So let me explain what I'm trying to do. I am trying to connect to a Barco Clickshare (CSE-200) via wifi using the clickshare app and then open chrome and go to a website.
The Clickshare for those that don't know is a wireless content sharing device for meeting rooms. It's like a wireless access point but with no internet. You connect to it on your phone by connecting to its wifi SSID and password and then use the clickshare app to share content from your phone to a TV or whatever display the clickshare access point is connected to.
So when I connect to the clickshare wifi (which has no internet) I am no longer able to go to a website or use internet. My phone doesn't seem to be able to use my LTE service while the wifi is on. I talked to a guy at Barco and he said thats not normal. My LTE service should still be usable. My coworker who has the iPhone 6 is able to connect to the clickshare wifi and still use the internet on his phone from his LTE service.
I should note I am using the MSL/dun trick for hotspot.
Any ideas? Thanks!
Enable developer mode by tapping the build number in the about menu a bunch of times, then go to the new developer options menu at the bottom of the settings screen and turn on the keep mobile data turned on setting.
It's still possible that in the routing table on the phone the cellular data will be associated with a higher cost, and therefore the data still won't go over it even though it's enabled, bit worth a try.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G935P using Tapatalk
I did what you said pitcherj, but no luck. I do now have the LTE icon at the top above the cell bars which before I didn't, but still no internet. Anything else I could try? I did restart the phone as well.
Nope, no thoughts. Without root you can't recost the network interfaces AFAIK. Maybe someone else has an idea.
Sent from my SM-G935P using Tapatalk
Related
so I have a rooted vibrant and ever since I started using SwitchPro, I've had connectivity issues with my data.
At first, I didn't even use the data toggle on the widget and I was still getting 3G dropped. I tried to add the button to my widget to control it that way and it worked fine. 15 minutes later though, the icon is no longer highlighted as shown in the pic below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
so what I have to do now just to get data to work is to toggle it on and off just to get it to reappear.
in the SwitchPro options there's a box to check for "Data connection" It says "Use APN toggle - if the data connection toggle doesn't work, you can try this"
^ I've tried checking this box but my data connection still doesn't work
- I've tried uninstalling it and everything goes back to normal.
- I'd like to get this working though since the app is pretty useful.
just curious to see if any other vibrant users are having this issue and have found a fix for it. I've read on the forum that some SwitchPro users have experienced this as well
see?! data connection on.. no data on top bar
SwitchPro displayed my connection properly but would not function when I tried to use it to toggle my data connection. If I used the widget to turn off the data connection, I could not get it back again unless I rebooted. I also tried the APN setting, and it didn't help me either.
Maybe e-mail the dev?
I have been using Switch Pro for 2 weeks and this has not happened to me. Maybe it's because I do not and have not used the "Data Switch".
yeah Keslynn, i'll probably try emailing them about it.
jrwin, I've tried uninstalling and using my phone w/o switchpro for a while but as soon as I reinstall the widget I have issues again.
I would definitely like to use the app w/o having the data connection icon there but we'll see what happens
Dear All,
Requirement:
Network Provider broadcasts discount plans and area name on channel 50 of Cell Broadcast Service which is also known as Cell Info Display in Nokia phones. Android didn't had this option in CM9 / ICS, but some GB ROMs did had Cell Broadcast option in SMS Message Settings. However, in Jelly Bean, Cell Broadcast is included and can be accessed from System Settings -> Wireless and Networks menu. Thus, I'm trying to find library to integrate this feature in Epinter's CM10 ROM. (only if Epinder doesn't have any problems with it)
Already have:
Cell Broadcast Receiver apk
http://d-h.st/vFB
This application is accessed via Settings Menu.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Posted on Nexus S General Discussion http://forum.xda-developers.com/showthread.php?p=32093499
What's required:
Installing above apk didn't bring up the Cell Broadcast option in wireless and networks menu as its libs are not included in the build. Having the libs that would allow me to access this feature can help. Or if I can access the application and configure it via Terminal would be good enough.
Also, I'm not sure whether I can enable channel 50 using above application. Some input can always help.
Thanks developers and fellow members for your efforts!!
Update:
[ROM][JB][4.1.2]AOKP for Atrix 10/17/2012
http://forum.xda-developers.com/showthread.php?t=1755836
Above mentioned ROM contains CellBroadcastReceiver.apk in /system/app folder, still Cell Broadcast setting is not available in any settings menu.
Fellow member said this option was on fryo, can anyone confirm?
Link: http://forum.xda-developers.com/showthread.php?t=1594374
The only network in the UK that supports Cell Broadcast is Vodafone, and they only display the current cell identity...
I'm assuming it's more popular elsewhere
Yeah, in some places they show discount on call which comes really handy
I tried signed_froyo_atrix_kyler084.zip http://www.mediafire.com/?aqzowdn8w5z2osu and CellBroadcast works like a charm. I can see the message in the notification bar. Now have to figure out how can I have this in CM10 or ICS.
So, I'm one of the many who have a limited data plan so uploading my backups and stuff to the cloud has never been an option as data adds up quick.
I've see a lot of people not able to get WiFi direct to work so today I decided to give it a try. Its not as cut and dry as a S3 to S3 WiFi direct, but using WiFi direct with a little help with ES file Explorer is completely possible.
Remember, this is using WiFi direct, there is no routers or other devices other than my N7 and S3.
In this example, I'm going to transfer a 158 MB file.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So, the first thing I did was open up the WiFi settings on both devices and went to WiFi Direct. I also renamed both devices to better ID them.
Once renamed, you can select from either device to connect. I just selected my S3 from the N7 device. The S3 in prompts for conformation.
The devices will display connected.
Now that you are connected, you are going to go to the device that you want to SEND FROM and open up ES file explorer. Go right to the menu and scroll down to remote settings.
Check "remote manage" and copy down that ftp address in full. If you close ES and have the close on exit check, you will lose the connection so do as you please with that settings. You can also set a password if you plan on doing this on the LAN level too.
Now, go to the receiving device. I had issues with chrome, but Firefox works fine. Plug in that ftp: //xxx.xxx.xx.xx:xxxx/ and hit go
Now you should get your sending devices directory. Have fun, transfer away.
ES explorer has settings to allow allow access to root if you are rooted so if you are enabled, be careful. Im not responsible for you messing with wrong files and crap.
Here is my transfer, notice the time from finish to complete. It took about 30 seconds.
This can be done from either device depending on what direction a file needs to go. You can save your FTP settings and bookmark too for easy access in the future.
You can use FTP on you WiFi at home. Passwords are recommended as your device will be available on the home network.
This is the only easy way I was able to get WiFi direct to work. Enjoy.
ok guys im allocating some nfc tags around the public bar i work at,.
i want to put 2 tags on the main bar that connect customers to our wifi, now i know i can do that with commands however
we are using a broadband system provided by heineken beer company, users connect the wifi network, but then must open theyre browser and click a default webpage that comes up instantly to connect to the network.
so how would i set the tags to
connect to the wifi and then click the "connect to heineken wifi" option on the default page?
Are you sure about NFC with its max range of about 20cm? Either way I would imagine that the WiFi hardware supplied takes care of redirecting the user at login
peterk-1 said:
Are you sure about NFC with its max range of about 20cm? Either way I would imagine that the WiFi hardware supplied takes care of redirecting the user at login
Click to expand...
Click to collapse
yes that is the idea, customer walks in touches the bar designated spot and connects to wifi,... we dont want a long distance force connect to every customer lol
the supplied wifi asks for the user to open webbrowser and click "use wifi" before actualy being connected. is there such command to get around this?
im on a secret mission to make our bar android friendly :highfive:
Could this the case?
To restrict wifi access to current customers and to make the connection easier (selecting correct wifi service and keying a strong passphrase) the customer touches the tablet onto the bar mounted NFC device and the network wifi config is beamed to the tablet and the customer elects to process the download and get immediate network access.
This link http://mobiletechglobal.com/customer-cases/i-heiwi/ shows a jpeg of the "Heineken Hub"
peterk-1 said:
Could this the case?
To restrict wifi access to current customers and to make the connection easier (selecting correct wifi service and keying a strong passphrase) the customer touches the tablet onto the bar mounted NFC device and the network wifi config is beamed to the tablet and the customer elects to process the download and get immediate network access.
This link http://mobiletechglobal.com/customer-cases/i-heiwi/ shows a jpeg of the "Heineken Hub"
Click to expand...
Click to collapse
ah that the heineken hub alright, but our is a little different,
we have this as default loaded page
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But it has a button in the middle of the page saying "free premium wifi" the user must click this button before actually being connected to the net,.
Make sure you have HD Voice provisioned on your account https://wbillpay.verizonwireless.com/vzw/accountholder/services/displayProductsServices.action click on Manage Your Products, add HD Voice, should provision in ~15min
If you're not seeing Enhanced LTE, dial *#*#4636#*#*, phone information, scroll to turn on VoLTE flag, restart device or put into Airplane Mode
Now go to Settings ---> More ---> Cellular Networks and Enhanced LTE should now be enabled
WinDroidGuy said:
Make sure you have HD Voice provisioned on your account https://wbillpay.verizonwireless.com/vzw/accountholder/services/displayProductsServices.action click on Manage Your Products, add HD Voice, should provision in ~15min
If you're not seeing Enhanced LTE, dial *#*#4636#*#*, phone information, scroll to turn on VoLTE flag, restart device or put into Airplane Mode
Now go to Settings ---> More ---> Cellular Networks and Enhanced LTE should now be enabled
Click to expand...
Click to collapse
Not working for me.....button in *#*#4636#*#* never changes to anything and I never have option in more settings
I think the key to getting this to work is to be on a 5.1 ROM.... I tried with 5.01 and the new baseband, but I think the settings are in the ROM.
Correct, you need to be on 5.1 for VoLTE
dissapears
i can get it on my phone but as soon as i go to use it i lose lte and then my advance option disappears. could it be possible my sim card doesn't support volte? I had to use a sim from an iphone 5 to get service. I think that sim is different from one that's in a M8 or moto x. Any input would be appreciated.
Edit- got it working by going on Verizon and removing hd voice and the adding it back. SIM card is fine..
Thanks Worked Like a charm. Finally the one major thing I wanted on the N6
Worked for me, but took about 5 - 10 minutes to provision. Thanks!
Worked for me, purchased directly from moto
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Appears to be working for me too.
Now to update the wife's phone and get it going there.