Related
After trying to upgrade my ROM, I'm stuck at the ACER logo screen. I've tried about every ROM listed the the developer forum and none of them work. So now I'm trying to use the "afterota" tool.
I hold the reset button and power on and the tablet goes into "APX" mode and the Win7 machine sees it. But the Win7 machine can't find an APX driver for it. I've tried the USB driver from the ACER site but apparently that is for the ADB mode. When I run "afterota" there is an option to "Install Driver" but that doesn't work either.
I've searched google till I'm ready to pull out my hair and can't find a solution. Anyone know how solve this?
lewmur said:
After trying to upgrade my ROM, I'm stuck at the ACER logo screen. I've tried about every ROM listed the the developer forum and none of them work. So now I'm trying to use the "afterota" tool.
I hold the reset button and power on and the tablet goes into "APX" mode and the Win7 machine sees it. But the Win7 machine can't find an APX driver for it. I've tried the USB driver from the ACER site but apparently that is for the ADB mode.
Click to expand...
Click to collapse
2 sets of drivers. Acers and adb/fastboot drivers.
When I run "afterota" there is an option to "Install Driver" but that doesn't work either.
Click to expand...
Click to collapse
R u running ICS stock ota rom. Afterota will only work with that firmware.
I've searched google till I'm ready to pull out my hair and can't find a solution. Anyone know how solve this?
Click to expand...
Click to collapse
You must use nvflash based tool to get fixed ....an EUU or v8 bootloader flash will do
See links to guides and drivers in my sig
Sent from my GT-I9300 using Tapatalk 4 Beta
dibb_nz said:
2 sets of drivers. Acers and adb/fastboot drivers.
R u running ICS stock ota rom. Afterota will only work with that firmware.
You must use nvflash based tool to get fixed ....an EUU or v8 bootloader flash will do
See links to guides and drivers in my sig
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I made some progress. I got the V7-UNL-ICS-HC-bootloader-MULTI-cwm.zip, which had the driver and I now have "Nvidia USB Boot-recovery driver for Mobile devices" installed. It also has nvflash and several other apps. I read the link you have for getting the CPUID, but have to admit that it just throughly confused me. Also read through the nvflash help but it seems I need a config file to do anything with it and that seems to require the CPUID.
Any suggestions on where I go from here?
lewmur said:
I made some progress. I got the V7-UNL-ICS-HC-bootloader-MULTI-cwm.zip, which had the driver and I now have "Nvidia USB Boot-recovery driver for Mobile devices" installed. It also has nvflash and several other apps. I read the link you have for getting the CPUID, but have to admit that it just throughly confused me. Also read through the nvflash help but it seems I need a config file to do anything with it and that seems to require the CPUID.
Any suggestions on where I go from here?
Click to expand...
Click to collapse
You MUST have yr cpuid....there are 8 methods in the guide. .if u cannot boot at all or have no nandroid it is difficult but not impossible. .see srbeens guide in general forum using linux to retrieve yr cpuid/sbk....dont try ANY flash or repair with win8, it wont work...win7, xp or linux only
Sent from my GT-I9300 using Tapatalk 4 Beta
dibb_nz said:
You MUST have yr cpuid....there are 8 methods in the guide. .if u cannot boot at all or have no nandroid it is difficult but not impossible. .see srbeens guide in general forum using linux to retrieve yr cpuid/sbk....dont try ANY flash or repair with win8, it wont work...win7, xp or linux only
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I tried the Linux method using a Mint 15 64bit box. I created the apx file without any errors but when I ran it, it got this error "Syntax error: Unterminated quoted string". I posted my error in the thread above this one and am hoping eppeP can tell me what's wrong.
BTW, I did check using lsusb that my tab was connected at 0955:7820
A Big Thanks to @Synthio for providing me these files.Without his help,this guide wouldn't have been possible at all.
Hi Peeps !!
A hard bricked OPX has nothing but a black screen (nothing ever comes on the screen, not even a boot logo ), it might vibrate when a power button is pressed and held for 20 seconds, has no Recovery partition, no adb mode, and no fastboot partition. The device might be detected in Linux and you might be able to even send commands to it. In Windows, the bricked OPX should be detected as QUALCOMM-HS USB Diagnostics xxxx. You might have a bricked OPX as a result of flashing a kernel meant for a different device (or a ROM meant for another device that included a kernel), tinkering with the boot logo or bootloader, or your attempt of unlocking the bootloader resulted in corrupting the boot partition.
The solution for OPX hardbrick is similar to OPO and OP2 - you just need a Qualcomm driver and a recover package.
So,here we go !!
Step 1 :- DOWNLOADS :-
1.) Drivers :- https://www.androidfilehost.com/?fid=24052804347799753 (Extract these files to a folder on desktop.)
2.) Recovery Tool :- https://drive.google.com/folderview?id=0B3gqVK2lYqBiY1M2NjRjVllvYXM&usp=sharing (Download all files inside this folder and put them in a folder on desktop.)
Step 2 :- If you are using Windows other than Windows XP,turn off Driver Signature Enforcement.To do so,follow this guide :- http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
Step 3 :- Press the power button for 40 seconds to turn off the phone.
Step 4 :- Press only volume up button for 10 sec and while keeping it pressed,connect OPX to PC.Hold volume up until your PC finds a new hardware .
Step 5 :- Go to device manager in your PC, find the new "QUALCOMM-HS USB Diagnostics xxxx" device or something like this (It must be Unknown Devices as QHUSB_BULK or under COMs and Ports as Qualcomm xxxx). Update its driver in property page using the Qualcomm driver provided (for 32bit windows, select x86 folder; for 64bit windows, select x64 folder).
Step 6 :- After installing the drivers,"Run As Administrator" the MSMDownloadToolV2.0 in the recovery tools folder.
Step 7 :- Click start at top left corner and wait for it to finish (Download Complete will come)
Step 8 :- Disconnect phone from PC and boot into system.
Now you can again do anything you wish to (unlock bootloader,etc).To unlock bootloader,go to developer options and tick "Enable OEM Unlock" first.
When you will need this guide ? :-
1.) If your phone is totally black (no racism)
2.) When you have locked the bootloader by mistake . (This happens when you flash a rom without having oem unlocking enabled.)
PS:- This method will wipe all data and restore your phone to OxygenOS and English Bootloader.
Thanks.
Hi
Great work!
I finally got a mod to close my thread and it has been closed.
I'll wait for the file that does not wipe /data
Thanks a loot. Gonna try it today at the end of the day.
Enviado do meu SM-N9005 através de Tapatalk
OnePlus*X*Unbrick Tool Mini... Only 47 MB is here :-
https://www.androidfilehost.com/?fid=24269982087019810
It doesn't wipe data either...
Sent from my ONE A2003 using Tapatalk
So if we are having the bootloader unlocked and try this tool to make it lock the bootloader? Means is it possible?
Silverstarjigar said:
So if we are having the bootloader unlocked and try this tool to make it lock the bootloader? Means is it possible?
Click to expand...
Click to collapse
No.It will keep the bootloader unlocked if it is unlocked already.
Man you are the real mvp... Thanks a lot some people i know are really screwed up because of thier opx got hard brick and there was no such guide available thanks alot mate really thanks
Will Try
Welp, ordered a new OPX yesterday. Just searched "qualcomm oneplus x driver" right when I woke up before work today and found this thread and felt stupid but saw it was as recent as today so I was pretty pumped. Thanks, will try ASAP and then can sell my other OPX, the new one or refuse delivery tomorrow . They deliver so fast now! 3 days!
thanks master sifoo.. my opx back to alive now ?
Thanks
Hello
Thank you for your post
I did all what's explained and when I run MSMDownloadToolV2.0 and click start it says "Waiting for device" and nothing happen!
I've been waiting more than 30 mints and nothing actually happen ..
Hope you help me ..
Thanks!
DANETO said:
Hello
Thank you for your post
I did all what's explained and when I run MSMDownloadToolV2.0 and click start it says "Waiting for device" and nothing happen!
I've been waiting more than 30 mints and nothing actually happen ..
Hope you help me ..
Thanks!
Click to expand...
Click to collapse
Can you give me Teamviewer access? I will see what the issue is and solve it.
Sent from my ONE A2003 using Tapatalk
Naman Bhalla said:
Can you give me Teamviewer access? I will see what the issue is and solve it.
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
OfCourse
but I'll download it now and I'll tell you once I finished
Thank you
Naman Bhalla said:
OnePlus*X*Unbrick Tool Mini... Only 47 MB is here :-
https://www.androidfilehost.com/?fid=24269982087019810
It doesn't wipe data either...
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
So, if I used this Mini Tool, what would it change on my phone? Kernel, system, etc...
Thank you for your hard work.
DANETO said:
OfCourse
but I'll download it now and I'll tell you once I finished
Thank you
Click to expand...
Click to collapse
Hi !!
Has your issue been solved or you still need help ? I am online for some hours now.
Aphex13 said:
So, if I used this Mini Tool, what would it change on my phone? Kernel, system, etc...
Thank you for your hard work.
Click to expand...
Click to collapse
It will not change system but will restore kernel to stock.
Naman Bhalla said:
Hi !!
Has your issue been solved or you still need help ? I am online for some hours now.
Click to expand...
Click to collapse
I tried to solve it many times but still remains
DANETO said:
I tried to solve it many times but still remains
Click to expand...
Click to collapse
PM me now with Teamviewer ID and pass. I will fix it in any case.
Sent from my ONE A2003 using Tapatalk
Did layers work for anyone??
Sent from my ONE E1003 using Tapatalk
Thanks my phone's alive once again.
Sent from my ONE E1003 using Tapatalk
Sorry for my bad english
Can this tool unbrick any case of hard brick ? For example when I change the fastboot logo ? When I type 'fastboot erase bootloader' ?
Envoyé de mon ONE E1003 en utilisant Tapatalk
I had a hard bricked note 4 N 910 G, I m searching from 10 days there no such a solution in any forum.....
when connect to computer It shows only in device manager "Qualcomm HS-Usb QDLoader9008 ( com10)".....
Please help me unbrick the phone....
Won't boot up
won't get download mode
or odin mode.......
I saw a video in you tube one plus one(youtube.com/watch?v=O2_x9SnJ1Ak), Same method can I use debrick my phone ? if possible plz give me the links those files for N910G
Please help me asap.....I m waiting for your help....... :crying::crying:
at least yours is still detected in Device manager, mine is already deadboot. are you still able to go download mode?
You could try to use a usb download jig. http://forum.xda-developers.com/showthread.php?t=819551
It was intended for the Galaxy S i9000, but i just found mine a few days ago and it works on my Note 4.
However the jig only works, if your bootloader is not broken.
Jaistah said:
at least yours is still detected in Device manager, mine is already deadboot. are you still able to go download mode?
Click to expand...
Click to collapse
thanks for quick reply....no .....unable to go download mode
loco- said:
You could try to use a usb download jig. http://forum.xda-developers.com/showthread.php?t=819551
It was intended for the Galaxy S i9000, but i just found mine a few days ago and it works on my Note 4.
However the jig only works, if your bootloader is not broken.
Click to expand...
Click to collapse
thanks for reply ,.........I will try later and i tell you the result dude.....
loco- said:
You could try to use a usb download jig. http://forum.xda-developers.com/showthread.php?t=819551
It was intended for the Galaxy S i9000, but i just found mine a few days ago and it works on my Note 4.
However the jig only works, if your bootloader is not broken.
Click to expand...
Click to collapse
Yeah unfortunately i don't get to see the samsung logo. it's pure black, needs JTag but software for it is not available
Jaistah said:
Yeah unfortunately i don't get to see the samsung logo. it's pure black, needs JTag but software for it is not available
Click to expand...
Click to collapse
loco- said:
You could try to use a usb download jig. http://forum.xda-developers.com/showthread.php?t=819551
It was intended for the Galaxy S i9000, but i just found mine a few days ago and it works on my Note 4.
However the jig only works, if your bootloader is not broken.
Click to expand...
Click to collapse
Dear Loco..... no... it is not working, Nothing will happened ....when i connect to rigged USB plug to the phone , my computer's device manager qualcomm hs-usb qdloader 9008 jumped to unknown device.......thats it.....? again removed battery and usb again shows qualcomm hs-usb qdloader 9008......... pls any other idea .....plz help me
Sorry, looks like your phone is completely bricked. Can't you send it to Samsung for repair?
What did you do to make this happen?
loco- said:
Sorry, looks like your phone is completely bricked. Can't you send it to Samsung for repair?
What did you do to make this happen?
Click to expand...
Click to collapse
they already quoted 11000 Indian Rs for mother board replace .........
Any other tricks....?
Pls Help me.......any other idea please .....is it problem from emmc...?
Samsung Note 4 (SM-N910G) Debrick file need
Samsung Note 4 (SM-N910G) Debrick file need emergency, (which file that i can put on a sd card and placed it into my dead Note 4 in order to it came to downloading mode)
n910g qualcomm problem...
Hii bro i am use samsung note 4 n910g i am meet same problem plz you try many type of method so any methods is not slove that problem only the problem completly clear as change to EMMC IC in mobile mother board not try jtag jig usb ufi box atf box sdc file....
New technician said:
Hii bro i am use samsung note 4 n910g i am meet same problem plz you try many type of method so any methods is not slove that problem only the problem completly clear as change to EMMC IC in mobile mother board not try jtag jig usb ufi box atf box sdc file....
Click to expand...
Click to collapse
My 910G is also in same condition .Have you found any solution for this? Plz explain what are you trying to say
Yesss I am clear the fault my mobile model n910g you need to use change emmc ic or aft 4 in 1 adapter and flash nitro box easy solution....
My note 4 dead while flashing with odin. No charging, no download mode, no response completely dead?. tried usb jig, Unbrick image everything. but no luck, nothing worked. No warranty for my mobile. It is Detected as Qualcomm HS_USB QDLoader 9008 in system ports. QFIL tool detects this but need 3 files. prog_emmc_firehose_xx.mbn , rawprogram0xml, and path0.xml. i googled it but no files for note 4. i believe QFIL tool bring back to life my device. Please help me to fix this.
Sudheerdarling said:
My note 4 dead while flashing with odin. No charging, no download mode, no response completely dead?. tried usb jig, Debrick image everything. but no luck, nothing worked. No warranty for my mobile. It is Detected as Qualcomm HS_USB QDLoader 9008 in system ports. QFIL tool detects this but need 3 files. prog_emmc_firehose_xx.mbn , rawprogram0xml, and path0.xml. i googled it but no files for note 4. i believe QFIL tool bring back to life my device. Please help me to fix this.
Click to expand...
Click to collapse
Have you referred this thread:
https://forum.xda-developers.com/showthread.php?t=3488114
Sent from my SM-N920G using Tapatalk
yashthemw said:
Have you referred this thread:
https://forum.xda-developers.com/showthread.php?t=3488114
Sent from my SM-N920G using Tapatalk
Click to expand...
Click to collapse
Thanks for your reply, all ready i tried. but no luck . after a whole night freezing, followed everything as you sad, flashed image file in SDHC memory. tried to power on many times in different ways as per instructions. but not even vibrate. no power on. is any different method here?
Sudheerdarling said:
Thanks for your reply, all ready i tried. but no luck . after a whole night freezing, followed everything as you sad, flashed image file in SDHC memory. tried to power on many times in different ways as per instructions. but not even vibrate. no power on. is any different method here?
Click to expand...
Click to collapse
Hi Sudheer,
hav u fixed ur mobile ?
if yes tell me how i will giv a try...
mine is a N910G India model....i hav tried all the methods but unsuccessful...kindly help
SAME here same problem / u fixed it ?
is your phone stuck in qualcomm mode or are u trying to get into it?
what was the last thing you were doing or what was the cause of the fail?
Hey guys I just installed the full image of 7.1.2 beta 2 over top of beta 1 using Flashfire without the bootloader and modem selected and all went fine until I decided to use Flashfire to upgrade the bootloader and modem forgetting that we must use Fastboot as I am new to Flashfire and I was reading all through the beta thread before I did it and didn't understand we still must use Fastboot so anyways I am stuck in a hard brick now with the phone not powering on at all and can't do anything to restore it as my Windows 10 now detects the phone as unknown device (device descriptor request failed) is there anything I can do at this point as I just bought this phone used.
The error that I got in Flashfire was that the device storage is full when updating the bootloader as the modem went fine.
@rmorris003
You said the phone won't even power on. You mean no Google? Hold the power button down for a couple of minutes and see if it will reboot. If not put it on a charger, and after fully charging try the long press power button again. If you can get it to start, try to put it in fastboot mode. (ie. power+vol dn). If you can get to bootloader you can send fastboot commands and fix it. If you can get to this point, there are instructions here.
rmorris003 said:
Hey guys I just installed the full image of 7.1.2 beta 2 over top of beta 1 using Flashfire without the bootloader and modem selected and all went fine until I decided to use Flashfire to upgrade the bootloader and modem forgetting that we must use Fastboot as I am new to Flashfire and I was reading all through the beta thread before I did it and didn't understand we still must use Fastboot so anyways I am stuck in a hard brick now with the phone not powering on at all and can't do anything to restore it as my Windows 10 now detects the phone as unknown device (device descriptor request failed) is there anything I can do at this point as I just bought this phone used.
The error that I got in Flashfire was that the device storage is full when updating the bootloader as the modem went fine.
Click to expand...
Click to collapse
Hello... Well if your device is recognized as unknown, you could try to give this a shot:
https://forum.xda-developers.com/nexus-6p/general/howtos-debrick-nexus-6p-stuck-edl-9008-t3552838
Try to install Qualcomm driver first check the device manager. If you see your phone recognized as:
HS-USB QDLOADER 9008
You may be lucky!
Good luck...
5.1 said:
Hello... Well if your device is recognized as unknown, you could try to give this a shot:
https://forum.xda-developers.com/nexus-6p/general/howtos-debrick-nexus-6p-stuck-edl-9008-t3552838
Try to install Qualcomm driver first check the device manager. If you see your phone recognized as:
HS-USB QDLOADER 9008
You may be lucky!
Good luck...
Click to expand...
Click to collapse
I will try this when I get back from work, I just cant get my pc to see it as anything other than unknown device as it says this is the best driver for it.
rmorris003 said:
I will try this when I get back from work, I just cant get my pc to see it as anything other than unknown device as it says this is the best driver for it.
Click to expand...
Click to collapse
I see... There's a txt file in the driver folder. Follow its instructions.
Good luck...
5.1 said:
I see... There's a txt file in the driver folder. Follow its instructions.
Good luck...
Click to expand...
Click to collapse
I am stumped, I have disabled driver enforcement and can't get any drivers to see my phone so I am not sure what to do.
rmorris003 said:
I am stumped, I have disabled driver enforcement and can't get any drivers to see my phone so I am not sure what to do.
Click to expand...
Click to collapse
You disabled driver signature and rebooted your computer? Then installed Qualcomm drivers from the thread I linked you to? I think you have to reboot your computer once more...
Good luck...
I held the power and vol down and now it shows up under com ports so this is a good sign.
Ok got bootloader back and now put twrp on, I had to use qfil with nexus6p_fix_bricked but it got stuck at writing system.img but atleast the phone is on now.
Flashed the 7.1.2 beta 2 full image using the fastboot method included and all is back to normal.
Thanks so much for the help.
rmorris003 said:
Ok got bootloader back and now put twrp on, I had to use qfil with nexus6p_fix_bricked but it got stuck at writing system.img but atleast the phone is on now.
Flashed the 7.1.2 beta 2 full image using the fastboot method included and all is back to normal.
Thanks so much for the help.
Click to expand...
Click to collapse
Wow glad it worked for you... You might push the thanks button in the OP of the thread where you found the debrick tools and thanks @tenfar since he offered the solution. He already saved a few N6P devices. I only linked you to his thread which you could have found yourself anyway...
Cheers...
5.1 said:
Wow glad it worked for you... You might push the thanks button in the OP of the thread where you found the debrick tools and thanks @tenfar since he offered the solution. He already saved a few N6P devices. I only linked you to his thread which you could have found yourself anyway...
Cheers...
Click to expand...
Click to collapse
I'm pretty sure I was reading it before but I had to do some extensive reading on how to get the driver to read properly. I work night shift so I was kinda tired yesterday.
rmorris003 said:
I'm pretty sure I was reading it before but I had to do some extensive reading on how to get the driver to read properly. I work night shift so I was kinda tired yesterday.
Click to expand...
Click to collapse
You could report your experience in the other thread. Maybe it could help other users who faced the issue you had. :good:
Cheers...
rmorris003 said:
I'm pretty sure I was reading it before but I had to do some extensive reading on how to get the driver to read properly. I work night shift so I was kinda tired yesterday.
Click to expand...
Click to collapse
Hi there, I'm extremely new to Forums and the whole android scene please could you help?
I have the same issue with my Nexus 6P Hard bricked, only detected as a 9008 Port, no vibrations no power nothing!
I've tried to follow so many guides for the past three days however I've managed nothing. I've tried to do as you mentioned in the first posts, used the nexus6p_unbrick in Qfil but Sahara download fails.
Please Please Help, No Warranty just a Brick!
Clarkeofcurtis said:
Hi there, I'm extremely new to Forums and the whole android scene please could you help?
I have the same issue with my Nexus 6P Hard bricked, only detected as a 9008 Port, no vibrations no power nothing!
I've tried to follow so many guides for the past three days however I've managed nothing. I've tried to do as you mentioned in the first posts, used the nexus6p_unbrick in Qfil but Sahara download fails.
Please Please Help, No Warranty just a Brick!
Click to expand...
Click to collapse
I have the same exact problem, everytime i try to flash with qfil it says it can't connect to my COMPORT
Clarkeofcurtis said:
Hi there, I'm extremely new to Forums and the whole android scene please could you help?
I have the same issue with my Nexus 6P Hard bricked, only detected as a 9008 Port, no vibrations no power nothing!
I've tried to follow so many guides for the past three days however I've managed nothing. I've tried to do as you mentioned in the first posts, used the nexus6p_unbrick in Qfil but Sahara download fails.
Please Please Help, No Warranty just a Brick!
Click to expand...
Click to collapse
Falitheman said:
I have the same exact problem, everytime i try to flash with qfil it says it can't connect to my COMPORT
Click to expand...
Click to collapse
Hello,
Someone mentioned this in another post:
Hold volume up and plug the USB cord to.your computer and start qfil flash. Keep holding volume up until the flash ends...
Good luck...
5.1 said:
Hello,
Someone mentioned this in another post:
Hold volume up and plug the USB cord to.your computer and start qfil flash. Keep holding volume up until the flash ends...
Good luck...
Click to expand...
Click to collapse
So i have some good news...it connects now. it says start sending programmer but then it says download failed: unable to download flash programmer using sahara protocol and then it fails. Any help?:crying:
Falitheman said:
So i have some good news...it connects now. it says start sending programmer but then it says download failed: unable to download flash programmer using sahara protocol and then it fails. Any help?:crying:
Click to expand...
Click to collapse
Hey,
What version of qpst did you install?
Good luck...
5.1 said:
Hey,
What version of qpst did you install?
Good luck...
Click to expand...
Click to collapse
I am using 2.7.441
Update: It seemed to be working for a second but then it says download failed: qsahara server fail: process fail. Any idea what that means? I really need my phone back
Falitheman said:
I am using 2.7.441
Update: It seemed to be working for a second but then it says download failed: qsahara server fail: process fail. Any idea what that means? I really need my phone back
Click to expand...
Click to collapse
Hey,
Google qpst 2.7.453
It's easy to find. Scan the files on virustotal.com though.
Maybe the older versions are incompatible...
Good luck...
5.1 said:
Hey,
Google qpst 2.7.453
It's easy to find. Scan the files on virustotal.com though.
Maybe the older versions are incompatible...
Good luck...
Click to expand...
Click to collapse
I tried with the version you suggested and i got the same error i just had. Can you send me your version so i can see if that works?