Related
How to root Lenovo TAB A7-40 A3500-FL?
[Solved] See the guide below!
Device info:
Model number: Lenovo A3500-FL
Android version: 4.4.2
Kernel version: 3.4.67
Build number: A3500FL_A442_01_25_140823_SE
BB Chip: MT6582
MS Board. A3500FL
Bar code: this was my device's serial number
SW Ver.: ALPS.KK1.MP1.V2.10
Custom Build Verno.: 1408775889
Managed to get cwm and root with this guide: http://forum.xda-developers.com/and...vo-a3500-h-t2879208/post55491817#post55491817
Modified the guide for Lenovo A3500-FL!
EDIT: Also some users have reported that this guide doesn't do the trick or is out-dated, so copypasted the guide from this post here.
Guide
1. Download attachment cwmRecovery.zip and download latest Flash_tool (version 5.1352.0) can be downloaded from here)
1.1. Enable USB-debugging. (How to do this)
2. Manually install the drivers from the attachment a7_40_drivers.zip for the LenovoTablet before plugin it to computer (win7 dirvers work for win8 too).
2.1. To install unsigned/uncertified drivers on Windows 7: http://en.kioskea.net/faq/3914-windows-7-how-to-install-unsigned-drivers
2.2. To install unsigned/uncertified drivers on Windows 8: http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
2.3. After you have disabled the driver signature verification, you can install the drivers like this: Right click My computer, Manage, Device Manager, right click your computer at the top, Add Legacy hardware, next, Install plapla manually, next, Show all Devices, Have a Disk.., Browse to the driver folder where you unzip them, choose example windows7 and the 64 version (win7 drivers work for win8.x too), install every device. Then follow the guide.
(Note: Otherwise Windows only installs the normal automatic drivers and its more difficult to install the other drivers.)
2.4. Plug your device to PC.
3. Download the latest supersu zip file (version 2.46) from attachments or from https://download.chainfire.eu/696/SuperSU/
3.1. Move the zip.-file to the Sdcard.
4. Turn off your device.
5. Unpack cwmRecovery.zip
6. Run Flash_tool.exe with Admin Rights.
7. Chose Scatter-Loading and choose MT6582_Android_scatter.txt (in Recovery folder).
7.1. Now you will see checekd only one checkbox - recovery, if not click on it and choose recovery.img
7.2. Press Download.
7.3. Connect your device.
7.4. Wait few seconds.
8. Have CWM on your device .
9. Unplug your device.
10. . Boot to cmw recovery by turning off your device. Then press and hold VOL DOWN + VOL UP and then also press and hold POWER for about 7 seconds.
10.1. Choose " Install zip from sdcard." (To confrim always use the Power Button)
10.2. Choose "zip from sdcard".
10.3. Select SuperSU-v2.46.zip from sdcard and apply.
10.4. Have a rooted tablet.
It might be necessary to always flash the CWM with the Flashtool directly before you startup the device. Otherwise it will start the original AndroidRecovery again.
It might also be necessary to use different drivers from here.
If the supersu zip doesn't install, try toggling the signature verification to disabled from cwm->install zip from sdcard->toggle signature verification.
Tested and working on Levono A7-40 3500-FL with kitkat update, build number A3500FL_A442_01_25_140823_SE, from ota. Attached screenshot for proof. Also other people have reported that this works for later updates too, for example A3500FL_A442_01_27_141127_SE.
You can update to the latest OTA firmware by first going back to stock recovery. See the second post for the guide.
Thanks and credits go to: @Koli96 and @bobais
How to go back to stock rom/recovery and update to latest Lenovo OTA firmware update
So, it's pretty simple, you take the stock_recovery.zip from the first post, extract it, and replace recovery.img in the recovery folder with the stock one.
Then :
Quote:
4. Turn off your device.
6. Run Flash_tool.exe with Admin Rights
7. Chose Scatter-Loading and choose MT6582_Android_scatter.txt (in Recovery folder)
7.1. Now you will see checekd only one checkbox - recovery, if not click on it and choose recovery.img
7.2.. Press Download
7.3. Connect your device
7.4. Wait few seconds.
And that's it !
On a side note, if it seems stuck on a black screen with a loading circle after factory reset, you have to put the tablet in landscape mode and restart (the shutdown menu appears without any problem) - this issue doesn't seem related to recovery, but a bug within lenovo firmware and the first configuration screen.
Side note 2: The first boot after flashing new update might take 15mins.
Side note 3: After updating to the latest OTA you can go back to cwm recovery with the guide from the first post.
Credits @tenuis
I got the same tablet and I also am looking for a root. :/
Another waiting for rooting lenovo owner.
Same here, i was looking for a root guide and i couldn't find anything.
Does anyone else has a problem with long charging times?
Well it charges long and the charge stays long, so no issue here.
Seems that not that many lenovos root easily, but of course this is a pretty new device(?).
leripe said:
Well it charges long and the charge stays long, so no issue here.
Seems that not that many lenovos root easily, but of course this is a pretty new device(?).
Click to expand...
Click to collapse
OK let's try this
Install mtk drivers
Install USB and adb drivers
Install v root 1.7.8
Now tick adb debugging and connect your device to PC run v root and click root button after device get connected to v root
Let me know if you have any issues
All the best ?
Sent from my x604 using Tapatalk
The-Immortal said:
OK let's try this
Install mtk drivers
Install USB and adb drivers
Install v root 1.7.8
Now tick adb debugging and connect your device to PC run v root and click root button after device get connected to v root
Let me know if you have any issues
All the best ?
Sent from my x604 using Tapatalk
Click to expand...
Click to collapse
Can you link all the drivers?
Edit: Vroot link here: http://vrootdownload.info/vroot1.7.8/
leripe said:
Can you link all the drivers?
Edit: Vroot link here: http://vrootdownload.info/vroot1.7.8/
Click to expand...
Click to collapse
If you have win7 or win8/8.1 USB drivers will automatically installed when you connect device
Adb driver I hope this will work
http://adbdriver.com/downloads/
If it fails make a google search am sure you will find it
Sent from my x604 using Tapatalk
The-Immortal said:
If you have win7 or win8/8.1 USB drivers will automatically installed when you connect device
Adb driver I hope this will work
http://adbdriver.com/downloads/
If it fails make a google search am sure you will find it
Sent from my x604 using Tapatalk
Click to expand...
Click to collapse
Installed everything and tried vroot once again (I have tried it before).
Still not rooted. And btw that vroot at least tries to install bunch of bloatware crap on the pc.
Edit:
I would suggest for anyone who installed Vroot to your pc to scan the whole pc after you uninstall the vroot.
Here are the scanning tools:
Malwarebytes
adwcleaner
superantispyware
hitmanpro
leripe said:
Installed everything and tried vroot once again (I have tried it before).
Still not rooted. And btw that vroot at least tries to install bunch of bloatware crap on the pc.
Edit:
I would suggest for anyone who installed Vroot to your pc to scan the whole pc after you uninstall the vroot.
Here are the scanning tools:
Malwarebytes
adwcleaner
superantispyware
hitmanpro
Click to expand...
Click to collapse
I got a successful root by flashing Recovery.rar from lenovo-forums.ru, (it's easy to google, I'm not allowed to post links) with the included SPFlash Tool and afterwards flashing the needed SU binaryies and apk. However, this will mess up the OTA updates, and I can't find the stock recovery again.
Therefore, I really beg anyone having the stock recovery to post it, enabling us to switch between them, whenever we want to apply any OTAs.
Thanks a lot!
nkr said:
I got a successful root by flashing Recovery.rar from lenovo-forums.ru, (it's easy to google, I'm not allowed to post links) with the included SPFlash Tool and afterwards flashing the needed SU binaryies and apk. However, this will mess up the OTA updates, and I can't find the stock recovery again.
Therefore, I really beg anyone having the stock recovery to post it, enabling us to switch between them, whenever we want to apply any OTAs.
Thanks a lot!
Click to expand...
Click to collapse
Well I very highly doubt that there will be any more updates for a device with this price range. And since the next android version is the L version, which requires more work than before.
Edit2: http://forum.xda-developers.com/android/development/guide-lenovo-a3500-h-t2879208 found this. Tested and it works. Will edit it to the first post.
The same as me
i cant flash update.zip from cwm recovery and need to restore the stock recovery ...
I think flashing the stock rom can solve the problem..
.by using the sp flash tool we can select to flash recovery only ....unticking the others except recovery.img ....you just try to download the stock rom and flash the recovery
Same problem
Heya guys!
I have the same problem here.. I can't run the .zip file from the SD card, it get interrupted every time. Any ideas?
drabuaiad said:
The same as me
i cant flash update.zip from cwm recovery and need to restore the stock recovery ...
I think flashing the stock rom can solve the problem..
.by using the sp flash tool we can select to flash recovery only ....unticking the others except recovery.img ....you just try to download the stock rom and flash the recovery
Click to expand...
Click to collapse
I dont know what you two are trying to do but this thread is about rooting the lenovo A3500-FL not about lenovo stock rom.
Rooting..
Yes indeed, that's what I'm trying to do. Rooting the A3500-FL. According to the instructions you need to install the SuperSU from a zip on your SD card. When I try do that it gets interrupted every time. Installing recovery went well. So I'm not getting what I do wrong? Any ideas?
leripe said:
I dont know what you two are trying to do but this thread is about rooting the lenovo A3500-FL not about lenovo stock rom.
Click to expand...
Click to collapse
Mrosenho said:
Yes indeed, that's what I'm trying to do. Rooting the A3500-FL. According to the instructions you need to install the SuperSU from a zip on your SD card. When I try do that it gets interrupted every time. Installing recovery went well. So I'm not getting what I do wrong? Any ideas?
Click to expand...
Click to collapse
http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip and y ou mean this when you talk about update.zip?
And I hope you are using the install zip from sdcard option and the choose zip from sdcard option?
Boot to cmw.
Install zip from sdcard.
Choose zip from sdcard.
browse to your supersu zip and apply.
Now I also update the first post's guide, so you can check that out too.
Thanks for the help so far. But now I'm starting to doubt that the CWM install went successfully. Let me show you a picture of my screen after a failed install of the UPDATE-SuperSU-v2.02.zip -file. (ht_tps://ww_w.dropb_ox.com/s/1wrnatzjk2gn42h/2014-10-09%2008.50.40.png?dl=0) (slightly modified link because of forum rules, just take out the _) I'm using the "apply update from sdcard" option, then I browse to the SuperSU.zip -file and apply it. Then it starts installation, but aborts it in a few seconds. So am I booting to just a normal recovery mode and not CWM? (Sorry if all this seems totally ignorant, I have only flashed roms before, never rooted a new device)
leripe said:
UPDATE-SuperSU-v2.02.zip and you mean this when you talk about update.zip?
And I hope you are using the install zip from sdcard option and the choose zip from sdcard option?
Boot to cmw.
Install zip from sdcard.
Choose zip from sdcard.
browse to your supersu zip and apply.
Now I also update the first post's guide, so you can check that out too.
Click to expand...
Click to collapse
Yup.. This is the problem. The recovery runs fine from Flash Tool and claims it installs it. (Download ok) But I still don't seem to have CWM on the device. It's just normal recovery mode. So any ideas about the CWM-installation? What could possibly go wrong? I get no error messages. Cheers.
//Mike
Mrosenho said:
Thanks for the help so far. But now I'm starting to doubt that the CWM install went successfully. Let me show you a picture of my screen after a failed install of the UPDATE-SuperSU-v2.02.zip -file. (ht_tps://ww_w.dropb_ox.com/s/1wrnatzjk2gn42h/2014-10-09%2008.50.40.png?dl=0) (slightly modified link because of forum rules, just take out the _) I'm using the "apply update from sdcard" option, then I browse to the SuperSU.zip -file and apply it. Then it starts installation, but aborts it in a few seconds. So am I booting to just a normal recovery mode and not CWM? (Sorry if all this seems totally ignorant, I have only flashed roms before, never rooted a new device)
Click to expand...
Click to collapse
thanks ...
It is work fine for me on a3500 fl with 4.4.2 ver a442_01_26_140911_se
Mrosenho said:
Yup.. This is the problem. The recovery runs fine from Flash Tool and claims it installs it. (Download ok) But I still don't seem to have CWM on the device. It's just normal recovery mode. So any ideas about the CWM-installation? What could possibly go wrong? I get no error messages. Cheers.
//Mike
Click to expand...
Click to collapse
Same for me, what about this @leripe ?
EDIT// Oh, It's working now, tried to flash it one more time, then I held a power button until Lenovo logo appeared and then I pressed Vol UP and Vol DOWN and the CWM came in, thank you! Now my tablet is finally rooted
Morning, guys. Yesterday i was trying to flash a stock rom with TWRP. But unfortunately because of a mistake my phone get bricked.
I downloaded the rom, but i forgot to put it on my phone before the wipes, and i did a wipe data
I can enter in TWRP, but my pc dont recognized the drivers, so i cant follow any tutorial. Tried to install the lg drivers, but dont worked.
Someone can help me? Exists some way to recovery it?
LG FlashTool...
Syaa said:
Morning, guys. Yesterday i was trying to flash a stock rom with TWRP. But unfortunately because of a mistake my phone get bricked.
I downloaded the rom, but i forgot to put it on my phone before the wipes, and i did a wipe data
I can enter in TWRP, but my pc dont recognized the drivers, so i cant follow any tutorial. Tried to install the lg drivers, but dont worked.
Someone can help me? Exists some way to recovery it?
Click to expand...
Click to collapse
LG G2 Stock Firmware (Go Back to Stock)
Just search that on here and download necessary files, flash, then use Stump for root and AutoRec for recovery.
---------- Post added at 09:50 AM ---------- Previous post was at 09:45 AM ----------
...After you download your files, DELETE all existing driver files and reboot...THEN re-install your drivers.
To enter download mode for flash, simply hold the volume button up and plug in the usb.
GIVE IT MAYBE 10 min. to install if it doesn't immediately see your phone.
Solved
I tried this but i hadn't time to download a new rom. And had not the drivers too, but i finally fix the problem
I installed the drivers with the ADB driver and used the adb to push my zip file to the storage memory. I cant remember where i found the tutorial cause i did it in the morning. But i can search it again if needed
Thx for the help
next time, buy yourself a mini usb/otg stick (i.e. sandisk dual usb/otg stick)...
if you can enter twrp - just flash the rom from that otg memory stick... no computer or drivers needed...
ok, you need a computer to transfer the rom zip to the memory stick
cheers
DISCLAIMER : You are solely responsible for what you do with this information.
Last Update: Jan.29 (2017)
••••••••••••••••••••••
Custom Recovery
••••••••••••••••••••••
Thanks to @jackeagle for these
TWRP Builds (these ARE compatible)
I used FlashFire to flash the recovery (must be rooted)
See second post for help with Odin.
•••••••••••
Backups
•••••••••••
Notice: THESE ARE TWRP BACKUPS!!
A factory reset will be necessary prior to the restore, or best before it.
Further help in post 2
This debloated (with SuperSU) backup is the latest I have uploaded and it's only around 622mb
A debloated without root version is also abailable.
**by debloated I have removed a bunch of stock Samsung/Google and other applications.
This old 2gb backup has SuperSU and AppOps pre-installed(forgot to remove, has all stock apps)
These other stock partitions include the stock recovery.
I am currently unable (no PC) to produce a flashable zip, if you know what you are doing you can make use of these other files.
This phone needs:
- A permissive kernel
- a deodexed version of this ROM (for xposed)
- cm12/13
- etc etc
If you found this post helpful please hit thank you and leave feedback
Helpful Info:
TWRP NOT RECOGNIZING THE BACKUP???
Stay calm, here's what you do:
zenful said:
∆∆∆make sure to put the files for the these backups in a folder on root of your SD card called TWRP/BACKUPS/<device ID>/BACKUPS/ in order for TWRP to recognize the backups on your device. If you don't know your device ID, just use TWRP and make a backup of whats currently on your device to get the folder with that device ID than place the backup in that location.
Click to expand...
Click to collapse
How to Flash TWRP recovery using Odin said:
Download Odin 3.12.3
Unzip the Odin 3.12.3 .zip file and run/open Odin3 v3.12.3.exe file from the extracted files on your PC.
Make sure you’ve downloaded a Odin flashable TWRP recovery .tar file compatible for your device.
(If applicable) Enable OEM unlock:
Go to Settings » About phone » and tap Build number seven times to enable Developer options.
Go back to main Settings page, scroll to bottom and select Developer options from there.
Under Developer options, look for Enable OEM unlock checkbox/toggle and enable it.
Boot your device into Download mode:
Switch off your device.
Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen.
Press Volume Up on the warning screen to accept it and boot into Download mode.
Once your device is in download mode, connect it to the PC with a USB cable. The Odin window on PC should detect the device and show an “Added!!” message.
Now click on the AP tab on Odin window and select the TWRP recovery .tar file that you downloaded for your device.
└ Note: DON’T play with any other options on the screen. You’re only required to connect your device and select the TWRP recovery .tar file in the AP tab.
Click the Start button on Odin and wait for it to finish the process. Once it has finished successfully, you’ll see a pass message on the Odin screen.
Your device will automatically reboot when Odin is done flashing. You can then disconnect your device.
How to boot into TWRP recovery on a Samsung Galaxy device
Switch off your device.
Press and hold “Home + Power + Volume Up” buttons for a few seconds and as soon as you see your device’ logo on-screen, release three buttons altogether. Your device will boot into TWRP recovery.
source
source
Click to expand...
Click to collapse
Anybody find out about custom recoveries on the SM-978L?
Well I don't know if this helps, but my brother soft bricked his phone while trying to put a custom boot-animation on his phone. I figured out how to fix it by flashing https://download.chainfire.eu/719/CF-Root/CF-Auto-Root/CF-Auto-Root-e5lte-e5lteub-sme500m.zip using odin 3.09. After i flashed it and reset his device it booted back up like normal, and he had root. Just for ****s and giggles i decided to try to flash http://forum.xda-developers.com/gal...ment/recovery-twrp-samsung-galaxy-e5-t3283089. When i tried to reboot into recovery it told me that the seandroid was enforcing. My question is if we flash http://forum.xda-developers.com/gal...nel-permissive-lollipop-stock-kernel-t3387015 will we be able to use this custom recovery. I know it is not built for this specific device, but i was wondering if they were close enough for it to work. Just to afraid to flash it and brick his device with no backup images available.
bndnrd321 said:
Well I don't know if this helps, but my brother soft bricked his phone while trying to put a custom boot-animation on his phone. I figured out how to fix it by flashing https://download.chainfire.eu/719/CF-Root/CF-Auto-Root/CF-Auto-Root-e5lte-e5lteub-sme500m.zip using odin 3.09. After i flashed it and reset his device it booted back up like normal, and he had root. Just for ****s and giggles i decided to try to flash http://forum.xda-developers.com/gal...ment/recovery-twrp-samsung-galaxy-e5-t3283089. When i tried to reboot into recovery it told me that the seandroid was enforcing. My question is if we flash http://forum.xda-developers.com/gal...nel-permissive-lollipop-stock-kernel-t3387015 will we be able to use this custom recovery. I know it is not built for this specific device, but i was wondering if they were close enough for it to work. Just to afraid to flash it and brick his device with no backup images available.
Click to expand...
Click to collapse
Did you ever gather up enough courage to try? It would seem like it should work. I might try it myself, but I cant afford to buy another one if it fails.
JoeSchmo2840 said:
Did you ever gather up enough courage to try? It would seem like it should work. I might try it myself, but I cant afford to buy another one if it fails.
Click to expand...
Click to collapse
I'm the brother bndnrd was referring to.... at this time we haven't tried it but we are almost sure that this straight talk (tracphone) version is the same as the one mentioned. Just like everyone else though I just don't have $200 to test it if it were to fail.
My stupidity in not setting perms right on the boot animation is what caused the soft brick in the first place and apparently.. what ever he did.... was able to boot the phone back up bypassing perms.
If I can pay off a few bills early enough I will set aside some cash and try the build we think will work but that will be at least a month away.
If TWRP actually works after that permissive kernel is installed, we can finally get a stock nandroid backup. That would take the fear away from testing that custom cyanogen build.
JoeSchmo2840 said:
If TWRP actually works after that permissive kernel is installed, we can finally get a stock nandroid backup. That would take the fear away from testing that custom cyanogen build.
Click to expand...
Click to collapse
I ended up making a nandroid backup of this phone and the only thing I couldn't make a backup of was the boot and recovery for it.
You can find out all the partitions you need to use dd with to start a backup by doing
ls -al /dev/block/bootdevice/by-name
Click to expand...
Click to collapse
If I had the resources for a computer I would have uploaded a copy of my stock image, I'll see what I can do about getting one up. Also saw this tool that I thought may be useful for getting a flashable image.
tool-mmcblk0-extractor
Anyways, until next time x.x
Just wanted to post this and see if anyone has theirs different.
Also if someone could decompile the boot.img (I have a link to mine I can send) I'll work on a passive kernel for us.
допоможіть! потрібна прошивка для мого sm-s978l 4g
Took and wiped the system and data. now loaded only Samsung logo and TWRP 3.0.2
Or maybe someone has a backup of SM-S978L 4G?
oleksandr.lutsyk said:
Took and wiped the system and data. now loaded only Samsung logo and TWRP 3.0.2
Or maybe someone has a backup of SM-S978L 4G?
Click to expand...
Click to collapse
What do you need a backup of? I haven't uploaded data or system partitions yet but I have the rest.
Also, you successfully got TWRP 3.0.2 working? If so please share the details on how please
[via Tapatalk]
Help! Need firmware for my SM-S978L [5.0.2] Straight Talk's E5
Took and wiped the system and data. now loaded only Samsung logo and tvrp
Or maybe someone has a backup of SM-S978L [5.0.2] Straight Talk's E5?
---------- Post added at 10:22 PM ---------- Previous post was at 10:19 PM ----------
I need backup or firmware....
---------- Post added at 10:49 PM ---------- Previous post was at 10:22 PM ----------
zenful said:
What do you need a backup of? I haven't uploaded data or system partitions yet but I have the rest.
Also, you successfully got TWRP 3.0.2 working? If so please share the details on how please
[via Tapatalk]
Click to expand...
Click to collapse
androiding. how/how-to-install-twrp-recovery-using-odin/
If you do this it will be possible. Make a backup for me)
updated main post, will try uploading backup by tonight
zenful backup request
zenful said:
UPDATED dec 8 2016
#############
TWRP thanks to user @jackeagle for providing us with some TWRP builds for the E5.
Jackeagle TWRP build (I believe he has updated versions but this is the one I KNOW works for this phone)
https://www.androidfilehost.com/?fid=24052804347821291
Other builds
http://forum.xda-developers.com/showpost.php?p=62973386&postcount=2
http://androiding.how/galaxy-e5-twrp-recovery/
http://androiding.how/how-to-install-twrp-recovery-using-odin/
####
You can also use FlashFire to flash the recovery as well (must have root first)
Have fun guys!
#edit dec11.2016
Have a twrp backup of the /system partition and a dump of the other partitions as well, just get up with me on here.
Click to expand...
Click to collapse
Hello, I currently have the twrp running but for some reason google play services has stopped working has blocked me our of many of my apps and functions on the phone. The only backup I have at all has this occurring may I please use your backup and partitions so I can have a working phone for the upcoming holiday.
El_Ogan said:
Hello, I currently have the twrp running but for some reason google play services has stopped working has blocked me our of many of my apps and functions on the phone. The only backup I have at all has this occurring may I please use your backup and partitions so I can have a working phone for the upcoming holiday.
Click to expand...
Click to collapse
Hey @El_Ogan check your inbox, or the first post to this thread for the link. Hope it helps, happy holidays
??/
zenful said:
Hey @El_Ogan check your inbox, or the first post to this thread for the link. Hope it helps, happy holidays
Click to expand...
Click to collapse
i have this phone and twrp works but nothing eles is this a complet back up i can just restore from twrp or is there something eles i am in need of to get this phoe working its a sm-s978l but shows e500h when i plug it in to my computer ??? so i am really confused
bullfrog83 said:
i have this phone and twrp works but nothing eles is this a complet back up i can just restore from twrp or is there something eles i am in need of to get this phoe working its a sm-s978l but shows e500h when i plug it in to my computer ??? so i am really confused
Click to expand...
Click to collapse
Hey no worries and yes it's just a full backup from TWRP just stupid in the sdcard and navigate to TWRP's restore section and it should auto find it. Any other files needed I'll also have, but this a bit a flashable zip or flashable via Odin, and
I imagine Odin says that after you flashed TWRP right? If so that's because that's what the TWRP was made for so it seems like Odin checked the recovery.
If it said that BEFORE you flashed it, that's very intriguing and helpful to me
thank you very much i really like this phone maybe ill be able to use it again havent went back to odin since i put twrp on the phone but when i plug into my computer it says e500h in window on my computer when in twrp on the phone used to say sm-s978l so im not sure just the way it is introduced by windows
bullfrog83 said:
i have this phone and twrp works but nothing eles is this a complet back up i can just restore from twrp or is there something eles i am in need of to get this phoe working its a sm-s978l but shows e500h when i plug it in to my computer ??? so i am really confused
Click to expand...
Click to collapse
bullfrog83 said:
thank you very much i really like this phone maybe ill be able to use it again havent went back to odin since i put twrp on the phone but when i plug into my computer it says e500h in window on my computer when in twrp on the phone used to say sm-s978l so im not sure just the way it is introduced by windows
Click to expand...
Click to collapse
I feel ya just let me know if you need any more help and goodluck
Hello guys.
I have successfully ported TWRP 3.0.0-0 for our Smart Prime 6.
It's 100% working !!
There are NO BUGS !! :good:
DOWNLOAD
NEW LINK: DOWNLOAD
________________________________________
How to install
Via app:
1) Download TWRP 3.0.0-0 from the link above and place it on internal storage of your phone.
2) Download Flashify app from Google Play Store.
3) Open Flashify app.
4) Grant root permissions.
5) Click "Recovery image" and then click "Choose a file"
6) Navigate to the folder where you placed TWRP 3.0.0-0 and choose the .IMG file.
7) Press "Yup!" button and wait.
8) After a while the phone will require reboot. So click "reboot" button.
9) Phone will reboot and automatically boot into TWRP, so you can press reboot to system.
10) Enjoy!
Special thanks to Oneb1t for modded .fstab file! :highfive:
edit: you can use Flashfire app too instead of Flashify, but it's not recommended, because the latest version of the Flashfire app is not flashing properly.
Brilliant! Thank you so much! Do you know any custom ROM what is better than the factory ROM?
There is no custom ROM for this phone yet.
But I'm trying to make LITE ROM.
Adreno306™ said:
There is no custom ROM for this phone yet.
But I'm trying to make LITE ROM.
Click to expand...
Click to collapse
Do you think it's easier/possible to adapt a ROM from a similar device like say, the Alcatel
Pop 2 (5) Premium ? I don't know if there's any ROM for that phone tho, but since it's branded as Alcatel you might get more support from the community here than by using Vodafone's name.
Hello, Demonlord6.
I have tried to make a stock flashable ROM via dumping the system folder and the boot.img file, but without success.
It does not boot properly.. when I tried to flash it without dalvik/system wipe everything was as before.
When I tried to wipe /system and dalvik first and then flash the ROM, it causes bootloop.
So now I'm trying to fix this issue..
I don't know where the problem is.
So when this issue will be solved I will try to build a ROM from Alcatel phones with same specs.
Adreno306™ said:
Hello, Demonlord6.
I have tried to make a stock flashable ROM via dumping the system folder and the boot.img file, but without success.
It does not boot properly.. when I tried to flash it without dalvik/system wipe everything was as before.
When I tried to wipe /system and dalvik first and then flash the ROM, it causes bootloop.
So now I'm trying to fix this issue..
I don't know where the problem is.
So when this issue will be solved I will try to build a ROM from Alcatel phones with same specs.
Click to expand...
Click to collapse
Hey, Andreno306
I don't know much about Rom's in that level of expertise I'm afraid :/ but I did some digging and came across this simple tutorial on XDA:
http://forum.xda-developers.com/showthread.php?t=2387941
I imagine it does not work for every single device out there, at least not with modifying stuff after, but it might be a good starting point I think, in fact I would try to actually make one myself had I a working PC currently at home. But even if I did I had no way of testing it because this is currently my daily driver phone.
Just wanted to say that I'm also very interested in getting a slim ROM for this device. I can't offer any expertise I'm afraid! Just wanted to show that there are people interested in your project.
:highfive:
Stock Kernel
Thanks, it works great.
This is little off-topic but does anyone has the stock kernel, i flashed NeoKernel but it is not that good and i forgot to make a backup do can anyone please link me to the stock kernel?
vojta_horanek said:
Thanks, it works great.
This is little off-topic but does anyone has the stock kernel, i flashed NeoKernel but it is not that good and i forgot to make a backup do can anyone please link me to the stock kernel?
Click to expand...
Click to collapse
I have one
https://mega.nz/#!tMJD3B4T!f6m2ELYCVupqGCcN2aGbkrNzEqijLu7au-7usEfeVL0
But I recommend to restore it with the flashify app, because that's how the backup was made.
If, for some reason, you don't/can't restore it, then you can always try Sugar on the PC which basically restores everything to factory settings (recovery, kernel, etc, it all gets reset)
Demonlord6 said:
I have one
But I recommend to restore it with the flashify app, because that's how the backup was made.
If, for some reason, you don't/can't restore it, then you can always try Sugar on the PC which basically restores everything to factory settings (recovery, kernel, etc, it all gets reset)
Click to expand...
Click to collapse
Restored and my phone keeps turning off after boot(once i saw the turn off screen, other times it just vibrates at boot screen), isnt it the wrong file? (flashed wia flashify)
I was able to restore the boot from TWRP (lucky i made a backup this time)
vojta_horanek said:
Restored and my phone keeps turning off after boot(once i saw the turn off screen, other times it just vibrates at boot screen), isnt it the wrong file? (flashed wia flashify)
I was able to restore the boot from TWRP (lucky i made a backup this time)
Click to expand...
Click to collapse
Sorry there about the bootloop but glad u could restore it from TWRP, maybe it was because we have different ROM versions ?
Demonlord6 said:
Sorry there about the bootloop but glad u could restore it from TWRP, maybe it was because we have different ROM versions ?
Click to expand...
Click to collapse
I got this one: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/#
vojta_horanek said:
I got this one: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/#
Click to expand...
Click to collapse
Yeap, that's not the same version as my ROM, mine is not 130FNN etc. Maybe that's why it didn't work
Enviado do meu GT-S5280 através de Tapatalk
Sorry for the stupid question but... does it works on Smart Prime 7 too?
Has anyone installed that linked ROM? It seems to be what we are looking for... a slim debloated rom.
I presume we need to be rooted, install this TWRP, then flash that ROM?
It mentions unlocking the bootloader, I dont think I've seen any info anywhere about unlocking the bootloader.
Can anyone give a quick lowdown on all the steps required to install that ROM please?
Hi everyone, I discovered that Elephone Trunk and Smart Prime 6 have (almost) identical specs: https://www.devicespecifications.com...ison/c584481c6
So it would be great to "port" (or build ?) the official Nougat-OmniROM for Trunk to VF-895N: http://dl.omnirom.org/trunk/
Last but not least, here's official Vodafone Smart Prime 6 sources: Vodafone_Smart_prime_6_20150413.tar.xz
TWRP for vodafone smart max 4 990N (coolpad 8890u).
I tried this recovery image for vodafone smart max 4 990N (coolpad 8890u).
The phone is in a bootloop state. I think i have usb debugging enabled already.
So, in fastboot mode i can see the device in my pc in adb fastboot cmd.
Im trying to ''fastboot boot recovery.img" but it stops in ''booting..''.
Dont know whats the problem but for sure i can not find a specific twrp image for this device.
If i enter fastboot oem device-info it says ''(bootloader) Device unlocked: true''.
Any ideas ?
hi i was wondering if you could share how you did this or if you can make one for the Vodafone smart n9 (VFD720) it would help a lot of people out looking for this
Needed to root a Vodafone Smart Prime 6 (VF 895N) (got it from a friend because it became unresponsive from all the updated google play stuff ) to get linux-deploy running. Just wanted to leave a big thank you here for Adreno306 for his TRWP 3.0.0-0. it did the job very well!
Only the procedure to get it installed differed quite a bit for me, since Flashify is no longer available.
I wanted to preserve boot and just flash trwp to recover, what worked quite well.
The first thing I did was to boot the phone manually in recovery mode (Power+Vol up) and reset it to factory settings from there. It takes a little while. Then follow the setup, go to phone settings, enable developer mode and set usb debugging. If "unlock oem" is not available there, reboot into recovery again, set unlock there and reboot into bootloader.
The prerequisites are adb and fastboot, both must work. Means adb devices and fastboot devices must show the phone. What can make problems under win10 as it sometimes does not detect the phone in bootloader mode. An actual google usb driver is needed, as provided by google.
For me adb worked well, but when rebooted into bootloader with adb reboot bootloader, fastboot didnt detect the phone. With the phone still connected, the windows device manager showed an unknown device with and exclamation mark (!). Right click, install driver, select driver manually, select driver from device list, mark all devices (first entry) and click "disk", then point to the usb driver director and select "ADB fastboot driver". ( A more comprehensive description is available here )
Once adb and fastboot detect the device, it is time to prepare it. Boot to system (normal operation) first. Make sure that the TRWP 3.0.0-0.img is renamed to trwp.img and then
adb reboot bootloader
fastboot devices
fastboot oem unlock
fastboot boot trwp.img
Now the phone should show the trwp menu, set it up to root the phone and install SuperSU. Reboot into bootloader and
fastboot flash recovery trwp.img
fastboot reboot
Verify with adb reboot recovery, you should see trwp now. Reboot to system.
Now finally go into the app selector, start SuperSU, and root the phone. SuperSu uses trwp recovery mode to install its image and root is done.
Again, big thanks for providing the TRWP image!
Adreno306™ said:
Hello guys.
I have successfully ported TWRP 3.0.0-0 for our Smart Prime 6.
It's 100% working !!
There are NO BUGS !! :good:
DOWNLOAD
NEW LINK: DOWNLOAD
________________________________________
How to install
Via app:
1) Download TWRP 3.0.0-0 from the link above and place it on internal storage of your phone.
2) Download Flashify app from Google Play Store.
3) Open Flashify app.
4) Grant root permissions.
5) Click "Recovery image" and then click "Choose a file"
6) Navigate to the folder where you placed TWRP 3.0.0-0 and choose the .IMG file.
7) Press "Yup!" button and wait.
8) After a while the phone will require reboot. So click "reboot" button.
9) Phone will reboot and automatically boot into TWRP, so you can press reboot to system.
10) Enjoy!
Special thanks to Oneb1t for modded .fstab file! :highfive:
edit: you can use Flashfire app too instead of Flashify, but it's not recommended, because the latest version of the Flashfire app is not flashing properly.
Click to expand...
Click to collapse
Hi, I would like to try your tutorial but I can't root this phone (which is an important step in the tutorial), is there any way someone could help me??
Thanks
Hey guys,
I hope someone can come to the rescue with this matter. I did an OTA update on my LG G2 (D803) and it booted to twrp option menu. I downloaded the stock firmware (which is a ".kdz" file) for the phone but can't find a way to install it on the phone since the PC is not connecting to it neither does it have external memory. I played around the options like restore, advanced but it seems empty. I can't even turn off the device with the power button. What can I do? Please help
rosh88 said:
Hey guys,
I hope someone can come to the rescue with this matter. I did an OTA update on my LG G2 (D803) and it booted to twrp option menu. I downloaded the stock firmware (which is a ".kdz" file) for the phone but can't find a way to install it on the phone since the PC is not connecting to it neither does it have external memory. I played around the options like restore, advanced but it seems empty. I can't even turn off the device with the power button. What can I do? Please help
Click to expand...
Click to collapse
OTA updates don't work when custom recoveries are installed. The device would be bricked. Sorry you found out the hard way. If you can boot into TWRP, you can download a ROM and Gapps. Buy the usb flash drive that has both USB point and Android 3.0 point. Copy the downloaded ROM unto it, slot into the charging port of the phone, boot into recovery. It should detect the usb flash, navigate to downloaded ROM and flash. This would work if you can boot into TWRP. Hope it works. Give feedback. Good luck
Sent from my Motorola Droid Turbo
abbykay said:
OTA updates don't work when custom recoveries are installed. The device would be bricked. Sorry you found out the hard way. If you can boot into TWRP, you can download a ROM and Gapps. Buy the usb flash drive that has both USB point and Android 3.0 point. Copy the downloaded ROM unto it, slot into the charging port of the phone, boot into recovery. It should detect the usb flash, navigate to downloaded ROM and flash. This would work if you can boot into TWRP. Hope it works. Give feedback. Good luck
Sent from my Motorola Droid Turbo
Click to expand...
Click to collapse
What about ADB or terminal command? I see it under the "Advanced" Menu in TWRP?
If you can do into download mode and allready have KDZ file just use flash tool 2014 to go back to stock (search here for "going back to stock:" post)
Also.. if you can send data over usb cable, try to use sideload to upload custom rom, or like stated before, use USB stick with OTG
You can also try this one: https://forum.xda-developers.com/showpost.php?p=71044359&postcount=2
or this as a last case scenario: https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
sakej said:
If you can do into download mode and allready have KDZ file just use flash tool 2014 to go back to stock (search here for "going back to stock:" post)
Also.. if you can send data over usb cable, try to use sideload to upload custom rom, or like stated before, use USB stick with OTG
You can also try this one: https://forum.xda-developers.com/showpost.php?p=71044359&postcount=2
or this as a last case scenario: https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Click to expand...
Click to collapse
I have moved the kdz file to a usb stick and attached a usb stick to an OTG. But where in TWRP do I go to read the usb stick and how can I complete the process? Also I did try the SRK tool from on the links you provided. The phone is not detecting the computer while plugging in the usb while the phone is on TWRP and the computer makes a noise when the usb is connected but srk tool is not reading the phone.
You can't flash kdz with twrp or other recovery! Download custom Rom and gapps or a debloated stock rom and flash it with twrp. The custom Roms are zip files. Do you have twrp installed?
Gesendet von meinem LG-D802 mit Tapatalk
Yes you CANNOT flash KDZ with TWRP you need FLASH TOOL 2014. Download flash tool 2014 (search it on xda) than, in your G2 go into download mode, connect your phone to pc with usb cable and than run flash tool to flash kdz