Hello, I'm on stock, rooted, MHC19I with xposed - I cannot get this Kingston flash drive to be recognized by the phone, there is no notification that it is plugged in. I have formatted it to both FAT32 & NTFS. Also I noticed my phone no longer states "Charging Rapidly" on the lockscreen, when it would before. I tried formatting and loading Pure Nexus but it wouldn't recognize anything plugged in also. Any ideas?
Related
My AT&T sgh 1337 Galaxy s4 has been a great phone, it was Loki'd back before the bootloader lock OTA's hit and I've been running CM11's latest milestone releases.
Lately I have had issue with my USB jack. When I would plug it in, I would just get an Error code 43 Unknown Device in windows, no device detected in linux & mac. I tried 3 different USB cables. I cleaned out the USB jack, didn't help. I did notice the interior of the jack was a bit worn and torn. It charges fine.
I went ahead and ordered a new USB jack/microphone board, verified the new part is specific and exact to the sgh-1337 model and installed it.
Plugged into a charger and tested, charging works, ~1300 mah draw on a 1.4amp charger. Looks good.
Plugged into a PC and immediately got Error code 43 USB device unrecognized. Still doesn't work. I changed USB modes in Settings>Storage>menu and, nothing. I enabled and disabled USB debugging several times. I've tested my machine with all samsung & ADB drivers installed and fresh machines, nothing. (Windows made the USB connect/disconnect sound between switching modes every time)
I installed Drivedroid (very sweet app for hosting disk images over USB) and used its settings panel to change USB modes, every single USB mode reports error 43.
Booting up into Recovery and mounting USB mass storage mode, same thing Error 43.
Booting into Download mode: Error 43.
USB OTG cable with mouse plugged in: nothing.
Is it possible that the USB controller on my phone's main board died? I hope not, that's unfortunate. It'd be hard to find a bootloader-unlocked motherboard replacement.
I read that an HTC user had the exact same problem, he reflashed his bootloader image from SD card and BAM, usb came alive again. I don't think that'd be a possibility with a samsung device though... hmm. Bummer, anyone think they can help?
I appreciate you reading.
wow, sorry to here that--could be hardware, you did about everything you could do--
Here are Google links which I am sure you already looked into
https://www.google.com/?gws_rd=ssl#q=usb+code+error+43+fix
Wild ideas--wipe your internal, reformat external or boot without it
Odin the MDL tar back to stock, keeping same bootloader
Odin and upgrade to NC1 with new bootloader
Use wifi apps for transfers
Not much help I know--just throwing stuff out there--:good:
Good Luck
Worst case lots of new phones out this fall--
Hi i have a nexus 7 (2012) everything was working fine until android 5. The device was slow and almost unusable. Then the 5.0.2 update came out and guess what? I updated it and now my laptop wont recognize the device so i tried a different cable and nothing. I plugged the nexus 7 in my second computer and nothing not even the sound that means you plugged something in the usb port. So i went to my brothers house and tried his computer.... the same... nothing. We plugged his nexus 7 (2012) 5.0.2 wich is the exact same device as mine and it works so we thought that it was the usb connector on the device and we switched my connector with his....NOTHING happens. computer wont recognize the device, no sound, no pop-up, no ADB detection. Does anyone have the same problem or a solution on how to downgrade 5.0.2 back to 4.4 without usb cable?
Thank you
Did you tried out to start n7 into fastboot mode and recovery mode?
Is usb not available also there?
fastboot and recovery mode also has no USB. absolutely nothing happens. when i connect the device it charges but the lightning icon does not appear on the battery in the status bar. and its not the usb port on the N7 i changed it.
?????????????????
Same here
I have the same Problem - a N7 GSM with 5.0.2 and no communication via USB.
I have tried different computers with Win7 and Ubuntu14.10. As well as differnt cables. (And all combinations of that work with my HTC M7, by the way)
Under Linux, not even lsusb shows the device, or dmesg shows any connection to a usb device.
To be completly honest, I did not give much love to my N7, I have been using it hardly. But when I did, I have been flashing some differnt Roms and testing different bootloaders so this might be some kind of my fault.
i updated to 5,1 and still the same problem so i assume its hardware related. but i know it is not the USB connector because i tried it on my brothers N7. and it works
Mine is quirky, comp recognizes it and can order boot but sideload and push to device don't work. Its odd.
Hi,
USB OTG on my Verizon Droid Turbo 2 with Android 6.0 is not working with any USB device I've tried including mouse, keyboard, or thumb drive. The DT2 doesn't respond nor even appear to supply power to any of the devices I attach.
The DT2 Micro-USB otherwise works for charging and connecting to my PC. I've tried multiple cables listed on Amazon as "(10-Pack) BuyCheapCables 6" Micro-USB OTG (On The Go) to USB 2.0 Adapter Cable" that have worked well for me in the past.
I ran the app USB OTG Checker from Google Play with USB OTG System Result = "Your Device OS has USB OTG API !" and USB OTG Signal Result = "System NOT Detect USB OTG Signal"
Frustratingly, youtube videos seem to show OTG success in similar scenarios. So, please any advice would be appreciated...
I'm having a related problem. Otg-usb works when phone is booted normally but when in recovery with TWRP 2.8.7.1 I try to back up my device, I see otg-usb, but can not select it as the target destination. It is formatted Fat32. I try to reformat it in TWRP and it can't write to the media. Get an error to that effect. Note5 MOAR Rom 5.1.
Sent from my SM-N920P using XDA-Developers mobile app
Mediatech1 said:
I'm having a related problem. Otg-usb works when phone is booted normally but when in recovery with TWRP 2.8.7.1 I try to back up my device, I see otg-usb, but can not select it as the target destination. It is formatted Fat32. I try to reformat it in TWRP and it can't write to the media. Get an error to that effect. Note5 MOAR Rom 5.1.
Click to expand...
Click to collapse
My issue seems hardware related in that any USB device I try to connect gets no response or power from the phone.
I spoke to a few sources on this and most helpfully went to my local VZ and tried on another DT2. Looks to have worked and I'm hoping the new DT2 they're sending me will solve it. A Samsung S7 also worked.
I just loaded up my LG V20 with the AOKP android 7.1, I plugged in my USB OTG ( SD micro card installed in this) and it will not even power on at all. I rebooted into TWRP, and it works just fine there, I can read, mount and unmount, no troubles. booted to system, but no power at all to the adapter plugged into the usb-c / charging port. My reader is a couple of years old, do you think it might just not be compatible with my new phone? Is there a setting I might be overlooking to enable this to work? Any ideas as to if it might be a hardware of software issue? Thanks.
my nexus 6 will only charge no data transfer and pc wont recognize it. When i connect it to the pc it goes staright to charge mode and the usb trident symbol doesnt ever appear. In developer options usb configure is stuck in "charge mode" only. Ive tried different roms from pie to mm . i reinstalled bootloader and radio, tried twrp back ups and still the same. Had new charging port put in phone thinking that was the problem but didnt help. Ive searched google but couldnt find anything. Any Ideas, really appreciate it thx
When I installed stock rom which was android 7.1 it changed phone back to encrypted. Now i have to format internal drive in order to install a pie rom. Does anyone think that formatting internal drive might fix problem with not being able to do anything but charge phone from usb port, because if that doesnt fix it there would be no way for me to put any rom on my internal drive to install it.. Does anyone have any suggestions
kanpol said:
When I installed stock rom which was android 7.1 it changed phone back to encrypted. Now i have to format internal drive in order to install a pie rom. Does anyone think that formatting internal drive might fix problem with not being able to do anything but charge phone from usb port, because if that doesnt fix it there would be no way for me to put any rom on my internal drive to install it.. Does anyone have any suggestions
Click to expand...
Click to collapse
Just to double check that adb devices shows your serial #. If not, it may be a driver issue.
Computer doesn’t see it, when I enter adb devices it doesn’t show up. Nothing shows up in device manager either: Also when I enter fast boot on the phone “power lower volume button” it says “connect usb data cable” I’ve trued numerous cables that work fine on my other phone. So it’s not the cable. After I plug them into phone it still says connect usb data cable.
I also have a thumb drive with a micro usb connecter that used to work on the phone. Now the phone doesn’t see it when you plug it in to the phone. But it works on my other phone so it’s not the thumb drive
kanpol said:
I also have a thumb drive with a micro usb connecter that used to work on the phone. Now the phone doesn’t see it when you plug it in to the phone. But it works on my other phone so it’s not the thumb drive
Click to expand...
Click to collapse
It sounds like a driver problem. Is it a windows PC? Have you tried installing the Google USB driver? I've had similar issues, and reinstalling the driver(s) has worked for me.
It’s windows 10 and I reinstalled driver, other thing is in my car when I plug it in to the usb slot for android auto, it doesn’t show up in my car either and it used too.
It’s like the phone is stuck in charge only mode and I can’t get it out of that
kanpol said:
It’s like the phone is stuck in charge only mode and I can’t get it out of that
Click to expand...
Click to collapse
When you connect your other phone to your PC, does its serial # show up in adb devices? If so, I'm out of suggestions.
1 more thing.. Have you enabled USB debugging in Developer Options?
Other phones shows up and in devolpers options in “usb configuration” you can set it to mtp but when you hit enter it goes back to charge only. I was on” aiop 14.0 rom” when it happened but it was working fine on that rom , then one day android auto kept saying connect usb, so when I got home I tried to plug it into pc and nothing. So I replaced charging port thinking that was problem but it didn’t help. Flashed other roms and even went back to stock, reflashed bootloader nothing helped. I was hoping someone here had seen this before cause I googled it and nothing like this could I find
kanpol said:
Other phones shows up and in devolpers options in “usb configuration” you can set it to mtp but when you hit enter it goes back to charge only. I was on” aiop 14.0 rom” when it happened but it was working fine on that rom , then one day android auto kept saying connect usb, so when I got home I tried to plug it into pc and nothing. So I replaced charging port thinking that was problem but it didn’t help. Flashed other roms and even went back to stock, reflashed bootloader nothing helped. I was hoping someone here had seen this before cause I googled it and nothing like this could I find
Click to expand...
Click to collapse
Forget USB configuration for a minute. In developer options, under debugging, USB debugging needs to be enabled.
usb debugging is enable also. even tried turning it off and back on again, didnt help.
you know when you connect phone to pc and you normally see the usb trident symbol on your phone, well when i connect it to the pc i dont see that symbol it just goes straight to charging but even charging i should still see the usb symbol and i dont,