Please don't respond to me with: you should not have to disable secure download etc..
I just realy need to disable the secure download so I can flash my SM-G900T back to SM-G900F firmware.
WTF You don't flash firmwares between different models!
I dont think you can disable it, even if you can as justinxfan said you can't do complete firmware flashes of a different model.
Sent from my SAMSUNG-SM-G900A using Tapatalk
justinxfan said:
WTF You don't flash firmwares between different models!
Click to expand...
Click to collapse
I know, I did it like a 6 months ago, I bought a 900F and then flashed it with 900T firmware and now I can't flash it back to it's original fw.
So there really is no way to disable secure download?
ZEF-BEAST said:
I know, I did it like a 6 months ago, I bought a 900F and then flashed it with 900T firmware and now I can't flash it back to it's original fw.
So there really is no way to disable secure download?
Click to expand...
Click to collapse
That's impossible there's no way you could've done that unless it was a G900T disguised as a fake G900F or you bricked it. What model does it say in Download mode?
justinxfan said:
That's impossible there's no way you could've done that unless it was a G900T disguised as a fake G900F or you bricked it. What model does it say in Download mode?
Click to expand...
Click to collapse
Download mode now says SM-G900T
But I know for sure it was SM-G900F when I bought it.
And if I check my imei number on imei.info it shows SM-G900F
http://www.imei.info/?imei=352558067456393
It's pretty difficult to change what download mode reports, I don't know so I won't go as for as to say impossible, I would trust it though, if everything software related is saying 900T and the sticker says F I would trust download mode more.
Sent from my SAMSUNG-SM-G900A using Tapatalk
It's a G900T. It was never a G900F. Many people have the same situation. They buy the S5 thinking it's the G900F but sellers falsely label it as the G900F while it's a different model. This is because the G900F will sell much better because it's not a carrier model.
---------- Post added at 03:05 PM ---------- Previous post was at 03:00 PM ----------
ZEF-BEAST said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I dont think I have a fake version.
Click to expand...
Click to collapse
That sticker behind the battery looks pretty fake. The battery on the S5 is 2800 Mah, not 1800 as it shows on the sticker.
But what about the imei? When I check it on imei.info
it shows 900F.
Me too... My phone before is G900F and i brick it and then i don't know i just flash something and then it become G900K. My model version at the back is g900f but in download mode is g900k.
justinxfan said:
WTF You don't flash firmwares between different models!
Click to expand...
Click to collapse
r u sure? I think this is experienced when using like a d2lte vs d2spr, or d2cri
can someone help me get TWRP on my S5, using odin fails
mr_reaper said:
can someone help me get TWRP on my S5, using odin fails
Click to expand...
Click to collapse
What model is ur s5?
What service provider is the phone through?
What version of Android are you running?
Have u ever flashed the phone before?
thefourthjokerscard said:
What model is ur s5?
Galaxy S5 SM-S903VL
Straight Talk
6.0.1
nah, its brand new
this is what odin says....
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
didnt happen on my other phones
Click to expand...
Click to collapse
**
Try this --->
drive.google.com/file/d/0B3quVdCaxqLfODVxTkR0ZTVwVW8/view?usp=sharing
Well, certainly without some advanced knowledge and research flashing entire firmwares between models is ill advised for sure..
However, I have an SM-N9100 =- that's the Chinese duals SIM variant Note 4 -- and I've gotten more than a few different Note 4 firmwares to function just fine thank-yew.
I'm still figuring out HOW I managed to do that.. LOL
You can try to flash Firmware in binary form (SamFirm), I had an issue with flashing unbranded firmware on my S5 as it always told me wrong partition size (I think for CSC). Flashing in binary form fixed it. So probably (safe) repartition phone is only possible this way.
Another thing you can try is to downgrade your firmware to KitKat. For me it helped once restoring lost IMEI in combination with EFS Professional.
But if your IMEI is still alright (*#06#) make a EFS Backup first. Samsung made it far too easy to corrupt EFS partition, happened to me already a few times, but always had a backup after the first time that fixed it in a minute. Otherwise it's a lot of work.
Related
Stock Firmware 4.0.4 GT-I9100ZCLPL
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
GT-I9100 - China
PDA: I9100ZCLPL
CSC: I9100OZHLPL
Version: 4.0.4
Date: 2012-07-02
Regions: China, Hong Kong
Download
Change log? How is this different from the leaked firmware?
rajarshi10 said:
Change log? How is this different from the leaked firmware?
Click to expand...
Click to collapse
Changelist : 802932
AFAIK it's an official one
How do i install this with odin over 4.0.3 xwlpg, i get fail after start. I have used odin many times before with fus stock images, but now it won't update. Should i use specific .pit, never needed one.
Using the single stock file from fus.
Sent from my GT-I9100 using xda app-developers app
don't use any .pit, unless you're sure you really need it!!!
m.kochan10 said:
don't use any .pit, unless you're sure you really need it!!!
Click to expand...
Click to collapse
That's also my idea, never used it on the SGS2.
Still it doesn't flash. Just flashed XWLPI, that was no problem at all. Flashing this one just stops after:
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
and then a <FAIL> message and it stops updating
Same here!
for china
the bootloader of chinese rom is different,you must flash u1_chn_mapdata.pit、U1_bridge_bootloader_CHN_signing.tar first！
China I9100 is diffrent than International version of Samsung I9100
Please do not try flashing
lvvine said:
China I9100 is diffrent than International version of Samsung I9100
Please do not try flashing
Click to expand...
Click to collapse
ok thanks, i'll (try to) wait
And with this 2012 July 4.0.4 I9100ZCLPL I9100OZHLPL same problem, is listed at samfirmware as europe fw.
please sumone tell me is it safe to flash GT-I9100LKACHN I9100ZCLPL via mobile odin??
No.change the bootloader first
Inviato dal mio GT-I9100 con Tapatalk 2
I flashed it and it was fine except for losing my google account and no option to restore it. Then I restored my Nandroid backup of XXLQ5 but now my phone doesn't show any signs of life, not even a charging animation. I assume I need to find a JTAG service but just in case, does anyone have a better option? It's a good thing that my S3 is on it's way.
Can u give link to the chinese .pit file and the bootloader pls
Phone_Guru said:
I flashed it and it was fine except for losing my google account and no option to restore it. Then I restored my Nandroid backup of XXLQ5 but now my phone doesn't show any signs of life, not even a charging animation. I assume I need to find a JTAG service but just in case, does anyone have a better option? It's a good thing that my S3 is on it's way.
Click to expand...
Click to collapse
Have you tried USB jig?
Phone_Guru said:
I flashed it and it was fine except for losing my google account and no option to restore it. Then I restored my Nandroid backup of XXLQ5 but now my phone doesn't show any signs of life, not even a charging animation. I assume I need to find a JTAG service but just in case, does anyone have a better option? It's a good thing that my S3 is on it's way.
Click to expand...
Click to collapse
I did the same procedure restoring a CM9 Backup with CWM manager. Now my Galaxy S2 is dead. I'm waiting for tomorrow to do the JTAG procedure .
Now I know that I'm not alone with this problem. Be aware.
Update:
My Galaxy S2 is officialy dead... JTAG Failed to recover my s2 =( .... I hate this leaked Rom =(
Interesting, means the official 4.04 have the brick bug too. ( Chinese ROM is official)
Can anyone confirm? Or is it because nandroid restore was of that lq5.
i too bricked my galaxy s2
atifsh said:
Interesting, means the official 4.04 have the brick bug too. ( Chinese ROM is official)
Can anyone confirm? Or is it because nandroid restore was of that lq5.
Click to expand...
Click to collapse
i too bricked my galaxy s2 i9100, day before i had installed the I9100XXLQ5_I9100OXALQ5_OXA official leaked firmware from samfirmware then i found a deodexed XXLQ5_DEODEXED.zip on xda forum, i installed everything was running fine until i tried installing "Resurrection-remix_ics_V2.5.3_AOKP-B40-4.0.4.zip" via CWM, while flashing the Resurrection-remix_ics_V2.5.3_AOKP-B40-4.0.4.zip the whole process freezed, n after sometime my phone switched off automatically n didnt turned on, i think its dead now....
so i am not sure whether its because of the leaked firmware or for something else...
Low ship I9300 firmware for flashing with PIT.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I used Heimdall to download the PIT from phone and it is almost identical to the pit found on web... except the ending zeros....
Downloading I9300 PIT using Heimdall:
I would appreciate all professional feedback.
THe firmware contains the below files.
boot.img
cache.img
hidden.img
modem.bin
param.bin
recovery.img
sboot.bin
system.img
tz.img
I don't know what is:
tz.img
Any clue?
I will update the thread with my findings.
All this may be obvious for some, but I also met many people who miss "flashing with PIT" option.
I also read often that flashing with pit is not advised and dangerous.
So do all this carefully...
DOWNLOAD 3-FILES FIRMWARE
https://hotfile.com/dl/156320160/eb4a939/I9300XXALE8_I9300OJVALE7_OJV.zip.html
PIT file:
View attachment I9300.zip
can mx.pit be used for 32gb s3 ??
thank you.
I still fail to see why anyone (with a working device) would want to flash using .PIT.... so many things that can go wrong with that....
sebarkh said:
I don't know what is:
tz.img
Any clue?
Click to expand...
Click to collapse
ARM Trust Zone. (link)
The zeros in the other PIT file is padding.
Which is which, is the padded the one you downloaded or the one comming with the update?
Not sure if the padding it required for flashing, I suppose not, so if they are identical expect for those zeros, they are identical.
The pit "with zeros" is the one I downloaded from the device.
The one without zeros is the one found on the internet (I suppose 29.03.2012 version).
Sent from my Galaxy SIII
The padding is probably done by Odin anyway.
Sent from my GT-I9300 using xda app-developers app
I actually want to reflash everything possibly onto my phone. I believe the modem area is corrupted because I can get data but no talk or text. It's a common issue and people say only sending the device to Samsung will fix it, but the phone is from the UK and I live in the US. How would I go about flashing these with ODIN, and would they do anything? I've tried EVERYTHING possible to fix the issue, including flashing new modems, ROMs, stock ROMs, kernels, formatting partitions, etc.
Im curious if there is a full firmware that will format all data on the phone. Like DATA.IMG in galaxy s2 i9100.
[please can you upload file in the other link hotfile closed please i need this tuto so much i be thankfull
odin3-1.81
efs clear
boot loader update with rescue files
thank you :laugh:
Does somebody has a fresh link for this firmware. Please no OCH with premium options. THX!
overflyer said:
Does somebody has a fresh link for this firmware. Please no OCH with premium options. THX!
Click to expand...
Click to collapse
anyone have new link ?? pls update
overflyer said:
Does somebody has a fresh link for this firmware. Please no OCH with premium options. THX!
Click to expand...
Click to collapse
[email protected] said:
anyone have new link ?? pls update
Click to expand...
Click to collapse
http://fr.sourceforge.jp/projects/s...0/Stock rom/I9300XXALE8_I9300OJVALE7_OJV.zip/
sebarkh said:
PIT file:
View attachment 1221587
Click to expand...
Click to collapse
Hey man, don't know if you're still active, since it's what like 6.
However thank you so much for this file. It has saved my bacon.
Just got a new S9, trading in my olddddd S3. Turned it back on before sending it off, and it's modded to ****. Needed to revert it before I sent it back! Could not flash anything to it. Tried with your .pit file. and it's worked perfectly!
Thank you!
Amiasbacon said:
Hey man, don't know if you're still active, since it's what like 6.
However thank you so much for this file. It has saved my bacon.
Just got a new S9, trading in my olddddd S3. Turned it back on before sending it off, and it's modded to ****. Needed to revert it before I sent it back! Could not flash anything to it. Tried with your .pit file. and it's worked perfectly!
Thank you!
Click to expand...
Click to collapse
OMG,
Sooo many years. And it's still serving somebody!
The build is N910T3UVU1DOFC.
Has hit the download already! Download at Sammobile | Moderator Edit - Direct Link Removed (enjoy!)
→ Source
Moderator Edit- Please be aware of the possibility that this is not for your device. I have no way of testing, but it appears several of you are trying.
This information is correct as of 8/5/2015:
TEKHD said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Source: http://androiding.how/download-t-mobile-note-4-5-1-1-firmware-n910t3uvu1dofc/
DO NOT ODIN ON N910T - REPEAT -> DO NOT ODIN ON N910T
5.1.1 is not even at "Manufacturer Development" Stage yet...
https://support.t-mobile.com/community/phones-tablets-devices/software-updates#
Click to expand...
Click to collapse
anyone try this yet?
Ain't buying it, just checked..
Not sure about 910t3 but I guess it's possible!
Good luck
Kies isn't pulling anything, COD6 is the latest it reports.
Could be an international version?
Sent from my SM-N910T using XDA Free mobile app
SM-N910T3 is the Korean variant. Do not install...
mightykc said:
SM-N910T3 is the Korean variant. Do not install...
Click to expand...
Click to collapse
Yes, just noticed and googled it, weird tho, its says tmo usa
Sent from my SM-N910T using XDA Free mobile app
well i downloaded it... should i try it?
This is wierd
Install at your own peril!
apatcas said:
well i downloaded it... should i try it?
Click to expand...
Click to collapse
I am not seeing anyone I have come to trust reporting this. Never heard of the site linked. Not saying they're lying or wrong, but I wouldn't put it on my device
KingBeef said:
I am not seeing anyone I have come to trust reporting this. Never heard of the site linked. Not saying they're lying or wrong, but I wouldn't put it on my device
Click to expand...
Click to collapse
Well it IS on SamMobile and labeled as T-Mobile USA: http://www.sammobile.com/firmwares/database/SM-N910T3/
There are actually SM-N910T, SM-N910T2, and SM-N910T3 acording to the Bluetooth SIG site: https://www.bluetooth.org/tpg/QLI_viewQDL.cfm?qid=25312
My guess is they are just different hardware revisions of the T-Mobile USA variant. I remember the Note 3 had at least two hardware revisions, the second one had a different display driver chip than the first one and TRWP had to build a new version for it to make the screen brightness work again.
This firmware image could be just a "common" firmware image for all three revisions.
siraltus said:
Well it IS on SamMobile and labeled as T-Mobile USA: http://www.sammobile.com/firmwares/database/SM-N910T3/
Maybe the model number is just a typo?
Click to expand...
Click to collapse
Could be? Can anyone with a sammobile account upload or does it have to come from a site admin? I am also a little surprised they don't have a post on it up.
Going to flash when I get home from work. I extracted the modem and looks like it has the "T-Mobile USA Root CA" in it as well as the following line:
N910T3UVU1DOFC 1976227 SM-N910T MDM9225M REV1.1 N910T.002
Looks good to me!
Source: http://androiding.how/download-t-mobile-note-4-5-1-1-firmware-n910t3uvu1dofc/
DO NOT ODIN ON N910T - REPEAT -> DO NOT ODIN ON N910T
5.1.1 is not even at "Manufacturer Development" Stage yet...
https://support.t-mobile.com/community/phones-tablets-devices/software-updates#
For what its worth here is the build info from COD6 vs DOFC modem.bin. It looks like they both refer to the N910T as N910T.002 and both using the Qualcomm MDM9225M baseband.
COD6 = N910TUVU1COD6 1935620 SM-N910T MDM9225M REV1.1 N910T.002
DOFC = N910T3UVU1DOFC 1976227 SM-N910T MDM9225M REV1.1 N910T.002
I've made a flashable zip of it and tried it on the n910f but didn't boot got an error with the modem. I had no issues restoring a backup though if anyone on a tmob wants to try
Sent from my SM-N910F using Tapatalk
sawdoctor said:
I've made a flashable zip of it and tried it on the n910f but didn't boot got an error with the modem. I had no issues restoring a backup though if anyone on a tmob wants to try
Sent from my SM-N910F using Tapatalk
Click to expand...
Click to collapse
Would love to give it a shot! I'm at work so can't ODIN at the moment but a zip would be great so I can try it now.
nitroxeno said:
Would love to give it a shot! I'm at work so can't ODIN at the moment but a zip would be great so I can try it now.
Click to expand...
Click to collapse
Sending you a pm now
Sent from my SM-N910F using Tapatalk
Tried to flash via Odin, and failed.
@sawdoctor, I'll give the flashable a try. Thx.
jaxenroth said:
Tried to flash via Odin, and failed.
@sawdoctor, I'll give the flashable a try. Thx.
Click to expand...
Click to collapse
The zip is failing because of the modem on the tmob as well by the looks of things. Flashing the modem.bin and non hlos.bin with odin Might get the zip to boot but I don't know
Sent from my SM-N910F using Tapatalk
My phone settings says I have a G900F but download mode says G900V. My phone was "new" from eBay but I'm pretty sure the firmware was modified. I'm assuming I actually have a G900V, correct?
wasiq224 said:
My phone settings says I have a G900F but download mode says G900V. My phone was "new" from eBay but I'm pretty sure the firmware was modified. I'm assuming I actually have a G900V, correct?
Click to expand...
Click to collapse
Hi wasiq224
It should be so. I may suggest you
Phone INFO ★Samsung★
Nice regards and have fun.
.
wasiq224 said:
My phone settings says I have a G900F but download mode says G900V. My phone was "new" from eBay but I'm pretty sure the firmware was modified. I'm assuming I actually have a G900V, correct?
Click to expand...
Click to collapse
Forget everything apart from download mode, everything else can be modified, even that Samsung INFO app will lie if firmware has been modified etc
Always trust download mode, your phone is the G900V if that's what download mode says
*Detection* said:
Forget everything apart from download mode, everything else can be modified, even that Samsung INFO app will lie if firmware has been modified etc
Always trust download mode, your phone is the G900V if that's what download mode says
Click to expand...
Click to collapse
Thanks for the reply. So since I obviously received a modified phone I am not getting any marshmallow update. Would I be able to flash a stock G900V or G900F 6.0.1 ROM from SamMobile without losing my phone data?
*Detection* said:
even that Samsung INFO app will lie if firmware has been modified
Click to expand...
Click to collapse
I'm sorry *Detection*
Even when everything has been already modded, including changing CSC (as I did), the information provided by "Samsung INFO" at "CSC CODE -> Product Code" is kept valid as your original CSC.
That's the exact information the user need to accomplish his demand.
Nice regards.
.
Kdio said:
I'm sorry *Detection*
Even when everything has been already modded, including changing CSC (as I did), the information provided by "Samsung INFO" at "CSC CODE -> Product Code" is kept valid as your original CSC.
That's the exact information the user need to accomplish his demand.
Nice regards.
.
Click to expand...
Click to collapse
Yea, that's gonna be nice and easy for a member who doesn't know what to trust, or where to look, or which numbers mean what, come on, use your head, do you realise how many model numbers it would likely say in that app if the firmware has already been modified to say G900F?
Download mode is nice and easy for all to remember and doesn't require installing 3rd party apps, not to mention, OP already stated it says G900V in download mode, and I would have thought someone as high and mighty as yourself would have already known that download mode is always correct, no?
No need to reply, bit sick of your condescending attitude, you should know better, especially at 53 years old, Kido
---------- Post added at 15:29 ---------- Previous post was at 15:28 ----------
wasiq224 said:
Thanks for the reply. So since I obviously received a modified phone I am not getting any marshmallow update. Would I be able to flash a stock G900V or G900F 6.0.1 ROM from SamMobile without losing my phone data?
Click to expand...
Click to collapse
G900V on Verizon?
You could try grabbing a stock ROM from sammobile .com or use the samfirm tool here on XDA, not sure how much success you'll have, Verizon lock their bootloaders, but worth a shot checking this thread if you can't manage it
http://forum.xda-developers.com/ver...t/rd-unlocking-galaxys-s5-bootloader-t3337909
You can't install a G900F stock ROM, only G900V
*Detection* said:
G900V on Verizon?
You could try grabbing a stock ROM from sammobile .com or use the samfirm tool here on XDA, not sure how much success you'll have, Verizon lock their bootloaders, but worth a shot checking this thread if you can't manage it
http://forum.xda-developers.com/ver...t/rd-unlocking-galaxys-s5-bootloader-t3337909
You can't install a G900F stock ROM, only G900V
Click to expand...
Click to collapse
I appreciate your reply. So here's the deal. I bought this from eBay thinking it was gonna be an unlocked G900A to use with cricket. I then realized it was modified and by that time the seller wouldn't do anything about it. So you're saying that even though the G900F and G900V have the same specs, I can't install the marshmallow firmware? Also, if I received a modified phone, wouldn't the bootloader already be unlocked?
wasiq224 said:
I appreciate your reply. So here's the deal. I bought this from eBay thinking it was gonna be an unlocked G900A to use with cricket. I then realized it was modified and by that time the seller wouldn't do anything about it. So you're saying that even though the G900F and G900V have the same specs, I can't install the marshmallow firmware? Also, if I received a modified phone, wouldn't the bootloader already be unlocked?
Click to expand...
Click to collapse
The problem is the bootloader, stock ROMs have different BLs for each model, so for example, (iirc) the G900T is more or less identical to the G900F, but the bootloaders and modems are different, meaning you can not flash the stock ROM of one to another, but, if you mod the ROM to be flashable in custom recovery such as TWRP, then without the BL or Modem present in the ROM, it will flash, and will work perfectly
I had the G900T 5.1.1 running on my G900F when we were still stuck on 5.0
But it was modded for TWRP
As for whether or not your phones bootloader is unlocked, you'd have to try flashing something that needs an unlocked BL, an earlier stock ROM for example (Or check that BL unlock thread, see if there is a test)
Chances are the phone was either rooted, and the build.prop edited to change the settings about info to G900F, or there's another trick I don't know about yet that they use to push modded firmware onto non G900F phones
See it a lot here, loads of people with non G900F getting ripped off by sellers changing the model number or firmware to say G900F, but you can't change Download mode, which is why we always say to trust that
Personally, I would flash a stock G900V 6.0.1 firmware to it (Available on sammobile .com / samfirm tool) (or give flashing TWRP a shot, then you have custom ROMs to play with, but I'd check the BL status first if you can, don't want to cause a brick)
G900VVRU2DPD1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 19:01 ---------- Previous post was at 18:46 ----------
Samfirm download
http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Hello,
Samsung Galaxy S7 Edge Tmobile - Unlocked (Came with T mobile bloatware)
I had bought SM-G935T unlocked, I was using it with Lycamobile and I wasn't getting proper reception. I played around with ODIN and installed SM-G935U then SM-G935T again but this time, I updated to 8.0.
After flashing, I cannot make phone calls, cannot receive phone calls, cannot use LTE or mobile data network. Tried with other sim cards but nothing works. Wifi and Bluetooth works fine, everything else works fine in the phone.
Can someone help?
Phone information:
Android Version: 8.0
Samsung Experience: 9.0
Baseband: G935TUVS9CSB2
Build Number: R16NW.G935TUVS9CSB2
SE for Android Status:
Enforcing
SEPF_SM-G935T_8.0.0_0017
KNOX version
Knox 3.1
Knox API level 25
TIMA 3.3.0
If you guys need any more information please let me know I can provide.
Thank you in advance.
check your IMEI, you probably messed it up. hope you have EFS backup
yaro666 said:
check your IMEI, you probably messed it up. hope you have EFS backup
Click to expand...
Click to collapse
IMEI is visible. No, I don't have EFS backup.
omgitzgandhi said:
IMEI is visible. No, I don't have EFS backup.
Click to expand...
Click to collapse
its probably the CSC. When youre flashing the tar.md5 file, i assume you didnt flash the CSC, correct?
youdoofus said:
its probably the CSC. When youre flashing the tar.md5 file, i assume you didnt flash the CSC, correct?
Click to expand...
Click to collapse
I flashed everything a couple of times.
even Home CSC and CSC (nonhome)
Took it to Samsung customer care, they flashed it a couple of times too.
Still no Network (no calls - outgoing/incoming and no Mobile internet), However sim gets recognised - ATT, Tmobile, lyca, Ultramobile
omgitzgandhi said:
I flashed everything a couple of times.
even Home CSC and CSC (nonhome)
Took it to Samsung customer care, they flashed it a couple of times too.
Still no Network (no calls - outgoing/incoming and no Mobile internet), However sim gets recognised - ATT, Tmobile, lyca, Ultramobile
Click to expand...
Click to collapse
try a new tarball from sammobile.com.
youdoofus said:
try a new tarball from sammobile.com.
Click to expand...
Click to collapse
I have installed this: https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935T/TMB/download/G935TUVS9CSB2/259292/
Still not working.
omgitzgandhi said:
I have installed this: https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935T/TMB/download/G935TUVS9CSB2/259292/
Still not working.
Click to expand...
Click to collapse
there are 4 other versions on sammobile that are still android 8.0 and since its a 935t, you can also use the 935f firmware. youre nowhere near being out of options
youdoofus said:
there are 4 other versions on sammobile that are still android 8.0 and since its a 935t, you can also use the 935f firmware. youre nowhere near being out of options
Click to expand...
Click to collapse
So what should I do? I think when the phone came it was SM-G935(F).
Should I Install Latest Sm-G935F?
Or if its something else, can you share link?
omgitzgandhi said:
So what should I do? I think when the phone came it was SM-G935(F).
Should I Install Latest Sm-G935F?
Or if its something else, can you share link?
Click to expand...
Click to collapse
if the hardware id a G935F, then flash the most current G935F firmware on it, factory reset in recovery afterwards, profit, go have a sammich because you fixed your phone make sure you do this in exactly this order, the last two are optional, but recommended
youdoofus said:
if the hardware id a G935F, then flash the most current G935F firmware on it, factory reset in recovery afterwards, profit, go have a sammich because you fixed your phone make sure you do this in exactly this order, the last two are optional, but recommended
Click to expand...
Click to collapse
I will do this and let you know. Thank you.
omgitzgandhi said:
I will do this and let you know. Thank you.
Click to expand...
Click to collapse
right on. also let me know what kind of sammich you make. i like sammiches
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
omgitzgandhi said:
Hello,
Samsung Galaxy S7 Edge Tmobile - Unlocked (Came with T mobile bloatware)
I had bought SM-G935T unlocked, I was using it with Lycamobile and I wasn't getting proper reception. I played around with ODIN and installed SM-G935U then SM-G935T again but this time, I updated to 8.0.
After flashing, I cannot make phone calls, cannot receive phone calls, cannot use LTE or mobile data network. Tried with other sim cards but nothing works. Wifi and Bluetooth works fine, everything else works fine in the phone.
Can someone help?
Phone information:
Android Version: 8.0
Samsung Experience: 9.0
Baseband: G935TUVS9CSB2
Build Number: R16NW.G935TUVS9CSB2
SE for Android Status:
Enforcing
SEPF_SM-G935T_8.0.0_0017
KNOX version
Knox 3.1
Knox API level 25
TIMA 3.3.0
If you guys need any more information please let me know I can provide.
Thank you in advance.
Click to expand...
Click to collapse
https://gsmhungvu.com/samsung-g935fd-firmnware-file-android-oreo-8-0/
gupt07ash said:
https://gsmhungvu.com/samsung-g935fd-firmnware-file-android-oreo-8-0/
Click to expand...
Click to collapse
This says Sm-g935FD,
will this work for my Sm-G935F? (Not FD)
omgitzgandhi said:
This says Sm-g935FD,
will this work for my Sm-G935F? (Not FD)
Click to expand...
Click to collapse
It will
omgitzgandhi said:
This says Sm-g935FD,
will this work for my Sm-G935F? (Not FD)
Click to expand...
Click to collapse
you can flash any G935 firmware to any G935 device and it will boot as long as the kernel is written for the type of processor you have in your device. If its a snapdragon, any snapdragon G935 tar.md5 will work and boot, likewise with the xynos based tar.md5's. Ive flashed a G935f on a G935V before and it worked fine