I have just purchased Blackberry Priv. Everything is perfect only till I connect WIFI the phone restarts and does not connect to WIFI. I have updated the phone to latest available update.
Is this a defective piece or there is any fix to it. Phone is not at all used for a single day.
skhan33 said:
I have just purchased Blackberry Priv. Everything is perfect only till I connect WIFI the phone restarts and does not connect to WIFI. I have updated the phone to latest available update.
Is this a defective piece or there is any fix to it. Phone is not at all used for a single day.
Click to expand...
Click to collapse
Have you tried connecting to different WiFi networks?
While on the home screen, press and hold power button until phone restarts(ignore any dialog boxes)
Also check all your apps if you have installed any 3rd party.
Related
Hi all!
I started again a new thread where i write down my findings in the MR2 release of the X2. It's originally on the Esato-forums, so i just put the link over here:
http://www.esato.com/board/viewtopic.php?topic=196737
Nice THKS.
7. When hanging up a phonecall, the phone makes three loud beeps via the rear speaker. WHY???
same here... but only if the person u talk to hangs up first. its so annoying.
Lerka said:
7. When hanging up a phonecall, the phone makes three loud beeps via the rear speaker. WHY???
same here... but only if the person u talk to hangs up first. its so annoying.
Click to expand...
Click to collapse
YEp, and having the phone on silent does not make things better either...
Fix
i used registry editor and changed the value of calldrop from p(play) to none.
Rene,
when you hear 3 tones after call finish - is bluetooth activated in this moment for your x2? For example, do you use BT connection to your X2 in your car (handsfree)? Do you think that there is some special requirements for BT headset using to generate this sound on main unit if call was finished?
when you see bad power consumption results - is wifi activated in communication manager in your X2? I think that if you activate wifi - it can be reason for huge additional current if unit can't find appropriate wifi network for some reason.
For example, I found that if I activate wifi - I always should connect unit to charger every day. Then I found that this is specific issue only for me. The specific way of my wifi using is followed - I use 2 different wifi connections to my X2 (on home - secured network through router and in office - open wifi network). I do have connection issues every morning in office and every evening in home. Even if my X2 reports that it's connected to office network - I can see in status bar in Today screen that it's trying to conect again and again - and also I can't use browser or Goggle maps because no data connection is available through wifi. After I power off/on my unit - it can really connect to office wifi network and I can use browser and receive mails e t.c. When I return to home, I see that unit still be connected to office network - but it's impossile. And again - I can't use browser or receive mails by using my X2. After I power off/on unit - it can connect to home network. I can't fix issues in office and in home just turn off/on wifi in communication manager - issue still be actual after this. So, what I do every day - I turn off/turn on my unit every morning after arrive to office and again power on/ power off unit every evening when arrive home So I should spent 2 minutes every morning and 2 minutes every evening to reboot unit. On other hands I think that this is step to avoid more serious issues after couple of days of Windows using - you know usially you can see performance degradation after 1 week of using of any WinMob device - looks like this is result of lot of memory leaks, memory corruptions inside MSFT SW.
if we are talking about unexpected password issue or issue when you can't unlock unit by LOCK icon sliding left or right after press on power on button - for me it looks like memory is corrupted in MSFT lock app. As result some password is requested even if user never activates this password for lock screen. But it's clear that in reality, unit doesn't story in memory any password to compare with entered one - otherwise after power off/on sequency unit still ask password from you. But as I see in the same situation with my X2 - after I remove/insert battery and power on unit - I never see again this issue just after unit goes to Idle.
I think that memory, which is used by MSFT Lock code, can be corrupted only in scope of the same Windows process (of cause if memory is isolated for all processes in WinMob - I hope it's true) - so only other MSFT code can corrupt this memory. Do you know about any public forum where we can ask help from MSFT to see in this issue? I never see that Aaron wrote anything about any contacts in MSFT - but I think that MSFT should be also responsible for any product if Windows logo is applyed to device with WinMob?
To reduce the probability of this issue I never use AutoLock and always lock unit by click on Lock icon in Today panel or by long press on right HW kwy (with key sign).
darkbuster5 said:
i used registry editor and changed the value of calldrop from p(play) to none.
Click to expand...
Click to collapse
IT WORKED!!!
thank youuu
wifi
Hi! I have a similar issue with the wifi that PanichUS described.
The phone sees the network, tells that it's available, but I am not able to connect to it (so I can not do internet browsing, read the emails, etc.)
This happened to me while switching from one network to another, which were in two different places (and the phone was showing the network still available of the place I have already left). But in my case rebooting the phone did not help.
This is not the only case. The same thing also happens to me after I use bluetooth. The phone is connected to the wifi network (I could do internet browsing, etc.), I use bluetooth, and after that I can no more recover the connection. Again it shows that the network is available, but I can not connect to it.
The only thing which helped by now was restarting my house router.
Is the MR2 the last release of the firmware by date? I have bought my phone recently, and for me it seems that it was updated: I have radio, and the theme with grey background (X2 Titan) was activated in the very beginning.
MR2 is last update for X2. Don't wait another update.
Try turn off Wifi in Communication manager before power off and turn on Wifi back in Communication manager after power on.
Wifi
I have discovered that in fact I don't have problem to connect when using an open network, while with the protected one is always an issue.
Reboot of the phone doesn't change anything even if before doing it I switch off wifi in the connections manager and delete all the settings. Nothing - only reset of the router what helps.
I also tried to use other software (Wifi Monster) - the same thing.
The phone is really wonderful, it really has it's spirit with all these panels and generally the interface, but the wifi issue is really annoying!
My advice - don't install Resco Photo manager on X2.
Great app but works very bad on X2.
I instaled older version Resco.Photo.Manager 7.03. This work good.
Wisbaradvance 4.05 is verry unstable,problems and problems.
I've noticed that my [rooted] Vibrant frequently has trouble connecting, or staying connected, to WiFi networks.
At first I thought it was specific to my Verizon Actiontec WiFi router, however I've also noticed this at my office, where we use Motorola routers, as well as a few other locations that I frequent.
It's still possible that its a site-specific problem, but, less likely as I'm seeing this in a few locations.
Symptoms:
I configure my phone to connect to X network.
It successfully connects and all it fine.
I get out of range, it no longer sees network X and disconnects.
Some time later I return to my previous location and expect that in N seconds/minutes the phone will automatically reconnect.
A considerable amount of time passes and I notice it's still not connected.
I check the wifi settings and it days connection unsuccessful.
I tap the network, click connect and it works.
I've also noticed this after connecting to a network and the phone goes to 'sleep' or into an idle state. When a wake it up, it doesn't always automatically reconnect.
Anyone else seen this?
Any suggestions?
Many thanks.
i've had that problem. i am not sure what it was because I was rooted and Ryaned. I got sick of all the stupid lil bugs and had to wipe format and unroot. Now that I am back to the original condition, theres this sense of comfort knowing if something buggy happens, it's not "my" fault.
Thanks for the reply.
I noticed this prior to rooting and 'Ryan'ing'.
The capacitive buttons don't work all that well from time to time - specifically the Home button so maybe I should just exchange it. I'll call TMO tomorrow to see what they say.
I ordered a UK DVP last week, it comes with the latest firmware and I upgraded the OS to 7390, but wifi freezes. This doesn't happen to my US DVP.
After a few try I realised that it ight be zune which causes the problem. If I do not connect to PC after the reset, the wifi works ok. If I connect to PC zune, then it will have wifi issue unless you reset.
I just tried to re-install zune on PC and tried to forget the previous devices but it's not working.
Every first time I connect to PC(after reset the phone), once I disconnected, the phone will start download a certain number of games (5 with certain title) which I have purchased, I've purchased nearly all the xbox games but why these 5? And afterwards, the wifi freezes...
What shall I do now? Do I need to hard reset my PC?! To forget these damn devices.
(Everytime you connect a new device, it starts syncing automatically, you can't change setting before that, STUPID!!) I hate zune!!
chenliangchen said:
I ordered a UK DVP last week, it comes with the latest firmware and I upgraded the OS to 7390, but wifi freezes. This doesn't happen to my US DVP.
After a few try I realised that it ight be zune which causes the problem. If I do not connect to PC after the reset, the wifi works ok. If I connect to PC zune, then it will have wifi issue unless you reset.
I just tried to re-install zune on PC and tried to forget the previous devices but it's not working.
Every first time I connect to PC(after reset the phone), once I disconnected, the phone will start download a certain number of games (5 with certain title) which I have purchased, I've purchased nearly all the xbox games but why these 5? And afterwards, the wifi freezes...
What shall I do now? Do I need to hard reset my PC?! To forget these damn devices.
(Everytime you connect a new device, it starts syncing automatically, you can't change setting before that, STUPID!!) I hate zune!!
Click to expand...
Click to collapse
I believe your Zune Live ID is the same across all your resets. If its the same ID, then it will download your apps. That's my guess.
Yes but why only these 5 or 6? Every time is the same and I've bought dozens of apps. I can't even cancel downloading. Tried after reset my laptop it's still the same. This is stupid!
It will download only those purchased on the PC. Any apps purchased on the phone will not be auto doenloaded
Sent from my Venue Pro using XDA Windows Phone 7 App
I have a problem with my Nook Color's Wifi.
I received my refurbished Nook on Monday, and installed cm7 that night. I've got it overclocked at 1.2ghz and running smoothly for the last 3 days without any hangups or any other signs of problems.
The wifi was working great until this morning. Now, when I turn my WiFi on, it hangs on the Connecting... notice under Wi-Fi, and it eventually goes to Disconnected, and none of the nearby networks show up. The message then continually cycles between Connecting and Disconnected.
I was wondering if this was a fixable problem? Or if this is a damaged hardware issue.
I've taken a (bad) cell phone picture of the WiFi screen where it shows both the Connecting... message and Disconnected one. The top network "Commodore" should be active, and both my laptop and phone are connecting to it just fine right now. I've attempted rebooting and turning the device off for 15 minutes.
I'm really hoping I don't have to return and exchange, because I really like the Nook Color, but without WiFi I just simply can't use it.
1. activate wifi
2. go to wifi scanning
3. remove one secured SSID
4. add a secured SSID: generally your own one.
It disable airplane mode and everything is back online.
http://forum.cyanogenmod.com/topic/18630-wifi-not-working/
Lots of reading here
pezzish said:
I have a problem with my Nook Color's Wifi.
I received my refurbished Nook on Monday, and installed cm7 that night. I've got it overclocked at 1.2ghz and running smoothly for the last 3 days without any hangups or any other signs of problems.
The wifi was working great until this morning. Now, when I turn my WiFi on, it hangs on the Connecting... notice under Wi-Fi, and it eventually goes to Disconnected, and none of the nearby networks show up. The message then continually cycles between Connecting and Disconnected.
I was wondering if this was a fixable problem? Or if this is a damaged hardware issue.
I've taken a (bad) cell phone picture of the WiFi screen where it shows both the Connecting... message and Disconnected one. The top network "Commodore" should be active, and both my laptop and phone are connecting to it just fine right now. I've attempted rebooting and turning the device off for 15 minutes.
I'm really hoping I don't have to return and exchange, because I really like the Nook Color, but without WiFi I just simply can't use it.
Click to expand...
Click to collapse
Delete all of the connections and reboot.....
2kst said:
1. activate wifi
2. go to wifi scanning
3. remove one secured SSID
4. add a secured SSID: generally your own one.
It disable airplane mode and everything is back online.
Click to expand...
Click to collapse
This works!! Thank you, I didn't know there was an issue with Airplane mode.
2kst said:
1. activate wifi
2. go to wifi scanning
3. remove one secured SSID
4. add a secured SSID: generally your own one.
.
Click to expand...
Click to collapse
This fixed mine too... weird
Anyone know why this does this? how can it permanently be fixed? CM7.2 ?
This is the problem that i am getting.. Wifi connected No internet... please some one help me.. is it modem related problem ?
tell us something more.
did you trie different wifi? maybe router has some specific settings
I tried different routers... but having same problem... whenever i connect wifi...its working fine..but after some time net gone...and i get this message in wifi settings...wifi connected No internet... i tried different roms but stil having same problem
I have a similar issue
S7 connects to WiFi but can not use any co sections through apps
The browser works though.
It only happens on my bt home hub WiFi .
Bt says there is no fault on the line (other devices connect fine)
Samsung says the phone is fine
The issue is seemingly the s7 and Google have an issue with ipv6
But at start when i bought my s7 edge..i had no such problem... wil there be any solution
I had this problem too after nougat update but at the end it was a router configuration problem.
So whats the router configuration...kindly share some steps
What if i go back to marshmallow ? Wil it be safe ?
This is also a problem I have been getting in the last week or so. I have had the phone over a year. Not sure if it could be a recent update that is causing this?
Mine started 3 weeks ago. I didn't update anything on the phone or router.
Will it be good to go back to android 6.0? Will it be safe?
Check your time on your phone. Sounds dumb but if it's not set to the right time, your Internet won't load.
also smart switch could be the problem.
I've had an issue a few times, when wifi turned off and was trying to connect again, but smart switch foocked up wifi.
try disabling all weird features in wifi settings
time is set and no smart switch problem also.... what should i do now
I also have a Pixel C and I get this issue on that as well so it's not just s7 edge related.
Oh thats strange that even Pixel phone also has this problem... what wil be the solution
I get the notification from Google about making your connection secure. I used to accept it. Now when I forget the connection and get offered it again I refuse. This seems to be working for me.
I am also experiencing this problem after the nougat update and after the March security update. The WiFi notification gets the exclamation point and I have to cycle connection. I have changed nothing and I have verified nothing has changed in my settings. No other brands of phone or tablet in the house are experiencing this problem.
jimbobalu said:
I am also experiencing this problem after the nougat update and after the March security update. The WiFi notification gets the exclamation point and I have to cycle connection. I have changed nothing and I have verified nothing has changed in my settings. No other brands of phone or tablet in the house are experiencing this problem.
Click to expand...
Click to collapse
Did you get the notification from Google about securing your Wifi network? If you accepted then forget the network, rejoin and the reject the offer in the future. It worked for me.
mightywhites29111971 said:
Did you get the notification from Google about securing your Wifi network? If you accepted then forget the network, rejoin and the reject the offer in the future. It worked for me.
Click to expand...
Click to collapse
Nope, never got that notification. Tried forgetting and then reconnecting, no notification, and still WiFi sporadically says no internet when connected.