Related
Hi.
I need help i want to know how to install JELLYBLAST V3.0.3 on my galaxy y pro GT-B5510
i read on this post JELLYBLAST V3 that with some modification it can be installed on Galaxy Y Pro
THANKS
nedo113 said:
Hi.
I need help i want to know how to install JELLYBLAST V3.0.3 on my galaxy y pro GT-B5510
i read on this post JELLYBLAST V3 that with some modification it can be installed on Galaxy Y Pro
THANKS
Click to expand...
Click to collapse
1) download jellyblast + 4 OTA + CWM
2) open jellyblast zip ed delete "boot.img"
3) copy rom + 4 ota + CWM inside SD
4) reboot in recovery mode (vol up + home + power) and select CWM.zip
5) Backup your rom via CWM (backup and restore) [REQUIRED STEP! This take some time but you can restore previous rom and all you had before (apps, calls... everithing) in case of problems!]
6) Run " wipe data/factory reset" and " wipe cache partition" ("wipe data/factory reset" delete everithing from your device!)
7) Run "install zip from sdcard" > "choose zip"
8) Select jellyblast rom > "yes"
9) Than "reboot system now"
For ota:
1) Reboot in recovery mode (no need flash CWM again...)
2)Select "apply update"
4) choose first OTA
5) reboot
6) same for other ota (pass 1 to 5)
Install OTA update in number order (OTA 1, OTA 2...)
(Thanks to Roby293)
I tried this steps yesterday.
Full working for me, the rom is very smooth & fast.
Just some force stop to Phone process and PIN Dial pad not working.
Some people say fix this flashing "modem" & "csc" via ODIN.
But i'm not really sure.
Sorry for delay. Hope this help someone else.
Thanks
ciccione said:
1) download jellyblast + 4 OTA + CWM
2) open jellyblast zip ed delete "boot.img"
3) copy rom + 4 ota + CWM inside SD
4) reboot in recovery mode (vol up + home + power) and select CWM.zip
5) Backup your rom via CWM (backup and restore) [REQUIRED STEP! This take some time but you can restore previous rom and all you had before (apps, calls... everithing) in case of problems!]
6) Run " wipe data/factory reset" and " wipe cache partition" ("wipe data/factory reset" delete everithing from your device!)
7) Run "install zip from sdcard" > "choose zip"
8) Select jellyblast rom > "yes"
9) Than "reboot system now"
For ota:
1) Reboot in recovery mode (no need flash CWM again...)
2)Select "apply update"
4) choose first OTA
5) reboot
6) same for other ota (pass 1 to 5)
Install OTA update in number order (OTA 1, OTA 2...)
(Thanks to Roby293)
I tried this steps yesterday.
Full working for me, the rom is very smooth & fast.
Just some force stop to Phone process and PIN Dial pad not working.
Some people say fix this flashing "modem" & "csc" via ODIN.
But i'm not really sure.
Sorry for delay. Hope this help someone else.
Click to expand...
Click to collapse
Thanks my friend full working for me too
danhtien088 said:
helllo
Click to expand...
Click to collapse
this is not chatting site pal to say hello....ask q if u have any....
Hi! This rom works in GT-B5510 with all OTA Updates installed? Another question; I have a GT-B5510L You guys think the rom will work?
Suuichi said:
Hi! This rom works in GT-B5510 with all OTA Updates installed? Another question; I have a GT-B5510L You guys think the rom will work?
Click to expand...
Click to collapse
Yup it works with that device
Please press thanx if I am useful to you
ciccione said:
1) download jellyblast + 4 OTA + CWM
2) open jellyblast zip ed delete "boot.img"
3) copy rom + 4 ota + CWM inside SD
4) reboot in recovery mode (vol up + home + power) and select CWM.zip
5) Backup your rom via CWM (backup and restore) [REQUIRED STEP! This take some time but you can restore previous rom and all you had before (apps, calls... everithing) in case of problems!]
6) Run " wipe data/factory reset" and " wipe cache partition" ("wipe data/factory reset" delete everithing from your device!)
7) Run "install zip from sdcard" > "choose zip"
8) Select jellyblast rom > "yes"
9) Than "reboot system now"
For ota:
1) Reboot in recovery mode (no need flash CWM again...)
2)Select "apply update"
4) choose first OTA
5) reboot
6) same for other ota (pass 1 to 5)
Install OTA update in number order (OTA 1, OTA 2...)
(Thanks to Roby293)
I tried this steps yesterday.
Full working for me, the rom is very smooth & fast.
Just some force stop to Phone process and PIN Dial pad not working.
Some people say fix this flashing "modem" & "csc" via ODIN.
But i'm not really sure.
Sorry for delay. Hope this help someone else.
Click to expand...
Click to collapse
Hi friend
thanks for your help but i need it one more time
I do not get to use symbols, numbers on the keyboard only letters
to put numbers I have to use the onscreen keyboard but the screen is too small for typing with it so i would like fix it
do you have any idea??
i use it in spanish language
nedo113 said:
Hi friend
thanks for your help but i need it one more time
I do not get to use symbols, numbers on the keyboard only letters
to put numbers I have to use the onscreen keyboard but the screen is too small for typing with it so i would like fix it
do you have any idea??
i use it in spanish language
Click to expand...
Click to collapse
I'm having the same problem, and another ones... the customized keys (1 and 2), Backspace and Enter keys doesn't work, the camera can't be used in 3.15MP and most of apps doesn't install, just keep saying "downloading"
for problem with device/hardware keyboard, please copy keylayout and keychars from your stock rom into jellyblast (System/Usr)
dont delete the existing folder in jellyblast, just replace the existing files. the flash the modded jellybean rom again.
your keyboard will be working, overall keyboard function is ok, but i cant get symbol button working yet..
im using this, almost perfect but phone application looks bad because of the landscape view of our phone.
for camera, you can replace it with camera.apk from your stock rom. (system/app folder)
update: just wanna share, cant copy camera from stock rom, becuase stock is odexed. so, to get 3.2mp camera working, i downloaded ported jellyblast rom for galaxy mini pop plus, extracted it,copy camera.apk from system/apps and install on your phone.
suuchi, for 'apps doesnt install' problem, u need to remove a2sd or disable it before flashing the rom.
found today out position sensor not working properly..horizontal calibration wont help
update: got it working already, need to copy sensor file system/bin and system/lib folder from stock rom.
xshiro said:
for problem with device/hardware keyboard, please copy keylayout and keychars from your stock rom into jellyblast (System/Usr)
dont delete the existing folder in jellyblast, just replace the existing files. the flash the modded jellybean rom again.
your keyboard will be working, overall keyboard function is ok, but i cant get symbol button working yet..
im using this, almost perfect but phone application looks bad because of the landscape view of our phone.
for camera, you can replace it with camera.apk from your stock rom. (system/app folder)
update: just wanna share, cant copy camera from stock rom, becuase stock is odexed. so, to get 3.2mp camera working, i downloaded ported jellyblast rom for galaxy mini pop plus, extracted it,copy camera.apk from system/apps and install on your phone.
suuchi, for 'apps doesnt install' problem, u need to remove a2sd or disable it before flashing the rom.
Click to expand...
Click to collapse
I solved the symbol's problem using an app called 'Game Keyboard'. With the compatibility options the buttons will work properly. Can you upload the camera.apk? Thanks a lot!
Suuichi said:
I solved the symbol's problem using an app called 'Game Keyboard'. With the compatibility options the buttons will work properly. Can you upload the camera.apk? Thanks a lot!
Click to expand...
Click to collapse
ooh..thanks bro
i have attached camera apk here
xshiro said:
found today out position sensor not working properly..horizontal calibration wont help
update: got it working already, need to copy sensor file system/bin and system/lib folder from stock rom.
Click to expand...
Click to collapse
Hi! I've been using this rom for 3 days, it works really fast and smooth. I just need to fix the sensor's problem. Can you tell me which files I need to copy? Thanks!
Suuichi said:
Hi! I've been using this rom for 3 days, it works really fast and smooth. I just need to fix the sensor's problem. Can you tell me which files I need to copy? Thanks!
Click to expand...
Click to collapse
im not sure which sensor file that responsible for screen position, so i just copied all sensor related file ..hehe...
the files are
system/bin
- atx
-memsicd
system/lib
-libacc.so
-libsensorservice.so
-libaccsensorcal.so
-libaccelcal.so
-libaccsensorcaltest.so
what i did was, using the root explorer (setting - mount / and /system as writable is checked) delete all the existing sensor file, then copy paste, because the explorer cannot replace the existing files.
then i set the permission back..to enable 'read write exec' for all user group...
then restart the phone..
you will notice horizontal calibration app wont show the correct position (maybe you need to replace horizontal calibration app also), but your sensor is working by using sensor diagnostic (dial *#0*#)
bro do have any solution for dialer/phone app not displayed correctly?
xshiro said:
im not sure which sensor file that responsible for screen position, so i just copied all sensor related file ..hehe...
the files are
system/bin
- atx
-memsicd
system/lib
-libacc.so
-libsensorservice.so
-libaccsensorcal.so
-libaccelcal.so
-libaccsensorcaltest.so
what i did was, using the root explorer (setting - mount / and /system as writable is checked) delete all the existing sensor file, then copy paste, because the explorer cannot replace the existing files.
then i set the permission back..to enable 'read write exec' for all user group...
then restart the phone..
you will notice horizontal calibration app wont show the correct position (maybe you need to replace horizontal calibration app also), but your sensor is working by using sensor diagnostic (dial *#0*#)
bro do have any solution for dialer/phone app not displayed correctly?
Click to expand...
Click to collapse
Thanks! You are awesome! I tried to modify or replace the phone.apk, but didn't work... If I find a solution, I will post it here!
Suuichi said:
Thanks! You are awesome! I tried to modify or replace the phone.apk, but didn't work... If I find a solution, I will post it here!
Click to expand...
Click to collapse
ok,..currently using exdialer
now occasionally will have problem with flickering screen with some apps...suspect power management issue...
HELP PLZ
I was trying to flash the Jelly Blast Rom to my B5510L... but I think I forgot to delete the boot.img file
Now my phone is not loading and only half the screen shows. Help plz.
---------- Post added at 03:25 AM ---------- Previous post was at 02:47 AM ----------
xshiro said:
ok,..currently using exdialer
now occasionally will have problem with flickering screen with some apps...suspect power management issue...
Click to expand...
Click to collapse
I was trying to flash the Jelly Blast Rom to my B5510L... but I think I forgot to delete the boot.img file
Now my phone is not loading and only half the screen shows. Help plz.
Wondering if a clockwork back up could get me back the kernel?
zip not opening
brothers whenever i try to install zip fro cwm , it gives error like zip opening failed.
i hv installed the zip package of jelly blast without deleting boot.img nd it didnt give any error while opening zip but after installation i was facing half screen error.
so i m assuming that when i delete boot.img nd re zip the file at that point i m doing some mistake.
is thr some specific zip format or compression ratio which i should have to consider while zipping it?
far4z said:
brothers whenever i try to install zip fro cwm , it gives error like zip opening failed.
i hv installed the zip package of jelly blast without deleting boot.img nd it didnt give any error while opening zip but after installation i was facing half screen error.
so i m assuming that when i delete boot.img nd re zip the file at that point i m doing some mistake.
is thr some specific zip format or compression ratio which i should have to consider while zipping it?
Click to expand...
Click to collapse
When you download the Rom zip do not unzip it... Open the rom zip in winrar or 7zip and then delete the boot.img file from the compressed zp
Mariofrith said:
I was trying to flash the Jelly Blast Rom to my B5510L... but I think I forgot to delete the boot.img file
Now my phone is not loading and only half the screen shows. Help plz.
---------- Post added at 03:25 AM ---------- Previous post was at 02:47 AM ----------
I was trying to flash the Jelly Blast Rom to my B5510L... but I think I forgot to delete the boot.img file
Now my phone is not loading and only half the screen shows. Help plz.
Wondering if a clockwork back up could get me back the kernel?
Click to expand...
Click to collapse
yes you can. if you have backup your stock rom using cmw, you know the combination key to recovery? press vol up + home + power on
then select update zip from sdcard, select cmw.zip -> restore
or you can take out your sdcard copy the correct jellyblast zip, with deleted boot.img. reflash again, bro make sure you have disable/removed a2sd for smooth installation
ROOTING SAMSUNG GALAXY Y CDMA SCH i509 & GT-S5360
I make all my disclaimers. I am not responsible if you screw your phone, or any nuclear wars or epidemics caused by this guide.
FOLLOW THE INSTRUCTIONS CAREFULLY. IT'S A 100% WORKING GUIDE, PROVIDED, YOU FOLLOW ALL THE STEPS PROPERLY.
PLEASE ENSURE THAT YOU HAVE ENABLED USB DEBUGGING IN Settings>Applications>development>usb debugging.
First of all download the two zip files attached. ie universal root...... and delete files signed.zip
delete files-signed.zip will delete 3 apps from your /system folder, ie quickoffice.apk, maps.apk and samsung apps.apk. Deleting some apps is necessary to free some space in the system for superuser files and binaries to be added.
if u need any of the above mentioned apps or want to remove some other apps, refer to this thread:http://forum.xda-developers.com/showthread.php?t=2058944
Modify updater script the way you like, place it back in the same directory, create its .zip file and sign it using a .zip signer.
Next, place the two zips in the root of your phone's SD card.
boot into recovery by pressing---> vol. up + home key+ power button simultaneously.
after entering the recovery mode, select "apply update from SD card" (to select, we press the home button, scrolling through options is done by pressing volume keys) and select the 'delete apps-signed.zip' (or your own apps delete zip if you modified the one downloaded).
Again repeat the above step, but this time choose apply update from SD card> universal_GB_root_v25.zip> yes.
done..!!! you have successfully rooted your phone..!!! .:good:
power on your phone.
Check for a superSU, and root validator icons in the menu.
If not present, no need to worry, download them from play store.
open root validator. and check for root.
If not rooted, repeat this whole process again.
PLEASE PRESS THANKS IF I HELPED.
MY DEVICES:
Motorola defy plus MB526 running on Android 4.4.2 (Cyanogenmod 11 by QUARX)
Samsung Galaxy y CDMA SCH i509
Ubislate 7C+
Wrong place. Thread belongs to General Section.
not able to root samsung sch-i509 cdma
please help me i am not able to root samsung sch-i509 cdma i have tried universal gb root nothing happen i donot have root access
shubhu2604 said:
ROOTING SAMSUNG GALAXY Y CDMA SCH i509 & GT-S5360
I make all my disclaimers. I am not responsible if you screw your phone, or any nuclear wars or epidemics caused by this guide.
FOLLOW THE INSTRUCTIONS CAREFULLY. IT'S A 100% WORKING GUIDE, PROVIDED, YOU FOLLOW ALL THE STEPS PROPERLY.
PLEASE ENSURE THAT YOU HAVE ENABLED USB DEBUGGING IN Settings>Applications>development>usb debugging.
First of all download the two zip files attached. ie universal root...... and delete files signed.zip
delete files-signed.zip will delete 3 apps from your /system folder, ie quickoffice.apk, maps.apk and samsung apps.apk. Deleting some apps is necessary to free some space in the system for superuser files and binaries to be added.
if u need any of the above mentioned apps or want to remove some other apps, refer to this thread:http://forum.xda-developers.com/showthread.php?t=2058944
Modify updater script the way you like, place it back in the same directory, create its .zip file and sign it using a .zip signer.
Next, place the two zips in the root of your phone's SD card.
boot into recovery by pressing---> vol. up + home key+ power button simultaneously.
after entering the recovery mode, select "apply update from SD card" (to select, we press the home button, scrolling through options is done by pressing volume keys) and select the 'delete apps-signed.zip' (or your own apps delete zip if you modified the one downloaded).
Again repeat the above step, but this time choose apply update from SD card> universal_GB_root_v25.zip> yes.
done..!!! you have successfully rooted your phone..!!! .:good:
power on your phone.
Check for a superSU, and root validator icons in the menu.
If not present, no need to worry, download them from play store.
open root validator. and check for root.
If not rooted, repeat this whole process again.
PLEASE PRESS THANKS IF I HELPED.
MY DEVICES:
Motorola defy plus MB526 running on Android 4.4.2 (Cyanogenmod 11 by QUARX)
Samsung Galaxy y CDMA SCH i509
Ubislate 7C+
Click to expand...
Click to collapse
Bro can u please provide a zip for reinstalling those deleted app...
By the way thanks Bro :beer:
abhijaincha said:
Bro can u please provide a zip for reinstalling those deleted app...
By the way thanks Bro :beer:
Click to expand...
Click to collapse
samsung apps - not needed as just a poor copy of the playstore
maps - download from playstore
quickoffice - download from playstore else there are much better alternatives that require less space if you want to open an office document
and please dont quote the entire first post - its against xda rules
marcussmith2626 said:
samsung apps - not needed as just a poor copy of the playstore
maps - download from playstore
quickoffice - download from playstore else there are much better alternatives that require less space if you want to open an office document
Click to expand...
Click to collapse
We require it incase, we need to go to service center..
abhijaincha said:
We require it incase, we need to go to service center..
Click to expand...
Click to collapse
flash stock rom via odin - will put the phone back to how it was the very first time you switched it on
just reinstalling them apps wont be good enough as your phone would still be rooted
barinder preet said:
please help me i am not able to root samsung sch-i509 cdma i have tried universal gb root nothing happen i donot have root access
Click to expand...
Click to collapse
did you use this same method..?
follow the steps correctly and carefully again buddy. Its 100% working.
hmmmmm
I'm not sure if effective
A Small Correction
To enter recovery mode in Y CDMA (i509)
1. Switch on the phone
2. Once you see the "samsungmobile" logo, keep the volume up button pressed till you enter recovery mode.
That's it
How can root micromax a65 without computer? Please plz plz help me.bro
spknair said:
To enter recovery mode in Y CDMA (i509)
1. Switch on the phone
2. Once you see the "samsungmobile" logo, keep the volume up button pressed till you enter recovery mode.
That's it
Click to expand...
Click to collapse
Thanks man. This is the correct method.
my samsung galaxy y cdma is not going to boot recovery
BOYS I GOT IT!!!!!!!!!!! HERE IS THE FINAL SOLUTION FOR G.P.S. FC'S!!!
The problem is caused by libjavacore.so Arter released a fix for (what i think) lollipop releases only for info, DONT FLASH!. it forces a bootloop for 4.4.4.
BUUUUUUT Markox89 released this issue fixer but i was scared of destroying all optimzed libs and data from archidroid. so i copied Markox89s libjavacore.so aaaaaaaand it works!!!!
So step by step now:
1. download attached libjavacore.rar AND EXTRACT!!!!
2. Put the libjavacore.so somewhere on your phone
3. restart to TWRP (recovery)
4. make a nandroid backup (to be save if bootloop) --> full backup
5. open up mount and mount system
6. go to advanced and open file manager
7. now copy the new libjavacore.so (press on it and copy)
8. go to /system/lib
9. paste it
10. not sure if necessary but i pressed on libjavacore.so and sed chmod 755
11. reboot problem solved!!!!!!!!!!!
12. wipe data and cache from gps to avoid wakelock (go to settings-->apps-->g.p.s. (google play service)--> clear cache & manage space-->clear all data)!
13. install myandroidtools from playstore
14. reboot.
15. open myandroidtools --> services --> system
16. go to Google Play Services and google-services-framework and enable (make a tick at) at "System update service". (this will stop the google play services wakelock) BUT you need to tick it every restart. Keep on reading and you will find a solution to fix that automatically, but myandoidtools is nice to verify if it worked or not.
17. reboot. and your done
wakelock solution:
1. use boeffla kernel NOT THE NG (i9300 for 4.4.4 CM11.0 kernel - Stable )
2. enable init.d support in boeffla app under settings-->kernel start actions
3. download following script and put it in init folder like describted in Method #1: init.d Script
4. restart Phone
IF THAT DOESNT WORK and you still have update service wakelook. install universal init.d from playstore: https://play.google.com/store/apps/...sal.init.d&utm_source=//apk-freedownload.com/
You can check the wakelocks via wakelockdetector unplug your phone and wait at least 15 min.
now you never need to enable "System update service" after roboot by yourself
edit: after 4 months of use the error appeared again. couldn't fix it with doing the tutorial again. needed to reinstall my rom and did the tutorial afterwards. everything fine now
Hint: i dont get money for that information or anything else but try neatrom (the 4.4.4 version - AOSP) http://forum.xda-developers.com/galaxy-s3/development/rom-i9300-aosp-neatrom-v5-8-t2603155 its running like a charm. combine it with boeffla kernel omni
http://boeffla.df-kunde.de/sgs3/boef...omni11/stable/ and u have a way more stable system than we have with this patch (and way less wakelocks )
twinko said:
BOYS I GOT IT!!!!!!!!!!! HERE IS THE FINAL SOLUTION FOR G.P.S. FC'S!!!
The problem is caused by libjavacore.so Arter released a fix for (what i think) lollipop releases only for info, DONT FLASH!. it forces a bootloop for 4.4.4.
BUUUUUUT Markox89 released this issue fixer but i was scared of destroying all optimzed libs and data from archidroid. so i copied Markox89s libjavacore.so aaaaaaaand it works!!!!
So step by step now:
1. download attached libjavacore.rar AND EXTRACT!!!!
2. Put the libjavacore.so somewhere on your phone
3. restart to TWRP (recovery)
4. make a nandroid backup (to be save if bootloop) --> full backup
5. open up mount and mount system
6. go to advanced and open file manager
7. now copy the new libjavacore.so (press on it and copy)
8. go to /system/lib
9. paste it
10. not sure if necessary but i pressed on libjavacore.so and sed chmod 755
11. reboot problem solved!!!!!!!!!!!
12. wipe data and cache from gps to avoid wakelock!
13. install myandroidtools from playstore
14. reboot.
15. open myandroidtools --> services --> system
16. go to Google Play Services and google-services-framework and enable (make a tick at) at "System update service". (this will stop the google play services wakelock) BUT you need to tick it every restart.
17. reboot. and your done
wakelock solution:
1. use boeffla NG kernel (i9300 for 4.4.4 CM11.0 NG kernel - Stable: 2.8 )
2. enable init.d support in boeffla app under settings-->kernel start actions
3. download following script and put it in init folder like describted in Method #1: init.d Script
4. restart Phone
now you never need to enable "System update service" after roboot by yourself
Click to expand...
Click to collapse
Perfect! Thank you very much :good:
MATE MATE, thank you! Works!
cant find lib
there's only a bin folder when i go in "system" what can i do?
robbros said:
there's only a bin folder when i go in "system" what can i do?
Click to expand...
Click to collapse
yes because u didnt followed my instructions! do it step by step! do everything i wrote down and you will find the solution.
is there any way without wipping data ?????
i just did the cach and dalvik cach but still its stock on booting animation
rezadentevil said:
is there any way without wipping data ?????
i just did the cach and dalvik cach but still its stock on booting animation
Click to expand...
Click to collapse
you got me wrong. i rwote "12. wipe data and cache from gps". that means go to settings-->apps-->g.p.s. (google play service)--> clear cache & manage space-->clear all data.
iam not sure what do you talk about in your second sentence. i have no idea why do you have a bootloop. only reason could be you downloaded arters libjavacore.so. As i wrote DO NOT flash his file, its for 5.1 (lollipop)
twinko said:
you got me wrong. i rwote "12. wipe data and cache from gps". that means go to settings-->apps-->g.p.s. (google play service)--> clear cache & manage space-->clear all data.
iam not sure what do you talk about in your second sentence. i have no idea why do you have a bootloop. only reason could be you downloaded arters libjavacore.so. As i wrote DO NOT flash his file, its for 5.1 (lollipop)
Click to expand...
Click to collapse
hi bro
i had a backup of my rom just like u said. and i should thankyou,
i downloaded the app < myandroidtools>
this app fix my problem, i just went to services\system\and oppend the google paly services and unticked all 144 prmessions<(make the red)
and its comletely disabeled, and when i connect to internet , it aint run anymore
thanx alot bro
rezadentevil said:
hi bro
i had a backup of my rom just like u said. and i should thankyou,
i downloaded the app < myandroidtools>
this app fix my problem, i just went to services\system\and oppend the google paly services and unticked all 144 prmessions<(make the red)
and its comletely disabeled, and when i connect to internet , it aint run anymore
thanx alot bro
Click to expand...
Click to collapse
omg. thats not a solution, u need gps. its not helpful if u completely disable it. follow my instructions step by step and you have a solution that really works.
twinko said:
omg. thats not a solution, u need gps. its not helpful if u completely disable it. follow my instructions step by step and you have a solution that really works.
Click to expand...
Click to collapse
i tried again and im stock in bootloop....,
im using DN4 ROM ...,
and i downloaded the attched file,that u did uploaded
what do u suggest??
rezadentevil said:
i tried again and im stock in bootloop....,
im using DN4 ROM ...,
and i downloaded the attched file,that u did uploaded
what do u suggest??
Click to expand...
Click to collapse
Dude you are using a Note II. you see this thread its posted in a Samsung galaxy s3 subforum
Try to look for a fix in the note 2 part of xda
but anyway, good to know that it's not working for note 2
My suggestion. check for a 4.4.4 note2 rom that fixed the gps error. download the rom, extract it on your pc. go to /system/lib and copy the libjavacore.rar. with that libjavacore.rar you try my fix.
twinko said:
Dude you are using a Note II. you see this thread its posted in a Samsung galaxy s3 subforum
Try to look for a fix in the note 2 part of xda
but anyway, good to know that it's not working for note 2
My suggestion. check for a 4.4.4 note2 rom that fixed the gps error. download the rom, extract it on your pc. go to /system/lib and copy the libjavacore.rar. with that libjavacore.rar you try my fix.
Click to expand...
Click to collapse
dear twinko
look bro i know what am i doing,its I9300..., U got me wrong....,
The Md4 is a 4.4.4 Rom of Note4 for the GS3....,
heres the link
http://forum.xda-developers.com/galaxy-s3/development/m-d-4-tw-4-4-4-mody-rom-tw-4-4-2-l-n-t3005765
rezadentevil said:
dear twinko
look bro i know what am i doing,its I9300..., U got me wrong....,
The Md4 is a 4.4.4 Rom of Note4 for the GS3....,
heres the link
http://forum.xda-developers.com/galaxy-s3/development/m-d-4-tw-4-4-4-mody-rom-tw-4-4-2-l-n-t3005765
Click to expand...
Click to collapse
oh sorry i only found the original note rom.
so it looks like my fix doesnt work if your custom rom uses parts from note or as i saw s5. try using archidroid 3.0.2
Wohooooo!! Works like a charm!
Thank you soooooo much twinko!!
Kudos to you for the step by step procedure. What a relief!
:good::good:
twinko said:
BOYS I GOT IT!!!!!!!!!!! HERE IS THE FINAL SOLUTION FOR G.P.S. FC'S!!!
The problem is caused by libjavacore.so Arter released a fix for (what i think) lollipop releases only for info, DONT FLASH!. it forces a bootloop for 4.4.4.
BUUUUUUT Markox89 released this issue fixer but i was scared of destroying all optimzed libs and data from archidroid. so i copied Markox89s libjavacore.so aaaaaaaand it works!!!!
So step by step now:
1. download attached libjavacore.rar AND EXTRACT!!!!
2. Put the libjavacore.so somewhere on your phone
3. restart to TWRP (recovery)
4. make a nandroid backup (to be save if bootloop) --> full backup
5. open up mount and mount system
6. go to advanced and open file manager
7. now copy the new libjavacore.so (press on it and copy)
8. go to /system/lib
9. paste it
10. not sure if necessary but i pressed on libjavacore.so and sed chmod 755
11. reboot problem solved!!!!!!!!!!!
12. wipe data and cache from gps to avoid wakelock (go to settings-->apps-->g.p.s. (google play service)--> clear cache & manage space-->clear all data)!
13. install myandroidtools from playstore
14. reboot.
15. open myandroidtools --> services --> system
16. go to Google Play Services and google-services-framework and enable (make a tick at) at "System update service". (this will stop the google play services wakelock) BUT you need to tick it every restart.
17. reboot. and your done
wakelock solution:
1. use boeffla NG kernel (i9300 for 4.4.4 CM11.0 NG kernel - Stable: 2.8 )
2. enable init.d support in boeffla app under settings-->kernel start actions
3. download following script and put it in init folder like describted in Method #1: init.d Script
4. restart Phone
now you never need to enable "System update service" after roboot by yourself
Click to expand...
Click to collapse
Can anyone make a flashable zip out of this?
incognitonk said:
Can anyone make a flashable zip out of this?
Click to expand...
Click to collapse
just follow the step by step tutorial. lazy dude!
twinko said:
just follow the step by step tutorial. lazy dude!
Click to expand...
Click to collapse
My phone went into a bootloop as soon as I replaced the lib file. I didnt even get a chance to set permissions.
A flashable zip would be more helpful.
Also, I have already used the technique one time before to fix the error, but it reappeared again for some reason. So, a flashable zip would be easier than manually replacing a file every time the problem resurfaces.
incognitonk said:
My phone went into a bootloop as soon as I replaced the lib file. I didnt even get a chance to set permissions.
A flashable zip would be more helpful.
Also, I have already used the technique one time before to fix the error, but it reappeared again for some reason. So, a flashable zip would be easier than manually replacing a file every time the problem resurfaces.
Click to expand...
Click to collapse
ok so give me some more details. u using twrp as recovery? wich kernel, wich rom? did u changed something after fixing it with my tut after the first time?
Hi, thanks for sharing this! Really help me out, nice work!
Btw anyone have link for the init.d script? Its seems link broken and link for the "method #1" too please.
Thankss
Sent from my Oneplus One using Tapatalk
poemsme said:
Hi, thanks for sharing this! Really help me out, nice work!
Btw anyone have link for the init.d script? Its seems link broken and link for the "method #1" too please.
Thankss
Sent from my Oneplus One using Tapatalk
Click to expand...
Click to collapse
both links are working for me, try a different browser or reconnect
good to hear that i could help you
FILE CREAKOZ TOOLS FIX XPOSED.rar :
DOWNLOAD drive.google.com/file/d/0B-BOX9BjUyTScUNJblROa3pmZTg/view?usp=sharing
____________________________________________________________________
hold shift and right click folder ROOT ZENFONE+TWRP
and select open command windows here
type this command do you want to choose:
for intall twrp
1) fastboot flash recovery TWRP-2870_Zenfone5.img
install root
1) root
Install xposed framework ( fix problem kit kat 4.4.2 zenfone5 - firmware 2.22.40.54 )
First download this file if your phone not rooted and not install twrp
open droidboot to flash ( power+volume up key )
hold shift and right click folder ROOT ZENFONE+TWRP
and select open command windows here
type this command do you want to choose
for intall twrp
1) fastboot flash recovery TWRP-2870_Zenfone5.img
install root
1) root
Instruction
1) Download fix xposed ( link are given above )
copy and paste to sdcard or internal
2) open droidboot to flash ( power+volume up key )
3) Choose recovery ( using twrp )
4)choose the Mount button and put a check in the system "partition" box to mount it.
Use the Advance button to open the File Manager.
5)Navigate to the newly created “FIX XPOSED” folder and choose the app_process file.
Tap and Copy. Navigate to the /system/bin/ folder and paste the app_process file there.
While still in File Manager, navigate back to the “FIX XPOSED” folder, select the libandroid_runtime.so file,
tap Copy. Navigate to the /system/lib/ folder and paste the libandroid_runtime.so file there.
6)Now reboot the device. Install Xposed Installer (SDK 19)
Your Xposed Framework is working again.
I try this and working!!:fingers-crossed::good:
Creakoz / credit to Ohmster for tutorial
wow it worked ..thanks a lot
Thanks
Thanks, procurei na internet por horas e só o seu tutorial deu certo! Funcional.
i didn't get this procedure
i didnt get this procedure can you make a video or screen shots of the actual procedure please!
does this require unlocking the bootloader?
explanation
Could you explain how to do this on a step manner. I read the command and didn't understand it. Or could you give some screenshots also
bootloop after successful flash of xposed
xposed was installed properly but in first reboot it stucked at usb logo. clearing cache didnt work
Harshatxda said:
bootloop after successful flash of xposed
xposed was installed properly but in first reboot it stucked at usb logo. clearing cache didnt work
Click to expand...
Click to collapse
Then uninstall it
tetap tdk bs..mohon video recordernya utk lihat tutornya
link die, please
Finally Builded Dual Boot Patcher For Redmi 4x With All Fixes.
Now DBP is official for Redmi 4x
Note:- Redmi 4x/4(India) both are same.
Note:-I AM NOT RESPONSIBLE IF ANYTHING HAPPENS TO YOUR DEVICE.USE AT YOUR OWN RISK.THIS IS PERSONALLY TESTED BY ME SO IT SHOULD NOT CREATE ANY PROBLEM IF YOU FOLLOW THE STEPS ABOVE PROPERLY
ENJOY
The Requirement:
1- TWRP Latest[Recommended] ==> TWRP For Santoni
2- Decrypted Data ==> (Format Data)(Important Step or Else Rom will not boot and it will wipe internal storage so take a backup)
3- Magisk or Supersu (I used Magisk)
The Installation Steps:
1- Install the latest DBP from here ==> Dual Boot Patcher
(As this build is debug it will create another app name 'Leaks' so dont uninstall it will also uninstall DBP app)
2- Go to Settings ==>Installed apps==>All==>Documents==>Enable
3- Go to app and click on ROMs and grant it a root access.
4- Click yes to update the "Primary Kernel"
5- Go to "Patch Zip File"
6- Click on "Add flashable zip"
7- Choose the required ROM such as "YurekaOS"
8- Click "OPEN"
9- Under partition configuration choose "Data slot/Ext slot/secondary(if have enough space)"
10- Enter and ID as "Yureka or any name you like"
11- Click on "Continue"
12- Click on "SAVE"
13- Click on "Right Mark" to patch the zip file
14- Wait till the operation to finish
15- Go to "ROMs"
16- Click on "Add patched file" to flash it
17- Click on "Keep the current location"
18- Flash and wait till the operation to finish
19- Go to "ROMs" to make sure that the new second ROM is added
20- Now close the app and re-open it for refreshing
21- Adding the "Gapps Package"
22- Go to "Patch Zip File"
23- Click on "Add flashable zip"
24- Choose the required any gapps package
25- Click "OPEN"
26- Check and make sure that the ID in step 10 "Yureka or any name you like" is appeared as "Yureka or any name you like (Data slot)"
27- Repeat the steps from 11 to 18
28- Reboot
29- Install the DBP again
30- Choose the primary ROM and reboot
31- To install boot ui==>Go to settings==>click on install boot ui (it will give you option to boot to which rom on every reboot)(This step is optional)(in order to use 'boot ui' update ramsdisk of both rom)
About Partitons:
data-slot = internal storage (can be used)(recommended)
Extsd-slot = external sd card (can be used)
Primary= System Partition ( No use )
Secondary = System Partition (Only can be used if much of sytem space left)
Multi-slots = cache partition ( No use )
What's Working:
Everything
What are not Working:
Tell me
Special thanks to:
@chenxiaolong for such an beautiful open source project
@dg28gadhavi (For guiding me the basics and helping in every manner he can)
Contributors
Nik001, dg28gadhavi, chenxiaolong
Official XDA Thread: Official Thread
Official Sources Code:https://github.com/chenxiaolong/DualBootPatcher
Sources Code:https://github.com/Nikesh001/DualBootPatcher
Plz give a thumbs up to the thread if you all like it:good:
HAPPY DUALBOOTING:good:
Nik001 said:
Finally Builded Dual Boot Patcher For Redmi 4x With All Fixes.
Note:- Redmi 4x/4(India) both are same.
Note:-I AM NOT RESPONSIBLE IF ANYTHING HAPPENS TO YOUR DEVICE.USE AT YOUR OWN RISK.THIS IS PERSONALLY TESTED BY ME SO IT SHOULD NOT CREATE ANY PROBLEM IF YOU FOLLOW THE STEPS ABOVE PROPERLY
ENJOY
The Requirement:
1- TWRP Latest[Recommended] ==> TWRP For Santoni
2- Decrypted Data ==> (Format Data)(Important Step or Else Rom will not boot and it will wipe internal storage so take a backup)
3- Magisk or Supersu (I used Magisk)
The Installation Steps:
1- Install the latest DBP from here ==> Dual Boot Patcher
(As this build is debug it will create another app name 'Leaks' so dont uninstall it will also uninstall DBP app)
2- Go to Settings ==>Installed apps==>All==>Documents==>Enable
3- Go to app and click on ROMs and grant it a root access.
4- Click yes to update the "Primary Kernel"
5- Go to "Patch Zip File"
6- Click on "Add flashable zip"
7- Choose the required ROM such as "YurekaOS"
8- Click "OPEN"
9- Under partition configuration choose "Data slot/Ext slot/secondary(if have enough space)"
10- Enter and ID as "Yureka or any name you like"
11- Click on "Continue"
12- Click on "SAVE"
13- Click on "Right Mark" to patch the zip file
14- Wait till the operation to finish
15- Go to "ROMs"
16- Click on "Add patched file" to flash it
17- Click on "Keep the current location"
18- Flash and wait till the operation to finish
19- Go to "ROMs" to make sure that the new second ROM is added
20- Now close the app and re-open it for refreshing
21- Adding the "Gapps Package"
22- Go to "Patch Zip File"
23- Click on "Add flashable zip"
24- Choose the required any gapps package
25- Click "OPEN"
26- Check and make sure that the ID in step 10 "Yureka or any name you like" is appeared as "Yureka or any name you like (Data slot)"
27- Repeat the steps from 11 to 18
28- Reboot
29- Install the DBP again
30- Choose the primary ROM and reboot
31- To install boot ui==>Go to settings==>click on install boot ui (it will give you option to boot to which rom on every reboot)(This step is optional)(in order to use 'boot ui' update ramsdisk of both rom)
About Partitons:
data-slot = internal storage (can be used)(recommended)
Extsd-slot = external sd card (can be used)
Primary= System Partition ( No use )
Secondary = System Partition (Only can be used if much of sytem space left)
Multi-slots = cache partition ( No use )
What's Working:
Everything
What are not Working:
Tell me
Special thanks to:
@chenxiaolong for such an beautiful open source project
@dg28gadhavi (For guiding me the basics and helping in every manner he can)
Contributors
Nik001, dg28gadhavi, chenxiaolong
Official XDA Thread: Official Thread
Official Sources Code:https://github.com/chenxiaolong/DualBootPatcher
Sources Code:https://github.com/Nikesh001/DualBootPatcher
Plz give a thumbs up to the thread if you all like it:good:
HAPPY DUALBOOTING:good:
Click to expand...
Click to collapse
Hey please help me i am also trying to port this but I don't have a proper idea how to
Can i have 2 rom with 16gb rom?
Hey, i have try this. Buty device going to bootlop. How dp i fix this?
randifilan said:
Hey, i have try this. Buty device going to bootlop. How dp i fix this?
Click to expand...
Click to collapse
How can you get bootloop?
When i try this. When i switch tto the secondary rom. My phone is bootloop.
Can you provide a video for me on redmi 4x? I have try many time but still bootloop. My phone is vibrate when change the rom. I try this oh R.R 5.8.4.
Install the dualboot patcher utilities, download from official thread. Try it and comment again if it success.
can i use lazy flasher for step 2
Hey Nik
The official build is out ..and I have made an Instructional thread on mi forum .
I want to know ..Why can't I use magisk in second ROM
.Where I am doing wrong .
I have tried to flash it patched ... Failed
Non patched direct through recovery ...failed .
Plz help
Wasef x said:
Hey Nik
The official build is out ..and I have made an Instructional thread on mi forum .
I want to know ..Why can't I use magisk in second ROM
.Where I am doing wrong .
I have tried to flash it patched ... Failed
Non patched direct through recovery ...failed .
Plz help
Click to expand...
Click to collapse
Can you give me the link?
randifilan said:
Can you give me the link?
Click to expand...
Click to collapse
Sure ..
Here it is
http://en.miui.com/thread-825128-1-1.html
Wasef x said:
Sure ..
Here it is
http://en.miui.com/thread-825128-1-1.html
Click to expand...
Click to collapse
I already try from this, but failed, are success do that? I try in from RR, and install AEX, when switch the rom, my phone got vibrate twice and go to twrp, i use dualboot utility and doent work. Are you success?
randifilan said:
I already try from this, but failed, are success do that? I try in from RR, and install AEX, when switch the rom, my phone got vibrate twice and go to twrp, i use dualboot utility and doent work. Are you success?
Click to expand...
Click to collapse
I have it working .
One thing ..
When you switch ROM .
Don't do it directly .
First update the ramdisk of that ROM on which you wanna switch .
Otherwise it doesn't boot
Wasef x said:
I have it working .
One thing ..
When you switch ROM .
Don't do it directly .
First update the ramdisk of that ROM on which you wanna switch .
Otherwise it doesn't boot
Click to expand...
Click to collapse
I have update the ramdisk. But still not work. Also failed.
I can't enable wifi after updating primary rom (Xiaomi. Eu). . Any solution?
How to decrypted data?
strbgs27 said:
How to decrypted data?
Click to expand...
Click to collapse
TWRP...Wipe...Format Data
What means step 29? Install the APP again?
Edit: Omg! Selected Second Rom and now it starts direct in TWRP... And i can't start Primary Rom .....
Really dont try this if u want to save time x)))))))
Not working on redmi 4 indian
Currently I am on redmi 4x global stable miui 9 rom and my device is redmi 4 64gb. Everything goes well. But when I reboot my device it vibrate 5 times and reboot in twrp. I've tried two rom resurrection remix v5.8.5 and viper os, but no any works..