I have tried everything to get around this but nothing can. The only other option is logging in via the website but every so often this requries a card reader so it can be a pain in the arse.
Anyway, to answer your question, you seem to have covered anything. BTU is probably your best option if you would like stock samsung with less bloat. Although, I believe you will not receive any OTA updates and would have to update manually when updates become available.
CuBz90 said:
One of the reasons I haven't rooted is for the same reason as you. Barclays are a real pain in the arse to rooted customers. I have tried everything to get around this but nothing can. The only other option is logging in via the website but every so often this requries a card reader so it can be a pain in the arse.
Anyway, to answer your question, you seem to have covered anything. BTU is probably your best option if you would like stock samsung with less bloat. Although, I believe you will not receive any OTA updates and would have to update manually when updates become available.
Click to expand...
Click to collapse
Thanks,
On Sammobile I just choose the latest one ie most recent date BTU file. correct.
On the Barclays have you tried this
https://www.reddit.com/r/Android/co...rooted_android_using/?st=ixw01bzc&sh=18946981
Hope i am allowed to link to that on here sorry if not
magpie2001k said:
Thanks,
On Sammobile I just choose the latest one ie most recent date BTU file. correct.
On the Barclays have you tried this
https://www.reddit.com/r/Android/co...rooted_android_using/?st=ixw01bzc&sh=18946981
Hope i am allowed to link to that on here sorry if not
Click to expand...
Click to collapse
Yes choose the most recent.
Also, yes I have tried the method on reddit. It did not work for me. I gave up trying in the end and have not rooted my most recent S7.
CuBz90 said:
Yes choose the most recent.
Also, yes I have tried the method on reddit. It did not work for me. I gave up trying in the end and have not rooted my most recent S7.
Click to expand...
Click to collapse
OK cheers I am downloading most recent but without paying even on 100mb ll it is so slow to download...
magpie2001k said:
OK cheers I am downloading most recent but without paying even on 100mb ll it is so slow to download...
Click to expand...
Click to collapse
Yes I always avoid Sammobile due to it's speed. Use this website instead:
http://updato.com/firmware-archive-select-model
CuBz90 said:
Yes I always avoid Sammobile due to it's speed. Use this website instead:
http://updato.com/firmware-archive-select-model
Click to expand...
Click to collapse
Cheers..
I just put into recovery then unzip the firmware. then using ODIN select the BL AP and CP correct then hit start.
I have enabled pin in secure startup
magpie2001k said:
Cheers..
I just put into recovery then unzip the firmware. then using ODIN select the BL AP and CP correct then hit start.
I have enabled pin in secure startup
Click to expand...
Click to collapse
BTU is UK unbranded.
Download this: https://www.sammobile.com/firmwares/download/116121/G935FXXU1BPLB_G935FBTU1BPK3_BTU/ this is the latest
Also download odin 3.11.1 the link is just below the details on the download page.
once everything has finished downloading, backup important data on your phone and put your phone into download mode, unzip the Rom file, there will be 5 files inside, delete CSC_HOME (you don't need it), Flash BL, CP, CSC and AP all with odin, but in odin settings, select Re-partition, F.reset time, Auto-Reboot, then start, the CSC file contains a PIT file which will wipe your phone.
Here is my thread on Sammobile confirming the flash: https://www.sammobile.com/forum/showthread.php?t=34984
I did the same with my S7 Edge to debrand it, I can confirm the Barclays app still works as its Samsung official software it doesn't trip knox, although I'm fed up now of waiting 6 months for android 7 I'm thinking of just going to a custom rom, i'll just use the browsers to goto Barclays.
The only way the Barclays app wont work is if you have ever flashed a custom recovery, rom, or rooted which all trip the knox counter to 0x1
Seanie280672 said:
BTU is UK unbranded.
Download this: https://www.sammobile.com/firmwares/download/116121/G935FXXU1BPLB_G935FBTU1BPK3_BTU/ this is the latest
Also download odin 3.11.1 the link is just below the details on the download page.
once everything has finished downloading, backup important data on your phone and put your phone into download mode, unzip the Rom file, there will be 5 files inside, delete CSC_HOME (you don't need it), Flash BL, CP, CSC and AP all with odin, but in odin settings, select Re-partition, F.reset time, Auto-Reboot, then start, the CSC file contains a PIT file which will wipe your phone.
Here is my thread on Sammobile confirming the flash: https://www.sammobile.com/forum/showthread.php?t=34984
I did the same with my S7 Edge to debrand it, I can confirm the Barclays app still works as its Samsung official software it doesn't trip knox, although I'm fed up now of waiting 6 months for android 7 I'm thinking of just going to a custom rom, i'll just use the browsers to goto Barclays.
The only way the Barclays app wont work is if you have ever flashed a custom recovery, rom, or rooted which all trip the knox counter to 0x1
Click to expand...
Click to collapse
Not sure If I have messed up. I unticked repartition as was the instructions in another thread.
The phone is up but just going through the set up.
magpie2001k said:
Not sure If I have messed up. I unticked repartition as was the instructions in another thread.
The phone is up but just going through the set up.
Click to expand...
Click to collapse
Doesn't really matter to be honest, just means you loose a bit of space as the BTU firmware file is one of the smallest out of the lot due to the lack of bloatware, repartition would have given you this space as user storage, but its not much to be fair.
Seanie280672 said:
Doesn't really matter to be honest, just means you loose a bit of space as the BTU firmware file is one of the smallest out of the lot due to the lack of bloatware, repartition would have given you this space as user storage, but its not much to be fair.
Click to expand...
Click to collapse
Phew...
Still think I might redo it when finished. the reason being is I let samsung reinstall stuf where I feel I should just have loaded super backup on my device then restored that way.
Plus I stupidly said yes to microsoft stuff beacause I need outlook but I dont need all the other crap.
magpie2001k said:
Phew...
Still think I might redo it when finished. the reason being is I let samsung reinstall stuf where I feel I should just have loaded super backup on my device then restored that way.
Plus I stupidly said yes to microsoft stuff beacause I need outlook but I dont need all the other crap.
Click to expand...
Click to collapse
Download BK package disabler from play store and disable anything you like without needing root.
Seanie280672 said:
Download BK package disabler from play store and disable anything you like without needing root.
Click to expand...
Click to collapse
Will do anything that is really a must for disable..
or more importantly anything i must keep
I previosuly bought package disable Pro any difference is it worth me paying £0.99 for it when I already have one.
Hi guys!
So yesterday I installed Folder mount in order to free up some space in the phone's internal memory.
After the installation I rebooted the phone and... it says something like "Device Memory Damaged - the data partition has been corrupted. You need to reset your device to factory default. This will erase all your date..."
Alright now, I don't care about recovering messages, pictures, music or whatsoever. I specifically need to recover an app data, Wechat, that is a Whatsapp alike app. So I need to get the all my conversations back since this stupid application doesn't store in cloud...
So what's the solution? Is there a way to fully backup my phone from PC and then restore it?
Cheers,
Ego
Addition:
I've just noticed on Team Win Recovery (3.0.2-2) that my Internal memory is shown as 0 MB. So I guess it's not detected and foldermount somehow messed up with the partition system... Is there a way to get my partition back? I'm about to cry...
With odin flash your original rom files.
Flash only ap, cp and bl
This will not erase phone.
This sounds good, but is there a way to retrieve the specific rom I flashed? It was quite long ago, I flashed it and then accidentally deleted it...
Any help guys?
Egoquaero said:
Any help guys?
Click to expand...
Click to collapse
You will need to flash your phone using pit file for repartition. If you need link for firmware you should be more specific with you model number
Thanks. Is the model number enough? S7 Edge SM G935F
How's the procedure exactly? I'm quite noob. If you can please give me a link or something. Cheers
What region do you live? Or what CSC you had in phone?
I bought it in Italy under the carrier 3 (Tre). Contract with them. And I live in Italy.
Egoquaero said:
I bought it in Italy under the carrier 3 (Tre). Contract with them. And I live in Italy.
Click to expand...
Click to collapse
Download this firmware: https://www.sammobile.com/firmwares/download/107501/G935FXXU1BPJE_G935FITV1BPJ1_ITV/
It contains 5 files
Also download pit for ITV CSC from here: https://www.sammobile.com/forum/showthread.php?t=30628
Thank you so much.
Is it this one right?
SM-G935F OXA multi CSC ( BTU CPW DBT ITV KOR NEE XEF XEO )
by default : XEF
HERO2LTE_EUR_OPEN.pit
https://drive.google.com/file/d/0Bzy...ew?usp=sharing
And then... what is the exact procedure? Where should I copy the files and how should I use Odin?
Egoquaero said:
Thank you so much.
Is it this one right?
SM-G935F OXA multi CSC ( BTU CPW DBT ITV KOR NEE XEF XEO )
by default : XEF
HERO2LTE_EUR_OPEN.pit
https://drive.google.com/file/d/0Bzy...ew?usp=sharing
And then... what is the exact procedure? Where should I copy the files and how should I use Odin?
Click to expand...
Click to collapse
Yes, is that file, you can follow this tutorial on flashing https://youtu.be/qil5zumfA8w
Before pressing start select pit tab in odin and add pit file. Make sure repartition is ticked. Good luck!
Cheers! I'll let you know
So I've been following the guide you suggested to me, but I'm afraid I might erase my internal memory.
So before proceeding I just wanted to double check with you. I guess the only difference between the guide and what I should do is the fact that I shouldn't select the CSC? Since you told me to flash AP BL and CP, but you didn't say anything about CSC.
Egoquaero said:
So I've been following the guide you suggested to me, but I'm afraid I might erase my internal memory.
So before proceeding I just wanted to double check with you. I guess the only difference between the guide and what I should do is the fact that I shouldn't select the CSC? Since you told me to flash AP BL and CP, but you didn't say anything about CSC.
Click to expand...
Click to collapse
no, only difference is that you will have to select pit file in pit tab after you select those 4 files
So my phone recovered but it deleted my application's data (Wechat conversations...). That was the whole point. Well, I guess now there's no way to recover it, now that I overrode my internal memory with a new installation... :crying::crying::crying:
I'm not blaming on you, usmanmalik, but did you misread my first post by any chance? Because the whole point was to recover this app's data (WeChat).
Egoquaero said:
So my phone recovered but it deleted my application's data (Wechat conversations...). That was the whole point. Well, I guess now there's no way to recover it, now that I overrode my internal memory with a new installation... :crying::crying::crying:
I'm not blaming on you, usmanmalik, but did you misread my first post by any chance? Because the whole point was to recover this app's data (WeChat).
Click to expand...
Click to collapse
You didn't had a chance to recover anything from phone from the begining, because your internal memory was damaged by app you used to free memory, so you rather preffered to have a non working phone?
With odin flash your original rom files.
Flash only ap, cp and bl
This will not erase phone.
Click to expand...
Click to collapse
Then why did you write "This will not erase your phone"?
I guess I got misled by this. And again, I'm not accusing you or blaming on you. Just wondering why you wrote that.
Egoquaero said:
Then why did you write "This will not erase your phone"?
I guess I got misled by this. And again, I'm not accusing you or blaming on you. Just wondering why you wrote that.
Click to expand...
Click to collapse
I didn't write that, some other user did, check again before admiting that
My bad, I'm really sorry about that and thanks for your help
How to get rid of "Ramadan" and Hijri on calendar? SM-G950FD Dual Sim version
EDIT- See last post on page 3 by me. Solution found, and samsung pay also working.
Hello, I got my new S8 dual sim version from ebay today, was shipped from texas, but is the dual sim "DUOS" international version. The calendar app has the orange Ramadan line through it and "Hijri" in the settings. Is there any way at all to get rid of this?
I'm not sure if there is a different OEM rom I can flash in ODIN that would get rid of this. I definitely don't want it in my calendar, along with some different dates I'm not aware of that also show up. I googled it and looks like muslim dates.
I've read that SM-G950F roms are compatible, but what about odin flashing F roms and not FD? Would this solve the problem somehow if there is no other work around?
Screenshot_20170619-221511 by Daniel Rivera, on Flickr
Screenshot_20170619-221539 by Daniel Rivera, on Flickr
Just press on it and then delete
NeedleGames said:
Just press on it and then delete
Click to expand...
Click to collapse
That doesn't work though. You can press on it, shows the date individually, event is there but clicking on it does nothing. Also as far I can tell no way to get rid of the muslim calendar dates also. I want to keep it OEM for now, no root, is there any other international variant OEM rom to flash?
danman132x said:
That doesn't work though. You can press on it, shows the date individually, event is there but clicking on it does nothing. Also as far I can tell no way to get rid of the muslim calendar dates also. I want to keep it OEM for now, no root, is there any other international variant OEM rom to flash?
Click to expand...
Click to collapse
You can choose what calendar sources you want (google, celebrations, facebook etc.) All of them are on by default. You just have to find it in the calendar app and disable that calendar. It is celebrations calendar for sure.
I don't know. I'm thinking it's baked into the ROM for real now. I googled this also and it seems the S7 had the issue also on international variants. But there were some work arounds I think. I tried unselecting all the different calendars. There is none that states celebrations on here.
Screenshot_20170620-090119 by Daniel Rivera, on Flickr
You can flash any firmware (using Odin) from the F version to the FD one with absolutely no issue.
Edit: If you are scared to flash an F firmware, you can flash the Russian one (from the FD) and it wont have any of that "bloatware"
t-shock said:
You can flash any firmware (using Odin) from the F version to the FD one with absolutely no issue.
Edit: If you are scared to flash an F firmware, you can flash the Russian one (from the FD) and it wont have any of that "bloatware"
Click to expand...
Click to collapse
Cool, so would this one work? https://www.sammobile.com/firmwares/galaxy-s8/SM-G950FD/SER/download/G950FXXU1AQF7/172614/
It's an updated version also it seems, as I'm on AQDG and security patch April 1, 2017 and this one is 6-1-17. This won't put the russian alphabet on my phone will it? lol
Mine has the Egypt firmware apparently.
danman132x said:
Cool, so would this one work? https://www.sammobile.com/firmwares/galaxy-s8/SM-G950FD/SER/download/G950FXXU1AQF7/172614/
It's an updated version also it seems, as I'm on AQDG and security patch April 1, 2017 and this one is 6-1-17. This won't put the russian alphabet on my phone will it? lol
Mine has the Egypt firmware apparently.
Click to expand...
Click to collapse
That should do
You can remove the russian keyboard very easily (it is like if you flash a Greek or Italian OS, no big deal)
But be aware. In order to avoid the EGY CSC, you shouldnt have a SIM card while booting for the first time and you should probably use a .pit file
Last but not least, use SamFirm to download the whole firmware (Here) and make sure that you tick the Binary Nature selection on the app (that way, you will get 5 files instead of one and you can completely remove the EGY csc)
t-shock said:
That should do
But be aware. In order to avoid the EGY CSC, you shouldnt have a SIM card while booting for the first time and you should probably use a .pit file
Last but not least, use SamFirm to download the whole firmware (Here) and make sure that you tick the Binary Nature selection on the app (that way, you will get 5 files instead of one and you can completely remove the EGY csc)
Click to expand...
Click to collapse
I'm not exactly sure what you mean by the EGY CSC. What is this exactly? Under software information I see under service provider is EGY/EGY/EGY. I do have straight talk up and running just fine on my S8 using the ATT network, everything works as it should right now.
I'll be sure to have my SIM card removed when flashing in odin and rebooting the 1st time. As of right now, I'm downloading the file from sammobile, the zip file which they say to extract and flash in odin.
I checked that link you sent and found the russian one with the SER region selected and clicked binary nature. So should I not flash the file from Sammobile with odin and use the the link you sent instead?
The tool downloaded the 5 files you said, I have a HOME_CSC file, CSS_OXM... , CP, BL, and AP files. They are all md5 files. So you're saying I should flash these in odin instead of the single file from Sammobile?
Im good at rooting phones and stuff, but only when following guides. The "behind the scenes" stuff I'm not good at since I don't program. This one I'm not rooting right away, just want to do this to try and get rid of the egypt stuff and muslim calendar things.
Heres what I have. It shows 4 places to flash though. The AP, BL, and CP seem straightforward using the files downloaded, but which one of the top 2 files goes in the CSC part?
odintest by Daniel Rivera, on Flickr
danman132x said:
I'm not exactly sure what you mean by the EGY CSC. What is this exactly? Under software information I see under service provider is EGY/EGY/EGY. I do have straight talk up and running just fine on my S8 using the ATT network, everything works as it should right now.
I'll be sure to have my SIM card removed when flashing in odin and rebooting the 1st time. As of right now, I'm downloading the file from sammobile, the zip file which they say to extract and flash in odin.
I checked that link you sent and found the russian one with the SER region selected and clicked binary nature. So should I not flash the file from Sammobile with odin and use the the link you sent instead?
The tool downloaded the 5 files you said, I have a HOME_CSC file, CSS_OXM... , CP, BL, and AP files. They are all md5 files. So you're saying I should flash these in odin instead of the single file from Sammobile?
Im good at rooting phones and stuff, but only when following guides. The "behind the scenes" stuff I'm not good at since I don't program. This one I'm not rooting right away, just want to do this to try and get rid of the egypt stuff and muslim calendar things.
Heres what I have. It shows 4 places to flash though. The AP, BL, and CP seem straightforward using the files downloaded, but which one of the top 2 files goes in the CSC part?
odintest by Daniel Rivera, on Flickr
Click to expand...
Click to collapse
The single file from Sammobile wont help you to remove all the muslim stuff from your phone. On the other hand, a 5-"pack" firmware will debloat your phone completely.
Just put the BL file to the BL option in Odin
AP file to AP option
CP file to CP option
and CSC (NOT HOME_CSC) at the CSC file
Also make sure that you have "extracted" from the CSC .tar.md5 the pit (Just open it with WinRaR and extract the .pit file)
After doing that, open the pit section on the Odin and selete the pit file that you just extracted
t-shock said:
The single file from Sammobile wont help you to remove all the muslim stuff from your phone. On the other hand, a 5-"pack" firmware will debloat your phone completely.
Just put the BL file to the BL option in Odin
AP file to AP option
CP file to CP option
and CSC (NOT HOME_CSC) at the CSC file
Also make sure that you have "extracted" from the CSC .tar.md5 the pit (Just open it with WinRaR and extract the .pit file)
After doing that, open the pit section on the Odin and selete the pit file that you just extracted
Click to expand...
Click to collapse
Thank you. This all worked perfectly. Did every option. Phone is back up and running just fine, Latest software and security patches are installed.
Sadly, the ramadan and muslim dates are still there, still shows EGY under service provider SW version. I guess I'll just have to accept this and can't get rid of it.
danman132x said:
Thank you. This all worked perfectly. Did every option. Phone is back up and running just fine, Latest software and security patches are installed.
Sadly, the ramadan and muslim dates are still there, still shows EGY under service provider SW version. I guess I'll just have to accept this and can't get rid of it.
Click to expand...
Click to collapse
I'm glad that your phone works but I still cannot understand why it didnt change
If you get your hands on a european sim, then you will be able to get rid of the muslim dates etc
t-shock said:
I'm glad that your phone works but I still cannot understand why it didnt change
If you get your hands on a european sim, then you will be able to get rid of the muslim dates etc
Click to expand...
Click to collapse
Hello t-shock I'm hoping you'll see this, but I ordered me a Russian Sim card on ebay so I can change to the SER hopefully. Would I follow the same steps again? You did say make sure not to have my Sim card in when booting for the first time, but wouldn't I want to have it in so it can read it and hopefully change? Since when I did it with no Sim cars inserted, it didn't change. Now I'm trying to change my csc to get Samsung pay to work, and it looks like it should on Russian phones since its been released there.
I've tried everything else and I can't even pull up the multi csc menu, even though it shows EGY should be part of the multi csc pack.
danman132x said:
Hello t-shock I'm hoping you'll see this, but I ordered me a Russian Sim card on ebay so I can change to the SER hopefully. Would I follow the same steps again? You did say make sure not to have my Sim card in when booting for the first time, but wouldn't I want to have it in so it can read it and hopefully change? Since when I did it with no Sim cars inserted, it didn't change. Now I'm trying to change my csc to get Samsung pay to work, and it looks like it should on Russian phones since its been released there.
I've tried everything else and I can't even pull up the multi csc menu, even though it shows EGY should be part of the multi csc pack.
Click to expand...
Click to collapse
Hi
Put the Sim on the phone and repeat the step that I have said.
But make sure that you use the pit file and also the csc (not home_csc)
Were you able to get rid of EGY? I'm in the same boat.
I think you should flash multi-CSC firmware that contains CSC you want to get. I have NEE/NEE/XSG, no muslim stuff. OXM firmware.
As I have had same satuition. EGY is included in Multi-CSC OXM, you can't change CSC by odin flashing another Multi-CSC OXM firmware.
I tried flash VD2(Germany Vodafone) then it became VD2/VD2/EGY but if I flash other CSC included in Multi-CSC OXM, it go back to EGY/EGY/EGY. I'm gonna just root my phone now.
I got my phone from Dubai, inserted finnish SIM card and turned on the phone. It automatically changed CSCs to NEE, which is correct for me.
zerosource said:
Were you able to get rid of EGY? I'm in the same boat.
Click to expand...
Click to collapse
Presterin said:
I think you should flash multi-CSC firmware that contains CSC you want to get. I have NEE/NEE/XSG, no muslim stuff. OXM firmware.
Click to expand...
Click to collapse
I'm waiting on my Russian Sim card to come in the mail, then I will try to change to the SER csc, which Samsung pay should work for. Hoping it changes. Apparently from reading above, if you have a multi csc like the EGY I have, you can't flash another one. That's why when I initially flashed the SER csc through Odin, in a multi part file, it didn't change. HOPING it will change when I get my Russian Sim card.
P1226R said:
As I have had same satuition. EGY is included in Multi-CSC OXM, you can't change CSC by odin flashing another Multi-CSC OXM firmware.
I tried flash VD2(Germany Vodafone) then it became VD2/VD2/EGY but if I flash other CSC included in Multi-CSC OXM, it go back to EGY/EGY/EGY. I'm gonna just root my phone now.
Click to expand...
Click to collapse
Can you clarify please? I'm assuming you had EGY csc also. Is that why when I flash SER csc (Russian) it didn't change anything? But VD2 is not multi csc package and that's why it changed? I don't really care what firmware I'm on now as long Samsung pay will work and it doesn't have all the bloat ware. I was told Russian software has some of the least bloat. Will changing my Sim card change the csc?
I read that I can install the firmeware of sm-935U in my sm-935V, but when i enter in sammobile page ,there is a huge list of 935U firmeware, wich of those do i have to select to work fine in my phone
If you look at the numbers they are all the same.
Just be sure to flash the CSC fine and not the Home_CSC one when changing the firmware. Remove all the google users first too. All your apps will be deleted.
SoNic67 said:
If you look at the numbers they are all the same.
Just be sure to flash the CSC fine and not the Home_CSC one when changing the firmware. Remove all the google users first too. All your apps will be deleted.
Click to expand...
Click to collapse
How do I know whic CSC im downloading , cause there is only 2 options, PDA and CSS, and the other doubt I have, wich version of odin is usefull to install the rom?
It's just one zip file. Get the latest one (from 04/2019)... like this one for PDA G935UUES9CSC2 and CSC G935UOYM9CSC2:
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935U/VZW/download/G935UUES9CSC2/265864/
Extract before using Odin.
SoNic67 said:
It's just one zip file. Get the latest one (from 04/2019)... like this one for PDA G935UUES9CSC2 and CSC G935UOYM9CSC2:
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935U/VZW/download/G935UUES9CSC2/265864/
Extract before using Odin.
Click to expand...
Click to collapse
do you have the version of odin available for do it, I have used a version but it got me an error
SoNic67 said:
If you look at the numbers they are all the same.
Just be sure to flash the CSC fine and not the Home_CSC one when changing the firmware. Remove all the google users first too. All your apps will be deleted.
Click to expand...
Click to collapse
I did a similar flash but didn't remove google users. The factory reset protection messages appeared, I entered credentials, and things started reloading. What else did the factory reset protection do that I don't what it to do?