Bricked I9505 when tried to update modem and bootloader - Galaxy S 4 Q&A, Help & Troubleshooting

Hello.
I was trying to install another custom rom but this time it required new bootloader and modem so i was like okay.
I followed the instruction and selected modem as it said.
It did it's thing and then for some reason it failed and i unfortunately i closed odin and i don't have that log anymore.
And then i tried to flash stock rom but i get this...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
Click to expand...
Click to collapse
So then i downloaded the pit file for I9505 and i get this...
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
Click to expand...
Click to collapse
So what the hell do i do at this point ?
And it says that is write protected...
Kies is also not helping...
Whoever solves this problem is my hero, thanks!!!

If you have a PC, use the back USB ports. This can make a difference.
Also try a different USB cable, odin version and eventually windows version. All those things can make a difference.

GDReaper said:
If you have a PC, use the back USB ports. This can make a difference.
Also try a different USB cable, odin version and eventually windows version. All those things can make a difference.
Click to expand...
Click to collapse
Ill try with different cable. This really is strange, it never happened before. Idk if modem upgrade would cause that....

veljo323 said:
Ill try with different cable. This really is strange, it never happened before. Idk if modem upgrade would cause that....
Click to expand...
Click to collapse
God damn it it's actually a cable, can't believe it! It was working perfectly. Thank you anyway .

Related

[Solve] the problem of installing the ROM program odin

Hello my friends, how are you all
I present to you a simple explanation to you suffers from spam in odin
For example:
Code:
complete write operation failed
Odin flash fail
<ID:0/025> Initialzation..
<ID:0/025> Get PIT for mapping..
<ID:0/025> Firmware update start..
<ID:0/025> system.img
<ID:0/025> NAND Write Start!!
<ID:0/025>
<ID:0/025> Complete(Write) operation failed.
<ID:0/025> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
The simple solution is to follow the following steps:
1-The installation program Odin3 v3.07
2-Enter the download status And connect the phone to the computer
Then open the program Odin
3-We download the file PIT
4-And sail on this phone to correct some errors and keep in the PIT box in Odin
5-We work to Wipe factory
6-We install from four files
I9500XXUAMDE_I9500ODDAMDC_INU.zip
7-After we wipe factory And restart the phone.:good:
And here we have the explanation and I hope I succeeded the explanation Greetings everyone
Thank you friend, looks very useful!
tamirda said:
Thank you friend, looks very useful!
Click to expand...
Click to collapse
Thank you my friend tamirda
Sent from my GT-I9500 using xda app-developers app
Why are you messing around with the PIT file?
This is the easiest way to brick your phone if the pit file you use is corrupt or not for your phone. And I'm not talking about soft brick thats recoverable... You will have a brand new $600+ paperweight...
All you need to flash is the rom file (must be either .tar or .tar.md5) in PDA, make sure repartition isn't ticked and flash...
Also make sure KIES is NOT RUNNING...
If you have the new firmware, MH8, then this definately WON'T work...
I have the same problem but the solution does not work
I try to install this rum brought here and what I get this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUAMDE_I9500ODDAMDC_I9500DDUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
GT-I9500
S4
Anyone know what can be done
The device enters only state DOWNLOAD not RECOVERY
yony100200 said:
I try to install this rum brought here and what I get this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUAMDE_I9500ODDAMDC_I9500DDUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
GT-I9500
S4
Anyone know what can be done
The device enters only state DOWNLOAD not RECOVERY
Click to expand...
Click to collapse
simply go to http://www.sammobile.com/firmwares/2/
download your latest firmware and flash via odin
1. do no check RE-PARTITION option..leave it with auto-reboot and F.reset time (DEFAULT option)
2. flash only PDA file or single file downloaded from sammobile

Plss help me!

Hi,
I wanted to go back to my stock rom after installing Cynagogenmod. But suddenly odin gave me a fail and when I restarted my phone it gave me this message: Firmware upgrade encountered an issue. Please select recovery mode in kies & try again. I have tried everything! Please help me!
alistylow said:
Hi,
I wanted to go back to my stock rom after installing Cynagogenmod. But suddenly odin gave me a fail and when I restarted my phone it gave me this message: Firmware upgrade encountered an issue. Please select recovery mode in kies & try again. I have tried everything! Please help me!
Click to expand...
Click to collapse
Re-Flash it with ODIN
are you putting the phone into download mode?
winwiz said:
Re-Flash it with ODIN
are you putting the phone into download mode?
Click to expand...
Click to collapse
I already tried te reflash it but it gives me a fail everytime! It gives me this code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMGA_I9505PHNBMG4_I9505XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
alistylow said:
I already tried te reflash it but it gives me a fail everytime! It gives me this code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMGA_I9505PHNBMG4_I9505XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
User the usb ports in the back of your pc. If that didn't work try a different pc.
Make sure that Kies is not running and all Kies processes are closed.
Open Task Manager and double chek this.
This is a very important step as Kies can interfer with Odin.
Make sure that you have downloaded the correct firmware from Sammobile.
Turn off phone completely
Wait a couple of seconds
start phone in Download mode
Open Odin
Connect phone to PC.
Load the downloaded firmware (from Sammobile) as PDA
Leave Auto Reboot and F. Reset checked and hit Start.
If it fails again, try with another version of Odin.
Perhaps Odin 3.07 will work?
Also, and I know this sounds stupid, use a different USB cable or the original Samsung one if you're not already... Made the world of difference when I was flashing....

[Q] Help! Stuck Recovery Boot and All Odin Fail! (Auth)

<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_G900VVRU1ANCG_G900VVZW1ANCG_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
All flashes fail. Full Tar,Firmware,Kernel, etc...
Just want phone to work again rooted or not, kitkat, lollipop, whatever...
Plz Help =)
beagler89 said:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_G900VVRU1ANCG_G900VVZW1ANCG_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
All flashes fail. Full Tar,Firmware,Kernel, etc...
Just want phone to work again rooted or not, kitkat, lollipop, whatever...
Plz Help =)
Click to expand...
Click to collapse
What happened to cause you the need to odin to NCG?
Are you using the original data cable? Try a different USB port. Try a different version of odin.
Tulsadiver said:
What happened to cause you the need to odin to NCG?
Are you using the original data cable? Try a different USB port. Try a different version of odin.
Click to expand...
Click to collapse
Yes original cable
Tried to revert back to kitkat, it passed. Now it goes to Samsung Splash Screen then reboots to recovery.
All flashes end the same way, from any version. Have factory reset and everything else.
Nothing will pass.
What is/was the FW you were on before using Odin?
Dudash said:
What is/was the FW you were on before using Odin?
Click to expand...
Click to collapse
OC4
beagler89 said:
OC4
Click to expand...
Click to collapse
Download and flash the OC4 .tar from sammobile.

PIT file for SC-04E

I have a SC04E (Japanese NTT Docomo Galaxy S4) and I failed to flash Cyanogenmod and bricked my phone. When I try to put the original ROM from sammobile.com, I get this error on Odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
From that I think I need a PIT file to flash but I couldn't find any pit file on the web.
I really need a pit file for it or if there's any way I can fix this problem, please reply.
Thank you in advance.
taichiksto said:
I have a SC04E (Japanese NTT Docomo Galaxy S4) and I failed to flash Cyanogenmod and bricked my phone. When I try to put the original ROM from sammobile.com, I get this error on Odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
From that I think I need a PIT file to flash but I couldn't find any pit file on the web.
I really need a pit file for it or if there's any way I can fix this problem, please reply.
Thank you in advance.
Click to expand...
Click to collapse
You probably do not need a .pit file.
In 99% of the cases the error is resolved by the following:
- Different usb port
- Different usb cable.
Lennyz1988 said:
You probably do not need a .pit file.
In 99% of the cases the error is resolved by the following:
- Different usb port
- Different usb cable.
Click to expand...
Click to collapse
Thank you for your quick reply,
I have tried changing usb ports and checked all the cables I had and I even used different computer but I couldn't get it to work and always got the same message...
*sigh*
taichiksto said:
Thank you for your quick reply,
I have tried changing usb ports and checked all the cables I had and I even used different computer but I couldn't get it to work and always got the same message...
*sigh*
Click to expand...
Click to collapse
Are you trying to flash the latest firmware available? If you try to flash the latest firmware then it's still either one of these thing.
- Different usb cable
- Different usb port
Lennyz1988 said:
Are you trying to flash the latest firmware available? If you try to flash the latest firmware then it's still either one of these thing.
- Different usb cable
- Different usb port
Click to expand...
Click to collapse
I downloaded the latest firmware and there wasn't any errors but it gets stuck where the samsung logo appears. Is there any step that I missed?
it also says Recovery Mode on the carrier logo in blue and then reboots, next time without the message and shows samsung logo and shows the battery charging
nvm I redownloaded a latest rom and it fixed the issue

Samsung Galaxy Note 3 Odin3 v3.12 N9000 by sawgent.pit

I want to fix Samsung Galaxy Note 3 which is stuck in reboot.
I used Odin3 v3.12 to flash N9000QXXUEBQA2_N9000QTUREBPL1_N9000QJVUEBPJ1_HOME.tar.md5 but failed!
LOG:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Then I used Odin3 v3.12 and N9000 by sawgent.pit to flash PIT but failed!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Mobile Model: SM-N9000Q
Can you suggest anything else? Please help!
Have you flashed firmware for your model??.
Reads as you have destroyed PIT.
Did you try using different usb cables and usb ports? Tried flashing with Odin 3.07?
JJEgan said:
Have you flashed firmware for your model??.
Reads as you have destroyed PIT.
Click to expand...
Click to collapse
I've used the firmware of the mobile's model.
I did not intentionally do anything to PIT, it be came like this when I made a recovery.
em989 said:
I've used the firmware of the mobile's model.
I did not intentionally do anything to PIT, it be came like this when I made a recovery.
Click to expand...
Click to collapse
Recovery as in restored a backup??

Categories

Resources