Hi everyone
Please I need a real help
My Huawei E392 usb dongle stuck in download mode after a fault firmware upgrade
I was trying to flash my usb dongle and by mistake i choose the wrong firmware update and now the dongle is not recognized and can't restore the original firmware
and now application interface & diag interface are changed
Before firmware update in device manager :
Code:
3G Application Interface
3G PC UI Interface
And now I get :crying: :
Code:
FC Application Interface
FC UI Interface
Error when try to pass the correct firmware :
Code:
Error code:10, Find port failed.
Another important remark : The LED of dongle loop between blue and green color , 2seconds 2seconds signal
Can anyone help me :highfive:
Problem solved :
Finally my problem is solved
I forced the installation of the driver of Huawei 3G Application Interface and then Huawei Flasher tool recognized my modem and I used Resurrect Mode , Proccess finish successfully
Sorry for my English.
Related
Hello
i need help to back my E5372s-32 which stuck on boot and give me logo of Huawei
after connect it to my PC cannot feel with modem
i tried to enter ' Force download " mode to firmware it using (power+Menu) buttons during turn on but i could see it for less 1 second
i could get manual for the device may help
http://www.mediafire.com/download/f...aintenance+Manual+Basic+Version+V1.2.rar.html
thanks
That Simply means there is an error on the phone software, Update it and it'l be 5n
Unfortunately XDA is not the right place to talk about MiFi Routers. So although there are millions of members here, very few will find your post, and very few of those who do will be able to help you. So you will probably have much better success in places like the GSM-Forums website.
thanks for advice , I will post it here too , you mean gsmhosting?
I get some update after many trying
I press power+Menu , as soon as (Force download) appear I quickly plugin the USB cable which connected to PC
suddenly I got screen of mifi ( DONOT POWER OFF) its force update screen, then my pc starts to feel with the modem and starts to installing driver
the problem that this PC have new windows so it does not recognize of all drivers,
after some time I installed the driver from
https://docs.google.com/file/d/0B9zJjgJXRt_eTlU2N2pJSVlRMWs/edit?pli=1
then I tried to Enter Force download again I could not
I tried more but as soon as I enter it , the mifi go out again to Huwaie logo
I do not know how I enter fore download mode easy and make PC feel again with Mifi
Please alaa i have same a problem with huawei E5372 , but when i update nothing comining only huawei logo freeze
الله يا خليك يا عم علاء عندي نفس المكلة و كل لما اعملها مش بترضى و الججهاز بيعلق ممكن حل
alaa2003 said:
Hello
i need help to back my E5372s-32 which stuck on boot and give me logo of Huawei
after connect it to my PC cannot feel with modem
i tried to enter ' Force download " mode to firmware it using (power+Menu) buttons during turn on but i could see it for less 1 second
i could get manual for the device may help
http://www.mediafire.com/download/f...aintenance+Manual+Basic+Version+V1.2.rar.html
thanks
Click to expand...
Click to collapse
I know I may be a little too late but I found the solution to this. I was stuck on the FTM screen but THIS firmware solved it. It is really easy. Try it out and tell me how it goes. All the best.
Dear i have the same problem. with my sts huawei router. Could you please tell us the whole procedure how you did it? like from the start how to install driver how to flash with full links how to move my device into download mode to detect it with computer and make installation which tools needed. Thnx in Advance.
have you solved the problem ??
Ok, so I'll try to make this short, this is how I fixed the logo bootloop.
I basically flashed a wrong firmware and the device was rendered unusable(stuck at logo).
First of all u need to use "Huawei Vodafone R215 – E5372 Flasher by fr3nsis" u can google it.
U need to find the right .hmf firmware to flash with fr3nsis.
The only one that I found and worked was "R215MobileWifiFirmware_v3.1"
it contains 13 files .bin and the flashable R215MobileWifiFirmware_v3.1.hmf.
You also need R215MobileWifiFirmware_v3.1.exe
After getting the files u need to put the device in download mode,
take the battery out and put it back, press and hold menu and power until some text appears(1 second),
right when the text appears press menu and it should get you into download mode.
Now u can use the the flasher tool to flash the firmware. after a few seconds, it should say "fail"
restart device and flash with R215MobileWifiFirmware_v3.1.exe. it should now work
searching R215MobileWifiFirmware_v3.1.hmf
Hgall8 said:
Ok, so I'll try to make this short, this is how I fixed the logo bootloop.
I basically flashed a wrong firmware and the device was rendered unusable(stuck at logo).
First of all u need to use "Huawei Vodafone R215 – E5372 Flasher by fr3nsis" u can google it.
U need to find the right .hmf firmware to flash with fr3nsis.
The only one that I found and worked was "R215MobileWifiFirmware_v3.1"
it contains 13 files .bin and the flashable .
You also need R215MobileWifiFirmware_v3.1.exe
After getting the files u need to put the device in download mode,
take the battery out and put it back, press and hold menu and power until some text appears(1 second),
right when the text appears press menu and it should get you into download mode.
Now u can use the the flasher tool to flash the firmware. after a few seconds, it should say "fail"
restart device and flash with R215MobileWifiFirmware_v3.1.exe. it should now work
Click to expand...
Click to collapse
*Hi, friend Hgall8, do you still have the R215MobileWifiFirmware_v3.1.hmf? I've been searching but I do not get it anywhere on the internet*
jose_amaral97 said:
*Hi, friend Hgall8, do you still have the R215MobileWifiFirmware_v3.1.hmf? I've been searching but I do not get it anywhere on the internet*
Click to expand...
Click to collapse
Not sure if I'm allowed to post links here, I'll send you the link in pm
E5372T -,Stucked on boot logo firmware version 21.290.03.00.838
Hi do you have any solution for version 21.290.03.00.838(current) ? I'M stucked on boot logo. How to downgrade to version 21.290.03.00.00? I tried using Fr3sis flasher 1.0v and it didn't work. I also tried Fr3nsis 1.6v but it didn't work bcuz it doesn't detect the com port meanwhile fr3nsis 1.0v can read the com port but different number of Com port. Let say huawei modem (com 9) but when it comes to detect the port using Fr3nsis 1.0v it show com4 instead. Desperately need help
Sir I have huawei e3272s-927 airtel modem when I upgrade software with wizard after the device not found and modem symbol is in device manager appear and disappear what the solution pls help me
dr_edmund said:
Hi do you have any solution for version 21.290.03.00.838(current) ? I'M stucked on boot logo. How to downgrade to version 21.290.03.00.00? I tried using Fr3sis flasher 1.0v and it didn't work. I also tried Fr3nsis 1.6v but it didn't work bcuz it doesn't detect the com port meanwhile fr3nsis 1.0v can read the com port but different number of Com port. Let say huawei modem (com 9) but when it comes to detect the port using Fr3nsis 1.0v it show com4 instead. Desperately need help
Click to expand...
Click to collapse
use boot short pin method its helped
---------- Post added at 06:22 PM ---------- Previous post was at 06:16 PM ----------
alaa2003 said:
thanks for advice , I will post it here too , you mean gsmhosting?
I get some update after many trying
I press power+Menu , as soon as (Force download) appear I quickly plugin the USB cable which connected to PC
suddenly I got screen of mifi ( DONOT POWER OFF) its force update screen, then my pc starts to feel with the modem and starts to installing driver
the problem that this PC have new windows so it does not recognize of all drivers,
after some time I installed the driver from
https://docs.google.com/file/d/0B9zJjgJXRt_eTlU2N2pJSVlRMWs/edit?pli=1
then I tried to Enter Force download again I could not
I tried more but as soon as I enter it , the mifi go out again to Huwaie logo
I do not know how I enter fore download mode easy and make PC feel again with Mifi
Click to expand...
Click to collapse
first press menu then power dont release until show arrow image
connect mifi to pc
install huawei driver
check your port device use huawei flasher or you can install firmware with exe extension
Hello everyone! This is my first post on this site. Im so sorry for my poorly english, but i'm enough desperate to write here. I got this phone in bad condition. I will not explain what exactly happened, but it was started from the fact, that system wasn't work good. Keyboard has been permanently removed, a lot of system applications/functions (e.g Sms or notifications bar) didn't work. Some processes e.g "com.android.whatever" had a 0,00 bytes. Immediately point out, that was a brand soft from Plus ( one of hugest operators from my country).
Factory reset didn't resolve the problem. Owner was tried to install new system by KDZ Updater and solutions like a "unbrick-guide-lg-leon-lte-metropcs-lgms345-kdz-firmware" (this is a full link but i can't add him to this post) or something like this. Just he had MetroPCS ROM. Then he wanted back to old, Brand ROM, and tried with similar guides, also by KDZ files and applications. Each attenpt was ended in the bootloop, since the Download Mode was got error like this:
[470] fastboot_init()
[480] Loading keystore failed status 5 [580] USB init ept Q 0x8f1df000
[600] udc_start()
[710] -- reset --
[720] --portchange --
[810] -- reset --
[810] -- portchange --
Now, smartphone is in my hands. The same problem was appeared when i was plug phone to my PC. Device manager showed:
Other devices - Android (yellow exclamation mark)
However, I discovered something strange. Download mode which showed this error is launches by holding Volume DOWN and plug to PC. When I press Volume UP and plug to PC appears... Update Firmware Mode. But PC still don't recognize this mode.
I was dicovered, that "USER" (in this field down in this Firmware Update mode) changing number. Sometimes it is "USER B100 or USER B96, USER B98...)
And that in Devices Manager:
Mobile Devices LGE Andoid MTP Device (yellow exclamation mark)
I tried with many variants of LG drivers, from many sites and none of them don't solve the problem
I haven't idea what I can do in current situation. I can't install KDZ ROM to the phone, because both of Download Mode can't connect with the PC. For the same reason I can't fix the "udc start" error. Phone has a bootloop. Recovery mode by LG can only performing a factory reset. Is it possible to fix this problem?
I think I was tried everything. I was used every one hint from the Internet, and I'm at a standstill. It remains only to give the phone for authorized LG service?
Hi
this problem you might experienced with, I had a problem with booting on my Galaxy s6 edge plus (custom binary blocked by frp lock), I tried to wipe from recovery failed then I decided to flash by using Odin... hidden.img FAIL! unfortunately I unplug the cable after found it failed.. there are the new problem started (an error has occurred while updating the device software. use the emergency recovery function in the smart switch pc software.
the smart switch software cant recognize my phone, i reinstall the driver but no good. now I cant go back on download mode either smart switch.. i dont know what to do..
please help..!!
I am dumb to do this.... anybody please help (also sorry my English is not good...)
Hi
I updated my phone software but happens very bad thing-in download mode I removed USB cable(this was an accident ) and now I got only blue screen and text-An error has occured while updating the device software.Use the Emergency recovery function in the Smart Switch PCsoftware.
I´m trying this software,I´m trryed Kies3,Odin.....nothing,because they cant find my phone....not vonnected,they sayd,but itś connevted with usb cable......Have I some changes more,or...?
Help to restore bootloader on Nokia 6
What happened? We are no magicians
ZeroPointMax said:
What happened? We are no magicians
Click to expand...
Click to collapse
The phone worked properly, but I wanted to install the European firmware, through the program QFIL I installed the firmware in the phone, and after that the phone does not turn on, or rather all the LEDs light up and the computer determines how Port Diagnostics 900E? I ported the drivers all without result. can not enter mode Downalds mod ...
Evgeny_14 said:
The phone worked properly, but I wanted to install the European firmware, through the program QFIL I installed the firmware in the phone, and after that the phone does not turn on, or rather all the LEDs light up and the computer determines how Port Diagnostics 900E? I ported the drivers all without result. can not enter mode Downalds mod ...
Click to expand...
Click to collapse
Oops, you bricked your device. You cannot flash another region if that was your intention... You can either go to customer support or try to make a USB flash cable to force the files onto your device (pls use original firmware for your device). I know that this was mentioned in the forum before but I cannot remember where exactly and I don't know if it is actually working. If it fails, your device is pretty much ******...
Just use the OST Tools and official firmware to root ur device.
Tutorial video:
OST Tools and firmware download: https://forum.xda-developers.com/nokia-6/development/nokia-6-official-firmware-mena-region-t3664441
Recovery download: https://forum.xda-developers.com/no...ecovery-project-nokia-6-t3650499/post73625011
Guide: https://forum.xda-developers.com/no...de-how-to-flash-custom-recovery-root-t3702354
Nokia 6 (TA-1003) bootloader restore how?
Dear,
My phone will not start up
How can i restore the bootloader an reflash the firmware?
I hope on a solution!
Greet,
Marno
desesperated
richardpimenov2001 said:
Just use the OST Tools and official firmware to root ur device.
Tutorial video:
OST Tools and firmware download: https://forum.xda-developers.com/nokia-6/development/nokia-6-official-firmware-mena-region-t3664441
Recovery download: https://forum.xda-developers.com/no...ecovery-project-nokia-6-t3650499/post73625011
Guide: https://forum.xda-developers.com/no...de-how-to-flash-custom-recovery-root-t3702354
Click to expand...
Click to collapse
Hi there. I'm a new user so i don't have enought privileges to make a tread about my issues. So i will try to be the most clear possible.
I got a Nokia 6 TA-1039 so i tryed to root it and that's why I'm here.
First of all the phone is now on Qualcomm HS-USB Qloader singed on 04/01/2013 and it's 2.1.0.5 version, by Xiaomi Technology Inc., then when i connect to the PC it recognizes it in that port. In the other hand, the device doesn't make any noise or dispolay anything on the screen, but in the pc it appears when i connect it.
I have downloaded following the treads the firmware Nokia_TA-1025_MSM8937_25082017_7.1.1.zip and extracted it. I was trying to use it with QFIL version 2.0.0.5 and using as configuration the next steps:
-Download protocol: 0-Sahara
-Device type: UFS
Validation mode: 0-No validation
[
then when i run it i found the next errors:
Error function: Sahara _rx_data: 194 unable to read packet header Only read 0 bytes
Error function: Sahara_main: 854 sahara protocol error
Error function: Sahara_main: 265 Uploading image using sahara protocol failed
Download fail: Sahara fail: QSaharaServer fail: Process fail
Then i tryed to flash it using Xiaomi MiFlash.exe and the errors are:
Cant found programmer file
Cannot recive Hello packet
cannot read hello packet
adittional to this I have a cable that i think that it's a EDL cable by GPGIndustries like this
http://shop.gpgindustries.com/produc...ml?pb=108&pc=2
I'm very desesperated about this. If someone can call me or help me in any way i really appreciate it.
grandroid7 said:
Dear,
My phone will not start up
How can i restore the bootloader an reflash the firmware?
I hope on a solution!
Greet,
Marno
Click to expand...
Click to collapse
I had exactly the same thing. . You must send the phone to the service.
Maxpowers88 said:
Hi there. I'm a new user so i don't have enought privileges to make a tread about my issues. So i will try to be the most clear possible.
I got a Nokia 6 TA-1039 so i tryed to root it and that's why I'm here.
First of all the phone is now on Qualcomm HS-USB Qloader singed on 04/01/2013 and it's 2.1.0.5 version, by Xiaomi Technology Inc., then when i connect to the PC it recognizes it in that port. In the other hand, the device doesn't make any noise or dispolay anything on the screen, but in the pc it appears when i connect it.
I have downloaded following the treads the firmware Nokia_TA-1025_MSM8937_25082017_7.1.1.zip and extracted it. I was trying to use it with QFIL version 2.0.0.5 and using as configuration the next steps:
-Download protocol: 0-Sahara
-Device type: UFS
Validation mode: 0-No validation
[
then when i run it i found the next errors:
Error function: Sahara _rx_data: 194 unable to read packet header Only read 0 bytes
Error function: Sahara_main: 854 sahara protocol error
Error function: Sahara_main: 265 Uploading image using sahara protocol failed
Download fail: Sahara fail: QSaharaServer fail: Process fail
Then i tryed to flash it using Xiaomi MiFlash.exe and the errors are:
Cant found programmer file
Cannot recive Hello packet
cannot read hello packet
adittional to this I have a cable that i think that it's a EDL cable by GPGIndustries like this
http://shop.gpgindustries.com/produc...ml?pb=108&pc=2
I'm very desesperated about this. If someone can call me or help me in any way i really appreciate it.
Click to expand...
Click to collapse
I dont know if this would help you guys or not but this is portable one,
You dont need to configure any sahara file or anything, just select mbn file then xml and hit download
This tool helped me alot for so many other phone which gave me sahara error
Find the tool in the attachment
Hope this will help you
Hit thanks button if you find this helpful
Happy flashing
jurek09 said:
I had exactly the same thing. . You must send the phone to the service.
Click to expand...
Click to collapse