Setting up, rooted, CM 12.1, no play store? - M.O.J.O. General

I have rooted my mojo with towelroot v1, installed TWRP, flashed CM 12.1.
Then rebooted.
In the 12.1 install instructions it says "Install the ROM first then install the google apps". How do I install the google apps? Was I supposed to do that in recovery? Where do I get the gapps?
What do I need to do? Thanks.

Phoenix4848 said:
I have rooted my mojo with towelroot v1, installed TWRP, flashed CM 12.1.
Then rebooted.
In the 12.1 install instructions it says "Install the ROM first then install the google apps". How do I install the google apps? Was I supposed to do that in recovery? Where do I get the gapps?
What do I need to do? Thanks.
Click to expand...
Click to collapse
You should be able to find gapps from the following post: http://forum.xda-developers.com/showpost.php?p=65432534&postcount=301
You flash gapps from inside TWRP right after you flash CM, selecting the gapps zip you downloaded just as you did with the CM Rom. If memory serves, you can probably go back into TWRP and flash gapps without having to re-flash CM.
Sent from my C6730 using Tapatalk

TU
krikit said:
You should be able to find gapps from the following post: http://forum.xda-developers.com/showpost.php?p=65432534&postcount=301
You flash gapps from inside TWRP right after you flash CM, selecting the gapps zip you downloaded just as you did with the CM Rom. If memory serves, you can probably go back into TWRP and flash gapps without having to re-flash CM.
Sent from my C6730 using Tapatalk
Click to expand...
Click to collapse
Thanks, I made a little progress since I posted this. I found gapps 5.0 (someone elsewhere suggested 5.0 micro would be best for mojo).
Next question was 1) How to I re-enter recovery and can 2) Can I flash gapps after CM has already unpacked itself or whatever it does on initial run? You answered #2.
Is the only way to re-enter recovery by using some sort of quick reboot apk? Is there a combination of buttons on the controller you can press or something like that? Thanks again for your help.

Phoenix4848 said:
Thanks, I made a little progress since I posted this. I found gapps 5.0 (someone elsewhere suggested 5.0 micro would be best for mojo).
Next question was 1) How to I re-enter recovery and can 2) Can I flash gapps after CM has already unpacked itself or whatever it does on initial run? You answered #2.
Is the only way to re-enter recovery by using some sort of quick reboot apk? Is there a combination of buttons on the controller you can press or something like that? Thanks again for your help.
Click to expand...
Click to collapse
There is no button combo to do that, and of course the MOJO itself has no buttons (at least not where you can get to them). You can also enter recovery from fastboot, but installing quick reboot is easier. Just search the internet until you can find a download link, make sure you have "unknown sources" enabled in security settings, and install it from your download folder.
You should have no problems flashing GApps after CM is running, but if you do simply start over.
I think you'll have poor luck trying to flash a 5.0 GApps on CM12.1 though, you'll need a 5.1 file. I recommend flashing a pico version, then installing anything else you need (probably at least Google Play games) through Play Store.
http://opengapps.org/
If you need to enter recovery without the reboot app, I recommend reading the thread on recovery in the dev section again:
http://forum.xda-developers.com/mad...overy-twrp-2-8-2-0-recovery-mad-catz-t2973640

Solved.
After a failed attempt with a Quick Reboot apk I downloaded from somewhere (It didn't do the reboot part) I was able to find a flashify apk that allowed me to re-flash recovery and reboot into it.
Turns out you need 5.1 micro gapps. For lollipop 5.1. Who knew.

what did you use to root from 12.1 ?
i tried towelroot and many others. cant get any root with anything...
EDIT (its around 10/half at night in Germany)
OOOH,OOOOHHHHHH...ARE YOU ****INKKONG KIDDING ME ???
Root can be set in Developer settings.
I cant believe i missed it and wasted a complete day struggling in the internetz.
for the sake of **** - im done....... **** this **** ****

alliolli said:
what did you use to root from 12.1 ?
i tried towelroot and many others. cant get any root with anything...
EDIT (its around 10/half at night in Germany)
OOOH,OOOOHHHHHH...ARE YOU ****INKKONG KIDDING ME ???
Root can be set in Developer settings.
I cant believe i missed it and wasted a complete day struggling in the internetz.
for the sake of **** - im done....... **** this **** ****
Click to expand...
Click to collapse
Never so angry as when you're angry at yourself. Read the thread in the dev section...

alliolli said:
what did you use to root from 12.1 ?
i tried towelroot and many others. cant get any root with anything...
EDIT (its around 10/half at night in Germany)
OOOH,OOOOHHHHHH...ARE YOU ****INKKONG KIDDING ME ???
Root can be set in Developer settings.
I cant believe i missed it and wasted a complete day struggling in the internetz.
for the sake of **** - im done....... **** this **** ****
Click to expand...
Click to collapse
Haha. Yeah I was about to respond to that, but you beat me to it.

Related

[Q] Regretting upgrading to 4.4 on Nexus4

Need help...
I installed the new PA AOSP 4.4 on Mako. I had not installed GAPPS. Started the phone up into 4.4, thought "don't like this", turned off went into CWM, went into recovery and was hit with a knocked over android with the red warning sign. I have tried multiple times without success to get into recovery.
I downloaded Flashify and it says I do not have SU permission on your device. Downloaded superSU and was greeted with the message "There is no SU binary installed, and SuperSU cannot install it. This is a problem!"
How do I get back to 4.3? is it possible? or do I have to wait for a root now? Is there any way just to get GAPPS or the Playstore?
Find efrant's guide on flashing back to stock using fastboot. It'll get you 100% back to stock, and teach you the right way to do it.
username8611 said:
Find efrant's guide on flashing back to stock using fastboot. It'll get you 100% back to stock, and teach you the right way to do it.
Click to expand...
Click to collapse
Can you do me a huge favor and find it, I have no idea which one I am looking at.
PhysicsNerd said:
Need help...
I installed the new PA AOSP 4.4 on Mako. I had not installed GAPPS. Started the phone up into 4.4, thought "don't like this", turned off went into CWM, went into recovery and was hit with a knocked over android with the red warning sign. I have tried multiple times without success to get into recovery.
I downloaded Flashify and it says I do not have SU permission on your device. Downloaded superSU and was greeted with the message "There is no SU binary installed, and SuperSU cannot install it. This is a problem!"
How do I get back to 4.3? is it possible? or do I have to wait for a root now? Is there any way just to get GAPPS or the Playstore?
Click to expand...
Click to collapse
so what happened is you did everything wrong. first off, you should have flashed the rom, gapps, and supersu 1.65(for root). and that android laying there is the stock recovery. you lost it because the rom replaced your recovery with the stock recovery. all you have to do is flash a custom recovery via fastboot, then flash supersu 1.65 in the custom recovery that you just installed. next time, figure out what you have to do before doing it.
simms22 said:
so what happened is you did everything wrong. first off, you should have flashed the rom, gapps, and supersu 1.65(for root). and that android laying there is the stock recovery. you lost it because the rom replaced your recovery with the stock recovery. all you have to do is flash a custom recovery via fastboot, then flash supersu 1.65 in the custom recovery that you just installed. next time, figure out what you have to do before doing it.
Click to expand...
Click to collapse
Thank you so very much, I thought I was downloading PA 3.99 just under a different name which is why it kind of shocked me when GAPPS 4.3 said it couldn't install.
I really appreciate your time, I was panicking here for a second.
PhysicsNerd said:
Thank you so very much, I thought I was downloading PA 3.99 just under a different name which is why it kind of shocked me when GAPPS 4.3 said it couldn't install.
I really appreciate your time, I was panicking here for a second.
Click to expand...
Click to collapse
na, this is a simple faux pas made by hundreds of thousands(it seems) over my android years. and its not even a big error, its easily fixed, but it does freak out way too many
simms22 said:
na, this is a simple faux pas made by hundreds of thousands(it seems) over my android years. and its not even a big error, its easily fixed, but it does freak out way too many
Click to expand...
Click to collapse
Happy that there is a solution. I'm having the same exact issue and i don't know flashing the recovery image in fastboot mode. If you could put up a link or a video on how to go about it , that would be great
Trying to push recovery.img using fastboot , but gettin "waiting for device"error. should have just let the 4.3 stay. damn. no gapps. no recovery .
747nemesis said:
Trying to push recovery.img using fastboot , but gettin "waiting for device"error. should have just let the 4.3 stay. damn. no gapps. no recovery .
Click to expand...
Click to collapse
try this http://forum.xda-developers.com/showthread.php?t=2015469 or other toolkit
PhysicsNerd said:
Need help...
Started the phone up into 4.4, thought "don't like this"
Click to expand...
Click to collapse
Just out of curiousity, why didn't you like it? You can always get a different launcher
Simplest way to fix it is DL one of the nexus tool kits. Me I use http://forum.xda-developers.com/showthread.php?t=2171332 and its that easy why make it harder than it is or read the full op
acultr said:
try this http://forum.xda-developers.com/showthread.php?t=2015469 or other toolkit
Click to expand...
Click to collapse
tried that . it is saying fastboot device not found. what to do now?
747nemesis said:
tried that . it is saying fastboot device not found. what to do now?
Click to expand...
Click to collapse
properly installed the driver?
Problem Flashing
Hi, i have a problem flashing rastakat. To Install in bootloader, appear: Error flashing zip. I download again the zip, but appear the errror again, What i can doing bad? tks
acultr said:
properly installed the driver?
Click to expand...
Click to collapse
FInally got it to work . Had issues with drivers i guess , so i connected my nexus 4 to a macbookpro(hate apple though ) and it was done in less than a minute

[Q] CMW success, SU fail :(

Hello, first time poster. I recently tried rooting my phone using CWM method. I'm running sph-l720 with software version vpaumf9 and android version 4.2.2. I installed CWM (this version SPH-L720 OUDHS Recovery) with odin with success. Then flashed SuperUser v.099. Everything went smooth until I opened up super user and tried to install binaries and it says "Install failed". I'm wondering if I didnt have the wrong beginning firmware and i needed to (but didnt) install that pre-kernel. I'm also wondering if I have to download the original firmware and have to flash to stock in order to "unroot" even though I didnt finish the SuperUser process, or is their a way to delete the super user app and try to install it again using the same CWM i have already on the phone. I hope this isn't confusing. I'm not a complete novice to rooting, but no expert. I rooted my galaxy s2 but went to Iphone for a while, but now I'm back and a little dissapointed with myself at this fail. Any suggestions? Do i have to go to stock first? Was I using the wrong files for my initial firm ware and need the pre kernel? Am I blabbering on? (yes) Thanks in advance.
jonraymond21 said:
Hello, first time poster. I recently tried rooting my phone using CWM method. I'm running sph-l720 with software version vpaumf9 and android version 4.2.2. I installed CWM (this version SPH-L720 OUDHS Recovery) with odin with success. Then flashed SuperUser v.099. Everything went smooth until I opened up super user and tried to install binaries and it says "Install failed". I'm wondering if I didnt have the wrong beginning firmware and i needed to (but didnt) install that pre-kernel. I'm also wondering if I have to download the original firmware and have to flash to stock in order to "unroot" even though I didnt finish the SuperUser process, or is their a way to delete the super user app and try to install it again using the same CWM i have already on the phone. I hope this isn't confusing. I'm not a complete novice to rooting, but no expert. I rooted my galaxy s2 but went to Iphone for a while, but now I'm back and a little dissapointed with myself at this fail. Any suggestions? Do i have to go to stock first? Was I using the wrong files for my initial firm ware and need the pre kernel? Am I blabbering on? (yes) Thanks in advance.
Click to expand...
Click to collapse
Grap CF-Autoroot from here
Follow the instructions here:
Boot back to phone. Open up SU and update binaries.
Then
Go to Playstore and download/install GooManager
Open GooManager and then press the 'menu' button (capicitive button next to Home Button) and choose to install recovery (I like TWRP).
Then let it do it's thing.
If you'd like a real easy way to get 'into recovery mode' from the phone I use the Quickboot app
Also make sure that if you are going to flash ANY ROMs you follow the instructions the developer suggests - many suggest specific recoveries be used
leaderbuilder said:
Grap CF-Autoroot from here
Follow the instructions here:
Boot back to phone. Open up SU and update binaries.
Then
Go to Playstore and download/install GooManager
Open GooManager and then press the 'menu' button (capicitive button next to Home Button) and choose to install recovery (I like TWRP).
Then let it do it's thing.
If you'd like a real easy way to get 'into recovery mode' from the phone I use the Quickboot app
Also make sure that if you are going to flash ANY ROMs you follow the instructions the developer suggests - many suggest specific recoveries be used
Click to expand...
Click to collapse
thank you! do i need to do anything before i do this? (Like using odin to revert back to stock?)
i ask because i already have CWM installed
I did the auto root, and open SuperSU and it doesnt ask to update binaries...does that mean it is already done. I didnt find the option in the settings.
jonraymond21 said:
thank you! do i need to do anything before i do this? (Like using odin to revert back to stock?)
i ask because i already have CWM installed
I did the auto root, and open SuperSU and it doesnt ask to update binaries...does that mean it is already done. I didnt find the option in the settings.
Click to expand...
Click to collapse
As long as your on some kind of TW/Stock based ROM you should be Okay.
However if you want to go back to straight (AND ROOTED) stock you can use one of rwhilco12's 'one-click' restores.
The one click downloads as a zip. decompress and then run the one -click. If you've never run a oneclick read here
It will give you a stock ROM, rooted, MF9 Modem, Stock recovedry, and Stock kernel. You'll then have to use GooManger method to get custom recovery.
leaderbuilder said:
As long as your on some kind of TW/Stock based ROM you should be Okay.
However if you want to go back to straight (AND ROOTED) stock you can use one of rwhilco12's 'one-click' restores.
The one click downloads as a zip. decompress and then run the one -click. If you've never run a oneclick read here
It will give you a stock ROM, rooted, MF9 Modem, Stock recovedry, and Stock kernel. You'll then have to use GooManger method to get custom recovery.
Click to expand...
Click to collapse
man thanks so much. so i definitly got super user access. I'm about to do the goo manager. since you suggested the twrp i think i'm going to try that. since i have CWM recovery installed, do u think that will create any issues if I go to install TWRP from goo manager
actually i googled and it seems that goo manager will seamlessly overwrite cwm. sorry for the questions before searching. appreciate the help. i almost didn't come on here, which would of lead me to reverting to stock, doing cwm again, then being upset that i needed twrm for most roms lmao. I owe u one. If u ever need to learn how to make bad decisions, just shoot me a pm. I got u covered.
No it will just replace it.
I actually (and many around here too) prefer TWRP 2.5.0.2.
You can download the zip for that here, boot to recovery you have now (CWM) and then install that. Or use Goo to install lates TWRP and boot to recovery and then install zip and choose the 2.5.02 you downloaded and then save to your sd card
scratch what i posted here. I ended up having to download ROMmanager and update CWM, then used CWM to install the zip you provided me. thanks so much man. Do you have a favorite stable ROM you recommend using TWRP. I value your advice
jonraymond21 said:
scratch what i posted here. I ended up having to download ROMmanager and update CWM, then used CWM to install the zip you provided me. thanks so much man. Do you have a favorite stable ROM you recommend using TWRP. I value your advice
Click to expand...
Click to collapse
Glad you got it.
As for ROMs you really have to try them out for yourself. There are some really great TW ROMs ; Sacs, negalite, triforce and others. For CM/AOSP there are a whole bunch to choose from. I mess with just about all of them. But my daily driver has to be one hundred percent working and reliable so for that I'm usually on a stock debloated and modified TW ROM. Take some time to read through the OPs of the devs and just as importantly through the follow up posts to see what works what doesn't ahs how to fix or get what you need.
Good luck
Sent from my SPH-L720 using XDA Premium 4 mobile app
leaderbuilder said:
Glad you got it.
As for ROMs you really have to try them out for yourself. There are some really great TW ROMs ; Sacs, negalite, triforce and others. For CM/AOSP there are a whole bunch to choose from. I mess with just about all of them. But my daily driver has to be one hundred percent working and reliable so for that I'm usually on a stock debloated and modified TW ROM. Take some time to read through the OPs of the devs and just as importantly through the follow up posts to see what works what doesn't ahs how to fix or get what you need.
Good luck
Sent from my SPH-L720 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Try this Rom!
http://forum.xda-developers.com/showthread.php?t=2327692&page=43
works great!

been flashing roms for over 5 years... Nexus 6p bricked....

So tried to dirty flash one rom over the another, both 7.1.1 never been a problem before.
No my phone boots up but everythigns is just black( never happened before) Also i cant reach twrp since the phone is just saysing no command and there is a red triangle.
Well just boot into recovery use a toolkit and wipe the phone and install the rom again.... Well, my mac cant find the phone.
Basically i dont know what to do now...
mosd said:
So tried to dirty flash one rom over the another, both 7.1.1 never been a problem before.
No my phone boots up but everythigns is just black( never happened before) Also i cant reach twrp since the phone is just saysing no command and there is a red triangle.
Well just boot into recovery use a toolkit and wipe the phone and install the rom again.... Well, my mac cant find the phone.
Basically i dont know what to do now...
Click to expand...
Click to collapse
You should read the sticky thread in general. Beginners guide.
Red triangle with no command. That's stock recovery which is why you can't access TWRP, you don't have it anymore.
Also, not for nothing, don't dirty flash between different ROMs. I honestly find it extremely hard to believe (borderline of not at all) that you've been doing it 5 years and never had a single problem.
Here you go: http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928/page519
Edit: Stop using toolkits for this exact reason. Follow the guide I posted above and do everything manually and you'll be fine.
ive had problems before but always solved them. I got the phone up and running now. Problem is that i need to flash gapps and i have no google apps on my phone. I think i will solve it. Thanks.
mosd said:
ive had problems before but always solved them. I got the phone up and running now. Problem is that i need to flash gapps and i have no google apps on my phone. I think i will solve it. Thanks.
Click to expand...
Click to collapse
You shouldn't ever switch ROMs without clean flashing. I hope you're not reporting bugs in threads while dirty flashing between different ROMs.
Anyways, ROMs can generally boot without Gapps. Any source built ROM, per Google's rules, cannot include Gapps. You can flash a source built ROM without Gapps and boot without Play Store, etc.
You don't even have a custom recovery to flash a Gapps package.
You really need to take the time to read the thread I posted so you can learn how to do things correctly so you don't need to post a thread every time something goes wrong, which likely will the way you're flashing now.
No offense intended.
I thank you for your advice. Here what i did. Since i didint had any google services i had to download google play apk from the internet. DIdnt work without google services...so installed google services but everything crashed.
1. Download flashfire but didnt work...why? Because my rom came with superuser.
2. Install flashify and then install twrp.
3. Install gapps via twrp
4. Wipe, install rom+gapps via twrp.
5. Sucess.
Thanks
Seems like fastboot would have been an easier method....
Also not bricked, simply user error.
mosd said:
I thank you for your advice. Here what i did. Since i didint had any google services i had to download google play apk from the internet. DIdnt work without google services...so installed google services but everything crashed.
1. Download flashfire but didnt work...why? Because my rom came with superuser.
2. Install flashify and then install twrp.
3. Install gapps via twrp
4. Wipe, install rom+gapps via twrp.
5. Sucess.
Thanks
Click to expand...
Click to collapse
I don't understand step 3 given what you did in step 4 but at least you got your phone back.

My ZE551KL only boots to TWRP (and various other fun)

Hi. I was enjoying Lineage OS's latest ROM (14.1) and wasn't able to enjoy the "nightly" updates because when I went to do the update, I found out I needed a compatible recovery to do so. I had TWRP sitting on my computer and would FASTBOOT Boot twrp.img to flash roms. When I saw you needed to install twrp to make the Nightly update feature work, I flashed it with fastboot. I also went ahead and decided to start from scratch with a fresh install and used the latest Nightly LIneage OS file . After it installed, it booted up great. But when I went to add many apps back to my phone, so many of them were not showing up in the play store. And when some did, it would say "Incompatible Device" So I went to my settings and decided to try out the Nightly update hoping maybe that was the problem. When it booted to TWRP, nothing happened. So I hit REBOOT. and no matter what I choose, it just boots back into TWRP. Even when I hold the power button down and let it boot back up. Without touching any volume buttons, it just boots into TWRP. I can't get back to my OS. I'm going to try to install Lineage OS again and just hope I can get to my phone to make sure I'm getting messages from friends, doctors, etc...
Any help on how to fix this would be appreciated. I used this site " http://www.androidinfotech.com/2016...2-laser-ze551kl-marshmallow-install-twrp.html "
to root my phone so I could use Titanium Backup. I'm hoping something in there didn't mess me up.
Thank you in advance.
-Fuzzy
Well dang. I tried installing LINEAGE OS rom again and hoped for some strange reason it would boot into it. TWRP just keeps loading. I try the Reboot command in TWRP then choose SYSTEM and it still just goes to TWRP.
Well sometimes it just helps to air your frustration. As is true with many things in life. Say it out loud. Etc...
I was sure I had THE latest version of TWRP installed when this was happening. I rechecked to make sure. I didn't. I was 1 version away. Fastboot flashed that and it's booting normally . For now. Now, to see if I can get those apps to show up in the play store.
Things like Snapchat, Facebook messenger, etc... would just not show up.
Nope. That's still a problem . I wonder why this is happening?
Try clearing dalvik cache and sync you data for your mail account. I think those app wil show up. As for snapchat, you can't install it via playstore you can't pass safetynet.
FuzzyFone said:
Hi. I was enjoying Lineage OS's latest ROM (14.1) and wasn't able to enjoy the "nightly" updates because when I went to do the update, I found out I needed a compatible recovery to do so. I had TWRP sitting on my computer and would FASTBOOT Boot twrp.img to flash roms. When I saw you needed to install twrp to make the Nightly update feature work, I flashed it with fastboot. I also went ahead and decided to start from scratch with a fresh install and used the latest Nightly LIneage OS file . After it installed, it booted up great. But when I went to add many apps back to my phone, so many of them were not showing up in the play store. And when some did, it would say "Incompatible Device" So I went to my settings and decided to try out the Nightly update hoping maybe that was the problem. When it booted to TWRP, nothing happened. So I hit REBOOT. and no matter what I choose, it just boots back into TWRP. Even when I hold the power button down and let it boot back up. Without touching any volume buttons, it just boots into TWRP. I can't get back to my OS. I'm going to try to install Lineage OS again and just hope I can get to my phone to make sure I'm getting messages from friends, doctors, etc...
Any help on how to fix this would be appreciated. I used this site " http://www.androidinfotech.com/2016...2-laser-ze551kl-marshmallow-install-twrp.html "
to root my phone so I could use Titanium Backup. I'm hoping something in there didn't mess me up.
Thank you in advance.
-Fuzzy
Click to expand...
Click to collapse
What version of TWRP have you used? If it's 3.0.2.4 and below, update it.
darkeyes22 said:
What version of TWRP have you used? If it's 3.0.2.4 and below, update it.
Click to expand...
Click to collapse
(As shown in Post #3)
Already updated it. I got that part of the problem fixed. Thanks tho! :good:
FuzzyFone said:
(As shown in Post #3)
Already updated it. I got that part of the problem fixed. Thanks tho! :good:
Click to expand...
Click to collapse
What do you mean by saying "part of the problem"? Maybe I can help you with the rest of it.
darkeyes22 said:
What do you mean by saying "part of the problem"? Maybe I can help you with the rest of it.
Click to expand...
Click to collapse
Hello. I'm running the latest version of LineageOS 14.1 (just installed the nightly update) and several of the apps close the second I launch them. Clock was the first one I noticed . Loading pictures to share in other apps from Quckpic. and other apps I can't remember right now.
So I wanted to backup everything and try a different Rom thinking I might not have those problems. I installed SU and TWRP and then Titanium Backup Pro. After installing SU I had root. This morning I went to run a current backup and it said I no longer had root.
Dang. I have to go to the Pain Clinic. Time always catches up with me so fast when trying to problem solve.
Thank yo for reaching out! I really appreciate it. Especially with a phone that's not so popular out there in the wild that it's limited on folks available for help. it's 9:16am where I'm at. I'll probably be back in a few hours from now.
Thanks again, DarkEyes.
-Fuzzy
FuzzyFone said:
Hello. I'm running the latest version of LineageOS 14.1 (just installed the nightly update) and several of the apps close the second I launch them. Clock was the first one I noticed . Loading pictures to share in other apps from Quckpic. and other apps I can't remember right now.
So I wanted to backup everything and try a different Rom thinking I might not have those problems. I installed SU and TWRP and then Titanium Backup Pro. After installing SU I had root. This morning I went to run a current backup and it said I no longer had root.
Dang. I have to go to the Pain Clinic. Time always catches up with me so fast when trying to problem solve.
Thank yo for reaching out! I really appreciate it. Especially with a phone that's not so popular out there in the wild that it's limited on folks available for help. it's 9:16am where I'm at. I'll probably be back in a few hours from now.
Thanks again, DarkEyes.
-Fuzzy
Click to expand...
Click to collapse
Re-check your root with Root Checker. If you still have it, flash su removal through TWRP and flash systemless SuperSU. If you don't have it, just install systemless SuperSU. After you do that, boot back to the system (your boot might loop once - it's normal, do not interrupt boot), give TB pro root access, and see if it helped.
darkeyes22 said:
Re-check your root with Root Checker. If you still have it, flash su removal through TWRP and flash systemless SuperSU. If you don't have it, just install systemless SuperSU. After you do that, boot back to the system (your boot might loop once - it's normal, do not interrupt boot), give TB pro root access, and see if it helped.
Click to expand...
Click to collapse
Hello. Sorry it took me long to reply. After appointment, I was in too much pain to get online.
I installed thru Fastboot "addonsu-remove-14.1-arm64-signed.zip" rebooted, then installed addonsu-14.1-arm64-signed.zip thru Fastboot too and rebooted. Still no root. I checked it with RootChecker and there was no root.
Running latest nightly of LineageOS.
FuzzyFone said:
Hello. Sorry it took me long to reply. After appointment, I was in too much pain to get online.
I installed thru Fastboot "addonsu-remove-14.1-arm64-signed.zip" rebooted, then installed addonsu-14.1-arm64-signed.zip thru Fastboot too and rebooted. Still no root. I checked it with RootChecker and there was no root.
Running latest nightly of LineageOS.
Click to expand...
Click to collapse
Through Fastboot? Try through TWRP, flash removal, then flash Systemless SuperSU (not the one you have now).
Here is the link to systemless SuperSU: https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Hi
1st Step is Install official TWRP 3.1.1 which is availble for our device ze551kl aka Zool or ZooLD.
Boot in to TWRP
wipe cache+Dalvik cache+system+ASDF+internal storage.
now install Lineage rom latest version.
then gapps.
wipe dalvik cache.
hit Reboot system option
.it wlll not go in bootloop if u followed these steps which are guided by Devs here.
if u still facing bootloops u must have done extra ordinary thing with ur Device.
RonakRonak said:
Hi
1st Step is Install official TWRP 3.1.1 which is availble for our device ze551kl aka Zool or ZooLD.
Boot in to TWRP
wipe cache+Dalvik cache+system+ASDF+internal storage.
now install Lineage rom latest version.
then gapps.
wipe dalvik cache.
hit Reboot system option
.it wlll not go in bootloop if u followed these steps which are guided by Devs here.
if u still facing bootloops u must have done extra ordinary thing with ur Device.
Click to expand...
Click to collapse
It is Z00T that is ZE551KL, not Z00L. Do not even think about flashing something that was developed for Z00L on Z00T. It will not work.
Sent from my ASUS_Z00UD using XDA Labs
darkeyes22 said:
It is Z00T that is ZE551KL, not Z00L. Do not even think about flashing something that was developed for Z00L on Z00T. It will not work.
Sent from my ASUS_Z00UD using XDA Labs
Click to expand...
Click to collapse
Yes.i already mentioned model name.

Struggling with J500FN

Hey all.
I'm in need of a bit of help. I have a J5 and was getting sick of being told theres never any space to install apps, so I rooted it hoping to be able to remove the stock apps that come inbuilt like word, excel etc.... Anyway, I then decided to take it a step further and try and install a custom rom, long story short, im stuck with a green screen
I've been googling and following tutorials for hours now and I'm really at the point of giving up, so thought I would reach out incase i'm just over tired from it all and making silly mistakes.
I have TWRP 3.1.1-0 on my phone, I installed Lineage 14.1 figured out how to change the updater-script, green screen. I then installed a stock rom advanced I found here, green screen. I tried Aokp nightly nougat, green screen. After googling green screen I found a post saying its something to do with incompatibility from TWRP and that I need to install lollipop 5.1.1 firmware first before I can change to lilneage 14.1... Ive been googling for ages and I'm either coming to sites that want me to pay to download it at a reasonable speed or wait for hours. I'm a bit dubious as no other rom seems to have worked and I'm not sitting here with an empty phone.
Thanks.
LowKee84 said:
Hey all.
I'm in need of a bit of help. I have a J5 and was getting sick of being told theres never any space to install apps, so I rooted it hoping to be able to remove the stock apps that come inbuilt like word, excel etc.... Anyway, I then decided to take it a step further and try and install a custom rom, long story short, im stuck with a green screen
I've been googling and following tutorials for hours now and I'm really at the point of giving up, so thought I would reach out incase i'm just over tired from it all and making silly mistakes.
I have TWRP 3.1.1-0 on my phone, I installed Lineage 14.1 figured out how to change the updater-script, green screen. I then installed a stock rom advanced I found here, green screen. I tried Aokp nightly nougat, green screen. After googling green screen I found a post saying its something to do with incompatibility from TWRP and that I need to install lollipop 5.1.1 firmware first before I can change to lilneage 14.1... Ive been googling for ages and I'm either coming to sites that want me to pay to download it at a reasonable speed or wait for hours. I'm a bit dubious as no other rom seems to have worked and I'm not sitting here with an empty phone.
Thanks.
Click to expand...
Click to collapse
Flashing LP / MM / N ROMs based on AOSP/LOS over stock MM/ROMs based on stock MM --> green screen.
How to flash MM/N ROMs based on AOSP/LOS:
1) Install 5.1.1 stock firmware.
2) Install TWRP 5.1.1 (Nick's or Vince's).
3) Flash the MM/N ROM you want.
#Henkate said:
Flashing LP / MM / N ROMs based on AOSP/LOS over stock MM/ROMs based on stock MM --> green screen.
How to flash MM/N ROMs based on AOSP/LOS:
1) Install 5.1.1 stock firmware.
2) Install TWRP 5.1.1 (Nick's or Vince's).
3) Flash the MM/N ROM you want.
Click to expand...
Click to collapse
Don't suppose you know where I can find a copy, as I said in earlier post all the sites I find either take ages or want paying to upgrade to premium.
LowKee84 said:
Don't suppose you know where I can find a copy, as I said in earlier post all the sites I find either take ages or want paying to upgrade to premium.
Click to expand...
Click to collapse
Updato.
Awesome, went from 3 hour download to 15 minute download, finally some progress, thank you
LowKee84 said:
Awesome, went from 3 hour download to 15 minute download, finally some progress, thank you
Click to expand...
Click to collapse
Meh, tried to install but saying invalid zip file format.
LowKee84 said:
Meh, tried to install but saying invalid zip file format.
Click to expand...
Click to collapse
You extract the .zip and install it with Odin...
#Henkate said:
You extract the .zip and install it with Odin...
Click to expand...
Click to collapse
Okay, done that. So now I can install another rom from twrp or do I do it via odin?
LowKee84 said:
Okay, done that. So now I can install another rom from twrp or do I do it via odin?
Click to expand...
Click to collapse
TWRP.
You install only stock ROM with Odin (.tar format).
#Henkate said:
TWRP.
You install only stock ROM with Odin (.tar format).
Click to expand...
Click to collapse
Okay.
Anything else I need to do first? Do I need to root it again?
LowKee84 said:
Okay.
Anything else I need to do first? Do I need to root it again?
Click to expand...
Click to collapse
Most of the roms comes with root. In case it doesnt have root, you flash it after flashing the ROM.
#Henkate said:
Most of the roms comes with root. In case it doesnt have root, you flash it after flashing the ROM.
Click to expand...
Click to collapse
When I installed 5.1.1 it changed back to android recovery so I had to reinstall twrs recovery, then root again to be able to flash, but this time Lineage 14.1 finally installed
Thank you for your help.
LowKee84 said:
When I installed 5.1.1 it changed back to android recovery so I had to reinstall twrs recovery, then root again to be able to flash, but this time Lineage 14.1 finally installed
Thank you for your help.
Click to expand...
Click to collapse
So... I wanted to remove audioFx as I have no need for it, I had to root again... I tried the same root that I used originally but made it so it kept getting stuck on lineage boot screen and gave me no response on trying to boot to recovery. Any idea what went wrong?
Back to lineage again without root.
LowKee84 said:
So... I wanted to remove audioFx as I have no need for it, I had to root again... I tried the same root that I used originally but made it so it kept getting stuck on lineage boot screen and gave me no response on trying to boot to recovery. Any idea what went wrong?
Back to lineage again without root.
Click to expand...
Click to collapse
Did you flash the official SuperSU module from the lineage site?
No, I used Odin with the cf autoroot for my device.
I had problems with cf auto root, particularly the green screen on boot,try flashing the supersu from their site.
Tried it, used first one on the site, installed okay but can't see the su app anywhere, then tried the x86 version in case but wouldn't install.
Oh never mind, had to enable dev mode and enable root for apps and adb first, there is no actual app. I ran another app and it asked for root permission.
LowKee84 said:
Oh never mind, had to enable dev mode and enable root for apps and adb first, there is no actual app. I ran another app and it asked for root permission.
Click to expand...
Click to collapse
So it works?
It work

Categories

Resources