Hello ,
My 1st Thread so , sorry for any mistakes !
I had ZUK Z1 with ZUI OS and I was trying to flash Cyanogen OS in fastboot mode which is most usual way but whatever program I was trying , it didn't recognize the device .
I did installed a lot of drivers , ZUK drivers , Google, Samsung , ADB etc , but had the same results . Of course I enabled all the features, Android Debugging , OEM Unlock etc .
So I tried to ROOT it .
I used King Root for Windows , it started the Root process but when finished it gave negative results , so No Root .
I am not a Developer , just a user who search for solutions .
Now , when I was trying to Root the phone with King Root , the process starts from ''00%'' in a circle and when it goes to ''50-51%'' , the program Reboot the Phone and it automatically installs and OPEN the TWRP Recovery (2.8.7.0) and after some seconds (about 5-10 sec ), it reboot the phone from TWRP Recovery in OS again , with message that it didn't Root the phone .
I tried this several times but had the same results .
So , what I did next was , Run the King Root program again , and when the phone Reboot to TWRP Recovery , I unplugged the USB cable and I had the new TWRP Recovery which I could install the Cyanogen OS , SuperSU (2.46) .
I posted this thread and hope is useful , I will post it step by step below .
Of course I am not responsible for any warranty , damage , bricking the phone and you should continue at your own risk .
1 .
Download drivers for phone ( I used Windows 10) , some drivers here
For ZUK drivers:
http://forum.xda-developers.com/zuk-z1/help/files-zuk-z1-drivers-qpst-roms-twrp-t3221629
For ADB 1.4.3:
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
2.
Install drivers ,
Enable in Developer Options ( press fast 7 times the Build in About phone to show ) in phone the Android Debugging and in Options , Security enable ''Unknown Sources'' .
3.
Download King Root for Windows (it is all almost in Chinese but it has instructions what to press or if you find it in English the better)
http://kingroot-pc.en.uptodown.com/
and install it (PC)
4. Download Cyanogen OS from Cyanogen site :
https://cyngn.com/support (ZUK Z1 : cm-12.1-YOG4PAS60J-ham-signed-61f79ce687.zip)
and SuperSU 2.46
https://download.chainfire.eu/696/SuperSU/
5.
Copy Cyanogen OS and SuperSU in phone (not to any folder so you can find it quickly)
6.
Run King Root , Connect USB cable from phone to PC and wait a few seconds until the program finds the phone .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then Press ROOT and wait maybe several minutes UNTIL THE PROCESS REACH 50-51% ,
Then the PHONE WILL REBOOT and ENTER TWRP RECOVERY - IMMEDIATELY UNPLUG the PHONE and then VOILA !
You Can flash then the SuperSU and Cyanogen OS .
NOTE : I didn't had enough time to verify if the Recovery it will remain (you can enable it from the settings fix permissions) once you install the cyanogen os or if it will change to ZUK recovery or Cyanogen Recovery.
The End
-------------------
05/04/2016 - ROOT ZUK Z1 VERY EASY .
I found another way to ROOT the device .... it doesn't need computer at all ... just the KING ROOT APK .
Follow this link , Download the latest KING ROOT v 4.8.5 to your phone or copy the apk from PC to phone .
http://www.appsandroidapk.com/tools/kingroot/
Once you download this APK , install it , RUN , scroll down to the button which says ''TRY IT"" for purify system and press it .
After a few seconds , it will show a message , Root access unavailable and below a button ''Try to ROOT'' , press it and after a few seconds or minute and you will have ROOT on your ZUK Z1 .
OK ... NOW ... After the ROOT , of course you can't keep ZUI OS and you want Cyanogen OS ..... BUT ... You must install another RECOVERY from the ZUK Recovery .... Download from playstore apps like FLASHIFY (Christian Göllner ) , TWRP MANAGER ( Jmz Software ) etc .. which are GREAT APPS ... and install DIRECTLY from the app the recovery you want ....
--------------
05/04/2016 - When you install Cyanogen OS the Fastboot will work fine .... you can follow than the fastboot install if you want with : Great CREDITS GOES TO : MAURONOFRIO !!! , The Link is
http://forum.xda-developers.com/zuk-z1/orig-development/tool-toolzukz1eng0-0-3-mauronofrio-t3332563
Thank You XDA DEVELPERS for giving this great site !!!!
also Thank You Cyanogen , Chainfire , TeamWin, KingRoot and all developers !!!!
Thanks for this guide.It seems easy enough.Hope it will help anyone with the same problem with the adb and fastboot.
Mine didn't reboot. I am locked to ZUI I really want to go back to stock CM. I installed all the USB drivers, adb and fastboot and yet everytime I got "device not found" any help!
http://forum.xda-developers.com/showthread.php?p=66203345
Please help me, with kingo not work the root
Life is beautiful
effizio said:
http://forum.xda-developers.com/showthread.php?p=66203345
Please help me, with kingo not work the root
Life is beautiful
Click to expand...
Click to collapse
Hello ,
I just updated the Thread , you will find the link to download the APK file .
Thanks
zmalach said:
Mine didn't reboot. I am locked to ZUI I really want to go back to stock CM. I installed all the USB drivers, adb and fastboot and yet everytime I got "device not found" any help!
Click to expand...
Click to collapse
Hi ,
I updated the Thread , download the King Root APK ( new) and ROOT easily the phone , follow the directions ,
Thanks
got "root failed"
zmalach said:
got "root failed"
Click to expand...
Click to collapse
Did you try with the new Kingo Root apk ?
zmalach said:
Mine didn't reboot. I am locked to ZUI I really want to go back to stock CM. I installed all the USB drivers, adb and fastboot and yet everytime I got "device not found" any help!
Click to expand...
Click to collapse
maybe you can try to flash zui 1.6.320 dev version with qfil. it comes with twrp 3.0.0.0 and then flash super su
Sent from my ZUK Z1 using XDA-Developers mobile app
---------- Post added at 11:58 PM ---------- Previous post was at 11:51 PM ----------
here is the link for zui 1.6.320 dev with twrp
https://cloud.mail.ru/public/81rw/dQbWdsBLf/Z1_CN_OPEN_USER_Q4430.1_M_ZUI_1.6.320_DEV.zip
Sent from my ZUK Z1 using XDA-Developers mobile app
Don't with mine, blocked by safe centre
Life is beautiful
t.h.i said:
maybe you can try to flash zui 1.6.320 dev version with qfil. it comes with twrp 3.0.0.0 and then flash super su
Sent from my ZUK Z1 using XDA-Developers mobile app
---------- Post added at 11:58 PM ---------- Previous post was at 11:51 PM ----------
here is the link for zui 1.6.320 dev with twrp
https://cloud.mail.ru/public/81rw/dQbWdsBLf/Z1_CN_OPEN_USER_Q4430.1_M_ZUI_1.6.320_DEV.zip
Sent from my ZUK Z1 using XDA-Developers mobile app
Click to expand...
Click to collapse
I will definitely try this one. How to flash it using QFIL? I mean the same way as when convert from stock CM12.1 to ZUI?
Can QFIL be used to flash stock CM12.1 back?
---------- Post added at 05:03 AM ---------- Previous post was at 05:00 AM ----------
platontw said:
Did you try with the new Kingo Root apk ?
Click to expand...
Click to collapse
Yes with the new app
serch in this forum how ti flash zui os with qfil
Sent from my ZUK Z1 using XDA-Developers mobile app
platontw said:
Hello ,
I just updated the Thread , you will find the link to download the APK file .
Thanks
Click to expand...
Click to collapse
Don't work this apk. The exploit is blocked by the safe antivirus about the zuk 6.0.1
Life is beautiful
t.h.i said:
serch in this forum how ti flash zui os with qfil
Sent from my ZUK Z1 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks, solved!!!
Life is beautiful
am on ZUI 2.3 and as I checked my recovery, its has chinese and english to select, so I presume its stock ZUI recovery.
plan to change ROM, any suggestion?
I am thinking using these step, pls correct me if am wrong in any,
1. root using Kingroot.apk
2. install TWRP manager.apk to have TWRP recovery
3. then flash whichever custom rom.
am I correct? or I need to unlock bootloader too? how do I do it or to check if its unlocked or not?
many thanks in advance,
DON2003 said:
am on ZUI 2.3 and as I checked my recovery, its has chinese and english to select, so I presume its stock ZUI recovery.
plan to change ROM, any suggestion?
I am thinking using these step, pls correct me if am wrong in any,
1. root using Kingroot.apk
2. install TWRP manager.apk to have TWRP recovery
3. then flash whichever custom rom.
am I correct? or I need to unlock bootloader too? how do I do it or to check if its unlocked or not?
many thanks in advance,
Click to expand...
Click to collapse
You might find this useful
https://forum.xda-developers.com/zuk-z1/general/qpst-method-how-to-unbrick-to-stock-t3506833
Related
Hi everyone,
Roll Back from 513 to 331 all credit for @chudy_85 check the link here
http://forum.xda-developers.com/showpost.php?p=65371195&postcount=207
this is the absolute way to roll back from Marshmallow B511 to any previous version whatever it's a lollipop or kitkat.......
(As usual the risk is on your responsibility)
New edit
Working now on MT7-L09
Thx to pasquyx and Shadow_recruit for testing it on MT7-L09
you should have root on the device
Files you may need:
1- Roll back file (this is the trick)- BOTH MODEL
DRIVE
LINK
UPLOADED
LINK
MEGA
LINK
2- rom B326 for middle east
(MT7-TL10)
LINK
(MT7-L09)
LINK
3- oeminfo file for China (don't worry it will not change the iemi numbers)
LINK
3- FX FILE EXPLORER
https://play.google.com/store/apps/details?id=nextapp.fx
4- FX ROOT ADD
https://play.google.com/store/apps/details?id=nextapp.fx.rr
5- Build.prop file if you device model showing Jazz
(MT7-TL10)
https://mega.nz/#!20QXmKrZ!HYhN_7u0sBc445C_6r6D4ug2HuqdCgM_721ANosUa9g
(MT7-L09) *NEED TO TEST FROM ANY ONE TO CONFIRM IF IT WORKING
https://mega.nz/#!XhxR2BpD!O6xkfX8MR55imidxwNlH9p3r2ugLOYwnM-dheTOQT38
-extract the file what you donloaded for oeminfo on ext sdcard
-open fx file explorer and grant it from SU, go to system root and make sure you mount read-write
-copy oeminfo from the extsdcard to /dev/block/platform/hi_mci0/by name and agree for overwrite, after that select the file and choose security and mark for all "read-write-exec"
-copy custom.bin for extsd to /data then choose security and mark for all "read-write-exec"
-check the country info now by *#*#2846579## if it cn, so you are on the right way
-now make a restart but first you should be on official recovery, if you are not turn off the phone open it again on bootloader and flash the official recovery ten restart
-after restart it should make "optimizing"
-after it finish take the roll back and put it in dload on the extsd
-make a local update ( if you don't have it go to dial and type *#*#2846579#*#* and choose 4)
after you make a local update the roll back should complete 100% because this file is the only roll back that compitable with B511
I promise you it will success with 100%
then put lollipop rom 326 on dload and make local update
and again I promise you it will success with 100%
-if the device didn't open after 10 mins, flash all files for the 326 by fastboot
Boot
Cache
Recovery
Cust
System
Userdata
-now you have a 326 rom but chines version.
-make root again and replace oeminfo and custom.bin for middle east version here then make a restart
LINK
final step is to make a reset from settings
Plz M.bleu amber i am asking if we need to unlock bootloader to apply your methode
Prof1977 said:
Plz M.bleu amber i am asking if we need to unlock bootloader to apply your methode
Click to expand...
Click to collapse
Yes, you should have an unlocked bootloader
Sent from my Nexus 5X using Tapatalk
Can you help me ihave trying but no result when i try they tell me that i have t wait 14 day
Prof1977 said:
Can you help me ihave trying but no result when i try they tell me that i have t wait 14 day
Click to expand...
Click to collapse
yes for sure , send to me your mobile details,
device model
iemi 1
S/N
product id
Huawei mt7 l10
Imei:865164220774779
S/n3F0214A23000186
Product id 09502424
---------- Post added at 12:44 AM ---------- Previous post was at 12:43 AM ----------
Prof1977 said:
Huawei mt7 l10
Imei:865164020774772
S/n3F0214A23000186
Product id 09502424
---------- Post added at 12:44 AM ---------- Previous post was at 12:43 AM ----------
Click to expand...
Click to collapse
suspended sorry
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ok tkinks no problem
Have anyone tried this on L09?
stepi1 said:
Have anyone tried this on L09?
Click to expand...
Click to collapse
Files here only for TL10
Sent from my Nexus 5X using Tapatalk
Yes, i noticed it. Just downloaded all needed files for L09, i will try later and see what happens.
Tried on l09 but it fails in transition package. downloaded all the files from huawei finnish site. Well, i think i just wait for the complete marshmallow image.
there is something with whatsapp notification, because i don't allways get new message notifications and also usb-debug and hisuite dont work. when i enable usb-debug and connect cable, it won't rise flag about permmisions and computer keeps saying that device is unathorized.
Blue.Ember said:
Hi everyone,
this is the absolute way to roll back from Marshmallow B511 to any previous version whatever it's a lollipop or kitkat.......
(As usual the risk is on your responsibility)
*******This Method is tested only on MT7-TL10 (Please don't try the files on this thread on different model number ********
Files you may need:
1- Roll back from lollipop to Kitkat (this is the trick)
DRIVE
LINK
UPLOADED
LINK
MEGA
LINK
2- for me i tired with kitkat rom B119 sp03
LINK
3- extract all file from B119 Sp03 and be ready to flash all of them via (fastboot)
(so may unlock your bootloader and you should have all files for adb and fastboot)
*recovery
*boot
*cache
*cust
*system
*userdata
it's an easy way, no need to change the location or make any special things \\\\\
download the rollback file which I mentioned before, put it on dload on the extSdcard, and make a local update ( if local update not showing for you try a search for HwOUC.zip and flash it with Twrp recovery)
after you make a local update the roll back should complete 100% because this file is the only roll back that compitable with B511
then put what you want kitkat or lollipop rom ( for me I tried with B119sp03 kitakt and it's fail on 40%)
now enter the bootloader mode and flash all img's for the rom which you tried to flash
after finishing it opne on a stock android, so no issue try a factory reset and everything will be normal after that
Edit (important): to prevent the fail on 5% you should check the location on your device by this code
*#*#2846579#*#*
It should be hw/meafnaf (middle east version)
If it showing "file is not found" try to make a reset from settings>>backup/restore
This is important edit due to the update of B511 is for middle east.....
Click to expand...
Click to collapse
Software install failed after Local Update!
letschky said:
Software install failed after Local Update!
Click to expand...
Click to collapse
It's worked for me anyway, I try again maybe there's a problem with the file, wait for the update.
Sent from my Nexus 5X using Tapatalk
Blue.Ember said:
It's worked for me anyway, I try again maybe there's a problem with the file, wait for the update.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
Ok,Thank you,iám waiting
This is stock recovery for mt7-l09 to back from twrp to stock recovery of b326 5.1.1 in order to install MM.
You can flash stock recovery in fast boot mod if you rooted your device or installed twrp previously:
https://www.dropbox.com/s/ke7xc9ugtiz3zmj/root and stock recovery for mt7 lollipop 5.1.1-1.rar?dl=0
Sent from my JAZZ using Tapatalk
I modified the post again you can try now and it will success
help plzz!!
hello guys. how can i flash stock recovery? i downloaded the stock recovery file but i cant flash it on my phone, idont know why!!!plzz guide me hou to flash it and what program i have to use for flash it ?
i did all step that u said in post 1 , but at the last when i wnat to flash rollback i cant becuse i have TWRP and i cdont know how can i flash stock recovey for 511. plz someone guide me tanx
silentflight711 said:
hello guys. how can i flash stock recovery? i downloaded the stock recovery file but i cant flash it on my phone, idont know why!!!plzz guide me hou to flash it and what program i have to use for flash it ?
i did all step that u said in post 1 , but at the last when i wnat to flash rollback i cant becuse i have TWRP and i cdont know how can i flash stock recovey for 511. plz someone guide me tanx
Click to expand...
Click to collapse
You should go into bootloader mode and open the command window from the folder that contain the stock recovery by pressing Sift from keyboard and right bottom in the mouse and choose open command window here, then type the following
fastboot flash recovery xxx.img
Replace "xxx" with the name of the img
If it showing okay then failed
Try to unlock the bootloader again by typing
fastboot oem unlock 0000000000
Replace 00000 with your unlock code
Then try to flash again
Sent from my Nexus 5X using Tapatalk
Blue.Ember said:
You should go into bootloader mode and open the command window from the folder that contain the stock recovery by pressing Sift from keyboard and right bottom in the mouse and choose open command window here, then type the following
fastboot flash recovery xxx.img
Replace "xxx" with the name of the img
If it showing okay then failed
Try to unlock the bootloader again by typing
fastboot oem unlock 0000000000
Replace 00000 with your unlock code
Then try to flash again
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
tanx it solved and recovry stock install. but when i wnat to local update roll back it fail in 5% , and i also cheek the location and it of like this : cn !! so what shuld i do now?
UPDATE: Hi. This is just to notify everyone that I am not maintaining or replying to comments in this thread anymore.
K3 note was one of my most favorite phone of all time, and will always be, but it's way too old now. I am using and doing 'research' on other devices now.
So please pardon me for not replying to you. But you can always find help regarding issues on tons of other places!
:highfive:
Installing custom recovery on K3 Note using SP Flash Tool
(COMPLETE TUTORIAL)
NOTE:
This post helps you if you need to:
1. Fix a bricked device
2. Install custom recovery to install custom rom later
3. Make your device bricked (if you do not follow this post correctly)
You will find the necessary files related to this post in the attachments
First, get your PC ready:
Download and Install "LenovoUsbDriver_v1.1.13.exe", then Restart pc.
Download and extract "SP_Flash_Tool" zip (I used v5.1820_Win, but you may try latest versions)
Link to download : https://spflashtools.com/category/windows
Open SP Flash Tool (Double click on flash_tool.exe from inside the SP Flash Tool folder)
Go to Options > Option... > Download > Tick "DA DL All with Checksum" > Close the options box
Close SP Flash Tool
Now, the flashing part:
Download and Extract "TWRP_v3.0.0-3_for_SP_Flash_Tool.zip" *
Open SP Flash Tool, and From "Download" Tab click on "Scatter-Loading"
Browse the TWRP v3.0.0-3 folder and select the "MT6752_Android_scatter.txt" file > Ok **
Click on "Download" icon
Completely turn off your phone (BUT DO NOT REMOVE BATTERY) and connect it to PC using usb cable.
Wait till the Process completes and a "Download ok" box will appear with a green tick. Disconnect the phone from cable.
Done!
Now press and hold VolumeUp+VolumeDown+PowerButton all three buttons at one untill you see the "TWRP" logo.
The phone will boot into custom recovery you just installed.
Check this screenshot for illustrated steps:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
* The provided folder has TWRP v3.0.0-3 recovery in it
To flash other custom recoveries (Like CWM, or other TWRP versions), follow this:
i. Rename your recovery image file to "recovery.img"
ii. Replace the "recovery.img" file inside the folder from TWRP_v3.0.0-3_for_SP_Flash_Tool.zip with your "recovery.img"
iii. Continue from Step 7
** You can also flash ROW/CUSTOM roms (which are made ready for SP FLASH TOOL) using this method. For that, Just select the scatter file inside the ROM folder (IN STEP 8)
*** REMEMBER If you have a MARSHMALLOW (Android OS 6.0) rom: Marshmallow roms need to be flashed with patched boot image for custom recoveries. Go to the index thread of k50 note for the patched boot images.
And by the way, there's a thanks button below if you find this post helpful! :highfive:
Anyone tried this out?
Anyone....? @stone_henge are the drivers Windows 10 x64 compatible?
bigb0bby said:
Anyone tried this out?
Click to expand...
Click to collapse
Almost everyone who regularly flashes various roms frequently is familiar to this method i suppose.
bigb0bby said:
Anyone....? @stone_henge are the drivers Windows 10 x64 compatible?
Click to expand...
Click to collapse
Please run a check for us.
stone_henge said:
Almost everyone who regularly flashes various roms frequently is familiar to this method i suppose.
Please run a check for us.
Click to expand...
Click to collapse
bigb0bby said:
Anyone....? @stone_henge are the drivers Windows 10 x64 compatible?
Click to expand...
Click to collapse
Windows 10 x64 compatible
If I flash TWRP in this way, am I going to destroy ROM that is currently installed?
Since, I am not born with knowledge of flashing custom recoveries/ROMs, is anyone willing to answer?
drakula1000 said:
If I flash TWRP in this way, am I going to destroy ROM that is currently installed?
Click to expand...
Click to collapse
No, it won't be destroyed.
drakula1000 said:
Since, I am not born with knowledge of flashing custom recoveries/ROMs, is anyone willing to answer?
Click to expand...
Click to collapse
Sorry for being late.
Thanks anyway! I took a risk and flashed it. Luckilly, ROM is untouched.
Sorry for beeing cynical.
I am new in this, trying to learn something.
Hi!! Yesterday I received my lenovo k3 note. I bought it from TinyDeal and i saw that the chinese rom is installed so I can't update my phone to the new version. Can someone please tell me how to flash the row rom for Greece?? And if anyone knows if the row rom is multilingual?? Thank you all for your time!
Need to clear up my mind...
Can we take nandroid backup of a STOCK Firmware???
Im asking cause i have learnt from my old galaxy fit that we can't backup stock one...
Sent from my Lenovo K50a40 using XDA-Developers mobile app
Grigoris0r20r said:
Hi!! Yesterday I received my lenovo k3 note. I bought it from TinyDeal and i saw that the chinese rom is installed so I can't update my phone to the new version. Can someone please tell me how to flash the row rom for Greece?? And if anyone knows if the row rom is multilingual?? Thank you all for your time!
Click to expand...
Click to collapse
Please refer to these two links. There are multiple roms for k3 note. Different roms have slightly different installation processes.
INDEX Thread for K3 Note
Needrom page for K3 note
Rockstar.garvit said:
Need to clear up my mind...
Can we take nandroid backup of a STOCK Firmware???
Im asking cause i have learnt from my old galaxy fit that we can't backup stock one...
Click to expand...
Click to collapse
You can backup any rom you want.
PS> sorry for late reply. I have a lot going on so can't visit here often.
My K3 Note does not boot anymore
Hello,
I installed TWRP then did a Backup (Boot, Data, Systel, Nvram).
Then I choose Reboot System, installed Root.
And the phone does not boot !
What can I do ?
Thank you.
working great with Windows 10 x64
Can I flash the twrp from flashify directly or do I need PC? Thx.
ChrisDG said:
Hello,
I installed TWRP then did a Backup (Boot, Data, Systel, Nvram).
Then I choose Reboot System, installed Root.
And the phone does not boot !
What can I do ?
Thank you.
Click to expand...
Click to collapse
You probably has a marshmallow rom. Marshmallow roms need to flash patched boot image for custom recoveries. Go to the index thread of k50 note for the patched boot images.
----------------------------------------------------------------------------------------------------
Blablablaaah said:
Can I flash the twrp from flashify directly or do I need PC? Thx.
Click to expand...
Click to collapse
If you are rooted, you can do that. Without root this tutorial is the only way.
Only works for me when USB is plugged while holding volume up, else SP flashtool won't start and not responding.
I'm on ROW S327 at the moment. Will this method work for me? Thank you!
stone_henge said:
You probably has a marshmallow rom. Marshmallow roms need to flash patched boot image for custom recoveries. Go to the index thread of k50 note for the patched boot images.
----------------------------------------------------------------------------------------------------
.
Click to expand...
Click to collapse
I want to install twrp with stock marshmallow firmware so do i need to do this too ?
---------- Post added at 12:14 AM ---------- Previous post was at 12:11 AM ----------
Do i need to unlock bootloader before flashing recovery? If so,
How to unlock bootloader (marshmallow stock firmware).
Dear all,
I have done these steps but my lenovo doesn't turn on. It only shows the welcome page of Lenovo. Please, could you help me?
best regards
Alright.
I had this problem for a while and I figured out how to flash the update without the need to factory reset or change the update script of the update file.
Even if you get the user/release-keys error message. EXAMPLE:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You have to be using the latest lollipop release before updating. That means you have to be on YOG7DAS2K1 before attempting.
This worked out for me. But it might not work for you. I do not believe it can destroy your phone and switch some satellites off, but still, not responsible if it did so.
Requirments:
You have to have TWRP now or you at least have ROOT and any flashing app like flashify.
Download COS 13 update file. here https://www.androidfilehost.com/?fid=24459283995316311
Download the latest CyanogenMod Recovery https://download.cyanogenmod.org/?device=bacon
Download the cm-12.1-YOG7DAS2K1 full ROM [url]https://www.androidfilehost.com/?fid=24369303960686198[/URL]
Guide:
Make sure the update cyanogen recovery option is checked in developer options.
Flash CyanogenMod Recovery downloaded before.
Reboot into it.
Use the update function in CyanogenMod Recovery and choose cm-12.1-YOG7DAS2K1 as the update file. It might take a while.
Now reboot to your phone. When booted and running, reboot to recovery.
Now you are running COS recovery. Update with the incremental.
That is it.
I hope this works out for you.
EXTRA: How to ROOT and have TWRP as a recovery:
Requirements:
A laptop.
Download TWRP and adb drivers on the laptop and the SuperSU and TWRP on your phone
Download Oneplus One TWRP Recovery [url]https://dl.twrp.me/bacon/twrp-3.0.2-0-bacon.img.html[/URL]
Get any adb divers. This one suffice [url]http://forum.xda-developers.com/google-nexus-5/development/adb-fb-apx-driver-universal-naked-t2513339[/URL]
Download the latest SuperSu [url]https://download.chainfire.eu/921/SuperSU/UPDATE-SuperSU-v2.65-20151226141550.zip[/URL]
Guide:
Reboot into bootloader: you can do this in many ways. A simple google search will show you how. Easiest way is to turn the phone off and hold the volume up and power long enough for the phone to boot into bootloader.
Connect your phone to your laptop
Run the adb: I assume you are using windows of course. First put the TWRP .img file in this folder. Hold shift and right click in the folder downloaded above. A 'Open command window here' option will be there. Click it and write in the window
Code:
fastboot boot twrp-3.0.2-0-bacon.img
. A hint: you can just write twrp and hit TAB, it will complete the filename. Or you can rename the downloaded file to just twrp.img
Check your phone, you will be running TWRP temporarily. You now have the option to ROOT only by flashing the SuperSU file downloaded on your phone. If you reboot now you will lose TWRP and get back to the official COS Recovery. If you want TWRP for good flash the TWRP file downloaded on your phone before.
I hope this is easy. It actually is. just follow it step by step.
If you could provide us the guide to root and come back to twrp I would be extremely happy
bisio971 said:
If you could provide us the guide to root and come back to twrp I would be extremely happy
Click to expand...
Click to collapse
fastboot flash latest twrp and flash SuperSU BETA
THANK the post if I deserve
bisio971 said:
If you could provide us the guide to root and come back to twrp I would be extremely happy
Click to expand...
Click to collapse
if you need a guide to root, this means you are not rooted, and if you are not rooted most probably you already have stock recovery, which means you can just install the OTA update without any issues.
bisio971 said:
If you could provide us the guide to root and come back to twrp I would be extremely happy
Click to expand...
Click to collapse
Added as requested. I hope you find it easy.
y2kkingboy said:
Added as requested. I hope you find it easy.
Click to expand...
Click to collapse
Thank you, you made my life easier, but when I tried to run the twrp through fastboot I got an error and I got the solution writing "fastboot boot twrp.img" (after renaming the file).
bisio971 said:
Thank you, you made my life easier, but when I tried to run the twrp through fastboot I got an error and I got the solution writing "fastboot boot twrp.img" (after renaming the file).
Click to expand...
Click to collapse
Yeah. I mad a mistake there. Thank you and glad it helped.
If I do this what happens to my data?? I'm on cm 12. 1.1, rooted & running twrp.
---------- Post added at 12:20 AM ---------- Previous post was at 12:18 AM ----------
Link for cos13 that works with this method?
thinleytsering9 said:
If I do this what happens to my data?? I'm on cm 12. 1.1, rooted & running twrp.
---------- Post added at 12:20 AM ---------- Previous post was at 12:18 AM ----------
Link for cos13 that works with this method?
Click to expand...
Click to collapse
As I stated before you have to be on COS 12.1 YOG7DAS2K1. This method should not format your phone or remove any data as there is no factory reset step.
As for the link they are all over the place now. I used the official one. I'll link it for your convenience.
can anyone please pull the stock recovery from COS 13, not 12. I kinda screwed up while updating and now stuck in bootloop.
Update: The issue is resolved. The issue was because of SuperSu 2.46. Installing the latest TWRP and SuperSu 2.66 fixed it. Marshmallow is now rooted!
Thank you very much! After going back to stock and still not receiving the update for more than a week (well at least it felt like a week, Lol) I decided to flash a full COS 13 zip floating around. Instantly liked the new ROM but it had root/symlink issues only to be resolved when flashing a custom kernel it seems. Not what I really wanted so then I stumbled onto your thread and this technique worked 100%! I was on DAS2K1 (flashed thru a custom recovery) already and had several failed attempts flashing just the incremental outright (thru stock recovery)., but by flashing DAS2K1 thru stock recovery first as you suggest then the incremental seems to do the trick.
I did it all the steps, but my phone doesn't not start. After optimizing aplications I have bootloop at "cyanogen modready".
L.E. I think the problem was one of old aplications. After a clean install everything works.
This is the best thing Oneplus one i ever experience.COS13 give my Oneplus one a new breathe of life .This update better than crap lolipop.No Bug for me until now,only google play service need to update twice in play store,its auto reboot itself twice and wholla,super speed UX.The best thing i ever have.I apply update from CM-12-0-YNG1TAS17L Build LRX22G using this method and it works flawlessly
I don't need to factory reset or wipe cache .
I flash full stock ROM cm-12.1-YOG7DAS2K1 and apply update through CyanogenMod Recovery only and nothing else.
Now my oneplus one is rooted and TWRP install using ADB and its fly.All rooted apps is working together with Adaway.
Thanks Cyanogen team for make this 2 years old flagship killer a beast .
Only thing not satisfied is gone signal and wifi status (connectivity indicator ).I need to swipe down to see my transfer data working (what a bummer ).
Thanks so much for this magical guide (y2kkingboy) Yours truly Oneplus one diehard fan.
I was already on cm-12.1-YOG7DAS2K1, however rooted. So even if I had been offered the OTA it would have failed.
Your guide got me updated, first time with no problems.
6.0.1 is such an improvement on 5.1.1, I tried a couple of other 6.0 roms, however this has by far been the most stable and bug free.
Cheers for the tutorial!
u can also add a trick i saw online i.e to remove lines of code from assets to - in updater file
#sychrome# said:
u can also add a trick i saw online i.e to remove lines of code from assets to - in updater file
Click to expand...
Click to collapse
Can you provide more info? i've always had trouble updating when rooted.
InsaneNutter said:
Can you provide more info? i've always had trouble updating when rooted.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2522762
u can also add a trick i saw online i.e to remove lines of code from assets to - in updater file
Click to expand...
Click to collapse
Can you provide more info? i've always had trouble updating when rooted.
Click to expand...
Click to collapse
I had tried this before and it did not work for me. Kept getting an error saying "the signature file was not a complete file" and therefore it didn't flash. But it may have been editing error on my part. This method works just fine and no need to give up your data either.
Having tried many other ways, I got it done with this instruction.
Thank you!
marxu said:
Having tried many other ways, I got it done with this instruction.
Thank you!
Click to expand...
Click to collapse
Glad I helped.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
**Intro**
Just a simple HOW TO to centralize everything I found on Russian, Italian, meizufans and xda forums.
M2 Mini has good hardware but very poor software, going to CM is a relief !
**Disclaimer**
I'm not responsible for bricked device.
You may loose warranty.
You need basic knowledge of using adb tools and rooting phones.
**Boot in Recovery and Fastboot**
Boot in recovery : power on holding Volume Up and Power
Boot in fastboot mode : power on holding Volume Down and Power
**Rooting**
King Root works well http://www.kingroot.net
**ADB Drivers**
Google drivers won't recognize M2 Mini, you have to edit the inf file.
You have to activate USB Debugging in the Developer Options for ADB to work.
1) Download drivers at: http://developer.android.com/sdk/win-usb.html
2) Edit android_winusb.inf
3) Go to [Google.NTamd64] section and add this to the end of the section :
;MEIZU M2
%CompositeAdbInterface% = USB_Install, USB\VID_0E8D&PID_201D&MI_01
%CompositeAdbInterface% = USB_Install, USB\VID_2A45&PID_0C02&MI_01
4) Reboot Windows without driver signature enforcement
HOW TO: http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
5) Install modified driver
HOW TO : http://developer.android.com/tools/extras/oem-usb.html
**Unlock bootloader**
You have to be on *Flyme OS 4.5.4i* for bootloader unlocking to work.
DOWNLOAD LINK : https://forum.meizufans.eu/topic/3905/flyme-os-4-5-4-stable-m2
1) You need busybox on the phone
DOWNLOAD LINK : https://play.google.com/store/apps/details?id=stericson.busybox&hl=en
2) You have to download the unlock_bootloader.sh
DOWNLOAD LINK: http://www37.zippyshare.com/v/fvm5edpr/file.html
2) Copy file to sdcard via MTP or ADB
adb push unlock_bootloader.sh /sdcard
3) Execute the file as root from ADB
adb shell
su
(accept warning on the phone)
sh /sdcard/unlock_bootloader.sh
4) Unlock
adb reboot bootloader
fastboot oem unlock
(wait for the phone to display confirmation)
"Volume Up" to accept
(wait for unlocking)
5) Reboot your phone into Flyme OS
It is very important to restart your phone and wait for Flyme OS to boot up completely before flashing a custom recovery.
**Custom recovery (TWRP)**
If you didn't boot into Flyme OS at the previous step, you might be stuck in boot loop in recovery and need to go back to the stock recovery (Uploaded on XDA by @murtaza1326)
DOWNLOAD LINK: https://drive.google.com/file/d/0B6kCPdWyvl3xa1RDWVRDRHlfS2c/view
XDA LINK: http://forum.xda-developers.com/showpost.php?p=66476298&postcount=574
1) Download last TWRP 3
DOWNLOAD LINK: https://mega.nz/#!PVcihSST!0yHN3p6dsKqAgW2-2krUSvvzRA-bFQmPR16wUbC7aKs
FOUND ON: http://www.movilesdualsim.com/tema/twrp-3-0-2_modnat-ltt-multilanguage.132746/
2) Flash recovery
fastboot flash recovery_3.0.0.3NAT<T.img
**CyanogenMod 12.1**
Last version seems to be 0.9 from April,16th 2016 on Russian forums.
1) Download Cyanogen
FORUM LINK: http://4pda.ru/forum/index.php?showtopic=715935
DOWNLOAD LINK: https://drive.google.com/file/d/0Bwzrxcf3P6N6S1hzaUYtNGFwMDA/view
2) Download Google Apps
GITHUB LINK: https://github.com/AlexLartsev19/cgapps/releases
DOWNLOAD LINK: https://github.com/AlexLartsev19/cgapps/releases/download/20160423/cgapps-arm-5.1.1-201604241754.zip
3) Boot into recovery
Hold "Volume Up" and Power
4) Copy everything to sdcard via MTP
5) Full wipe
Go to Wipe > Advanced wipe > check Dalvik, System, Cache, Data > Wipe
6) Flash CM and Gapps
Go to Install, select your CM zip file and install.
Do the same with Gapps.
7) Restart your phone
**Enjoy !**
**Screenshots**
Phone is in French,...but all languages available
Reserved @madcorp
any screnshots for cm12.1
Sent from my m2 using XDA Premium 4 mobile app
abhishekbhosale7399 said:
any screnshots for cm12.1
Sent from my m2 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sure! I'll try to post some later today
thank you ?
Sent from my m2 using XDA Premium 4 mobile app
@abhishekbhosale7399 screenshots added in the main post
Is it better than flyme 4.5.4i ? Are there any bugs? Is battery better? Are you happy with cm?
Nice work!! Permission to port CM12.1? I already have a CM12.1 for MT6735 in the works, but there are a few bugs. Can you do a bug report?
Regards
Nothing for Meizu m2 note ?
is it supports OTG ?
Sent from my m2 using XDA Premium 4 mobile app
It will be really helpful if you could post a video tutorial
update link please i am not able to install by going to about phone
Sent from my M2 Mini using XDA Premium 4 mobile app
i hope @madcorp build for Meizu M2 NOte too, thanks.
Not sure how close this is but looks genuine to debrick meizu phones. This is displaying it on the meizu m2 note but surely should work on the mini.
https://youtu.be/twgynLFAczc
Phone cannot see SIM
Yep, ive been using CM for few months, everything was good. But today i had to wipe /data, and couldn't. Recovery says, that it cannot mount /data. I thinks, that's because of encryption. I played around, tried wipe system from Settings, but it didn't work too. I and did
wipe data
in the phone's terminal. Saw lots of errors from apps, of course. Then rebooted and, oh my, phone was asking me for password to unencrypt the storage. Huh.
I enetered password, loaded into system, and, everything is pretty cool (ive got clean firmware, system apps only), except two things:
Phone is still encrypted, hence, i cant change firmware or do anything else
Second, and most terrible, is that phone can't see SIM card. No SIM at all. I changed SIM's position, but it does not work, yeah. Actually, SD card is working, i can see it from file manager, read/write files. Wi-Fi is working too.
I have backups for all partitions, except Internal Storage and /data. /data was backuped using Titanium Backup, files from Internal Storge moved to SD card. So, i do not care about files, i just want my phone up and running. Any help?
Do we have to unlock bootloader for flashing custom recovery
How downgrade from flyme 5.1 to 4 for bootloader unlock?
meizu m2
guys my mobile meizu m2 stack in bootloop
i am try to recovery but recovery lose
and mobile also not unlock bootloader
any one help me
to install recovery and stock rom
---------- Post added at 07:04 AM ---------- Previous post was at 07:01 AM ----------
murtaza1326 said:
Reserved @madcorp
Click to expand...
Click to collapse
guys my mobile meizu m2 stack in bootloop
i am try to recovery but recovery lose
and mobile also not unlock bootloader
any one help me to unlock bootloader and
install recovery and stock rom
Good Work!
Thank you very much. I needed something like this because I had a lot of problems with Flyme 5.x.x. Now with Root, Flyme 4.x.x,...everything is much better.
Thanks a lot!:good:
jcarlos.trillo said:
Good Work!
Thank you very much. I needed something like this because I had a lot of problems with Flyme 5.x.x. Now with Root, Flyme 4.x.x,...everything is much better.
Thanks a lot!:good:
Click to expand...
Click to collapse
Houw did you downgrade???
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS THREAD IS WIP FOREVER
So , while writing this thread, i had a bit of confusion where to start as here am posting as many problems that users normally face which may be related to flashing (before,while and after). So most problems starts up after flashing . since there as a sequence which i wrote before, lets begin with "BEFORE" followed by "WHILE" and "AFTER". This isnt a grammer class so stop holding ur nerves and lets come to the point.
BEFORE FLASHING :
Mostly People as a few questions related to "How to root" , if he/she got this doubt. So here we begin
Problems we usually face while unlocking a bootloader.
I am New here, plz help me to unlock bootloader
If u wants to unlock bootloader,kindly refer this thread
I am not able to unlock bootloader even after having unlock code, plz help me
well, plz eanble developer options by heading over to settings/about phone and tab on build number for 7 times and fget back to settings followed by developer options and check for oem unlock and plz enable it. Done , now ur code works to unlock ur bootloader from fastboot.
Iam not able to unlock bootloader due to honor site saying "INVALID CREDENTIALS" , "PLEASE ENTER A VALID IMEI/S.NO/MODEL NUMBER"
Well, i am sorry to say u this.
Here we had only two solutions.
1) If u wants to unlock your bootloader for free, plz contact honor support and give them the required info , if they gave u an unlock code then plz use it.
2) This is a paid service . i never used this but heard success from the one's who tried this. Try DC-UNLOCKER
I unlocked bootloader, but twrp wont boot after flashing it.
Check if the FRP status on fastboot is unlocked . If it is locked, then u cant flash anything even on an unlocked bootloader.
AFTER FLASHING
So here u flashed a twrp recovery. Here i see most of them asking a common question
i just installed twrp, flashed LOS ROm but am not able to boot it, stuck at bootanimation, or IS IN BOOTLOOP..
If you are having above questions, then am pretty sure u forgot to install vendor.zip .
if u dont know whats vendor.zip and where to find it. kindly check here and then u go.
i just installed twrp, flashed LOS ROM but am not able to remove encryption.
Plz always install a latest version of twrp , just wipe data,cache, and dalvik/RT cache . flash the rom and gapps(optional) also make a factory reset after flashing so that we can confirm that u are safe side
I flashed an "X" rom , booted and using that since "n" number of days, the battery is draining heavily. Plz help me.
Plz contact the developer of ur rom and provide them proper logs to solve ur issue.
OTHER ISSUES:
MY DEVICE STRUCK ON NRD-TESTKEYS AS BUILD NUMBER AND AM NOT ABLE TO FLASH ANY ROM /CANT UPDATE/...
This is a severe issue,
The reason behind this problem is , U flashed an ota update with twrp and then the flashing is incomplete . just like u flashed an update.zip and not the regional zip.
in order to over come such , all u need to do is reset the version number.
LO4 users plz flash this zip from twrp and then flash ur desired update.app build for LO4.
LO2 users plz flash this zip from twrp and then flash ur desired update.app build for LO2.
L19 users plz flash this zip from twrp. [zip has update.app in it andd flash directly [Thanks to @Venugopalu007 ]
I WANTS TO REBRAND MY HONOR 8 TO CERTAIN VARIANT. HOW TO DO THAT ?
REBRAND TO LO4 ----plz flash this zip from twrp and then flash ur desired update.app build for LO4.
REBRAND TO LO2 ----plz flash this zip from twrp and then flash ur desired update.app build for LO2.
REBRAND TO L19 ----plz flash this zip from twrp. [zip has update.app in it andd flash directly [Thanks to @Venugopalu007 ]
PHONE'S GETTING HOT DURING CAMERA
Long duration usage may heatup camera, close camera or flashlight to avoid heating issue.
I HAVE ISSUE WITH COMPASS , DO I NEED TO RECALIBRATE OR ELSE ANY OTHER ISSUE?
Compass on stock rom is well calibrated. plz make sure if there is something that effects compass in ur surroundings. (magnets, wifi router close to u etc)
SYSTEM UI REBOOTS WHILE NFC IS TURNED ON
That may be an issue with the theme u are using, kindly change ur theme or revert to origioanl theme from themes app.
XDA:DevDB Information
GUIDE, Tool/Utility for the Honor 8
Contributors
gopinaidu77
Version Information
Status: Stable
Stable Release Date: 2017-07-12
Beta Release Date: 2017-07-12
Created 2017-07-12
Last Updated 2017-07-12
Reserved
Reserved
Rommco05 said:
Maybe u can add, don't unlock bootloader before how is OEM disabled becasue after this u can't change OEM
Click to expand...
Click to collapse
I dint understand , please be clear.
Rommco05 said:
Ok,
-start is here > bootloader is locked
In this moment u can change OEM - disable it or enable it
Situation 1:
-OEM is disabled and if u unlock bootloader (with disabled oem), OEM stay always disabled and u can't flash anything
Situation 2:
-OEM is enabled and if u unlock bootloader (with enabled eom), OEM stay always enabled and u can flash what u want
Click to expand...
Click to collapse
Got u bro . Thanks for ur contribution
Wow. This is a huge guide bro. Well done.
Sent from my Honor 8 using XDA Labs
Rommco05 said:
This is developer project?
Click to expand...
Click to collapse
Sort of.
Sent from my Honor 8 using XDA Labs
Ah, if u use CHinese Honor and in EMUI 5.0, u cant Unlock OEM in Developer mode because it doesnt have. Rollback to EMUI 4.1 and go to adb command
adb oem unlocking hit enter
then u go to bootloader to unlock ur device.
Source : https://www.youtube.com/watch?v=9ClbjG0ic4U
Rommco05 said:
Because Chines models don't have this Google security "feature"
edit: probably Chines models too don't have FRP...
Click to expand...
Click to collapse
Yeah probably.
Bro Really great Work bro, 360- Solutions hatsoff!! for you work
venugopalu007 said:
Bro Really great Work bro, 360- Solutions hatsoff!! for you work
Click to expand...
Click to collapse
Hahaha .. u too plz contribute
gopinaidu77 said:
Hahaha .. u too plz contribute
Click to expand...
Click to collapse
I'm always there for you bro, without you, I am nothing :angel:
venugopalu007 said:
I'm always there for you bro, without you, I am nothing :angel:
Click to expand...
Click to collapse
Thanks
MY DEVICE STRUCK ON NRD-TESTKEYS AS BUILD NUMBER AND AM NOT ABLE TO FLASH ANY ROM /CANT UPDATE/...
i flashed the frd-04 file on twrp and now i have a boot loop cant flash from dload because i get the software install failed error
2matos said:
MY DEVICE STRUCK ON NRD-TESTKEYS AS BUILD NUMBER AND AM NOT ABLE TO FLASH ANY ROM /CANT UPDATE/...
i flashed the frd-04 file on twrp and now i have a boot loop cant flash from dload because i get the software install failed error
Click to expand...
Click to collapse
after flashing the frd l04 file do a factory reset and dload once the stock ROM
venugopalu007 said:
after flashing the frd l04 file do a factory reset and dload once the stock ROM
Click to expand...
Click to collapse
What?
gopinaidu77 said:
What?
Click to expand...
Click to collapse
he strucked at honor logo
venugopalu007 said:
he strucked at honor logo
Click to expand...
Click to collapse
What did he do?
gopinaidu77 said:
What did he do?
Click to expand...
Click to collapse
flashing stock firmware
Hi,
I'm facing an issue while trying to going back to EMUI. I have L09C432. Here what I did:
- I was on LOS with lastest TWRP
- I put the rolling back UPDATE.APP (81 Mb) in the dload of my sdcard then reboot with vol+ vol- and power pressed.
- I did the same with the big UPDATE.APP (3,30 Go) from frd-l09c432b120.zip
- Now i'm stuck, I can't do anything. I don't go far then the "you'r device is booting" message.
I tried the unbrick mod with Huawei Multi Tool, everything going fine but it doesn't change anything.
I tried to flash twrp for 4.1, nothing.
Plus I can't turn off my phone.
Any help will be appreciate, thanks in advance!