Hello,
I got a Galaxy S6 Edge+ Live demo Unit (G928X) and installed the latest firmware for G928F as I always do with the LDU devices. Unfortunately the fingerprint sensor doesn't work (I get an error message that there is a problem with that sensor and I should reboot) in my former S6 Edge LDU (G925X) the fingerprint sensor worked after installing a "normal" ROM.
Does anybody know whether the did not build in a fingerprint sensor in the G928X? Or is there a "trick" to get it working?
Thanx a lot!
best regards
I have the same problem on my g928x ldu ,after flashing g928f firmware the fingerprint sensor doesn't work , the cpu doesn't enter in deep sleep mode so it drain around 3% battery per hour in idle and the maximum cpu frequency is 1.3ghz for little cores and 1.8ghz for big cores. I tried a lot of roms and kernels but nothing changed.
mielletseed said:
Hello,
I got a Galaxy S6 Edge+ Live demo Unit (G928X) and installed the latest firmware for G928F as I always do with the LDU devices. Unfortunately the fingerprint sensor doesn't work (I get an error message that there is a problem with that sensor and I should reboot) in my former S6 Edge LDU (G925X) the fingerprint sensor worked after installing a "normal" ROM.
Does anybody know whether the did not build in a fingerprint sensor in the G928X? Or is there a "trick" to get it working?
Thanx a lot!
best regards
Click to expand...
Click to collapse
You need Twrp or CWM Recovery to do factory data reset after flash normal firmware and everything ok
Hello, sorry to use this thread, but i want to ask people you owns this demo if anybody open the phone? I ask this because my g928f had an accident and completely broken LCD and back cover. So it is more cheaper if i buy a demo and replace the motherboard. My doubt is if USB porting charge of demo have connectors for antennas?
hi
hi brother i have ldu device g928x how did u install g925f rom on demo device can u help me pls [email protected] or whatsapp me 00905301704278
Not don't have, because the motherboard is demo and don't have GSM parts
Plz tell me how to remove the retail mode from my g928x ldu completely without brick it. And which firmware needs to install.plz plz plz.
So, did you guys figure it out. I have the S7 demo and I'm looking into the fingerprint issue. Thanks
HI I have a 928 LDU device. I tryed to use the codes to stop retail mode but no result! what 928F firmware did you use? should you delete anything from in it? like bootloader or modem? 5.1.1 correct? please help!!! thank you!
Hi guys,
Which version of the SM-G928F did you use, please have I have the demo device.
hi people,i also have an 928x and installed 928f and now boot loop,enters direct recovery....no further...any advice?ty
Waterproof?
alex_SW said:
hi people,i also have an 928x and installed 928f and now boot loop,enters direct recovery....no further...any advice?ty
Click to expand...
Click to collapse
you better do not try to flash Original rom with ODIN will stuck for ever (in my experience) also do you know are the demo units S6 edge-s6 edge plus-s6 waterproof as the original???
Did u get it to work?
G928X
Hey brother, How did you flashed firmware SM-G928F into your s6 demo unit (SM-G928X) ?? Please tell me how you did it my friend thank you
I will have upto mega.co.nz
I will have upto mega.co.nz just doing it now :highfive:
XIAPAN said:
I will have upto mega.co.nz just doing it now :highfive:
Click to expand...
Click to collapse
Tutorial
Hi guys,
Thanks for all the nice things you do for the community.
I've a quedtion, well my Samsung s7 edge get stuck in the frp. So i tried your bypass methode with Realterm.
It worked already at 90% but now i've the problem that i can install your bypass apk but it wont start.
What should i do ?
I'm sorry for my bad english skills ?
Greets from Switzerland.
1. What device you have.
- Samsung Galaxy S7 Edge
2. What android Version you are running?
- 6.0.1
3. Buildnumber
- well i hope its this one (MMB29K.G935FXXS1APG3)
4. What you have done to the device
- Hard Reset and then get stuck in FRP
Hope you can Help me with this informations
Hi there.
Im looking for the Verizon S7 Edge combination file, if anybody have it please please send it to me! My s7 has water damage and i worked so hard to achieve it!! Please!!
greetings and happy holidays
Hi,
i want to flash the DBT-Version for Germany, because in my Version (G935FOJV3ERKH) VoLTE doesn´t work.
Do i have to take all 5 Files in Odin?
Thanks for help!
Hi!
i want to ask from the expert people for samsung s7 edge duos SM-G935FD ,my phone was also restarting and shuting down i duno what is the problem of my phone can u please tell me
righman said:
Hi!
i want to ask from the expert people for samsung s7 edge duos SM-G935FD ,my phone was also restarting and shuting down i duno what is the problem of my phone can u please tell me
Click to expand...
Click to collapse
Try formatting 1st, clean wipe. If it doesn't help replaced your battery
Hi, i got Samsung S10 Plus LDU so G-975X
My question is, can i install the ROM from my Country via Odin or i need special ROM for
IF IMEI dont work i have Man for it, but for now, i just wanna know if this gonna work, because i can not install anything on this LDU
This might help you:
https://forum.xda-developers.com/s10-plus/help/s10-live-demo-units-network-capabilities-t3905437