Hi
I updated my phone software but happens very bad thing-in download mode I removed USB cable(this was an accident ) and now I got only blue screen and text-An error has occured while updating the device software.Use the Emergency recovery function in the Smart Switch PCsoftware.
I´m trying this software,I´m trryed Kies3,Odin.....nothing,because they cant find my phone....not vonnected,they sayd,but itś connevted with usb cable......Have I some changes more,or...?
Related
Hello guys...
My friend had a samsung i8910 hd with old firmware but when i told him about new roms , he asked me to install one in his phone....so he gave it to me...
Error started as follows::::
1. First symbian rom flashing tool started showing error after downloading was started in download status area that it is unable to write data via usb..
2. After sometime in connection and progress area, i see fail after downloading to modem was finished..
3. For several hours phone got connected but nothing happened..
So i removed the phone and restart the phone but it wont start and i just see the light on the screen....
Help me guys...plz..... I m very poor...i cannot buy him a new one ...
So plz... Help..........
Samsung i8910 HD
I think you should try Emergency Recovery or Emergency Re install Firmware using Kies i hope it will solve your problem
Hi
this problem you might experienced with, I had a problem with booting on my Galaxy s6 edge plus (custom binary blocked by frp lock), I tried to wipe from recovery failed then I decided to flash by using Odin... hidden.img FAIL! unfortunately I unplug the cable after found it failed.. there are the new problem started (an error has occurred while updating the device software. use the emergency recovery function in the smart switch pc software.
the smart switch software cant recognize my phone, i reinstall the driver but no good. now I cant go back on download mode either smart switch.. i dont know what to do..
please help..!!
I am dumb to do this.... anybody please help (also sorry my English is not good...)
hello ,
i rooted my Phone and did a very stupid thing and in settings i turned of oem unlock and usb debugging off again. so now my Phone wont start cause of the message "custom binary(recovery) blocked by frp lock.
i tried something trough odin for the recovery but it failed so now the Phone wont turn off and when i try to go to recovery mode it says "an error has occurred while updating the device software .use the emergency recovery function in the smart switch pc software"
i tried that but the Phone is not compatible with smart switch and with samsung kies 3.
what can i do to unbrick my Phone , is it possible to fix my Phone after this?
regards, marco
been there
use samsung kies the normal edition ...not 3...that is compatible with our phone...emergency recovery and will work...sry 4 my english
streetfighter74 said:
hello ,
i rooted my Phone and did a very stupid thing and in settings i turned of oem unlock and usb debugging off again. so now my Phone wont start cause of the message "custom binary(recovery) blocked by frp lock.
i tried something trough odin for the recovery but it failed so now the Phone wont turn off and when i try to go to recovery mode it says "an error has occurred while updating the device software .use the emergency recovery function in the smart switch pc software"
i tried that but the Phone is not compatible with smart switch and with samsung kies 3.
what can i do to unbrick my Phone , is it possible to fix my Phone after this?
regards, marco
Click to expand...
Click to collapse
Its because you didnt explored smart switch properly ..
I have been there with my phone samsung galaxy j5 ... it happened just like yours ... i rooted my phone, forgot to check oem unlock and got the "custom binary blocked by frp lock" .. then i went to odin and flashed my firmware .. and it turns out .. the firmware i flashed is not the firmware of my phone .. so i got the message "an error occured while updating blah blah please go to smart switch blah blah blah " but i fixed it so theres solution for that ... smart switch
You said smart switch cant read your device?? Its because its bricked theres no way it can be read ..
So all you have to do:
1. Open smart switch
2. Go to "more"
3. Then go to "emergency software recovery and initialization"
5. Then go to "device initialization"
6.Put your model number and then your S/N or serial number .. it is found in the back of your edge plus.. it starts with letter R..
7.. after that .. you wait .. it will download the files for your phone...
That way you wont be flashing ramdom firmwares .. your phones firmware will be flashed since smart switch used the serial number.. i hope this helps..
I WAS proud owner of Samsung Galaxy S3 Neo - GT I9301. Before 2 days i accidentaly dropped it and broken its display (black screen). Because of that fact i bought another Samsung gAlaxy s3 neo, but there was problem - all of my information was in the old s3 neo which as i said was with broken screen. I've done my best to recover the info (my phone was bootlooping but after some times it started and even my laptop detected it as a flash drive) with program named "Wondershare Dr.Fone for Android".... My attempts were in vain because nothing happened and was very dissapointed. I've downloaded program named "Samsung Data Recovery" but it said that the phoned must be turned on. I've tried to do that but nothing happened. This time the phoned doesnt want to call the starting "signal.... I've opened again the Wondershare Dr.Fone for Android and realised that the s3 neo was stuck into download mode. How i can get my information when my phone is stucked into download mode and it is with dead display?
Hello Android specialists,
my Galaxy Tab A stuck in bootloop with an flashing and pulsating screen showing "an error has occurred while updating the device software".
I already tried to fix the problem via odin an Firmware file from sammobile, without success.
It seems the Tablet is not really recognized by the Computer.
Are there any possibilities for an factory reset to get the Device to work without odin ?
Also the batterie is not working, it only powers on while connected on PC.
In device manager its only shown unter USB Controller. No more entries.
I guess ist software bricked... because i also cant get to bootloader
Sorry for my bad English and thank your for solutions.
floelb said:
Hello Android specialists,
my Galaxy Tab A stuck in bootloop with an flashing and pulsating screen showing "an error has occurred while updating the device software".
I already tried to fix the problem via odin an Firmware file from sammobile, without success.
It seems the Tablet is not really recognized by the Computer.
Are there any possibilities for an factory reset to get the Device to work without odin ?
Also the batterie is not working, it only powers on while connected on PC.
In device manager its only shown unter USB Controller. No more entries.
I guess ist software bricked... because i also cant get to bootloader
Sorry for my bad English and thank your for solutions.
Click to expand...
Click to collapse
You need to put it back in download mode.
Hold POWER + HOME + VOL DOWN until it reboots to download mode.