Hello,
I got a Galaxy S6 Edge+ Live demo Unit (G928X) and installed the latest firmware for G928F as I always do with the LDU devices. Unfortunately the fingerprint sensor doesn't work (I get an error message that there is a problem with that sensor and I should reboot) in my former S6 Edge LDU (G925X) the fingerprint sensor worked after installing a "normal" ROM.
Does anybody know whether the did not build in a fingerprint sensor in the G928X? Or is there a "trick" to get it working?
Thanx a lot!
best regards
I have the same problem on my g928x ldu ,after flashing g928f firmware the fingerprint sensor doesn't work , the cpu doesn't enter in deep sleep mode so it drain around 3% battery per hour in idle and the maximum cpu frequency is 1.3ghz for little cores and 1.8ghz for big cores. I tried a lot of roms and kernels but nothing changed.
mielletseed said:
Hello,
I got a Galaxy S6 Edge+ Live demo Unit (G928X) and installed the latest firmware for G928F as I always do with the LDU devices. Unfortunately the fingerprint sensor doesn't work (I get an error message that there is a problem with that sensor and I should reboot) in my former S6 Edge LDU (G925X) the fingerprint sensor worked after installing a "normal" ROM.
Does anybody know whether the did not build in a fingerprint sensor in the G928X? Or is there a "trick" to get it working?
Thanx a lot!
best regards
Click to expand...
Click to collapse
You need Twrp or CWM Recovery to do factory data reset after flash normal firmware and everything ok
Hello, sorry to use this thread, but i want to ask people you owns this demo if anybody open the phone? I ask this because my g928f had an accident and completely broken LCD and back cover. So it is more cheaper if i buy a demo and replace the motherboard. My doubt is if USB porting charge of demo have connectors for antennas?
hi
hi brother i have ldu device g928x how did u install g925f rom on demo device can u help me pls [email protected] or whatsapp me 00905301704278
Not don't have, because the motherboard is demo and don't have GSM parts
Plz tell me how to remove the retail mode from my g928x ldu completely without brick it. And which firmware needs to install.plz plz plz.
So, did you guys figure it out. I have the S7 demo and I'm looking into the fingerprint issue. Thanks
HI I have a 928 LDU device. I tryed to use the codes to stop retail mode but no result! what 928F firmware did you use? should you delete anything from in it? like bootloader or modem? 5.1.1 correct? please help!!! thank you!
Hi guys,
Which version of the SM-G928F did you use, please have I have the demo device.
hi people,i also have an 928x and installed 928f and now boot loop,enters direct recovery....no further...any advice?ty
Waterproof?
alex_SW said:
hi people,i also have an 928x and installed 928f and now boot loop,enters direct recovery....no further...any advice?ty
Click to expand...
Click to collapse
you better do not try to flash Original rom with ODIN will stuck for ever (in my experience) also do you know are the demo units S6 edge-s6 edge plus-s6 waterproof as the original???
Did u get it to work?
G928X
Hey brother, How did you flashed firmware SM-G928F into your s6 demo unit (SM-G928X) ?? Please tell me how you did it my friend thank you
I will have upto mega.co.nz
I will have upto mega.co.nz just doing it now :highfive:
XIAPAN said:
I will have upto mega.co.nz just doing it now :highfive:
Click to expand...
Click to collapse
Tutorial
After installed king nought rom on s7 edge 935f my phone is not recognize sim card help how to fix plzzzzzzzz
sayad1 said:
After installed king nought rom on s7 edge 935f my phone is not recognize sim card help how to fix plzzzzzzzz
Click to expand...
Click to collapse
Flash the CSC of your home country
That didn't work for me. Someone else has the same problem. I'm also on this problem while installing the King of Nougat rom.
So after I installed Android 7 my S7 edge doesn't boot any more can someone help me pls? I have the stock room btw
what model phone do you have ?
what did you do to cause this issue..
You have not given us enough information.
Hi all. I hope this hasnt been asked before but i have bought a galaxy s7 edge online which has turned out to be korean (g935l in settings but says g935 a/s on back) i would like to flash xsa stock firmware but haven't been able to find a consistent answer. I dont wont to root at the moment just want stock for now. Can soneone please tell me if it is possible and explain why and how or why not? Any help would be appreciated. Thanks very much ?
Hello guys , i dont know if i am sharing my problem in the right place
i have SM-G935FZSAXSG single sim card and i wanted to upgrade to oreo i tried smart switch but it gives me failing problem
after using odin i had like this i flashed like 5 diffrent rom but i always get dual sim card rom which is SM-G935FD and i am 100% sure that i am flashing SM-G935F one so i am very confused and no one shared the same problem so can you help me please
help please