(sorry I can't post any links, but you can google the words in bold)
Are there any Android head units that support optical audio out?
I've been researching the last few nights (hours!) for a WIRED way to get a toslink optical cable to a Audison Prima AP8.9 Amp/DSP.
Are there any electrical engineers out there who have thought about bypassing the onboard DAC to get digital output?
Or.... is my only option to provide <96kHz optical audio to get an AptX lossless Bluetooth receiver like the Neet AptX lossless bluetooth receiver. Can anyone share experience on how well the Android units perform constantly connected to a BT receiver for all car audio? Esp. if you have the new Pumpkins with the Parrot BT card, in case that improves things.
Thanks!
I'm looking for the same answer, i've installed the neet receiver, but unfortunate for me, the head unit does not connect. I don't think it can be used as transmitter.
I've found this, but I don't know if it works...
http://www.matrix-digi.com/en/products/158/index.html
You all may be overthinking this. Turns out plenty of modern android devices can use standard USB audio hardware. You just need an OTG cable, and the kind of USB audio output device that doesn't need a specialized driver under Windows or Linux. I've hooked up many different USB audio dongles you my Galaxy S3 and S4. The S4 wouldn't charge while hooked through the particular OTG cable, but the S3 does. As a matter of fact, I've been using it as the media player in my car for years.
Admittedly, I've only used the optical out on some of my devices occasionally, but I imagine it would still work for most.
Update: Not all supposed "OTG" cables work. This is the one I bought in Jan 2014 that works for both audio and charging on my S3 with CyanogenMod 11: https://www.amazon.com/gp/product/B009YPYORM/
Today I received an Android 6.0 Head Unit from A-Sure for an Audi A3. I connected a Terratec Aureon Dual USB DAC. I got sound, but couldn't control the volume. Changing the android system volume had no effect.
I am considering spending a couple of bucks on the app "USB Audio Player PRO" and test it again. If this doesn't work, i will have to return the unit.
Greetings from Germany
So i had to return the Head Unit. I tried a different one by "Skandinav", with this one there was no sound at all from the USB DAC
retlaps said:
Today I received an Android 6.0 Head Unit from A-Sure for an Audi A3. I connected a Terratec Aureon Dual USB DAC. I got sound, but couldn't control the volume. Changing the android system volume had no effect.
I am considering spending a couple of bucks on the app "USB Audio Player PRO" and test it again. If this doesn't work, i will have to return the unit.
Greetings from Germany
Click to expand...
Click to collapse
Hi,
You need to connect to DAC with digital volume control like Helix DSP Pro
Greetings from Singapore
daviestar said:
(sorry I can't post any links, but you can google the words in bold)
Are there any Android head units that support optical audio out?
I've been researching the last few nights (hours!) for a WIRED way to get a toslink optical cable to a Audison Prima AP8.9 Amp/DSP.
Are there any electrical engineers out there who have thought about bypassing the onboard DAC to get digital output?
Or.... is my only option to provide <96kHz optical audio to get an AptX lossless Bluetooth receiver like the Neet AptX lossless bluetooth receiver. Can anyone share experience on how well the Android units perform constantly connected to a BT receiver for all car audio? Esp. if you have the new Pumpkins with the Parrot BT card, in case that improves things.
Thanks!
Click to expand...
Click to collapse
yes, you can connect to the DAC, thereby outputting digital audio from applications and transport flash drive.
this can be done not only with android devices, but also with conventional tape recorder, some installations you can look at my YouTube channel
unfortunately links for new users are forbidden, you can search by my nickname - "jonjonni toslink Евгений Фещенко"
daviestar said:
(sorry I can't post any links, but you can google the words in bold)
Are there any Android head units that support optical audio out?
I've been researching the last few nights (hours!) for a WIRED way to get a toslink optical cable to a Audison Prima AP8.9 Amp/DSP.
Are there any electrical engineers out there who have thought about bypassing the onboard DAC to get digital output?
Or.... is my only option to provide <96kHz optical audio to get an AptX lossless Bluetooth receiver like the Neet AptX lossless bluetooth receiver. Can anyone share experience on how well the Android units perform constantly connected to a BT receiver for all car audio? Esp. if you have the new Pumpkins with the Parrot BT card, in case that improves things.
Thanks!
Click to expand...
Click to collapse
Well, don't fall into this hole. (warning to new users)
I have the Prima dac/amp, and the sound is amazing, and it can be connected to an Android phone via OTG to Toslink adapter, or via Bluetooth adapter with Toslink out, but it has one very nasty issue: when the amp is starting, and there is no Toslink signal, it won't register the connection. So if you later connect your phone, you have to cycle through the input sources Digital->Aux->Master->Digital to again register your connection.
So unless you connect your phone or turn on your BT receiver _before_ you start the car up, you will need to fiddle with cycling the source (while also driving the car). (That is if you also have the optional control unit with a display.)
Why they designed the device this way is just beyond me.
I hope its all right to join an old discussion.
I have a similar problem, I want to connect an android head unit in my car to an external digital amplifier. The amplifier itself have SPDIF input (mosconi GALDEN Pico 12 channels https://mosconi-system.it/product/gladen-pico-812-dsp/) but I can't find an android head unit running Android 10 with SPDIF output for my car. I've found converting card USB->SPIDF (for example: https://www.amazon.com/Douk-Audio-C...1&keywords=usb+to+spdif&qid=1617899902&sr=8-3) but I still missing some points:
-In Android 10, how do I switch all audio outputs to the converting card? Is it a part of the Android or external application?
-What happen when playing multi channel media (such as 5.1)? does each channel transfer on each on?
-Is it possible to use the same method to BT? The Pico have an optional BT card.
Thanks in advance, Haim
haim_gds said:
-In Android 10, how do I switch all audio outputs to the converting card? Is it a part of the Android or external application?
Click to expand...
Click to collapse
Android usually automatically switches to USB audio when found, but many implementations do not. Sometimes there's a setting in the developer menu for prioritizing USB audio, but sometimes that doesn't do anything.
USB audio of any kind is not supported on my Sony X800D Android TV.
haim_gds said:
-What happen when playing multi channel media (such as 5.1)? does each channel transfer on each on?
Click to expand...
Click to collapse
Multichannel USB sometimes works, and sometimes doesn't. Certainly it can work, such as on many Android TV implementations like NVIDIA shield.
haim_gds said:
-Is it possible to use the same method to BT? The Pico have an optional BT card.
Click to expand...
Click to collapse
Multichannel Bluetooth is not a standard, although some implementations like enhanced aptX can support it.
Have you also considered that SPDIF surround is always encoded, and thus is output at a fixed volume? Your head unit would not be able to control the volume; it would have to be done after decoding, like at the power amplifier stage.
MarkerB said:
Android usually automatically switches to USB audio when found, but many implementations do not. Sometimes there's a setting in the developer menu for prioritizing USB audio, but sometimes that doesn't do anything.
USB audio of any kind is not supported on my Sony X800D Android TV.
Multichannel USB sometimes works, and sometimes doesn't. Certainly it can work, such as on many Android TV implementations like NVIDIA shield.
Multichannel Bluetooth is not a standard, although some implementations like enhanced aptX can support it.
Have you also considered that SPDIF surround is always encoded, and thus is output at a fixed volume? Your head unit would not be able to control the volume; it would have to be done after decoding, like at the power amplifier stage.
Click to expand...
Click to collapse
Do you know of if it's possible to allow the headunits to play higher than 48khz resolution through the optical or coax outputs ?
dfal47 said:
Do you know of if it's possible to allow the headunits to play higher than 48khz resolution through the optical or coax outputs ?
Click to expand...
Click to collapse
Have to ask - what
marchnz said:
Have to ask - what
Click to expand...
Click to collapse
The unit forces 24b 48khz audio, coaxial can output 192khz tracks and optical upto 96khz . Higher resolution audio output.
Neutron or UAPP will allow higher resolution, but you'll probably lose Navi directions as those programs bypass the android audio layer and mixer.
Basically you need a high resolution non- Android media player, with a navi input and mixer, that also has an spdif output.
The Alpine UTX-A09 looks like it can do that, assuming it isn't Android based /doesn't force 16/48 output from all sources when the mixer is enabled (in non "Alpine Direct" mode). Looks like the Alpine pxe-x09 has a mixer, so it should also be able to mix in navigation instructions.
Some of the Helix DSPs may mix or prioritize different inputs - the documentation isn't clear.
If you use spdif connection vs optical you run the risk of creating a ground loop unless the source is floating ie running on its battery power.
You can blow out all your high frequency drivers in a second if the ground loop creates feedback oscillations.
A common ground point may or may not prevent it. Using toslink to couple eliminates this potential issue.
For car hookups best practice to use heavy gauge wire for positive* feed, preferably coming directly from the battery for high wattage amps, source auxiliary equipment from the same end point. Do not daisy chain.
Same is true with home hifi, avoid using spdif cables to couple amps, preamps, receivers, cable boxes, etc. Amps, recievers are designed to be floating and not connected to ground. Do mix earth grounded and floating equipment unless connected by toslink only ie a tower PC with a 3 prong plug and a reciever (2 prong plug, floating).
*if you use a chassis grounding point, use only one and do not daisy chain!
dfal47 said:
Do you know of if it's possible to allow the headunits to play higher than 48khz resolution through the optical or coax outputs ?
Click to expand...
Click to collapse
Sorry for the delay.
DTS has had 96kHz/24 bit for many years, and they work through any SPDIF interface... as you wanted. They don't actually change the hardware interface speed, but rather encode the extra data into the sales 48kHz stream.
I've never bothered to encode anything with it, because I'm guessing it actually makes compression worse. You're squeezing much more data through the same early 90s compression algorithm, and DTS is already lossy enough. Factor-in that higher sample rates are not detectable in blind tests, and it just seems like a bad idea.
Hmm... Unless the 96kHz/24 bit extension algorithm is much more efficient at compression, considering it was introduced much later than the base DTS algorithms in 1991, and may have leveraged more recent technologies. In that case, it would definitely be the better choice. Unfortunately, I haven't read anything about this possibility.
Good reading on the 96kHz/24 bit topic:
DTS (company) - Wikipedia
en.m.wikipedia.org
Get the Rundown on the DTS 96/24 Audio Format
DTS 96/24 is part of the DTS family of audio formats but it's rather rare since the advent of Blu-ray Disc.
www.lifewire.com
Bumping an old, but good, thread. I have exactly the same amp (well, the 5.9), and an Android unit with a TOSlink port - but it seems to be turned off as I can’t see any light coming from the TOSlink cable. Any idea how to turn it on?
I have a FiiO as a backup but prefer not to do SPDIF because I need another device for the Audison to take SPDIF input …
MarkerB said:
Sorry for the delay.
DTS has had 96kHz/24 bit for many years, and they work through any SPDIF interface... as you wanted. They don't actually change the hardware interface speed, but rather encode the extra data into the sales 48kHz stream.
I've never bothered to encode anything with it, because I'm guessing it actually makes compression worse. You're squeezing much more data through the same early 90s compression algorithm, and DTS is already lossy enough. Factor-in that higher sample rates are not detectable in blind tests, and it just seems like a bad idea.
Hmm... Unless the 96kHz/24 bit extension algorithm is much more efficient at compression, considering it was introduced much later than the base DTS algorithms in 1991, and may have leveraged more recent technologies. In that case, it would definitely be the better choice. Unfortunately, I haven't read anything about this possibility.
Good reading on the 96kHz/24 bit topic:
DTS (company) - Wikipedia
en.m.wikipedia.org
Get the Rundown on the DTS 96/24 Audio Format
DTS 96/24 is part of the DTS family of audio formats but it's rather rare since the advent of Blu-ray Disc.
www.lifewire.com
Click to expand...
Click to collapse
Toslink can support 24 bit/192 khz.
Optical coupling is preferred as it carries no risk of creating ground loops; optical isolation.
A ground loop can smoke (literally) all your tweeters and maybe the power amp in a second.
blackhawk said:
Toslink can support 24 bit/192 khz.
Optical coupling is preferred as it carries no risk of creating ground loops; optical isolation.
A ground loop can smoke (literally) all your tweeters and maybe the power amp in a second.
Click to expand...
Click to collapse
I think you accidentally replied to the wrong post. My topic was about the quality of the DTS 96kHz/24 bit encode, which is completely independent of which of the two physical SPDIF interfaces is used.
I've been searching for an Android replacement head unit to my current Kenwood DNX525DAB.
One good thing with the Kenwood was the ability to play video to an external screen at the back of the car and continue using the satnav on the main screen. The video's audio could also be played from the rear speakers whilst (e.g.) playing radio from the front speakers.
I've messaged via Aliexpress if any Joying type units have this capability but the language barrier is a problem.
Can anybody say whether this is possible mechanically or with extra software installed with any android unit?
From my research, assuming that you have dual zones installed in your vehicle (separate monitors/separate speakers for the rear passengers) via the RCA A/V outputs:
For audio and video sources that are native to the head unit via the android OS such as music/mp3s, videos, streaming services, and other android apps; you can only display and play that media to the main zone (aka your main android screen and your main connected speakers). You CAN NOT output the audio/video from apps to your secondary zone.
The only audio/video you are able to display to your secondary zone (that are connected via the analog RCA A/V out) is from the analog RCA A/V inputs from the back of the head unit or the physical DVD player in the head unit.
What this basically means is that if you want your rear passengers to be able to stream, play music, play videos, etc independently from your main head unit, you need to plug in a device that can do all of that separately via the analog RCA inputs. (or their only media source will be the physical DVD player). I've seen other people plug in other android boxes that have RCA outs to the back of the head unit for their rear passengers to control.
Hey! I'm more of an Android newbie (I have an iPhone). I just installed an Android head unit in my car. So far everything is pretty good except the Bluetooth audio quality. Whenever a cymbal hits in a song, it distorts and sounds really bad. It doesn't distort when playing music any other way. I know it's not my iPhone, because it streams to other devices just fine. This seems to be a common problem in some radios, and even just the android OS. How can I fix it?
My radio is an Android 6.0.1 unit with an Octa Core chip, 2gb of ram, and 32gb of flash, which I bought from Idoing on AliExpress (since it won't let me post a link)
Thanks!
I'm having the same issue. I'm really bummed about it as I love the unit but the bluetooth sound quality just sours it
I've read people just getting Bluetooth dongles and attaching them to AUX, but that's more of a hack then a solution.
We may be SOL if it's a hardware issue. I'll keep searching.
After reading a lot of the MTCD threads I've heard people using this Bt+Wifi dongle
https://www.ebay.com/itm/151917910379
According to reports, the head unit will use it as the system's internal Bluetooth.
I've ordered one and once it arrives will report back on it this fixes our issue.
Dont know if it's relevant, but I'm using the preamp outs on my unit as my car has a builtin bose amplifier,
@bonesteel94 are you using the preamp outs or just the standard amplified signal from the head unit?
Hi. I bought an android head unit for my megane 2.2. All the sound is good except that my subwoofer doesnt sound like with my old Alpine player. I recently bought a bigger and better subwoofer, but its still doesnt sound like it should. I tried connecting to audio R and L and it gave a little more loud bangs, but more disortion. I have 1 subwoofer rca cable, bought a Y cable for it to make that double channel but its still the same disappointing result. Can I somehow make that work like it should or cant help that with these android head units. I want to mention that i dont have a subwoofer setting on the unit.
Link : https://www.aliexpress.com/item/100...0d5-7736-4cad-8f17-e97911a2fefc-1&pdp_ext_f={"sku_id"%3A"12000029501992407"%7D&pdp_npi=3%40dis%21USD%21159.26%21100.33%21%21%21%21%21%40210212c016773242106348294d0724%2112000029501992407%21sea%21RO%21926091275&curPageLogUid=NBigXtaxpApf
Hi!
If you bought this device in the link then Android DSP equalizer and output chip is to low to transfer bigger wattage to speakers.
One way to fix that is to buy external DSP output with more wattage then default android unit and connect amplifiers to this one, then reroute unit to use this external output.
If you have external subwoofer with amplifier try to decrease output to this amplifier in extra settings or factory menu (pin code) / sound. Output will usually be marked as speakers.