Related
Anyone in the UK got there OTA or Kies Lollipop update yet?
If you have flashed the German DBT & the CSC has changed will it change back to the UK CSC if flashed later with a UK Firmware?
If you have flashed how is it running?
Ta
@home said:
Anyone in the UK got there OTA or Kies Lollipop update yet?
If you have flashed the German DBT & the CSC has changed will it change back to the UK CSC if flashed later with a UK Firmware?
If you have flashed how is it running?
Ta
Click to expand...
Click to collapse
Got a UK version on EE and flashed German rom with odin. Working well and nice and snappy. Had to re root it though and re install CM recovery.
I have a SIM free note 4 bought from Samsung estore, nothing on mine yet.
@home said:
Anyone in the UK got there OTA or Kies Lollipop update yet?
If you have flashed the German DBT & the CSC has changed will it change back to the UK CSC if flashed later with a UK Firmware?
If you have flashed how is it running?
Ta
Click to expand...
Click to collapse
No update for me yet, however I think that Samsung will provide the network provider with the build then the network provider will add there bloatware and so on. I'm not 100% sure on this though.
Based on the CSC changing to a German CSC when I flashed the German DBT I'd have a guess and say flashing a UK ROM via Odin it would again change the CSC. Just a guess..
I have installed the German DBT and so far so good..
markgilmour99 said:
Got a UK version on EE and flashed German rom with odin. Working well and nice and snappy. Had to re root it though and re install CM recovery.
Click to expand...
Click to collapse
Hi mark, just wondering but I have a n910f UK version and I flashed the German lollipop build through Odin yesterday, although after giving it some time to boot it upgraded all of the pre-installed apps, the phone booted but all that showed up was a black screen and an empty notification bar, and kept rebooting over and over. anyone know what the problem could be?
xjw1 said:
Hi mark, just wondering but I have a n910f UK version and I flashed the German lollipop build through Odin yesterday, although after giving it some time to boot it upgraded all of the pre-installed apps, the phone booted but all that showed up was a black screen and an empty notification bar, and kept rebooting over and over. anyone know what the problem could be?
Click to expand...
Click to collapse
Hi xjw1,
Not really knowledgeable enough to help much here. You don't say what you flashed the rom over. I flashed over bobcat rom and had already updated the bootloader too. I also did a full wipe in recovery before using odin. If you ask here you should get a response from an expert. Good luck. http://forum.xda-developers.com/note-4/general/910f-official-lolipop-germany-dbt-t3029508
markgilmour99 said:
Hi xjw1,
Not really knowledgeable enough to help much here. You don't say what you flashed the rom over. I flashed over bobcat rom and had already updated the bootloader too. I also did a full wipe in recovery before using odin. If you ask here you should get a response from an expert. Good luck. http://forum.xda-developers.com/note-4/general/910f-official-lolipop-germany-dbt-t3029508
Click to expand...
Click to collapse
I flashed the official stock Lollipop firmware straight from SamMobile, I forget what the baseband was as SamMobile is down at the moment, but thank you for your reply, I'm going to check out the link you provided now.
Sent from my SM-N910F using XDA Free mobile app
@home said:
Anyone in the UK got there OTA or Kies Lollipop update yet?
If you have flashed the German DBT & the CSC has changed will it change back to the UK CSC if flashed later with a UK Firmware?
If you have flashed how is it running?
Ta
Click to expand...
Click to collapse
Got Kies Lollipop on Friday on my EE.
All running fine
SM-N910K not rooted although I would like to get rid of the remnants of Korean
mklass said:
No update for me yet, however I think that Samsung will provide the network provider with the build then the network provider will add there bloatware and so on. I'm not 100% sure on this though.
Based on the CSC changing to a German CSC when I flashed the German DBT I'd have a guess and say flashing a UK ROM via Odin it would again change the CSC. Just a guess..
I have installed the German DBT and so far so good..
Click to expand...
Click to collapse
Yup you use the German update you get the German CSC, flash to a UK one you'll get a UK CSC. But there is almost no difference.You'd be better off sticking to this German one. Whenever an update is pushed you will get it first. If you flash a UK ROM you'll be back in the same situation you're in now waiting for an upgrade. Sometimes the UK providers are weeks/months behind the German updates.
If you want any new OTA updates as soon as Europe gets them stick with this ROM. That is unless you want the UK bloatware. I'm quite surprised the only German stuff is deletable. I bet the EE/Vodafone stuff won't be.
Edit: Actually I take that back, I just checked my CSC and my phone is showing as Polish OXA strangely enough. Well I'm pretty sure I'll still get the OTAs first. What I said should still count for German/Polish updates as they get them first so ..........(fingers crossed).
Flashed German update still retained my UK CSC
Like Mcshave said am better off with German update than EE bloatwares.
Sent from the future using my SM-N910F Note 7
Did you guys do a factory reset after flashing or just carried on with out the reset?
@home said:
Did you guys do a factory reset after flashing or just carried on with out the reset?
Click to expand...
Click to collapse
Hi Mate,
Flashed over my 4.4.4 no reset before or after and all data is still intact
McShave said:
Yup you use the German update you get the German CSC, flash to a UK one you'll get a UK CSC. But there is almost no difference.You'd be better off sticking to this German one. Whenever an update is pushed you will get it first. If you flash a UK ROM you'll be back in the same situation you're in now waiting for an upgrade. Sometimes the UK providers are weeks/months behind the German updates.
If you want any new OTA updates as soon as Europe gets them stick with this ROM. That is unless you want the UK bloatware. I'm quite surprised the only German stuff is deletable. I bet the EE/Vodafone stuff won't be.
Edit: Actually I take that back, I just checked my CSC and my phone is showing as Polish OXA strangely enough. Well I'm pretty sure I'll still get the OTAs first. What I said should still count for German/Polish updates as they get them first so ..........(fingers crossed).
Click to expand...
Click to collapse
But what does it mean if you are with German csc? Idk what csc means but does it add something that you use a German rom in another country? Still have not flashed it yet
I'm from Holland btw
Sent from my SM-N910F using XDA Free mobile app
Well I've got the German Rom on now, so far all seems well. I haven't done a reset just a dirty flash.
So all you guys who have done the same to your UK N4, will you flash the BTU when it's released or stay on the German Rom?
This is a list of ODIN flashable stock ROMs. Uploading them to AFH and posting them here for faster download.
If you want your device on here, please give me the model number (SM-Txxx) and CSC you need. Thread will be updated when I have time.
ODIN - Used for flashing ODIN tar.md5 files to your device.
Odin3_v3.10.7.zip
Stock ROMs - These are UNmodified tar.md5 ROMs from Samsung.
SM-T710
5.0.2_T710XXU1AOG5_T710XAR1AOG6_XAR.zip
5.1.1_T710XXU1BOH7_T710XAR1BOH7_XAR.zip
SM-T810
5.0.2_T810XXU1AOG6_T810XAR1AOG6_XAR.zip
5.1.1_T810XXU1BOH7_T810XAR1BOH7_XAR.zip
SM-T815
T815XXU1AOGB_T815VFG1AOG3_VOD.zip
Please focus on T815 as well. Many of us would very appreciate.
Sent from my LG-H815 using Tapatalk
Kickoff said:
Please focus on T815 as well. Many of us would very appreciate.
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
I will download what's out and start posting them :good:
When you download the file is a ZIP. I think I must decompress it in order to get the tar.md5 , right?
Which option must I select in Odin? AP with only REboot and Factory reset?
thanks!
Fis2 said:
When you download the file is a ZIP. I think I must decompress it in order to get the tar.md5 , right?
Which option must I select in Odin? AP with only REboot and Factory reset?
thanks!
Click to expand...
Click to collapse
Correct. Make sure you DO NOT check re-partition.
Bigbot, here's the latest AOI5 firmware for T815 from region DBT (Germany) mirrored to my Dropbox https://www.dropbox.com/s/felibhquhf8upzw/T815XXU1AOI5_T815OXA1AOI5_DBT.zip?dl=0
Feel free to mirror it to AndroidFileHost as I had issues uploading (upload speeds were slow for me) Thanks!
Sent from my SM-T800 using Tapatalk
DUHAsianSKILLZ said:
Bigbot, here's the latest AOI5 firmware for T815 from region DBT (Germany) mirrored to my Dropbox https://www.dropbox.com/s/felibhquhf8upzw/T815XXU1AOI5_T815OXA1AOI5_DBT.zip?dl=0
Feel free to mirror it to AndroidFileHost as I had issues uploading (upload speeds were slow for me) Thanks!
Sent from my SM-T800 using Tapatalk
Click to expand...
Click to collapse
I'll download it later today and update when it's done :good: thanks
Reflashing
Hi,
I will reflash factory Firmware, i have rottet and have custom recovery. I already have download Firmware and odin can somebody explain me please hove to do it i will be greatfull thanks everybody :good:
I understand that these are stock roms, curious if non-stock roms like CM12 and similar will ever make their way over? My OR rom is awesome, I'm just one of those fools that's constantly customizing for the fun of it.
keyapira said:
Hi,
I will reflash factory Firmware, i have rottet and have custom recovery. I already have download Firmware and odin can somebody explain me please hove to do it i will be greatfull thanks everybody :good:
Click to expand...
Click to collapse
Google is your friend...
http://forums.androidcentral.com/am...w-flash-stock-rom-via-odin-new-interface.html
http://www.droidviews.com/install-stock-firmware-on-samsung-galaxy-devices-using-odin/
Flash at your own risk.
Hello
Rooting my device voids the warranty, but if I have any problems with my device and need support ... Can I flash the stock ROM and take it to customer support?
Without them finding out?
Sent from my SM-T710 using Tapatalk
mrch0x said:
Hello
Rooting my device voids the warranty, but if I have any problems with my device and need support ... Can I flash the stock ROM and take it to customer support?
Without them finding out?
Sent from my SM-T710 using Tapatalk
Click to expand...
Click to collapse
No. You can reinstall stock ROM and have the tablet working as before, but after installing anything custom the efuse will be blown. This means that it can always be detected that custom firmware/kernels/recovery/root/etc have at one point been installed. It also means security containers like Knox will refuse to operate.
I tried out the October (J) release for T815 which has been released for DBT (Germany) and a few other places. (link here). PDA version: T815XXU2AOJ4. Included CSCs: BTU (UK), DBT (Germany), ITV (Italy), XEF (France), XEO (Poland). Android 5.0.2. Previously I had the latest release for PHN (Netherlands), which is still T815XXU1AOG9.
Stagefright bug fixed according to Lookout. Not fixed according to Trustable.
New app icons
Still no multi-user
For DBT, there are four German bloatware apps included. All four can be uninstalled without root.
No Camera2 API
Dialer doesn't accept the secret codes like *#06#, *#0*#, *#1234#
Weird display behaviour (flashing, freezing) at very low battery percentages
Warning: you can not fully downgrade from this version "2" firmware to the version "1" firmwares we had until now! You can partially downgrade if you leave the bootloader and the modem as is (so downgrade only PDA and CSC).
This is great. Any chance that someone has the Stock ROM for the SM-T817V? Or does the firmware for the T815 work on this device?
The October T815XXU2AOJ4 version is now also out for T815 in the Netherlands (PHN), which is bloatfree. No other CSCs included. Link here. The dialer accepts the secret codes like "*#1234#" again. Otherwise the experience is the same. Again, you can't downgrade from this version.
Can the 5.1.1 update be flashed on any SM-T810?
I purchased one in Australia and when I tried to follow the instructions and flash with ODIN I get an error SW REV CHECK FAIL DEVICE when using 5.1.1_T810XXU1BOH7_T810XAR1BOH7_XAR.zip
I had and un-rooted device, which just received an update (11/03) to version LMY47X.T710XXU2BOJ1. I ended up rooting and flashing TWRP on it, but I'm having an issue writing to my external SD card. Is there something I can flash to fix this?
Thanks
edit: Google was my friend - manually updated platform.xml.
dnydny said:
Can the 5.1.1 update be flashed on any SM-T810?
I purchased one in Australia and when I tried to follow the instructions and flash with ODIN I get an error SW REV CHECK FAIL DEVICE when using 5.1.1_T810XXU1BOH7_T810XAR1BOH7_XAR.zip
Click to expand...
Click to collapse
The T810XXU1BOH7 firmware is very old (H = August I think). Apparently for your device it constitutes a downgrade, which it doesn't allow. Download the most recent firmware to flash. If e.g. you currently have firmware with a "2A" (5.0.2) on your device, you can't flash this "1B" (5.1.1) firmware even though it seems like an upgrade of android, because it is a downgrade of the bootloader. Download firmware with "2B" (5.1.1) in the name and I think it may work.
I don't have the T810, but T815 which is still stuck at 5.0.2...
Is it possible to flash a T710 firmware onto a T715 device? I don't need LTE at all so I don't mind losing it (I have no SIM). I just want to get faster updates because I need multi-user support from 5.1.1.
GidiK said:
The T810XXU1BOH7 firmware is very old (H = August I think). Apparently for your device it constitutes a downgrade, which it doesn't allow. Download the most recent firmware to flash. If e.g. you currently have firmware with a "2A" (5.0.2) on your device, you can't flash this "1B" (5.1.1) firmware even though it seems like an upgrade of android, because it is a downgrade of the bootloader. Download firmware with "2B" (5.1.1) in the name and I think it may work.
I don't have the T810, but T815 which is still stuck at 5.0.2...
Click to expand...
Click to collapse
Thanks! Thats really handy to know. I'll give XAC-T810XXU2BOJ1 a shot and see how that goes.
So last night I flashed stock firmware from sammobile,after that I flashed the appropriate modem for the wifi to work.Everything is good but I tried from curiousness the Update Software button.It says my software is modified and I can't update it.Why?! I just flashed the stock firmware without rooting it or anything.What can I do?
calinoii said:
So last night I flashed stock firmware from sammobile,after that I flashed the appropriate modem for the wifi to work.Everything is good but I tried from curiousness the Update Software button.It says my software is modified and I can't update it.Why?! I just flashed the stock firmware without rooting it or anything.What can I do?
Click to expand...
Click to collapse
Reflash everything with a full (not modified) stock firmware. That's because you flashed file that not corresponding the stock firmware you installed, so the OTA update will break.
Sent from my ASUS_Z00AD
krasCGQ said:
Reflash everything with a full (not modified) stock firmware. That's because you flashed file that not corresponding the stock firmware you installed, so the OTA update will break.
Sent from my ASUS_Z00AD
Click to expand...
Click to collapse
I flashed a stock frimware! First I wiped everything from my phone except storage and flashed the stock firmware from sammobile.It is completely stock right now...
In order for OTA updates to function, the parts of the firmware must match each other, and the firmware must have the same CSC as originally installed on the device. For example, my S4 originally was from O2 (CSC O2U), but when I got it off Swappa it had the CSC of SIM installed. I would need to install the O2-branded firmware back on to the device in order for OTA updates to function.
If you do not know what the original CSC was, either because the phone was a "hand-me-down" or was purchased used, then OTA updates will not function and you will need to use Odin to update.
calinoii said:
So last night I flashed stock firmware from sammobile,after that I flashed the appropriate modem for the wifi to work.Everything is good but I tried from curiousness the Update Software button.It says my software is modified and I can't update it.Why?! I just flashed the stock firmware without rooting it or anything.What can I do?
Click to expand...
Click to collapse
Can u share the release date of the stock firmware u downloaded?? Coz last stock firmware was released on 17.4.15 for 5.0.1 for i9500..
Ankit0141 said:
Can u share the release date of the stock firmware u downloaded?? Coz last stock firmware was released on 17.4.15 for 5.0.1 for i9500..
Click to expand...
Click to collapse
It doesn't matter. Because we look on firmware version, not release date.
Sent from my GT-I9500 using XDA One
Strephon Alkhalikoi said:
In order for OTA updates to function, the parts of the firmware must match each other, and the firmware must have the same CSC as originally installed on the device. For example, my S4 originally was from O2 (CSC O2U), but when I got it off Swappa it had the CSC of SIM installed. I would need to install the O2-branded firmware back on to the device in order for OTA updates to function.
If you do not know what the original CSC was, either because the phone was a "hand-me-down" or was purchased used, then OTA updates will not function and you will need to use Odin to update.
Click to expand...
Click to collapse
So ,can I change my CSC ? Or is there any way to find out what was the original one? Any other things that need to match in order to update via OTA? Or you kinda say it's impossible to do that if I already modified the original software.Btw I have a i9505
krasCGQ said:
It doesn't matter. Because we look on firmware version, not release date.
Sent from my GT-I9500 using XDA One
Click to expand...
Click to collapse
So can I achieve what I want? Or it's kinda impossible now that I modified the software before?
calinoii said:
So can I achieve what I want? Or it's kinda impossible now that I modified the software before?
Click to expand...
Click to collapse
To identify what's the latest firmware for your region, use your hometown's CSC code (region code) and look for a new version available.
Like I9500UBUHOI1 for region ARO, I9500XXUHOH7 for region SER, and many more. If you're unsure, check your CSC code by entering Recovery mode or use an app like Phone Info.
@calinoii: Many S4 boxes will have the CSC on them as part of the Samsung merchandising code, though mine did not. If the box does not have it, or you don't have the box, the only way to get the correct CSC is by parsing the IMEI and finding out which carrier purchased that device. imeidata.net used to have that option available, and it was how I found out that my device was originally from O2. They took it out, and I'm not aware of any replacements. Try contacting your carrier, as they may be able to provide that information.
krasCGQ said:
To identify what's the latest firmware for your region, use your hometown's CSC code (region code) and look for a new version available.
Like I9500UBUHOI1 for region ARO, I9500XXUHOH7 for region SER, and many more. If you're unsure, check your CSC code by entering Recovery mode or use an app like Phone Info.
Click to expand...
Click to collapse
so I checked on sammobile and the csc for my firmware (I9505XXUHOJ2) is I9505XXHOJ1. Maybe it has been installed with the firmware?
Strephon Alkhalikoi said:
@calinoii: Many S4 boxes will have the CSC on them as part of the Samsung merchandising code, though mine did not. If the box does not have it, or you don't have the box, the only way to get the correct CSC is by parsing the IMEI and finding out which carrier purchased that device. imeidata.net used to have that option available, and it was how I found out that my device was originally from O2. They took it out, and I'm not aware of any replacements. Try contacting your carrier, as they may be able to provide that information.
Click to expand...
Click to collapse
so I checked on sammobile and the csc for my firmware (I9505XXUHOJ2) is I9505XXHOJ1. Maybe it has been installed with the firmware?
I guess I wasn't clear. When I say "CSC of the phone", I'm referring to the three digit carrier code some of the devices have. For example, my phone I discovered had the model number of GT-I9505ZKAO2U. The carrier code of my phone is the last three digits of the model number. It therefore is O2U, and on sammobile.com I would narrow down my search for ROMs using that code to get the correct ROM for the device.
The firmware has its own CSC code, but that cannot be used to determine the phone's CSC. You either need the model number of the phone as printed on the box, or you need to find someone who can research the IMEI and tell you what carrier the phone was originally sold to.
calinoii said:
so I checked on sammobile and the csc for my firmware (I9505XXUHOJ2) is I9505XXHOJ1. Maybe it has been installed with the firmware?
Click to expand...
Click to collapse
No, that's probably modem or baseband version. Like Strephon said before, it refers on latest 3 digits on your phone box. Like my Galaxy S4 is GT-I9500ZWAXSE, so this phone is for Indonesian markets. Third party app might refer it into installed CSC codes like I install Latin American firmware into my phone and it's changed into GT-I9500ZWATTT. It mostly refers to region like region CHN for China, ARO for Argentina, etc.
CSC that always mentioned on the firmware details is actually multi-CSC. Like on SEA I9500XXUHOH7, it's multi-CSC version is I9500OLBHOH1 and Latin American I9500UBUHOI1 is I9500UUBHOE2. Multi-CSC applies one of CSC codes that matches your phone (like I download ARO firmware but after installing and wipe cache, CSC code installed is TTT instead of ARO).
Sent from my GT-I9500 using XDA One
Stock Oreo N950USQU3CRC2 Odin files for AT&T NOTE 8
Model: SM-N950U
Model Name: Galaxy Note 8
Country: USA
Version: Android Oreo 8.0
Security Patch Level: March 1st, 2018
Product Code: ATT
PDA: N950USQU3CRC2
CSC: N950UOYN3CRC2
Download here: N950USQU3CRC2
DOWNLOAD for ODIN:
ODIN v3.13.1
Does this work for Unlocked?
DELETED
Pardon my ignorance. I'm about to buy a AT&T Note 8 today, but AT&T isn't my carrier (as I'm in Jamaica).
Is this the latest firmware for this device? My OCD requires me to have the latest OTA available so I don't have to keep wiping my device each time I sideload it.
Anonymously_Unknown said:
Pardon my ignorance. I'm about to buy a AT&T Note 8 today, but AT&T isn't my carrier (as I'm in Jamaica).
Is this the latest firmware for this device? My OCD requires me to have the latest OTA available so I don't have to keep wiping my device each time I sideload it.
Click to expand...
Click to collapse
The latest is N950USQS4CRE1.
Can I use this to go from CQLB to CRC2?
@bboii86
jellybear456 said:
Can I use this to go from CQLB to CRC2?
@bboii86
Click to expand...
Click to collapse
Yes you can. There's a newer firmware. The latest is CRE1. I have them, if needed.
bboii86 said:
Yes you can. There's a newer firmware. The latest is CRE1. I have them, if needed.
Click to expand...
Click to collapse
Is CRE1 an official build? Will I be able to receive future OTAs on that version?
jellybear456 said:
Is CRE1 an official build? Will I be able to receive future OTAs on that version?
Click to expand...
Click to collapse
Yes, CRE1 is the official build. Yes, you will receive OTA updates. Here's the link to the Odin files of CRE1
https://androidfilehost.com/?fid=890278863836287962
Can you still flash the unlocked firmware on the att note 8 after the oreo update?
I switched carriers and even though they told me the phone was compatible I cannot get it to work.
luke24 said:
Can you still flash the unlocked firmware on the att note 8 after the oreo update?
I switched carriers and even though they told me the phone was compatible I cannot get it to work.
Click to expand...
Click to collapse
Yes, you can still flash the unlocked firmware on AT&T note 8 after the Oreo update. Only the U1 unlocked firmware can be flashed and as long it's still on the same bootloader version. Also, you'll need a different version of Odin to flash for the Oreo update.
Use this version of Odin.
DOWNLOAD for ODIN:
ODIN v3.13.1
bboii86 said:
Yes, you can still flash the unlocked firmware on AT&T note 8 after the Oreo update. Only the U1 unlocked firmware can be flashed and as long it's still on the same bootloader version. Also, you'll need a different version of Odin to flash for the Oreo update.
Use this version of Odin.
DOWNLOAD for ODIN:
ODIN v3.13.1
Click to expand...
Click to collapse
I'm on at&t crk1. I need to flash unlocked. Can you please link me to the correct firmware?
10pmStalker said:
I'm on at&t crk1. I need to flash unlocked. Can you please link me to the correct firmware?
Click to expand...
Click to collapse
You can go HERE to get that information, Post #3
Which version can I download for SM-N950U which is from the United Arab Emirates
I just downloaded the files, I have no idea what I'm doing or how to open them and install them? Can anyone please help me? The Samsung files app says it cannot open the downloaded files And I'm not saying instructions anywhere
Literally no matter what I do. I cannot flash ANYTHING in Odin to either revert back to 7.0 or stock 8.0. Its not flashing any version of 7 or 8 and its not flashing any U firmware or AT&T firmware.
What am I doing wrong. I flashed 8.0 with the intent to be able to revert back to stock 7.0 once official Oreo rolled out and I literally cant do anything in Odin. I've tried odin 3.13 and 3.12 prince version. HALP
update: flashed G930UUEU4BRD1 using odin 3.12 successfully. phew
As far as I know, the newest Oreo version of AT&T is CRE4, not BRD6 as you say
SKv.DinDin said:
As far as I know, the newest Oreo version of AT&T is CRE4, not BRD6 as you say
Click to expand...
Click to collapse
You may be speaking about where I said CRD6, that is a version of Oreo that doesn't have much difference than the latest version of Oreo CRE4. Most of them after release have been minor changes. I was not flashing back to BRA1 to constantly flash the newest update of Oreo. I have an unlocked s7 so I can flash any carrier but eventually when the official oreo firmware comes out for either tmobile or the unlocked 930 varient i will be switching back to OTA updates
aarongotgame said:
You may be speaking about where I said CRD6, that is a version of Oreo that doesn't have much difference than the latest version of Oreo CRE4. Most of them after release have been minor changes. I was not flashing back to BRA1 to constantly flash the newest update of Oreo. I have an unlocked s7 so I can flash any carrier but eventually when the official oreo firmware comes out for either tmobile or the unlocked 930 varient i will be switching back to OTA updates
Click to expand...
Click to collapse
You tried with patched odin? Odin v3.13.1 3B.
anarasgarli said:
You tried with patched odin? Odin v3.13.1 3B.
Click to expand...
Click to collapse
The issue was probably that I needed to put home file in csc and exclude the csc file and then factory reset and clear caches. I probably ended up factory reset before Odin and didn't activate USB debug or the files I was using were corrupt. Since then I've just flashed TMobile Oreo that came out a few days ago and I'm gonna just use official ota for future updates
aarongotgame said:
The issue was probably that I needed to put home file in csc and exclude the csc file and then factory reset and clear caches. I probably ended up factory reset before Odin and didn't activate USB debug or the files I was using were corrupt. Since then I've just flashed TMobile Oreo that came out a few days ago and I'm gonna just use official ota for future updates
Click to expand...
Click to collapse
Looks like same problem with Galaxy S8, just search Stuck 32% error at Galaxy s8.
Reverting back from Oreo to either Nougat or Marshmallow
I am a newbie here.. Recently my ATT Galaxy S7 received Oreo upgrade and I am not at all liking it.
Can someone please guide me if it's possible to go back to Nougat or even marshmallow (preferable). If yes, what would steps for same..
My device is SM-G930A. Originally ATT device and now it's unlocked by ATT.
My device is currently NOT rooted , I am OK with rooting it.. I would appreciate if someone can help me with steps for same as well..
Thanks in advance..