As you probably all know, the Advanced Hack Kit (a.k.a Hack Kit) has been retired for good yesterday. Does that mean that you can not achive root privilege anymore? NO
NO, YOU DON'T NEED S-OFF TO FLASH ROMS....
Getting root acces
Unlock your bootloader with HTCDEV or using this tool: http://forum.xda-developers.com/showthread.php?t=2133336
Then flash CWM or 4ext recovery in fastboot per this guide: http://forum.xda-developers.com/showpost.php?p=30020025&postcount=7 and make a nand backup.
Then reboot into recovery and flash SU or SuperSU.
Reboot the device and voilá. You are done
IF YOUR BUILD VERSION IS NOT SUPPORTED TO UPDATE THEN:
Create a goldcard using this tool: http://forum.xda-developers.com/showthread.php?t=970157 (you need a working phone for this)
Find a RUU which main version is supported and higher than yours and flash it in the PD98IMG.zip way, that is what is the goldcard for.
Re run the tool and you will be able to update the hboot and unlock it
The other way to achive root access is to flash a custom rom after unlocking the bootloader.
As you can notice root access is easy to be gained but not S-OFF. If you are skilled in android and working with terminal or cmd commands, then you can use this: http://tau.shadowchild.nl/attn1/?p=411
Flashing roms with an unlocked bootloader
Unlock your bootloader and flash a custom recovery (CWM or 4ext)
Download the rom zip file you are willing to flash to your PC.
Extract the the boot.img from inside the zip file (do not extract the whole rom)
Put the zip file in your sdcard.
Boot into recovery and do a full wipe (wipe data/factory reset, wipe cache partition, format system)
Flash rom (install zip from sdcard)
Reboot into bootloader again and plug the phone to the PC.
You need to be in fastboot usb (if you see HBOOT USB PLUG in the phone, just press power to toggle)
Open a cmd/terminal and navigate to where the boot.img file is located.
Type: fastboot flash boot boot.img If you don´t how to do that, watch this video (it is in spanish, thou you can follow it without listening to the instructions)
Reboot and now you should be enjoying your custom rom
Rooting without the Ace kit!
Hi there
Is there a thread or some sort of a step by step manual on how to install ROM with unlocked boot loader (s on) without ace advance hacking kit or perhaps a working method where you can install CWM on a Gingerbread. (I have successfully unlocked the boot loader on htcdev)
Thanks a million
simopesh said:
Hi there
Is there a thread or some sort of a step by step manual on how to install ROM with unlocked boot loader (s on) without ace advance hacking kit or perhaps a working method where you can install CWM on a Gingerbread. (I have successfully unlocked the boot loader on htcdev)
Thanks a million
Click to expand...
Click to collapse
Check the guide in my signature, you will find the information you need in there. Don't forget to flash the boot.img of the custom rom in fastboot. Enjoy...
Not registering to mobile network!
Thanks Glevitan
I found the manual and all went smooth and easy. I have one problem though.
The phone does not register to any mobile network. Any idea how to bypass that? It was originally locked on Orange UK network.
Thanks again
glevitan said:
Check the guide in my signature, you will find the information you need in there. Don't forget to flash the boot.img of the custom rom in fastboot. Enjoy...
Click to expand...
Click to collapse
simopesh said:
Thanks Glevitan
I found the manual and all went smooth and easy. I have one problem though.
The phone does not register to any mobile network. Any idea how to bypass that? It was originally locked on Orange UK network.
Thanks again
Click to expand...
Click to collapse
That is weird. What ROM did You flash?
Phone locked on Orange UK!
glevitan said:
That is weird. What ROM did You flash?
Click to expand...
Click to collapse
CM-7.2.0-ace.zip and then I tried aospX-1.0.0-MR1-DHD.zip.
I flashed it many times these two ROM's after Ace Kit without any issues. Also I noticed that every time I restart the phone it requires the network unlocking code. It is weird!
the pdf file to flash a custom rom/recovery, i dont understand.. how exactly do i flash a custom rom?? for example codefirex??
Hello,
I try to unlock my bootloader with HTCDEV or by using that tool but have some problems.
At step 8 (HTCDEV) Type in Command Prompt: fastboot oem get_identifier_token
After that you should see a long block of text. But I only get this:
<bootloader> [ERR] Command error !!!
OKAY [ 0.016s]
finished. total time: 0.016s
what's going wrong? what can I do?
Albert-Jan said:
Hello,
I try to unlock my bootloader with HTCDEV or by using that tool but have some problems.
At step 8 (HTCDEV) Type in Command Prompt: fastboot oem get_identifier_token
After that you should see a long block of text. But I only get this:
<bootloader> [ERR] Command error !!!
OKAY [ 0.016s]
finished. total time: 0.016s
what's going wrong? what can I do?
Click to expand...
Click to collapse
or your build version does not supported or you didn't update your hboot....
Boot in fastboot usb and type:
Code:
fastboot getvar all
Then paste all that info in here (delete the imei)
glevitan said:
or your build version does not supported or you didn't update your hboot....
Boot in fastboot usb and type:
Code:
fastboot getvar all
Then paste all that info in here (delete the imei)
Click to expand...
Click to collapse
Microsoft Windows [versie 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Alle rechten voorbehouden.
C:\Users\Albert-Jan>cd \Android
C:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0027
(bootloader) version-baseband: 26.14.52.27
(bootloader) version-cpld: None
(bootloader) version-microp: 0438
(bootloader) version-main: 3.12.405.2
(bootloader) serialno: HT0AERX05199
(bootloader) imei:
(bootloader) product: ace
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD9810000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 3847mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 743ca94a
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) region-id: 0
all: Done!
finished. total time: 0.031s
Albert-Jan said:
Microsoft Windows [versie 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Alle rechten voorbehouden.
C:\Users\Albert-Jan>cd \Android
C:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0027
(bootloader) version-baseband: 26.14.52.27
(bootloader) version-cpld: None
(bootloader) version-microp: 0438
(bootloader) version-main: 3.12.405.2
(bootloader) serialno: HT0AERX05199
(bootloader) imei:
(bootloader) product: ace
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD9810000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 3847mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 743ca94a
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) region-id: 0
all: Done!
finished. total time: 0.031s
Click to expand...
Click to collapse
Your build nor your hboot version support unlocking the bootloader. You can try updating the hboot manually by flashing 0029 hboot. However that is a dangerous process. Otherwise, you can create a goldcard and flash a RUU with a Main version that supports the update.
glevitan said:
Your build nor your hboot version support unlocking the bootloader. You can try updating the hboot manually by flashing 0029 hboot. However that is a dangerous process. Otherwise, you can create a goldcard and flash a RUU with a Main version that supports the update.
Click to expand...
Click to collapse
I'm not a professional.
how can I create a goldcard and flash a RUU?
is there a step by step manual somewhere?
thanks
Excellent guide.
Albert-Jan said:
I'm not a professional.
how can I create a goldcard and flash a RUU?
is there a step by step manual somewhere?
thanks
Click to expand...
Click to collapse
I would try the hboot update. It should work...There is a guide I think in the development section, not sure thou.
Does this Sim unlock the device or only gives root ?
sizzlers said:
Does this Sim unlock the device or only gives root ?
Click to expand...
Click to collapse
Only root. No sim unlock.
cannot get CWM Recovery loaded on DHD GB
glevitan said:
As you probably all know, the Advanced Hack Kit (a.k.a Hack Kit) has been retired for good yesterday. Does that mean that you can not achive root privilege anymore? NO
Getting root acces
Unlock your bootloader with HTCDEV or using this tool: http://forum.xda-developers.com/showthread.php?t=2133336
Then flash CWM or 4ext recovery in fastboot per this guide: http://forum.xda-developers.com/showpost.php?p=30020025&postcount=7 and make a nand backup.
Then reboot into recovery and flash SU or SuperSU.
Reboot the device and voilá. You are done
The other way to achive root access is to flash a custom rom after unlocking the bootloader.
As you can notice root access is easy to be gained but not S-OFF. If you are skilled in android and working with terminal or cmd commands, then you can use this: http://tau.shadowchild.nl/attn1/?p=411
Click to expand...
Click to collapse
domasxxm said:
Yes!! I did it just had to flash boot img from zm7 zip fastboot flash boot boot.img
Click to expand...
Click to collapse
Phone: DHD, 3.20.502.52, ATT
I have successfully unlocked the phone (via HTCDev)
And have successfully rooted the phone.
I installed the ROM Manager and Titanium Backup.
I have the ADB drivers successfully installed on my computer.
I also have HTC Quick Root running on my computer.
I am NOT able to get the CWM Recovery installed on the phone. I always get a " /cache/recovery..." error.
I've searched and read a number of threads that have indicated the DHD Gingerbread is particularly difficult to get ROM Manager fully working. I tried the process outlined here (http://forum.xda-developers.com/showthread.php?p=39016279), using the easyunlock tool. the script appears to run fine, i've even gone through the redundant step of putting the unlockcode received from htcdev into the tools directory and allowing the script to complete, which it appears to do fine. However, the script indicates the phone should execute some commands as a final step, at which point my phone is already sitting in the bootloader menu and does nothing.
I'm reasonably comfortable with ADB commands and the terminal emulator on the phone.
Can anyone help me understand why I'm failing and what I might do to get the CWM Recovery installed and get ROM Manager working?
My end goal is to install a more battery efficient ROM.
smericle said:
Phone: DHD, 3.20.502.52, ATT
I have successfully unlocked the phone (via HTCDev)
And have successfully rooted the phone.
I installed the ROM Manager and Titanium Backup.
I have the ADB drivers successfully installed on my computer.
I also have HTC Quick Root running on my computer.
I am NOT able to get the CWM Recovery installed on the phone. I always get a " /cache/recovery..." error.
I've searched and read a number of threads that have indicated the DHD Gingerbread is particularly difficult to get ROM Manager fully working. I tried the process outlined here (http://forum.xda-developers.com/showthread.php?p=39016279), using the easyunlock tool. the script appears to run fine, i've even gone through the redundant step of putting the unlockcode received from htcdev into the tools directory and allowing the script to complete, which it appears to do fine. However, the script indicates the phone should execute some commands as a final step, at which point my phone is already sitting in the bootloader menu and does nothing.
I'm reasonably comfortable with ADB commands and the terminal emulator on the phone.
Can anyone help me understand why I'm failing and what I might do to get the CWM Recovery installed and get ROM Manager working?
My end goal is to install a more battery efficient ROM.
Click to expand...
Click to collapse
That stament is normal and it appears always in recovery. How come flashing a custom recovery is failing?
edit: nevermind i got cwm recovery flashed
is there any way to s-off for people not advanced in android?
rooternoober said:
edit: nevermind i got cwm recovery flashed
is there any way to s-off for people not advanced in android?
Click to expand...
Click to collapse
Unfortunately no.
C:\Users\Hakan>fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_hiau_ml_tuhl
(bootloader) version: 1.0
(bootloader) imei: XXXXXXXXXX
(bootloader) version-main: 1.86.401.7
(bootloader) boot-mode: download
(bootloader) version-bootloader: 1.01.0000
(bootloader) mid: 0PK711000
(bootloader) cid: HTC__J15
all:
finished. total time: 0.003s
Telephone status S-OF & Unlocked
hello friends, I wrote phone information. phone system came update. The new update file appears as 1.90.401.3, but not tamamyal system update for the Twrp Recovery is installed. I was in the Recovery menu. According to information I'm looking for my phone for OTA update files. Thank you in advance for your friends to help you.
Hello friend, you must firstly flash stock recovery to OTA. On the top of that, you should have an unmodified system partition.
Sent from my HTC_M9pw using XDA Free mobile app
yvtc75 said:
Hello friend, you must firstly flash stock recovery to OTA. On the top of that, you should have an unmodified system partition.
Sent from my HTC_M9pw using XDA Free mobile app
Click to expand...
Click to collapse
thank you. I'm a bit novice in these matters. can you help me on stock recovery ? I share my phone 's information . You can write me just ask you this information in accordance with the appropriate link to the original recovery . My download and load . I will be very happy if you help .
Thank you I am waiting for the help
I noted your device was s-offed.
Use this RUU
http://forum.xda-developers.com/one-m9/one-m9-general/ruu-htc-one-m9-1-85-401-6-t3218717
And the flash procedure was included in the bellow post .
http://forum.xda-developers.com/showpost.php?p=61801034&postcount=8
Backup your data first and good luck!!
Sent from my HTC_M9pw using XDA Free mobile app
If you only want stock recovery for simple OTA, ask jirkab for help.
http://forum.xda-developers.com/one-m9/one-m9-general/ota-1-90-401-3-europe-wwe-m9-t3299433
yvtc75 said:
I noted your device was s-offed.
Use this RUU
http://forum.xda-developers.com/one-m9/one-m9-general/ruu-htc-one-m9-1-85-401-6-t3218717
And the flash procedure was included in the bellow post .
http://forum.xda-developers.com/showpost.php?p=61801034&postcount=8
Backup your data first and good luck!!
Sent from my HTC_M9pw using XDA Free mobile app
If you only want stock recovery for simple OTA, ask jirkab for help.
http://forum.xda-developers.com/one-m9/one-m9-general/ota-1-90-401-3-europe-wwe-m9-t3299433
Click to expand...
Click to collapse
Thank you for helping .
ota_hıau_ml_tuhl_l50_sense70_mr_htc_europe_1.90.401.3-1.86.401.7_release_464403.zip file I uploaded on my sd card. Then I upload the files from the recovery menu. However, E : I get the error Zip signatures verified . How do I resolve this error.
To resolve the errors I made my phone super- serious. but it did not happen.
Do you have any idea how to fix this error? I am still waiting for version 1.86.401.7
GoodyCruz said:
Thank you for helping .
ota_hıau_ml_tuhl_l50_sense70_mr_htc_europe_1.90.401.3-1.86.401.7_release_464403.zip file I uploaded on my sd card. Then I upload the files from the recovery menu. However, E : I get the error Zip signatures verified . How do I resolve this error.
To resolve the errors I made my phone super- serious. but it did not happen.
Do you have any idea how to fix this error? I am still waiting for version 1.86.401.7
Click to expand...
Click to collapse
these as detailed by the howtos linked by the previous post, are not flashable from custom recovery. You need stock recovery not a custom like TWRP.
Or rather be using Fastboot tool from a PC, that's the most convenient in your situation i think
Hi,
I've rooted my phone(it's also S-OFF) and tried to install ViperOneM9 4.3.0,after installation my phone restarting after HTC logo on white screen, when i try to restore my backup from TWRP (2.8.0) it returns error 255. I'm stuck on download mode I search for original rom but there are roms for M9 only,where i can download original OS for M9+.
My Device Information as below;
(bootloader) kernel: lk
(bootloader) product: htc_hiau_ml_tuhl
(bootloader) version: 1.0
(bootloader) version-main: 1.90.401.3
(bootloader) boot-mode: download
(bootloader) version-bootloader: 1.01.0000
(bootloader) mid: 0PK711000
(bootloader) cid: 11111111
Thanks in advance.
Here you go.
http://forum.xda-developers.com/one-m9/one-m9-general/rom-cleanslate-1-0-world-wide-edition-t3120017
Since you have S-OFFed your m9+, RUU is OK for you if you want original ROM.
http://forum.xda-developers.com/one-m9/one-m9-general/ruu-htc-one-m9-1-85-401-6-t3218717
why u flash M9 rom, since ur phone M9Plus??? is not same at all, that why ur stuck at booting
yvtc75 said:
Here you go.
http://forum.xda-developers.com/one-m9/one-m9-general/rom-cleanslate-1-0-world-wide-edition-t3120017
Since you have S-OFFed your m9+, RUU is OK for you if you want original ROM.
http://forum.xda-developers.com/one-m9/one-m9-general/ruu-htc-one-m9-1-85-401-6-t3218717
Click to expand...
Click to collapse
Dude i don't know how to thank you,millions of thanks not enough, you saved my day Love you man
paroys said:
why u flash M9 rom, since ur phone M9Plus??? is not same at all, that why ur stuck at booting
Click to expand...
Click to collapse
I'm a rookie about ROM things, i was using venom rom on my M9 and i thought it could work on M9+ too After flashing Venom rom it's restarting continuously after HTC logo shows up, Download Mode is the only thing working on my phone now,that's why i stuck in it but now thanks to @yvtc75 i can flash the original rom again.
yvtc75 said:
Here you go.
http://forum.xda-developers.com/one-m9/one-m9-general/rom-cleanslate-1-0-world-wide-edition-t3120017
Since you have S-OFFed your m9+, RUU is OK for you if you want original ROM.
http://forum.xda-developers.com/one-m9/one-m9-general/ruu-htc-one-m9-1-85-401-6-t3218717
Click to expand...
Click to collapse
i've flashed the rom and my phone operational again, thanks alot.
sheshman said:
i've flashed the rom and my phone operational again, thanks alot.
Click to expand...
Click to collapse
If you ever want to receive OTAs again use this guide: http://forum.xda-developers.com/one...c-one-m9-stock-backup-stock-recovery-t3190453
HTC 816w
A5_DUG
Dead Boot-Loader (9008)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Symptoms of Dead Boot-Loader
--------------------------------------------------------------
Due to corruption of the Boot-Loader by many reasons, Qualcomm devices enters mode called (Qualcomm Emergency Download Mode),
So, when you connect the device to PC, You'll see something like this in the device manager,
------------------------------------------
Download Section
------------------------------------
Here is the full mmcblk0.img backup i've made and tested myself to unbrick alot of 816W,
mmcblk0.img
-----------------------
Here is the tool we're going to use to write the img file into the SD card,
Win32DiskImager
----------------------------
Unbrick Guide
---------------------------
Summary of the process
-------------------------------------------------
We will write an backup of mmcblk0 from a working device (same as the dead one) to an SD Card (same size as the internal memory),
Then we put that SD into the phone and let it boot from the SD Card,
Then we flash the phone with it's Official Firmware,
That's it
Detailed Guide
------------------------------
1. Go to the Download section and download both (mmcblk0.img and win32diskimager),
2. Connect 8GB SD Card to PC via SD Card Reader,
3. Setup Win32DiskImager and Run it,
4. From Win32DiskImager do as this image,
5. Just let it finish, Then disconnect the SD Card,
6. Make sure the device's battery is well charged,
7. Put the SD Card into the phone,
8. Now try to boot into bootloader mode by pressing,
Vol- & Power button
9. After few seconds phone should boot into bootloader mode,
10. Now flash your phone according to your device info and case
(S-OFF, S-ON, SuperCID, BL Locked or Unlocked)
11. After flashing process finish, Your phone now is bootable working as it should be,
12. There is no 12, we're done ..
------------------------------------------------------
Final Word
---------------------
This method not only works with 816w, it should work for all Qualcomm devices, but you'll need the right mmcblk0.img backup.
I have tested this method myself with 3 phones, 2 of 'em are working fine now,
the third one powered on but it has a faulty EMMC so, it doesn't accept flashing, and here's one of the working,
----------------------------------------------------
I've been working on this for almost 3 days,
So, in case this guide was helpful for you,
Just hit "Thanks"
BEST REGARDS
----------------------------
Read mmcblk0 Guide
------------------------------------------
Here is how to read mmcblk0.img form a working phone,
1. Root the phone,
2. Install BusyBox
HTC devices doesn't accept regular "busybox",
so, we have to install it via "BusyBox on Rails",
and here is the premium version,
BusyBoxOnRails
3. Put an SD Card in the phone (8 or 16GB), then enable "USB Debugging",
4. Connect phone to PC and run this commands from PC one by one,
adb shell
su
dd if=/dev/block/mmcblk0 of=/sdcard2/mmcblk0.img
5. Now reading process started and you have to wait for it to finish,
6. After process finish, you will have the "mmcblk0.img" file in your SD Card, Now just copy this file to your PC and follow the rest of the guide,
>>DONE
hey hello! thank you for this. My htc 816w UNICOM, is stuck on 4.4.4 with no update option. i tried your guide and win32 says it copies to the sd card yet HBOOT does not. when i try to go to the SD card, it says corrupted.
luisitox22 said:
hey hello! thank you for this. My htc 816w UNICOM, is stuck on 4.4.4 with no update option. i tried your guide and win32 says it copies to the sd card yet HBOOT does not. when i try to go to the SD card, it says corrupted.
Click to expand...
Click to collapse
This guide for unbrick only, if you can't update your device via OTA, this is another story, which needs another way to go through!,
For the SD card problem, just use any HDD Partition tool (ex: EaseUS) to wipe and format it,
BR
Sent from my iPhone 6 using Tapatalk.
mirosaw2 said:
This guide for unbrick only, if you can't update your device via OTA, this is another story, which needs another way to go through!,
For the SD card problem, just use any HDD Partition tool (ex: EaseUS) to wipe and format it,
BR
Sent from my iPhone 6 using Tapatalk.
Click to expand...
Click to collapse
Thanks for the reply. i was hoping this Hboot method would help me get past 4.4 since all Hboots zips i use seem to install but it stays in 4.4.
HELP ME
I DID AS YOU SAID AND UNDER THIS COMMAND dd if=/dev/block/mmcblk0 of=/sdcard2/mmcblk0.img IT SAYS CANNOT FIND SDCARD2/MMCBLKO.IMG ON SD CARD.
AND WHAT DO U MEAN BY COPY THE FILE INTO PC AND FOLLOW THE REST OF THE GUIDE.M A NOOB SO PLEASE HELP ME OUT.I WILL BE REALLY GREATFUL.THANKS
ROOTER RAMZY said:
I DID AS YOU SAID AND UNDER THIS COMMAND dd if=/dev/block/mmcblk0 of=/sdcard2/mmcblk0.img IT SAYS CANNOT FIND SDCARD2/MMCBLKO.IMG ON SD CARD.
AND WHAT DO U MEAN BY COPY THE FILE INTO PC AND FOLLOW THE REST OF THE GUIDE.M A NOOB SO PLEASE HELP ME OUT.I WILL BE REALLY GREATFUL.THANKS
Click to expand...
Click to collapse
As you can see, "sdcard2" refers to the Micro SD Card inserted in the phone,
So, if you don't have SD Card inserted in the phone, change "sdcard2" to "sdcard1" so "mmcblk0.img" backup to Internal Storage,
After that you need to copy the mmcblk0.img file to PC and follow the reset of the guide,
Best Regards
hi! Thank you for guide, my htc 816w 9008 mode, i followed your guide & now phone boot in bootloader mode with sd card but not flash your img in hboot, error: no image or wrong image! when flashing ruu mode error (status readfailed(Too many links)), using sdcard zip error "Device halted dut o large image update", i sucessfully flashed stock boot image, recovery & cwm in fastboot but nothing happen, unlock bootloader sucess. need help to retrieve my phone
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.13.3230.16.05
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.58.401.11
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA4BDWW00476
(bootloader) imei:)
(bootloader) imei2:)
(bootloader) meid: 00000000000000
(bootloader) product: a5_dug
(bootloader) platform: hTCBmsm8226
(bootloader) modelid: 0P9C70000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 622b1fa2
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
thushdt said:
hi! Thank you for guide, my htc 816w 9008 mode, i followed your guide & now phone boot in bootloader mode with sd card but not flash your img in hboot, error: no image or wrong image! when flashing ruu mode error (status readfailed(Too many links)), using sdcard zip error "Device halted dut o large image update", i sucessfully flashed stock boot image, recovery & cwm in fastboot but nothing happen, unlock bootloader sucess. need help to retrieve my phone
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.13.3230.16.05
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.58.401.11
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA4BDWW00476
(bootloader) imei:)
(bootloader) imei2:)
(bootloader) meid: 00000000000000
(bootloader) product: a5_dug
(bootloader) platform: hTCBmsm8226
(bootloader) modelid: 0P9C70000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 622b1fa2
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Let's try something that may work,
According to your getvar output, your main ver is 1.58 which is KK(4.4.2),
Your cid is "J15" which is "Europe",
So, Just download this zip firmware, HERE
Now download and extract the attached file in the same folder where you downloaded the firmware,
Relock your bootloader using this command:
Code:
fastboot oem lock
Now put your phone again in Fastboot mode,
Shift + Right click >> Open command window here .. from the folder which contains "htc_fastboot.exe and firmware",
Now type this commands one by one:
Code:
htc_fastboot.exe oem rebootRUU
Code:
htc_fastboot.exe flash zip [name of firmware]
Now just sit back and wait until flashing process completed,
Hope that works for you, as it's worked for me,
Best Regards
Hello I Need A5_DWGL Deadbrick File
And Posible to Write A5_Dug File Write To A5_dwgl
mirosaw2 said:
Let's try something that may work,
According to your getvar output, your main ver is 1.58 which is KK(4.4.2),
Your cid is "J15" which is "Europe",
So, Just download this zip firmware, HERE
Now download and extract the attached file in the same folder where you downloaded the firmware,
Relock your bootloader using this command:
Code:
fastboot oem lock
Now put your phone again in Fastboot mode,
Shift + Right click >> Open command window here .. from the folder which contains "htc_fastboot.exe and firmware",
Now type this commands one by one:
Code:
htc_fastboot.exe oem rebootRUU
Code:
htc_fastboot.exe flash zip [name of firmware]
Now just sit back and wait until flashing process completed,
Hope that works for you, as it's worked for me,
Best Regards
Click to expand...
Click to collapse
look i do as you say but it give me that
C:\adb>htc_fastboot.exe oem rebootRUU
... (bootloader) Error: Command never completed
(bootloader) Error: Command timeout error
(bootloader) Error: Command completed with errors
(bootloader) Failed Reading block @ 524288
(bootloader) [SD_ERR] sd_read_sector: read sector failed (524288 256)
(bootloader) [ERR] partition_read_emmc(589): error -1
(bootloader) Start Verify: 0
(bootloader) Error: Command never completed
(bootloader) Error: Command timeout error
(bootloader) Error: Command completed with errors
(bootloader) Failed Writing block @ 524288
(bootloader) [SD_ERR] sd_write_sector: write sector failed (524288 256)
OKAY
Problem
The phone got into Qualcomm emergency mode after the phone's battery ran out of power
Does the phone charges in Qualcomm emergency mode or not ? ( Because i did as you described and nothing happens )
And if not how can i charge it ?
moamenmma said:
The phone got into Qualcomm emergency mode after the phone's battery ran out of power
Does the phone charges in Qualcomm emergency mode or not ? ( Because i did as you described and nothing happens )
And if not how can i charge it ?
Click to expand...
Click to collapse
No, battery won't charge in that mode,
You may charge it using external power supply or desktop charger,
But you'll have to remove the back cover of the phone in order to remove the battery.
Sent from my iPhone using Tapatalk
mirosaw2 said:
No, battery won't charge in that mode,
You may charge it using external power supply or desktop charger,
But you'll have to remove the back cover of the phone in order to remove the battery.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
So , how can i charge it ?
Can you give me tutorial ?
moamenmma said:
So , how can i charge it ?
Can you give me tutorial ?
Click to expand...
Click to collapse
Here is a tutorial for how to disassemble the phone,
https://m.youtube.com/watch?v=JLjjH-Dlzuo
Follow that to know how to remove the battery,
Charge it, then reverse the guide to put it back,
After that follow my guide to get your phone back to life again.
Sent from my iPhone using Tapatalk
mirosaw2 said:
Here is a tutorial for how to disassemble the phone,
https://m.youtube.com/watch?v=JLjjH-Dlzuo
Follow that to know how to remove the battery,
Charge it, then reverse the guide to put it back,
After that follow my guide to get your phone back to life again.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Oh thanks , i will try it
But after disassembling it how can i charge the battery externally ?
moamenmma said:
Oh thanks , i will try it
Click to expand...
Click to collapse
For charging, you can use any desktop charger,
But you have to be careful when you connect it to the desktop charger, as the battery's wires is very thin and can be easily damaged,
You'll need to connect two points, the positive(+) and the ground(-),
HTC 816's battery has two red wires which is the positive(+), and there is another two black wires which is the ground(-) points,
Check this photo,
http://cdn02.shopclues.net/images/detailed/37306/Bop9C100battery1_1463137872.jpg
Sent from my iPhone using Tapatalk
mirosaw2 said:
For charging, you can use any desktop charger,
But you have to be careful when you connect it to the desktop charger, as the battery's wires is very thin and can be easily damaged,
You'll need to connect two points, the positive(+) and the ground(-),
HTC 816's battery has two red wires which is the positive(+), and there is another two black wires which is the ground(-) points,
Check this photo,
http://cdn02.shopclues.net/images/detailed/37306/Bop9C100battery1_1463137872.jpg
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I charged the battery and your tutorial worked
But when i power down the phone it opens in the first time it boots normally but in the second time it needs to flash the mmcblk.img again to boot tge phone again
Where's the problem ?
How long time does it take flash phone?
my phone 2 hours just knocks flashing!!
sa-techno said:
How long time does it take flash phone?
my phone 2 hours just knocks flashing!!
Click to expand...
Click to collapse
It doesn't take that long,
Start the process over and make sure you're using a good cable, and good luck.
Sent from my iPhone using Tapatalk