Database Users

Going back to Stock

Hi!
I'm trying to go back to stock+locked rom.
I have seen instructions with a lot of steps, but when I downloaded the rom from googe developers page, i noticed there is a flash-all.sh file that seems to do all the process...
Is this safe?
Code:
fastboot flash bootloader bootloader-mako-makoz10o.img
fastboot reboot-bootloader
sleep 5
fastboot flash radio radio-mako-m9615a-cefwmazm-2.0.1700.48.img
fastboot reboot-bootloader
sleep 5
fastboot -w update image-occam-jdq39.zip
I don't want to brick the phone

Guide by efrant:
D. Type in the commands into the command prompt
1) Make sure your computer recognizes your device by typing: fastboot devices
2) Unlock your bootloader (if you have not already done so): fastboot oem unlock
3) You will see a prompt on your device. This will wipe your entire device (including the /sdcard folder). Accept. Note: you use the volume keys to change the option and the power button to accept. You cannot use the touch screen.
4) Reboot by typing: fastboot reboot-bootloader
5) Flash the bootloader: fastboot flash bootloader bootloader-mako-makoz10l.img (or whatever the name of the bootloader image that you downloaded).
6) Reboot: fastboot reboot-bootloader
7) Flash the radio: fastboot flash radio radio-mako-m9615a-cefwmazm-2.0.1700.33.img (or whatever the name is of the radio image that you downloaded).
8) Reboot: fastboot reboot-bootloader
9) Flash the system partition: fastboot flash system system.img
10) Optional (NOT optional for n00bs) -- Flash the data partition: fastboot flash userdata userdata.img Note: this command will wipe your device (including /sdcard), EVEN if your bootloader is already unlocked. See note 2 below.
11) Flash the kernel/ramdisk: fastboot flash boot boot.img
12) Optional (NOT optional for n00bs) -- Flash the recovery partition: fastboot flash recovery recovery.img
13) Erase the cache partition: fastboot erase cache
14) Reboot: fastboot reboot
15) Done! The first boot will likely take quite a bit longer than you are used to, as Android builds the Dalvik cache.
Now you have a fully stock image on your device. The only thing that is different from out-of-the-box condition is that your bootloader is unlocked. See the notes section at the end of this post for information on re-locking the bootloader.
You have to unpack the system.image file as you can only flash .img files in fastboot. What`s with the sleep 5?
Good luck.

I've seen some youtube tutos that use that .sh file and it does flash the .zip with fastboot......
That's why I ask, I mean: The previous thread, which i already read before, is like a step-by-step process, when this .sh file would do it all for you!!
The sleep command gives 5 seconds of grace time for the device to reboot.....

GFXi0N said:
I've seen some youtube tutos that use that .sh file and it does flash the .zip with fastboot......
That's why I ask, I mean: The previous thread, which i already read before, is like a step-by-step process, when this .sh file would do it all for you!!
The sleep command gives 5 seconds of grace time for the device to reboot.....
Click to expand...
Click to collapse
Haven`t used that method myself, but if you think it will work go ahead

WOrst case scenario, the console woud throw me out to the command prompt and I would have to do it by hand......

[GUIDE] Transform Your hTC One to Developer edtition

I make this guide as there is no guide to change your phone to developer edition hTC One
-First of all your device must be 70% or more
-Have hTC drivers installed
-uninstall any kies or hTC sync or any thing related to them
-and ofcourse S-OFF
-Required Downloades
1-MINI SDK
Dropbox Mirror
2-ENG HBOOT
-For international hTC ONE
-For Google Play edition
-for any other hTC One edit android_info.text in the zip and change the mid and cid to your current mid and cid
3-Developer edition RUU
4- 3.22.1540.1.zip firmware
Instructions
1-copy the eng hboot.zip and the firmware.zip to the mini sdk folder
2-boot your device to bootloader
3-open cmd.exe in the mini sdk folder
4-type the command fastboot oem rebootRUU
5-type the command fastboot flash zip ENGHBOOTINternational/googleplayedition/etc zip
6-press the power button and the volume down button to boot to bootloader [untill you get grey screen]
7-type the command fastboot oem writecid BS_US001
8-type the command fastboot oem writemid PN0712000
9-type the command fastboot flash zip 3.22.1540.1.zipwhich is the firmware
10-it will ask to retry entering the command just do it
11-now reboot to bootloader power+volume down
12-then run the developer edition RUU and install it as a normal ruu
13-CONGRATULATIONS YOU MADE IT
​

Based in this?
http://htc-one.wonderhowto.com/how-...one-into-htc-one-with-sense-no-bloat-0148220/
Sent from my HTC O'ne-xus

mitchst2 said:
Based in this?
http://htc-one.wonderhowto.com/how-...one-into-htc-one-with-sense-no-bloat-0148220/
Sent from my HTC O'ne-xus
Click to expand...
Click to collapse
no it is not
[edit] I read the guide in that link and it doesn't mention anything about ENG hboot and changing the modelid of the phone
my guide makes you transform your htc one to a factory developer edition with its modelid and cid as if you bought a developer edition hTC One
also that guide in the link makes you download the developer edition ruu even if your device isn't I mean you won't go back with your stock sense rom [if you have international or carrier htc one] by using that guide

Flashable stock rom

I need the flashable stock rom for 2.21.40.30. Can someone give me the link

All the ROM downloads can be found here: https://www.asus.com/support/Download/39/1/0/2/96nqlxHp1VKV4Rdz/32/
Firmware you want:
WW SKU (recommended)
TW SKU
CN SKU
CHT SKU
It's always recommended to after downloading the ZIP (on any stock version), reboot to droidboot then:
Guide for Zenfone 5 (T00J - A501CG, T00F - A500CG) only!
From inside the ZIP, extract the files fastboot.img (note that sometimes fastboot.img comes as droidboot.img), recovery.img and ifwi.zip
From ifwi.zip extract the files dnx_fwr_ctp_a500cg.bin and ifwi_ctp_a500cg.bin
Now, flash the files in the following order (via droidboot):
NOTE: The first line below, the fastboot.img I mention is of 2.21.40.30, use this fastboot image to flash a dnx and a ifwi. Other ones may not work! As you using this version, I'm not sending you it separately
Code:
fastboot flash fastboot fastboot.img
fastboot reboot-bootloader
fastboot flash dnx dnx_fwr_ctp_a500cg.bin
fastboot flash ifwi ifwi_ctp_a500cg.bin
fastboot flash fastboot fastboot.img
fastboot flash recovery recovery.img
fastboot reboot-bootloader
It's also ULTRA recommended that you erase your data and cache:
Code:
fastboot erase data
fastboot erase userdata
fastboot erase cache
Now flash the ROM via adb sideload on recovery
I recommend doing this before flashing any stock ROM when coming from a custom ROM.
Thanks

No I meant flashable from TWRP recovery. I learned that method by heart

In cmd typing "adb devices" shows empty list.
all drivers are already installed.
my phone is not shown in 'adb usb" also.
help me

Sending back to Huawei UK for battery replacement, need to put back to stock?

My phone is now turning off at 30% so I'm sending it in under warranty to Huawei. Has anyone else done this? Did you put your phone back to stock?

Yes I did in November. Wouldn't boot the nougat rom and just hung on the Google screen. Tried absolutely everything via ADB twrp and sdk windows and Mac. No joy. So I relocked the bootloader then flashed the stock MM rom. Still no joy and basically screwed as stuck in the Google screen. I rang Huawei UK and they authorised a RTM repair. They changed the motherboard and the same phone came back with a new imei letter and sticker. It's been fine since and happily running Pure Nexus 7.1.2 with Franco and magisk. :laugh:

I sent mine for repair and I'm in the UK. Although I did it through my carrier (EE) not Huawei. You really want to put everything back to stock, you don't want any reason for them to deny you warranty or anything. Flash the latest images from the Google nexus page then relock the bootloader. That should be all you need to do, I've sent mine back twice and did that. They knew anything.

Followed Step 10 in Heisenbergs post
https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
But its been on the spinning Google logo for about 20 minutes now...

Exact steps I carried out:
1. Go to Settings/Backup & Reset and perform a factory data reset.
2. Download the appropriate factory images (7.1.2 (N2G47O, May 2017))
3. Unzip the angler-xxxxxx-factory-xxxxxxxx C:\angler\)
4. Move the following files to a new directory named C:\angler\images\
-bootloader-angler-angler-03.68.img
-radio-angler-angler-03.81.img
5. Within C:\angler\angler-xxxxxx\ you'll see another zip archive named image-angler-xxxxxx, unzip the contents of that zip into the C:\angler\images\ folder we created before. Now within C:\angler\images\ you should have the following files:
-boot.img
-bootloader-angler-angler-03.68.img
-radio-angler-angler-03.81.img
-recovery.img
-system.img
-userdata.img
-vendor.img
6.Boot into the bootloader and connect your phone to your PC via usb cable,enter these commands to flash:
fastboot flash bootloader C:\angler\images\bootloader-angler-angler-03.68.img
fastboot reboot-bootloader
fastboot flash radio C:\angler\images\radio-angler-angler-03.81.img
fastboot reboot-bootloader
fastboot flash boot C:\angler\images\boot.img
fastboot erase cache
fastboot flash recovery C:\angler\images\recovery.img
fastboot flash system C:\angler\images\system.img
fastboot flash vendor C:\angler\images\vendor.img
7. Then I rebooted.
Could it be because I 'fastboot erase cache'?

vinokirk said:
Exact steps I carried out:
1. Go to Settings/Backup & Reset and perform a factory data reset.
2. Download the appropriate factory images (7.1.2 (N2G47O, May 2017))
3. Unzip the angler-xxxxxx-factory-xxxxxxxx C:\angler\)
4. Move the following files to a new directory named C:\angler\images\
-bootloader-angler-angler-03.68.img
-radio-angler-angler-03.81.img
5. Within C:\angler\angler-xxxxxx\ you'll see another zip archive named image-angler-xxxxxx, unzip the contents of that zip into the C:\angler\images\ folder we created before. Now within C:\angler\images\ you should have the following files:
-boot.img
-bootloader-angler-angler-03.68.img
-radio-angler-angler-03.81.img
-recovery.img
-system.img
-userdata.img
-vendor.img
6.Boot into the bootloader and connect your phone to your PC via usb cable,enter these commands to flash:
fastboot flash bootloader C:\angler\images\bootloader-angler-angler-03.68.img
fastboot reboot-bootloader
fastboot flash radio C:\angler\images\radio-angler-angler-03.81.img
fastboot reboot-bootloader
fastboot flash boot C:\angler\images\boot.img
fastboot erase cache
fastboot flash recovery C:\angler\images\recovery.img
fastboot flash system C:\angler\images\system.img
fastboot flash vendor C:\angler\images\vendor.img
7. Then I rebooted.
Could it be because I 'fastboot erase cache'?
Click to expand...
Click to collapse
I doubt that would be the issue. Give it a bit more time, these things often take a while to boot first time. You dont't have to extract everything and do the individual commands though. After the first unzip there is a flash-all.bat (assuming you're on windows), just run that with adb/fastboot files added to that directory

fixed bricked device after installation miui 11 error antirolback

Hello how to fixed step by step
First you need fastboot rom extract fastboot rom on your pc after extract find 3 file
1-boot
2-recovery
3-system
Flash with fastboot
Turn off your phone and going to fastboot
Type
Fastboot devices
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
Done device can't boot but you can install twrp China version link ?
https://www.lanzous.com/i6ahykh
after installation you can go to twrp
Download fastboot miui 10 install from twrp
Sorry for me English