Imperium W812a ROM v1.2.0 (D5, K8 Mini, etc..) - Other SmartWatches

This project has been moved to the G+ community.

*Battery Life*
Parameters : Wake enabled, Email sync every hour, Calander sync, Weather sync
Companion Mode (BT with tethering): 3-4 days w/ 50-70 notifications a day
Standalone Mode (Cellular data): 1-2 days w/ 50-70 notifications a day

As you may have noticed. This is now a DevDB project. Across the top of the thread you will see "Downloads, Reviews, Feature Requests, Bug Reports". Please utilize these features.
Please use this template for filing bug reports on the "Bug Reports" page. This will make things go much smoother for everybody;
Release version-
Issue-
How often the issue occurs-
What you have done to try to resolve issue-
.

Thank you very much for the work you put into this. I don't have my D5 yet (should arrive before weekend if i am lucky). I'll happily flash this rom as soon as i have it and report back.

I'm so glad we have the last firmware update in the new custom rom, too. I wasn't able to use the latest watchfaces because they required the new firmware already for counter-clockwise rotation features.
I just installed the new rom over twrp like in the instruction. I wiped system, dalvic and cache only, didn't wipe 'data' though and didn't lose any apps/data. As far as I can see it works good, the watch got really warm and laggy at first but I will give the system some time to 'settle in'.
At first the recovery didn't find the 'backup' to restore. I had to put it in the directory ...\TWRP\backup\0000000000000000 . I discovered this by making a little backup from the old cache ( just a few MB) over twrp to look in which folder it will be put in. Sherlock
Thanks for the great work!!!

Thanks again mate
Out of interest - did you decide to stay with mailwise because it is a lighter client?

Thanksyou but 3G network not active. 2G mobile network ok

the steve said:
I'm so glad we have the last firmware update in the new custom rom, too. I wasn't able to use the latest watchfaces because they required the new firmware already for counter-clockwise rotation features.
I just installed the new rom over twrp like in the instruction. I wiped system, dalvic and cache only, didn't wipe 'data' though and didn't lose any apps/data. As far as I can see it works good, the watch got really warm and laggy at first but I will give the system some time to 'settle in'.
At first the recovery didn't find the 'backup' to restore. I had to put it in the directory ...\TWRP\backup\0000000000000000 . I discovered this by making a little backup from the old cache ( just a few MB) over twrp to look in which folder it will be put in. Sherlock
Thanks for the great work!!!
Click to expand...
Click to collapse
I know Loki didn't put this in his instructions so it's not absolutely necessary but:
The problem with this approach (not wiping everything) is that if you do experience issues down the track, it makes it much more difficult to pinpoint the cause.
Another serious point is that when you move to a fairly major update - which this is - a factory reset of the watch is best practice.
I would say even if you use the SP Tools version you should factory reset after the first full boot.
About recovery not seeing the data to restore - that's why Loki normally gives the whole folder structure starting with "TWRP" as top level. It also contains a small file which recovery looks for when it boots.
---------- Post added at 08:18 PM ---------- Previous post was at 08:15 PM ----------
hoaihaiduong said:
Thanksyou but 3G network not active. 2G mobile network ok
Click to expand...
Click to collapse
More information please.
Did you do a full wipe?
SP or TWRP install method?
Did you check your APN?
Have you checked that the "screen off = data off" setting is not the problem?
Which band does your sim use for 3g 850 or 2100 ?
PS in future these reports would be recorded under the "bug report" tab.
Cheers

pablo11 said:
I know Loki didn't put this in his instructions so it's not absolutely necessary but:
The problem with this approach (not wiping everything) is that if you do experience issues down the track, it makes it much more difficult to pinpoint the cause.
Another serious point is that when you move to a fairly major update - which this is - a factory reset of the watch is best practice.
I would say even if you use the SP Tools version you should factory reset after the first full boot.
About recovery not seeing the data to restore - that's why Loki normally gives the whole folder structure starting with "TWRP" as top level. It also contains a small file which recovery looks for when it boots.
---------- Post added at 08:18 PM ---------- Previous post was at 08:15 PM ----------
More information please.
Did you do a full wipe?
SP or TWRP install method?
Did you check your APN?
Have you checked that the "screen off = data off" setting is not the problem?
Which band does your sim use for 3g 850 or 2100 ?
PS in future these reports would be recorded under the "bug report" tab.
Cheers
Click to expand...
Click to collapse
Thank you for the advice! Of course you are right that a full wipe would be better but I did't want to setup everything from the beginning again. My watch actually works fine now and I don't experience any issues so far. I promise that in case of any problems with this rom I will do a full wipe and a clean flash first before bothering anyone here

It's all good. If it's working well then that's what it's all about.
I was giving general advice really

pablo11 said:
Thanks again mate
Out of interest - did you decide to stay with mailwise because it is a lighter client?
Click to expand...
Click to collapse
Yep. Even with nano gapps, I'm down to less than 200MB free space in system. So at this point, every MB is starting to count. I'm even looking at removing any launcher watchface that can be duplicated with a clockskin except for the default.

I can never get the keyboard the same as it was in your last release. That was perfect. Is there a trick to it?
I have the folder on the SD card and the keyboard is invoked correctly but the layout with mic activation on long press is what I miss.

@pablo11 I'll have to get back to you one that, I'm trying to track down a more serious issue.

pablo11 said:
More information please.
Did you do a full wipe?
SP or TWRP install method?
Did you check your APN?
Have you checked that the "screen off = data off" setting is not the problem?
Which band does your sim use for 3g 850 or 2100 ?
PS in future these reports would be recorded under the "bug report" tab.
Cheers
Click to expand...
Click to collapse
Did you do a full wipe?
SP or TWRP install method?
Did you check your APN?
Have you checked that the "screen off = data off" setting is not the problem?
Which band does your sim use for 3g 850 or 2100 ?
This call in 2G network ok no call amd data on 3G, In vietnam Vinaphone use B1 (2100) UMTS

hoaihaiduong said:
This call in 2G network ok no call amd data on 3G, In vietnam Vinaphone use B1 (2100) UMTS
Click to expand...
Click to collapse
There may be an issue with the D5 base firmware that's causing this but both of you posts provide little information than other than "It don't work". In the future your posts should look something like THIS. They should also never be posted in general discussion but in "Bug Reports"

Reverted back to v1.2.0

All future W812 development can be found HERE

Lokifish Marz said:
All future W812 development can be found HERE
Click to expand...
Click to collapse
I apologize in advance if I repeat or I repeat someones question, but why you cannot delete the system the dials are in this firmware? Some of them are so ridiculous and not relevant, for example the snowman with the snow!

Related

[ROM] The XT720 XDA Special Final RC2 "Hellmonger Edition"

Well here is RC2
OMFG Thank's to Mz, Fj, 3rd, Lm, Sh, and last but not least you reading this
See that way i thank everyone no one is missed, thank you once again
Especially thanks' to All the testers that i royally messed their phones up..
Do some of them still turn on? LOL
Ok..... So now that the pleasantries are out of the way, to the nitty gritty <
Governors are back and working!!!
So that means[EDIT] The OC should be @1000 not sure of the vsel depends what you do with it, 68 is stable all the time... due to Camera stability issues} all the time, trust me the batt will not OH and batt life will be awesome
Sqlite3 hacks
160/sms char
Fixed dialer
Fixed Libs!!!
Thank Mz for giving me the wrong utilities that sent me in to dependency hell for about 8 hours....
But it did force me to fix some crappy broken dependency i didn't even knew existed in the filesystem.
MOC working
EXT4 WORKING OMFG the speed and stability OMFG
Email fixed
MMS 3g fix here Thx MZ, Fj + JP8 and Lm
http://forum.xda-developers.com/showpost.php?p=17510536&postcount=452
A2sd Fixed,
Dalvik-cache to ext or cache FIXED yes no more stuck at M <Disable Dalvik Jit in A2sd GUI, it's broken but already enable by default in the ROM.>
Mega standby time
How to,
this one is a little more complicated than before but it due to moving to the new file system.
1. You need to have the New OR put together by Mz and Fj, just copy to root of SD card.
*****NEW*****
Mz and FJ put out a new OR, Very very very nice, and i added Supercharger V6.
+
Now listen Kids DO NOT USE BULLET PROOF!!!
It will cause an immortal loop in killing and starting processes that will kill you bat in no time.
The rest seems fine so far... I Have really tested it and SCV6 does OOM right files and seems to have stabilized a few MEM leaks actually....
Thanks zeppelinrox
http://www.mediafire.com/?ix49xm0r0h448dg
2. If you have ext2 or 3 just format to ext4 with OR SD utilities.
If you already have EXT4 made with OR you are fine, but if formatted from gparted or something else it wont work!
You need format back to ext2 with you fav util and see step 2.
3. Restore back up
http://www.mediafire.com/file/g3xz3d11wygqyly/XDASp_HmE_RC2.zip
Mirror Thanks Lm
http://www.megaupload.com/?d=2Q7S4D3W
Swap fix see attachment
run from shell after swapfix update
Code:
chmod 777 /system/etc/init.d/00_swapon
something broked when setting permissions....
Run your favorite a2sd command like
1. a2sd reinstall
2. a2sd cachesdreset
3. a2sd reswap
Profit!!!!
Use boot2 for fast boot.
None of the above parties are responsible if implementing any of the above changes causes the world to end and kittens to catch on fire or the mail being late, not even if your phone turns into a transformer and takes over the world and enslaves the human race I will not be responsible or any person mentioned above... well maybe Fj, he's Russian like who cares right???
Joking lol, Fj isn't responsible either... <3
Why WIND has issues with SMS and MMs especially if your number was originally ported from another provider or had a temporary number associated to the SIM..
Thanks R-D
http://forum.xda-developers.com/showpost.php?p=17198867&postcount=303
Work around for broken Wind SIM card.
http://forum.xda-developers.com/showpost.php?p=17274125&postcount=410
How to disable Roaming and MMS fix
http://forum.xda-developers.com/showpost.php?p=17166396&postcount=362
After all that update to XDA Special STOCK multi lang stock patch
EXPERIMENTAL NEED TO FULL WIPE AFTER!
http://forum.xda-developers.com/showpost.php?p=17459698&postcount=440
sileshn made a nice mod for us Thanx man
http://forum.xda-developers.com/showpost.php?p=17416499&postcount=1
++Screen SHOTS!!!!
Файл, который Вы пытаетесь открыть, временно недоступен. Повторите попытку позднее.
Translation:
File, that you trying to open, temporary unavailable. Try later..
fjfalcon said:
Файл, который Вы пытаетесь открыть, временно недоступен. Повторите попытку позднее.
Translation:
File, that you trying to open, temporary unavailable. Try later..
Click to expand...
Click to collapse
Im uploading to mediafire now
hellmonger said:
If you want TV out to work you need to flash from singapore SBF/
Will work from anything, but if you want to report bugs please state the following in your post.
Click to expand...
Click to collapse
Thank you for this ROM.
Have you solve problem with umount all mounts on sdcard before reboot?
fjfalcon said:
Have you solve problem with umount all mounts on sdcard before reboot?
Click to expand...
Click to collapse
Not exactly.....
RC1... EXT4 works
Left for final
1. EXT unmount on shutdown
2. make a pretty boot animation.
3. Fix color difference in icons.....
hellmonger said:
Not exactly.....
RC1... EXT4 works
Left for final
1. EXT unmount on shutdown
2. make a pretty boot animation.
3. Fix color difference in icons.....
Click to expand...
Click to collapse
Ok, downloading now..!
I'm very happy with CM6 but hey, I can't resist flashing a new ROM..
Question: So if i don't have EXT4, no issues? Will app2extr still work with my EXT3 partition? Thanks again!
Wow dude, i don't know what to say, I'm literally like a kid at christmas! LMAO! Thanks a lot Hellmonger Been eagerly waiting but know you been workin hard on this Beaut! Awesome work man and thanks for your help Mz you been performing miracles lately! Nice work on ext4 bud! and everyone else. Thanks Peshovic and fjfalcon as well. Trying now!
Know I'm a nub here and all, but I've got an rooted, SIM-Unlocked Cincy Bell XT720. I'll pitch this ROM on (tried out Dexter's 2.2 already) and let you guys know how it works on WIND Mobile (Canada). O-^
Well...I installed it. Went over smoothly, things appeared fine at a first glance. But, I'm still failing to be able to connect to Wind Home (3G - non roaming). The phone's completely SIM-unlocked, sees both WIND Away (Rogers - 2G) and WIND Home, but I'll either get a "Your SIM Card does not allow a connection to this network" problem, or the network just fails to connect outright. I think it may be a problem with the radio or some other form of configuration with this thing...something stupid I'm not finding. Can anyone help me out here? :/
RyanGDI said:
Well...I installed it. Went over smoothly, things appeared fine at a first glance. But, I'm still failing to be able to connect to Wind Home (3G - non roaming). The phone's completely SIM-unlocked, sees both WIND Away (Rogers - 2G) and WIND Home, but I'll either get a "Your SIM Card does not allow a connection to this network" problem, or the network just fails to connect outright. I think it may be a problem with the radio or some other form of configuration with this thing...something stupid I'm not finding. Can anyone help me out here? :/
Click to expand...
Click to collapse
wow, I wonder how you were able to post in development right away with your very first post? Anyway make sure you have background data turned on first then try apn manager maybe.
***Help***
Not sure how to mount ext4 it's saying this ROM may not support it?
***also-- Just seen this clock widget, haven't checked yours out just thought I'd post this fyi BobClockD3-green and here is a pic
LibertyMonger said:
wow, I wonder how you were able to post in development right away with your very first post? Anyway make sure you have background data turned on first then try apn manager maybe.
***Help***
Not sure how to mount ext4 it's saying this ROM may not support it?
Click to expand...
Click to collapse
I'm not sure about how I ended up being able to post here...probably because my account's been around since December '09, I perhaps have some "seniority" factor or something along those lines that defies the post limit. No idea...
Anyways, I can pin it down precisely to a "Your SIM does not allow a connection to this network" error. I've got my APNs configured perfectly and set up, and have all of my data settings on. When I go to manually select a network, WIND Home consistently becomes available. I'll select it though, and I get a "Selected network (WIND Home) unavailable" notification, followed by the SIM error 1-2 minutes later. I can connect to WIND Away with great signal strength, and even pull 3G roaming...I've tried everything in here (http://forum.xda-developers.com/showthread.php?t=974375) including SMSC config and locking the band to WCDMA through the hidden phone menu for detecting WIND Home only.
I hate being a noob here, tromping on this guy's latest release with this problem. I'd just make a separate thread on the matter and get help that way, but it seems a bit excessive to start two discussions on the same topic. Sorry, and thanks in advance for all the help.
RyanGDI said:
I'm not sure about how I ended up being able to post here...probably because my account's been around since December '09, I perhaps have some "seniority" factor or something along those lines that defies the post limit. No idea...
Anyways, I can pin it down precisely to a "Your SIM does not allow a connection to this network" error. I've got my APNs configured perfectly and set up, and have all of my data settings on. When I go to manually select a network, WIND Home consistently becomes available. I'll select it though, and I get a "Selected network (WIND Home) unavailable" notification, followed by the SIM error 1-2 minutes later. I can connect to WIND Away with great signal strength, and even pull 3G roaming...I've tried everything in here (http://forum.xda-developers.com/showthread.php?t=974375) including SMSC config and locking the band to WCDMA through the hidden phone menu for detecting WIND Home only.
I hate being a noob here, tromping on this guy's latest release with this problem. I'd just make a separate thread on the matter and get help that way, but it seems a bit excessive to start two discussions on the same topic. Sorry, and thanks in advance for all the help.
Click to expand...
Click to collapse
Well for starters, I am connected with 3g plus wifi so no probs there for me. Everything is freakin awesome so far! Love the Mean Green Glad to have it back! Nice pic for wallpaper! speed is perfect for me, don't need that Super crazy over the top speed lol.
(EDIT-actually after overclocking to 1000 it is super crazy fast!)
Not sure where your prob is yet first I heard of that issue. Did you start with Singapore SBF? Maybe just wait for someone else to reply since I'm not familiar with that issue bud.
***My only issue so far is can't mount my ext4. I repartitioned and flashed Singapore sbf. Restored all my apps and have about 20mb left it's saying ROM may not support ext4.
hellmonger said:
Not exactly.....
RC1... EXT4 works
Left for final
1. EXT unmount on shutdown
2. make a pretty boot animation.
3. Fix color difference in icons.....
Click to expand...
Click to collapse
If you want, I can make a boot animation.
Say me if you want I post one.
LibertyMonger said:
Well for starters, I am connected with 3g plus wifi so no probs there for me. Everything is freakin awesome so far! Love the Mean Green Glad to have it back! Nice pic for wallpaper! speed is perfect for me, don't need that Super crazy over the top speed lol.
(EDIT-actually after overclocking to 1000 it is super crazy fast!)
Not sure where your prob is yet first I heard of that issue. Did you start with Singapore SBF? Maybe just wait for someone else to reply since I'm not familiar with that issue bud.
***My only issue so far is can't mount my ext4. I repartitioned and flashed Singapore sbf. Restored all my apps and have about 20mb left it's saying ROM may not support ext4.
Click to expand...
Click to collapse
Alright, thanks...I'm dead sure this is a Cincy Bell (saw the links for Cincy Bell website sites with the Moto portal tool when I first got it), but I'll just ask in the General section and leave this thread in peace. Again though, at least I can vouch for the fact that installing this ROM and fiddling around with it didn't screw it up in any way...one more bit of peace of mind for prospective flashers.
Thanks a lot !!!!!
But does an ext3 partition will work ???? Do you have to make an ext4 part? (to make you have to follow the same order than before with the ext3???) Can you move your apps from ext3 to ext4????
Someone have the ext4 working?
B_e_n said:
Thanks a lot !!!!!
But does an ext3 partition will work ???? Do you have to make an ext4 part? (to make you have to follow the same order than before with the ext3???) Can you move your apps from ext3 to ext4????
Someone have the ext4 working?
Click to expand...
Click to collapse
Maybe I will try convert-ext4 -Converts an EXT3 partition to an EXT4 partition.
I have my old sdcard with ext3 still.
Also I tried boot.img, boot2.img and boot5.img, it appears boot.img is the one for now?...
LibertyMonger said:
Maybe I will try convert-ext4 -Converts an EXT3 partition to an EXT4 partition.
I have my old sdcard with ext3 still.
Also I tried boot.img, boot2.img and boot5.img, it appears boot.img is the one for now?...
Click to expand...
Click to collapse
So you haven t apps2ext for the moment?????
B_e_n said:
So you haven t apps2ext for the moment?????
Click to expand...
Click to collapse
No, trying! lol. I am trying ext3 now. I know it's probably something easy to fix. But I have tried all I know with ext4 and apps wouldn't move over...
I got ext3 to work, need to check my apps then try to change to ext4 i guess...
Zachary57 said:
If you want, I can make a boot animation.
Say me if you want I post one.
Click to expand...
Click to collapse
Well i would like the seconnd part of the curent boot animation to fade in and out
"XDA Special" at the top and
Hellmonger Edition" st the bottom.
EXT2 3 and 4 should work EXT4 is isainly fast nd should auto mount at start up

[ ROM Release ] [group ING ROM】 【4/6 update the] U8800pro-CM7

CM updated the Lunar amendment sonic boom amendment, music player, SD card mounted to the probability of failure
Install the ROM:
1. Brush package downloaded zip do not extract directly into the SDcard on
has been holding down volume up + power button is turned on, do not release until well into the recovery mode
. recovery, volume up and down keys / menu Home key to move up and down the power button / search button to confirm the return key to return to previous menu.
(4) Select "Clear all data" restore factory
5. select from the SD card, select the Brush package "
re-election to select the ZIP file "
7 "from the SD card to find just download the zip Brush package to confirm
8. confirmed, Brush, wait about one minute to complete.
After brushing, back to the first menu, select "reboot the system immediately and restart the phone
10. and then patiently wait for a while, for the first time you start slow. Have a problem, bug, feedback ~! Not necessarily answer ~! Join to score it ~!
1, revised the definition camera, fix the WIFI MAC settings, fix BUG double click Caton 4, A screen to adjust touch [test] 5, and amendments to the call sound, adjust the volume recovery
http://www.mediafire.com/?esc1f7ci7z5crrr
Thanks for sharing, downloading
sewa2k said:
Thanks for sharing, downloading
Click to expand...
Click to collapse
Np..as i said lets give some power to our forum...its a bit slow but i will reuploaded when it finished!!
Testing, will post results later
http://www.wupload.com/file/2671411342/update-cm-7.2.0-RC0-u8800pro-Geno-120306.zip
Mirror
Siauka said:
Testing, will post results later
Click to expand...
Click to collapse
Updated from previuos ROM (120202) wiping only partition cache and dalvik cache, I don't know what is wrong but ROM was really laggy, USB storage mode didn't work, so I'm backing up to previous version. Maybe should try updating with full factory reset, but it would be to weird.
with full wipe USB mount storage working normally.
flashed this firmware but do not see any changes.
subzverb said:
with full wipe USB mount storage working normally.
flashed this firmware but do not see any changes.
Click to expand...
Click to collapse
Geno didn't give any changelog at least a good change log few minor fixes look first post just simply post it today with ics rom!!
pikachukaki said:
Geno didn't give any changelog at least a good change log few minor fixes look first post just simply post it today with ics rom!!
Click to expand...
Click to collapse
maybe he just changed data in the name of file ?
subzverb said:
maybe he just changed data in the name of file ?
Click to expand...
Click to collapse
CM updated the Lunar amendment sonic boom amendment, music player, SD card mounted to the probability of failure
Translated this is his changelog...fix some lunar calendar and something about music and sd...who know..geno's cm's are great as allways!!
What about the sound, still ****ed up?
I don't know, but I wish to know if in next updates it's possible to keep data, because it's very annoing to reinstall all apps from titanium backup (free).
I have update my old Ideos (U8150) today and I don't wipe anything.
Good work to all devs!
Found this rom has update:
released 12-03-07
Update the kernel correction WIFI connection, audio adjustments
dl(dot)dbank(dot)com/c0fteawj55
replace (dots) by . to enable url.
I am a new user and cannot paste links
yrxe said:
Found this rom has update:
released 12-03-07
Update the kernel correction WIFI connection, audio adjustments
dl(dot)dbank(dot)com/c0fteawj55
replace (dots) by . to enable url.
I am a new user and cannot paste links
Click to expand...
Click to collapse
Did you test it?
Filatov.p said:
Did you test it?
Click to expand...
Click to collapse
This is geno cm but there are no big changelog so i didn't upload them!!if you wanna use them feel free!!
pikachukaki said:
This is geno cm but there are no big changelog so i didn't upload them!!if you wanna use them feel free!!
Click to expand...
Click to collapse
It would be better if i had never done it... Stuck on Huawei flower after installetion. Nevermind, waiting for Aurora updates
Using this rom for more than two days.
No bugs found.
No restarts.
Antutu result with 1ghz 3105
with 1.5 ghz 3948
Wifi working as expected.
haven't found something wrong with sound, actualy could you point me what was wrong with it?
No exceptional battery drain noticed.
I am happy with it! however I am very waiting for kernel 3 for aurora
When the screen turns off, so does wifi for some odd reason. Is it just me or does anyone else have that problem?
Sent from my iPad using Tapatalk
Yes, march 6 update has wifi error.
However fix was provided day later by geno.
dl.dbank.com/c0fteawj55
here is link for fixed rom.
Using since last week.
yrxe said:
Yes, march 6 update has wifi error.
However fix was provided day later by geno.
dl.dbank.com/c0fteawj55
here is link for fixed rom.
Using since last week.
Click to expand...
Click to collapse
Can I just flash over without wiping data?

Evervolv-Perdo-2.1.0p12-passion wifi issue

I noticed some people had issues with wifi with this update in the Evervolv's Aosp TexasIce Cream Sandwich thread below (unfortunately I cannot post there until I get to 10 posts):
http://forum.xda-developers.com/showthread.php?t=1366897
I had the same issue initially, then choose the Forget network option, did a reboot, and then added the network manually (I had to anyway with my hidden network).
Then the network did its thing. Hope this helps
shodan2011 said:
I noticed some people had issues with wifi with this update in the Evervolv's Aosp TexasIce Cream Sandwich thread below (unfortunately I cannot post there until I get to 10 posts):
http://forum.xda-developers.com/showthread.php?t=1366897
I had the same issue initially, then choose the Forget network option, did a reboot, and then added the network manually (I had to anyway with my hidden network).
Then the network did its thing. Hope this helps
Click to expand...
Click to collapse
I will copy your message and bring it to the other thread on your behalf
Thanks!
I cant find the wifi forget option though.
In my case it won even turn on the wifi and therefore it cant find any.
Was searching for the wifi forget option in the wifi settings -> advanced, but could not find it.
Really curious of what to do exactly to make it work again.
Thanks in advance.
KJS021 said:
Thanks!
I cant find the wifi forget option though.
In my case it won even turn on the wifi and therefore it cant find any.
Was searching for the wifi forget option in the wifi settings -> advanced, but could not find it.
Really curious of what to do exactly to make it work again.
Thanks in advance.
Click to expand...
Click to collapse
In my case it started to work after I installed tiamat kernel back after p12 installation wthout wipe. But since rotation and ksm in tiamat do not work yet, I decided to make wiping. So after fastboot -w, and clean install of p12 it works again.
dolphin77 said:
In my case it started to work after I installed tiamat kernel back after p12 installation wthout wipe. But since rotation and ksm in tiamat do not work yet, I decided to make wiping. So after fastboot -w, and clean install of p12 it works again.
Click to expand...
Click to collapse
Did a clean install and reflashed tiamats kernel and nothing worked.
Some people say that comming from p11 and straight away to p12 works just fine.
Thanks though.
---
This worked:
1. Wipe everything 3 times - reformat sd card
2. Install p11 - start it up
3. Install p12 right over it, dont wipe anything.
4. Enjoy the wifi
Thanks for the forward taodan. Hopefully won't be long until I can post there.
KJS021: When you're in the WiFi settings, press & hold on a connected network & then you get the option to either 'Forget network', or 'Modify network'.
Other info:
I started fresh with p11 (ran it for a couple of weeks), then updated to p12 without wiping anything.
I had wifi enabled with the icon appearing, but my network couldn't connect.
Google stuff played up, so next reboot was with gapps reinstalled.
Then I tried the network again & with wifi enabled I couldn't even get the icon appearing. I tried to re-add the network but still no luck. That's when I chose to 'Forget network' & give it a reboot. Then I added the network manually & mysteriously the network connected and the rest is history..
Other weird things that have happened in p12:
Google Maps crashed. A pop-up every few seconds kept informing me of this. I uninstalled Maps (which gave me factory Maps, before the update that is), then I cleared data just because.. Reinstalled from the market & all was good again.
Gallery wouldn't launch from my shortcut. Thought there was an issue, but found the gallery working through another app. Removed the Gallery shortcut, re-added it & that did the trick.
1 random reboot early in the piece, as well as 1 screen lockage I couldn't break out of. It's been good all day today though.
Misc Rants:
Also running A2SD (really needed with this rom) with 1GB ext4. One of the biggest issues I've had to deal with. Formatted my damn card various ways and just wouldn't seem to mount. Still not sure how I exactly got it working, but it wasn't long after I upgraded to the CWM recovery in texasice's downloads (CWM 5.0.2.7), even though I formatted the card elsewhere.
Other Specs: Radio: 5.12.00.08, everything else was done as in the OP of the proper thread.
Loving the rom so far, most things have been running fairly slick for me.
Waiting on the camera/video stuff to be fixed, and also pinch zoom to be smoothed out.

[Q&A] Task650's AOKP (AT&T)(SGH-I337)

This thread has been created strictly for
Questions and Answers​
[SIZE=+2]Dealing with[/SIZE]​
AOKP JB/KitKat ​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[SIZE=+2]This thread has been created for people to share issues and question they may encounter while using this version of AOKP[/SIZE]​
[SIZE=+1]Please Do not clutter the Development thread with non related development chatter[/SIZE]​
PLEASE make sure to thank task650 for his dedication to this body of work​
Thanks to all the members of XDA and Task's threads, credit goes to everyone as I have just taken info from users input and located it to one place. Thanks to you all for helping us learn everyday
.
Please read the OP in dev thread carefully on latest update, it has some very important info in it.
​
BUG REPORTING: Very minimal at least read the thread from the date of the update you are running. If you see a couple posts about a paticular bug then consider it noted by devs. They do read these. Remember if they can't duplicate the problem then they sure as hell can't fix it. IF you are going to report a bug - include the necessary information or it will be ignored.
thanks for understanding that after a few bug reports are made and i acknowledge them, that the unecessary 100 that follow are ridiculous. Task
Always read the OP. If it says full wipe then do a full wipe. If you don't follow the OP please don't post problems. This isn't helping anyone. Full wipe isn't a big deal. You can backup and restore your launcher settings with Nova or Apex, Backup and restore apps with Titanium backup(pro has the batch feature and is worth the money) and you can backup and restore most of your AOKP settings with AOKP backup. ***AOKP BACKUP can cause issues when restoring. If you have errors after restoring with AOKP BACKUP try the process again without using it.*** Using these three methods takes about 10 minutes. This is barebones backup/restore. If you have a lot of tweaks and kernel changes it will take you longer. So as stated in the OP if you have problems do a full wipe before you report any problems.​
Read the change log. This will answer a multitude of questions.
This is for the AT&T version of the Galaxy S3. This rom may work on different variants of the phone, but as for now Task and Ktoon do not have the time to support other versions. If you are on a different version of the Galaxy S3 and report a bug please understand that this ROM is AT&T supported only.
This is just to help Task and Ktoon keep repetitive questions out of there thread. If any information in this post conflicts with Task and Ktoon's OP or ROM thread then ALWAYS follow their information first.
Below is am alphabetized list of FAQ, bugs, known issues and tips.
This is just a collection of answers that have been posted in the thread. Use as a guideline not as a rule of thumb. Always follow the OP.
Read this>>>>>>>http://forum.xda-developers.com/showpost.php?p=38843439&postcount=24316
Annoying (small issues) repeatedly posted about
AOKP BACKUP
App FCing, freezing or causing reboot or just not working properly
2g Toggle
Black screen/Phone locked up/Can't wake​
Battery life
Bug Reporting
BlueTooth
BenchMark Scores
Canadian LTE
Capacative Buttons
CM10
CRT animation
Data working
Data connection speed symbols
Error 7 in recovery
POST 2
External SD card
Facebook​
FAST CHARGE​
Faux Sound​
Flicker​
Full wipe per task/Weird ****.​
Gapps​
Google Now/Google​
GPS​
Home Screen/Home Button​
Inverted Gapps​
IRC channel for task - ##Task650_AOKP​
Kernel​
LED​
Links/External Links for ROM/Gapps​
LTE​
Modems​
OTA Update/Recovery​
OLD/OUTDATED versions of this ROM​
Performace settings​
Requests​
POST 3
Ribbons
Ringtone​
ROM control settings​
Rom Manager​
Screen shot​
Signal/WIFI colors​
SMS/MMS​
Sound/Volume​
Swag (Pink Hat)​
Themes​
Toggles​
Touchwiz​
Voicemail​
WiFI/Tether​
WIFI/Signal colors​
Useful links​
Annoying bugs/glitches reported
Bluetooth Connectivity issues
Allow device to disconnect then turn off bluetooth
Gapps has been changed - make sure you flash the newest in OP and update google search through play store.
msm_otg wakelock usually happens while rebooting and plugged into a power source - remove power source and reboot while on battery only should fix this.
Disable touch sounds to avoid sound weirdness while listening to music or on the phone.
Phone freezing/black screen-try raising your minimum speed or just revert to a rom before the new 3.4 kernel was implemented. Try the 3-13 build.
cLock weather not updating - Either yahoo API change or a weather station down.
AOKP BACKUP
AOKP BACKUP is a great app for restoring most of your settings, but may cause some issues.
Third party app not working properly
This ROM has nothing to to with 3rd party apps. You would need to contact the developer of those respective apps to get support for them. You also need to understand that not all apps support the Jellybean 4.2.x OS yet and need to be updated by the developers in order for them to work correctly. task650
Trying clearing data for that app
If you used TIBU to restore app, clear cache and data and delete the app and download it fresh from the Playstore.
Some people are reporting third party camera apps not working correctly and/or causing stock camera problems. This could be true for a number of third party apps that could be conflicting with system apps.
If any given app/process is giving you problems or fc'ing- try clearning data for that app and/or fixing permissions.
Make sure you have the app updated to latest version. The existing version may not be up to date for 4.2.X or whatever version the ROM is.
If your app won't sync or no notifications - try logging out and then back in. Or try deleting the account and add it back.
2g toggle
If you can't get your phone to wake up-
Hold down the power button for up to 30 seconds - it will restart. You should not have to pull the battery after using this step to restart. It does work and may take a few times for you to get it right.
BATTERY LIFE:
We all at some time have been proud or dissapointed in our battery life, but please keep battery stats out of the development thread.There are threads for this and the Development threads are not one of them.
There are way too many variables that influence battery life to be concerned with in a DEVELOPMENT thread. This has been stated daily by the Developers.
Install betterbatterystats and figure out if the problem could be something causing a wake lock keeping your phone from entering deep sleep.
Go here to discuss BBS wakelocks and read the how to in the app. It is very beneficial.
It is a known fact that it may take a couple charge cycles for your battery to calibrate and settle in. Also it should be known that these batteries do not need the data cleared for them. THEY WILL CALIBRATE THEMSELVES.
If you are getting over 3 hours of on screen time on a single charge that is nothing to complain about. IF you do see a post in the development thread about battery life, ignore it. Once again, no one uses their phone the same and their set up is probably not going to influence your phone significantly.
Sometimes an app or process is just sticking and a reboot will help.
You could possibly see battery showing charging when not plugged in or a dramatic change after a reboot. Once again this is just the battery fuel gauge recalibrating itself. This is normal.
http://forum.xda-developers.com/showpost.php?p=20972167&postcount=3
For some good tips on fixing battery drain go HERE.
Bugs/reporting
Bug reports should contain a logcat or information that would help. saying this doesn't work or this is happening doesn't help us at all and at that point belongs in Q&A. task 650
Some bugs are being reported by a few that Task, Ktoon and others are not seeing. Follow avidmovies notes below on trouble shooting/comprehensive reflash and Task's suggestion above on weird sh!t. Stick to the basics and see if problem is there still - such as stay with kernel that is included with rom, skip restoring anything with titanium back up, other words just try the basics and if a certain app has been giving you problems download it from the market instead of TIBU and see if problem still persists. Some apps have been reported to make ROM features malfunction.
If you had a spontanious reboot, we need the file last_kmsg from the /proc folder.
If you have n FC on an app, thats when we want a logcat
Guide on how to logcat. http://forum.xda-developers.com/showthread.php?t=1726238
All In One Android Logger > AIOlog
Catlog - https://play.google.com/store/apps/detailsid=com.nolanlawson.logcat&feature=search_result#?t=W251bGwsMSwxLDEsImNvbS5ub2xhbmxhd3Nvbi5sb2djYXQiXQ..
If you do not have the latest update of this rom consider it unsupported. This is why they update- to get rid of the bugs that we may be having on older versions.
BUG REPORTING: Very minimal at least read the thread from the date of the update you are running. If you see a couple posts about a paticular bug then consider it noted by Task. He does read these. Remember if he can't duplicate the problem then they sure as hell can't fix it. Bug reports without a logcat or a random reboots without a last_kmsg will be ignored.
"Thanks for understanding that after a few bug reports are made and I acknowledge them, that the unecessary 100 that follow are ridiculous." Task
Just follow this practice and you will be golden.
If you see a bug reported once - go ahead and report it again with a LOGCAT or proper info.
If you see a bug reported twice and you are seeing it consider it a known bug and the following will probably happen-
Task has the same problem or enough info from LOGCATS provided and will fix it or
Task is not having the problem and can do nothing about it unless a LOGCAT is given
Point here is Task can't fix problems with out the proper information.
"Be patient for the galaxy s3 settings to be fixed." Task --- Some stuff is taken out, left out or temporarily removed for good reason.
If you are going to report a problem, include some details. Kernel, UC/OC, circumstances, etc...
Once again TALKING about a bug without the proper info including either LOGCAT or last_kmsg is nothing but A WASTE OF TIME.
Read THIS posted in the development thread by Task.
HOW_TO_PROPERLY_REPORT_A_BUG
BLUETOOTH
If your phone switches to vibrate when you connect to bluetooth. Check here
Settings>Rom Control > Bluetooth A2DP connected action
No action
Vibrate Mode
Silent Mode
Benchmark Scores
The devs have stated many times that these scores are BS. If you run a benchmark and want to discuss it, there are threads that are purely for discussing these random numbers. The development thread is not one of them.
CAPACITIVE BUTTONS
For instructions to disable capacitive buttons go HERE!
CM10
This is not a CM10 ROM nor is it based off one.
Comparing the two makes no sense. This is based off Google as is CM10. Other than that there is NO comparison. Please understand this. If something works or is in one rom doesn't mean it will work or is in the other.
If you want to compare CM10 and Tasks AOKP take it to the general section. A development thread is not the place for it.
CRT animation
If you put your animation speeds below .75 CRT will not work.
There are now toggles and more options for CRT - familiarize yourself with them.
DATA CONNECTION/SPEED
If you have no data after a flash, dont freak out.
Try rebooting
Make sure you have data toggle turned on.
Try toggling airplane mode
Check APNs.
If you have no APN's make sure your SIM card is in good and reboot.
If SIM card is not detected during a reboot - your APN'S will/could be blank.
DO you have your IMEI intact?
DATA SPEED PROBLEMS
Data speed can vary greatly depending on user traffic and distance from towers.
SpeedTest app is not a reliable source of accurate data speed
The ATT APN is being phased out by ATT. You need to use the ATT LTE APN - task650
Just because your stock ROM said 4G doesn't mean you actually had 4G/LTE. ATT roms report H/H+ as 4G where as this ROM gives you true data connection.
DATA Symbols
I flicker between H and 3g. AOKP shows true connection where as stock roms just show 4G. Also this rom controls data connection and kicks it down to 3G when not using data and kicks to H+ when you need it. This is a feature to save battery.
Blue symbols means you are connected to google servers - gray means you are not
Symbol equals>
G=GPRS
E=EDGE
3G=3G
H=HSDPA/HSPA
H+=HSDPA+/HSPA+
4G=LTE
You must have I337 recovery to flash this ROM or you will get error 7. task650
This is usually caused by a corrupt download, or bad file signature. Re-downloading (or re-signing) the ZIP will usually fix this - check MD5 sum.
Update or try a different recovery.
Remove the build assert in the updater-script.
Below is am alphabetized list of FAQ, bugs, known issues and tips.
This is just a collection of answers that have been posted in the thread. Use as a guideline not as a rule of thumb. Always follow the OP.
External SD card
Facebook​
FAST CHARGE​
Faux Sound​
Flicker​
Full wipe per task/Weird ****.​
Gapps​
Google Now/Google​
GPS​
Home Screen/Home Button​
Inverted Gapps​
IRC channel for task - ##Task650_AOKP​
Kernel​
LED​
Links/external links for ROM/gapps​
LTE​
MD5 sum​
Modems​
OTA Update/Recovery​
OLD/OUTDATED versions of this ROM​
Performace settings​
REQUESTs​
​
SD CARD
there is a known issue with apps being unable to write to the external card. Symptoms: you may be able to copy files to the external card or create folders using a file explorer, but apps (TiBu, Dolphin browser, camera, others can't use the external card as a save location, and you can't change properties or delete files/folders. You can still read files (i.e. restore existing backups from TiBu, play music) without problems. This is an issue with the JB build and they're working on fixing it. This does NOT affect CWM - you can still nandroid to the external card alacrify
Here is a guide for formatting external SD card without reader are here.
Guide_to_format_external_SD_card_without_reader.
Here is another way to format SD card http://www.online-tech-tips.com/comp...ive-to-fat-32/
My SD card is not working. Try this. EaseUS
Will my 64 gb sd card work? Except it works fine with a 64GB card. http://rootzwiki.com/topic/28124-doe...card-standard/ The SGSIII is the first phone to support exfatl, but the support is Kernel based, some people are having trouble with the replacement kernels and exfat support. The solution is to force it to format in FAT32. http://www.online-tech-tips.com/comp...ive-to-fat-32/ I know, because I've done it. --- Don't respond without actually doing research. I have no problem spoon feeding information, especially when the information you put out there can increase misinformation. The SGSII also supports a 64GB card as well. http://androidforums.com/samsung-gal...ing-sgsii.html
http://teamw.in/exFat
Facebook won't sync. Try Friendcaster or facebook_contact_sync.
FAST CHARGE
Storage options will not work with fast charge on.
FAUX SOUND
Faux_sound_in_Playstore
Task has added patches to be able to use this. It is worth the money.
Disable HW to stop flickering
Disable HW tick will not stick after reboot. This is the way it is suppose to be. This will still help with any type of flickering, usually.
If you are having some weird sh!t going on.
Redownload rom and gapps
Wipe data factory reset
Wipe dalvik and cache
In mounts and storage select Format System
Then flash rom and gapps
Reboot task650
Gapps
You must flash Gapps AFTER every flash of the ROM.
Use the Gapps in Task's OP or don't bring any problems caused from other gapps to his ROM thread.
Sometimes you may have to flash Gapps twice - they have been notorious for not taking the first time.
Read the OP to see if a new version of gapps is required.
Google now
Phone language has to be set to english for google now to work.
My google apps are working correctly. If it was just the play store force closing all you would've needed to do is reflash gapps. gapps is notorious for not taking the first try. but you always have to flash gapps after a rom install and make sure to clear cache and dalvik. no issues should occur if those steps are taken. Task. Make sure you are using the correct gapps!
Task and Ktoon do not support google wallet. There are fixes available but don't ask Task or Ktoon to fix it.
You can't remove the google search bar with default launcher but you can with nova or apex.
GPS
GPS not working correctly isn't always the ROMS fault. Sometimes its the satellites.
Make sure you have internel GPS selected.
Try flashing original stock and then come back to this rom if you have flashed a TW based rom.
To change your number of home screens
You must use Apex or Nova launcher, possibly some other third party launcher. But the default launcher will not allow you to do this.
You must use Nova or a third paryt home screen to disable search bar.
If you flash other things like inverted gapps or change things from the original packaging of this rom and something goes wrong or doesnt work. Think about it. We cannot support those issues here. This thread is for this rom and gapps that are posted in the OP. Thanks. task650
Inverted gapps are awesome but not supported in Tasks thread.
If you are using inverted gapps and having problems - full wipe and reinstall rom and gapps in the OP and see if problem still persists.
Go here for support of inverted gapps. > http://forum.xda-developers.com/showthread.php?t=2138156
IRC
Task has started and IRC channel for his rom. ##Task650_AOKP
KERNEL:
If you are using any kernel other than the one packaged with this ROM please post questions and problems to the appropiate kernel thread.
you need to understand that all devices are NOT created equally. one kernel might work awesome on my device while at the same time it may work horrible on your device. so to say that Ktoonsez says it works awesome, that means it works awesome for him. It has nothing to do with how it will work for you. If the symptoms that you're talking about are happening with that kernel it's obvious that your device doesn't like that kernel. Easy fix. Use a different one.
If you are using Ktoon's awesome kernel and experiencing problems, try reflashing with the kernel included with this ROM and see if the problem still persists. This may help understanding if the problem is kernel or ROM related and will help benefit development of both.You can full wipe and reflash rom and gapps to be back on original kernel.
If you wish to run another kernel other than what comes with the rom, Task suggest loading rom with included kernel, set up phone, then flash the kernel you want.
Governor/IO scheduler
Change these in performace control in settings
If you do not tick set on boot they will revert upon reboot.
This is a safety check in so you can try settings out before you make them permanent.
Last report in Feb is that Task uses row and interactive as his settings.
LED
LED charging works exactly as it should.
0%-%10 = Red
%10-%90 = Yellow
%90-100 = Green
You can't change the colors for LED Charging unless you download the source and rewrite that portion of code.
You can only change the colors for the Notification LEDs not battery indication color.
Make sure you have "pulse notification light" checked - uncheck to turn LED notification off.
Some colors will not work. Test LED color before relying on it.
Go here for some LED color talk. http://forum.xda-developers.com/showthread.php?t=1890774
DO NOT USE LIGHTFLOW WITH THIS PHONE - DOESN'T WORK WELL. LED CONTROL WORKS FINE ON ITS OWN.
To set LED for miss phones calls>>
choose Activities>Contacts>Phone/ activities.CallLogActivities
Please do not post links for Task's ROM or gapps. He wants to keep count of downloads. Thanks.
If you don't have LTE in your area it's not draining your battery.
AT&T is phasing out the old non LTE apn either way so we will all be using the same "LTE" apn. Network mode has nothing to do with you if your on AT&T service. That's only for the Canadians.
Also see 14 and 15 in FAQ post 1.
MD5 sum is located in goo.im via download link.
MODEMS
This ROM does not include a modem. You will have whatever you had.
Modems are location based. Try this and see which one works best for you.
Any modem questions should go HERE.
OTA Updates
OTA updater is a convienence. If you have problems using the OTA update just flash manually through CWM or TWRP.
CWM 5.5.0.4
cwm flashable
http://www.mediafire.com/?8rs5rq2a0ldhgut
TWRP X.X.X.X
http://forum.xda-developers.com/showthread.php?t=1793224
Read this >>>> http://teamw.in/androidmultiuser
Old/out dated versions
Go here> http://goo.im/ to get old/outdated versions of this ROM.
See Kernel for performace control
Task has added a slight OC/UC feature.
Use VOLTAGE_CONTROL for stable reliable control of these features
Task has stated this many times that it is what he uses.
Last report in Feb is that Task uses row and interactive as his settings.
REQUESTS AND ETA'S:
Do not ask for requests, ETA's, features or changes.
Donations are for if you appreciate his work. He will not turn this into a job.
DO NOT ASK FOR ETA'S. THIS IS ANNOYING AND ONLY HINDERS DEVELOPMENT.
Ribbons
Ringtone​
ROM control settings​
Rom Manager​
Screen shot​
Signal/WIFI colors​
SMS/MMS​
Sound/Volume​
Swag (Pink Hat)​
Themes​
Toggles​
Touchwiz​
Voicemail​
WiFI/Tether​
WIFI/signal colors​
Useful links​
RIBBONS
If you can't delete the icons in ribbons just use the menu and reset them.
Ringtones​
There is not a repeating ringtone on this rom(AOKP). Get a longer ringtone if you want more notification.
More RomControl Settings added
It will take some time to get all the rom control settings back in, be patient.
If you see a major update as in a new kernel, some items will take some time to be added back.
ROM CONTROL: This is a very customizable rom, please spend some time and learn the many features it has.
ROM MANAGER APP
It is advised not to use ROM MANAGER APP. Notorious for causing problems.
SCREEN SHOT
To take a screen shot hold volume down and power button at the same time.
You can add screenshot option to the power menu.
Changing the color of Signal and wifi only changes the color in text mode.
SMS/MMS
MMS not downloading
Some suggestions offered that have helped people with MMS.
Add "hipri" in your APN type and save. This has been reported by several people to help.
This is being seen on several phones with different roms and even iphones. Call ATT.
Try auto retrieve on.
Set Authentication type to "none"
In text client make sure "auto retrieve" is checked in all boxes.
This ROM does not having a problems sending MMS. It is most likely an ATT problem. But you can double check your APN to make sure it is not on your end.
If you are using a third party app to SMS/MMS it is not supported by Task.
If you want to use the quick reply option make sure you have it checked in settings.
SOUND/VOLUME
If you are not getting sounds on something check your quite hours.
Make sure you have not accidentally toggled silent/vibrate.
Take a look at THIS in the play store. It's awesome.
Swag Pink hat - It's a joke. Either you have it or you don't. As cool as Task makes this phone he can't actually help you in this area.
Themes
If you are having graphical glitches and using a theme, try removing any theme and see if it still persists.
CM10 themes should work on this rom but if you encounter problems do not bring it to the thread.
Go HERE for themes.
Toggles
Are located in ROM control
The toggle for DATA is called SIGNAL
TOUCHWIZ FEATURES:
This is an AOSP rom, touchwiz(sammy) features are not incorporated into this rom. Reason you ask? Framework!!!
Chances are something you want from TW is probably in the app store.
Voicemail number missing. Use your call forwarding number.
Try this for ATT visual voicemail.http://forum.xda-developers.com/showthread.php?t=1641981
If your wifi won't stay on while phone goes to sleep check settings to keep on during sleep.
If your phone sometimes drops wifi check settings and uncheck avoid poor connections.
These are found under advanced settings in WIFI.
If you are having problems connecting or using tethering try changing your SSID and try unsecured.
Most of the time lack of WIFI connectivity is usually cause by router settings or router itself.
ROGERS WIFI TETHER
Tether will not work on 4G/LTE unless you use a third party app.
Task can not test/fix since he obviously doesn't have a rogers phone.
Changing the color of WIFI/signal colors only changes the color in text mode.
Useful LINKS
BETTER_BATTERY_STATS]
AOKP_LED_COLORS
FIXING_BATTERY_DRAIN_ON_YOUR_S3
Titanium_Backup_User_Guide
Guide_and_Q&A_AOSP_LTE_ ​How to Update (Always follow OP directions)
Make sure you have CWM and/or TWRP Recovery
MAKE A NANDROID
Boot into recovery
Wipe data/factory reset, wipe cache, and wipe dalvik cache, then go into mounts & storage and format system!!!
(If already on AOKP JB/CM10 you should be able to just wipe cache & dalvik. If you have ANY ISSUES, FULLY WIPE BEFORE POSTING IN THIS_THREAD!!!)
Flash ROM
Flash Gapps
Reboot
Troubleshooting/Comprehensive Re-flash
(Optional, but recommended) Back up any apps you may want restored (Titanium Backup's batch mode (a PROfeature) makes this painless! Set TB batch filters to User type only. DO NOT RESTORE SYSTEM DATA! Hell, don't even back them up.
Re-download the latest version of the ROM and Google Apps (even if it's the same version you have) from the OP. It's possible you may have a corrupted download.
Reboot into recovery. Follow the process below exactly, and there should be no NEED for a kernel cleaning script.
Wipe cache partition
Advanced > Wipe Dalvik Cache
(Optional, but recommended) Mounts and Storage > mount /system & /data
Install zip from sdcard > choose zip from sdcard (wherever you saved the download) > Flash [ROM] AOKP Task & Ktoonsez Run a Train (version)(TGFY ONLINE!!!).zip
(Optional, but recommended) Mounts and Storage > mount /system & /data
Install zip from sdcard > choose zip from sdcard (wherever you saved the download) > Flash gapps-jb-(version)-signed.zip Jelly bean version only
Reboot
PS. Sometimes all that is needed is a reboot again. Doesn't hurt to try it.
Test ROM, BEFORE restoring *any data* (if you did a full reset). DON'T RESTORE SYSTEM DATA! You have been told twice!
Fixing permissions in CWM/TWRP helps fix MANY *random* glitches.
If you still encounter problems, do a FULL reset ( Recovery > Wipe data/factory reset) & follow the steps again. THEN, you can report issues!
You may have to redownload ROM and/or Gapps. Sometimes you can get a corrupt download that will cause issues. It happens.
Thanks to avidmovies for the above instructions from S II AOKP FAQ. (with small modifications)
Just in case i need more room....
Another just in case....
Pretty much everything is working great on this rom. Very fast and smooth and I like it a lot. I had one "issue" in that the google play store wont let me install Dungeon Hunter 4. It says it is not compatible with my device. I have tried resetting the pixel density and clearing the google play store cache, but that did not seem to fix it. Would anybody be able to check to see if it is available to download on the latest release? I already set everything up and was hoping to not have to wipe.
I'm having an issue with the volume of music I play in Google Play Music using AOKP and Underwear kernel.
Occasionally when listening to music, the volume will decrease somewhat, such as when an alert is going off. The problem is the volume will remain decreased when the event ends. The only way to get the volume to return to normal is to stop playback, kill the app, then start the music again.
I've tried wiping and reinstalling the recent release but the problem persists. I'm not sure if this is a problem with Google Play Music, or the Faux sound built into the kernel.
My status bar seems to have shrunk or shifted a bit since the update. The battery with center text has been shifted off. Any others seeing this? I feel I may have to wipe :/
Sent from my SGH-I337 using Tapatalk 4 Beta
fastblack said:
Pretty much everything is working great on this rom. Very fast and smooth and I like it a lot. I had one "issue" in that the google play store wont let me install Dungeon Hunter 4. It says it is not compatible with my device. I have tried resetting the pixel density and clearing the google play store cache, but that did not seem to fix it. Would anybody be able to check to see if it is available to download on the latest release? I already set everything up and was hoping to not have to wipe.
Click to expand...
Click to collapse
I'm still running stock, but rooted. Dungeon Hunter 4 also not compatible here.
vintagepimpage said:
I'm still running stock, but rooted. Dungeon Hunter 4 also not compatible here.
Click to expand...
Click to collapse
That's weird. I was running stock before and had it installed.
Sent from my SGH-I337 using xda app-developers app
spectrumfox said:
I'm having an issue with the volume of music I play in Google Play Music using AOKP and Underwear kernel.
Occasionally when listening to music, the volume will decrease somewhat, such as when an alert is going off. The problem is the volume will remain decreased when the event ends. The only way to get the volume to return to normal is to stop playback, kill the app, then start the music again.
I've tried wiping and reinstalling the recent release but the problem persists. I'm not sure if this is a problem with Google Play Music, or the Faux sound built into the kernel.
Click to expand...
Click to collapse
I have the same problem. It's not limited to Google Play Music as it happens when using Sound Cloud as well. I haven't looked around much to fix it as it doesn't bother me much...
Dyaus said:
I have the same problem. It's not limited to Google Play Music as it happens when using Sound Cloud as well. I haven't looked around much to fix it as it doesn't bother me much...
Click to expand...
Click to collapse
I have a strong feeling that Task's ROM is responsible for it, but I don't have much of a chance convincing him of it.
spectrumfox said:
I have a strong feeling that Task's ROM is responsible for it, but I don't have much of a chance convincing him of it.
Click to expand...
Click to collapse
If there's an issue, and you submit a logcat, and if it's a problem he can fix, he will. If it's a third party app that doesn't play well, he STILL might fix it because he does that. Have you done anything to troubleshoot and provided the information needed for him to look at it?
spectrumfox said:
I have a strong feeling that Task's ROM is responsible for it, but I don't have much of a chance convincing him of it.
Click to expand...
Click to collapse
I've had the issue since the first release of Task's ROM and I haven't tried any other ROM. I'm not too inclined to try out other ROMs to see if it's a ROM issue as the ROI is pretty low for me... But you should try out another ROM and report back.
So I realize in the OP it mentions TW features not working because of the framework. Does this include the camera? Is that a no go? I couldn't copy the camera.apk over and have it work? I've become a fan of the drama mode feature of the camera. Perhaps there is a camera app on the Play store that offers similar functionality? Either way I'm leaving the awfulness that is TW, but having the camera as part of an AOSP ROM would be a nice perk.
Audio Issue logcat
Here's a logcat grab from when the audio issue occurs. This is only the relevant portion of the logcat. The fillbuffer messages are generated during streaming of music so those can be ignored.
Battery with center text is still not aligned correctly after wipe
Sent from my SGH-I337 using xda premium
spectrumfox said:
I have a strong feeling that Task's ROM is responsible for it, but I don't have much of a chance convincing him of it.
Click to expand...
Click to collapse
Please stay on topic which is this ROM. Your personal opinions do not belong here. This is all open source. If you don't like something you are more than welcome to dig into the code and change whatever you like. I'm not a magician. I can't fix something without info.
pejhod said:
Battery with center text is still not aligned correctly after wipe
Sent from my SGH-I337 using xda premium
Click to expand...
Click to collapse
Yep. Its because of the status bar commit that was recently made. Its a work in progress.
spectrumfox said:
I have done all that for previous issues that I've encountered while using his ROM that he immediately shut down and started to blame on other apps I had installed on my phone. Honestly, his overall attitude and aire of superiority turn me off in doing real legwork to help him out with his ROM. Why should I make the extra effort to help point out an issue to him if he's just going to make excuses?.
Click to expand...
Click to collapse
From here on out I'm asking you to stop posting in my threads. You are the exact type of user that has no place in a development and/or support thread. You contribute absolutely nothing and all you seem to want to do is place your expectations of what you think I should or shouldn't do. Its not my job to fix everything for you dude. Its also up to you as the user to do you part. I gave you suggestioms of what needed to be done on your end and you seemed to refuse like you knew what that problem was from the beginning. Your personal opinions do not matter to me and I hope it shows. I'm not here to impress, do work for, or hold your hand through these things. If you don't want to contribute, don't. But don't post in any of my threads. Thanks.

no mobile data V20-h910 after dirtysanta+LOS ?

done: V20 unlock & root via dirtysanta
Everything else works, Wifi, calling, SMS, etc. - all good.
SIMs connect fine, with two different carriers.
But no mobile data. What to do?
TOC:
#2 diagnosis
#3 history: what I have tried
#4 links: possibly useful posts & threads
#5 what would have been wise: DO ALL POSSIBLE BACKUPS before you begin !!!
Suggestions please what else I can try.
diagnosis
some infos about the device:
h910
original state before I began: H91010I, Android security patch level: December 1, 2016
the h910 frequencies are definitely fine for carrier one or carrier two
Currently:
Device model: LG-h910
Android version: 7.1.2
LineageOS version: 14.1-20181128-NIGHTLY-h910
Android security patch level: 5 November 2018
Baseband version: MPSS.TH.2.0.1.c3 .... long ... [Sept 01 2016 13:00:00]
kernel version: 3.18.31-perf-g6662....
Build date Wed Nov 28 .... 2018
Build number lineage_h910-userdebug 7.1.2 NJH4 ...
Earlier (see below) I could get the *#546368#*915# menu (which should now have become *#546368#*910# right?), but now nothing happens anymore. Is that overwritten by LineageOS?
What I get now is *#*#4636#*#* with this info:
IMEI: Same as on sticker under battery
Phone number: correct
Current network: Telekom.de
Signal strength: -103 dBm 5 asu
Voice service: In service
Data service: Connecting
Voice network type: UMTS
Data network type: UMTS
Voice call status: Idle
Roaming: Not roaming
Set preferred network type: LTE/UMTS auto (PRL)
Run Ping test: Hostname IPv4: Fail(2)
Run Ping test: Hostname IPv6: Fail(2)
Run Ping test: HTTP Client Test: Fail: IOException
What else can I read out, to help you diagnose it?
Thanks!
what I have tried
some of the things that I have tried so far:
dirtysanta via JustRunMe.cmd script (finally worked when I had found out all these 5 hints)
LineageOS-14.1, quite some app install and configuration work, and then a TWRP backup.
... only days later (because ill always at home) suddenly realized: Oops, I have no mobile data!
bricked when trying to flash some stock ROM
(unpatched) LGUP refused any KDZ but this one "h910PR" (PuertoRico? Claro branded), so I flashed that. But then not even a carrier signal. And not dirtysanta rootable.
Patched LGUP - hint: specific path
Patched LGUP: Complete dump (of that dysfunctional state, but perhaps some of my original partitions are still in there?)
Patched LGUP: flash h915 KDZ "H91510e_00_VTR_CA_OP_1205.kdz"
dirtysanta, same as above, but with newer TWRP
TWRP --> h910 firmware "h910-10r.zip", see this thread. Resulted in faulty state, frequent app crashes; EULA crashing, so I could not even get to USB debugging settings. Gave up. Instead:
TWRP --> restored my previous LineageOS from above.
Whew, happy to have most functionality back after that horrible odyssee - but still no mobile data. Any ideas what else I can try?
useful pages
possibly useful threads and posts that I found while searching for solutions and trying all kind of things
complicated instructions to "fix signal and data (h910 only)" - not tried yet.
ARB *#LGMENU#*910#
patchedLGUP --> h915 --> TWRP --> h910? Tried that, but then lots of apps crashing, incl. EULA crashing, i.e. could never get back to USB-debugging; decided to restore back my initial LOS backup instead
h910 return to stock
perhaps flash modem and operatorlogging - but where to get them from, as I have no own dump from before.
*#*#4636#*#* = hidden menu under LOS
...
... = more to be added, unready
"after a battle, everyone is a general"
It would have been clever to do these two things initially, before I even started:
complete dump with "patched LGUP" (see hint above about the only allowed PATH for unpacking)
then I would have a copy of my whole phone now - but that ship has sailed.
(Anyone who can help me, providing me with some of the original partitions, please contact me, thanks!)
Then, as soon as I was in TWRP it would have been clever to do
a complete TWRP backup
I dimly remember to have actually tried that, and a lot of the partitions did not work to be backuped within TWRP, not EFS or anything else? (possibly because the dirtysanta JustRunMe.cmd method had flashed a 996-TWRP onto my h910 ? Or for whatever reason, ...) I could not backup them, so my earliest TWRP backup (more than two weeks ago *sigh*) sadly only contains ONE partition "system" which is the original system plus dirtysanta.
I do have a later EFS + firmware partition TWRP backup. Later = after LineageOS installed already. Without that backup, I would not have gotten the carrier signal back. But it stll does not seem enough to give me mobile data ... ? What am I missing?
What might help you to understand why I did neither backups: I would have never in my wildest dreams imagined that, more than 2 weeks later, I would still be struggling with this one limited task, to simply unlock & reinstall a phone. Sorry, I completely underestimated the complexity of this whole endeavour. My hint to you: Treat it like an open brain surgery on your only child. Yes, BEFORE YOU START, you want any backup imagineable, even if it takes you days to find out how exactly to execute that backup. This is not easy klte Samsung s5; this LG stuff here is a whole different ballgame. TAKE IT MORE SERIOUS. Do backups first!
May your phone not get wasted. And may my own phone perhaps still get saved somehow ... Thanks for any idea you have for that!
----
Edit:
oh wow, this looks SUPEREASY "partitions backup & restore" https://play.google.com/store/apps/details?id=ma.wanam.partitions = BACKUP EVERYTHING, SIMPLY FROM AN APP. Only works after rooting, but that should be the first thing you do then !!!!!!
In short: All working, but no mobile internet. Any ideas much welcome.
Have you checked your apns?
Thanks.
me2151 said:
Have you checked your apns?
Click to expand...
Click to collapse
Yes.
But checked again now:
APN "reset to default". There were 6 different apn settings. I let the phone decide.
then I chose the one that their homepage explained to be the right one.
then I put the SIM into some stock ROM phone (where I got mobile data just fine with that SIM), wrote down all APN settings, swapped back the SIM into the v20, and entered a manual APN with those exact settings.
In all cases - No mobile data.
What can I try next?
anyone new ideas?
ankade said:
done: V20 unlock & root via dirtysanta
Everything else works, Wifi, calling, SMS, etc. - all good.
SIMs connect fine, with two different carriers.
But no mobile data. What to do?
TOC:
#2 diagnosis
#3 history: what I have tried
#4 links: possibly useful posts & threads
#5 what would have been wise: DO ALL POSSIBLE BACKUPS before you begin !!!
Suggestions please what else I can try.
Click to expand...
Click to collapse
What about manually inputting your telcos apn details o see if that will switch it on. I know my telco here in aus has about 4 different apn's
ksiecasey said:
What about manually inputting your telcos apn details o see if that will switch it on. I know my telco here in aus has about 4 different apn's
Click to expand...
Click to collapse
Yes, I have tried that. No mobile data.
Any other ideas?
ankade said:
Thanks.
Yes.
But checked again now:
APN "reset to default". There were 6 different apn settings. I let the phone decide.
then I chose the one that their homepage explained to be the right one.
then I put the SIM into some stock ROM phone (where I got mobile data just fine with that SIM), wrote down all APN settings, swapped back the SIM into the v20, and entered a manual APN with those exact settings.
In all cases - No mobile data.
What can I try next?
Click to expand...
Click to collapse
Hmmm could be that your Arial plugs might be misaligned or not connecting properly though that's a long shot. I've bought a few of these lgv20s and one had a faulty Arial which I fixed through removing the bottom wedge slot of the phone and patching it up. Telco antenna is the bottom right gold plugs if I remember correctly. I also take out the mesh in between the bottom speaker which increases the speakers volume somewhat... But I digress... When entering the apn manually there is usually a setting that says to leave empty e.g 'authentication' ~none~ which you have to actually select 'none' not just leave it blank. That's gotten the better of me many times now...
---------- Post added at 09:58 PM ---------- Previous post was at 09:43 PM ----------
ankade said:
Yes, I have tried that. No mobile data.
Any other ideas?
Click to expand...
Click to collapse
So your running at&t phone? I flashed the alpha Omega Oreo 8.0 rom and it works beautiful. I did the dirty santa root using patched lg up to flash 915kdz then as soon as twrp is on the phone I flash straight to alpha Omega rom. No return to stock options because I'm lazy . I've done it to 3 v20s now and though the first root was timely...boot loops ect... It was only because the phone is a finnicky one to root.
The link for alpha rom. Make sure you have an SD card that's formatted to the specified setting. Don't make the stupid mistake I did with my 256gb SD card which I left in the phone while flashing the room and kernal........ Lucky there's a program called 'recuva ' which saved most of my filesystems but now the card is a jumbled mess of **** everywhere lol. Live and learn...
https://forum.xda-developers.com/v20/development/alpha-omega-rom-oreo-vs995-h910-ls997-t3847510
---------- Post added at 10:21 PM ---------- Previous post was at 09:58 PM ----------
It also might be that your at&t apps 'permissions settings ' may need to be resset or maybe updated? I'm still slowly figuring out which system and AT&T apps ect I can safely remove which won't affect the phones various call function s for use in AUS. I had an interesting failure using debloater software which resulted in me apparently uninstalling something I shouldn't have which caused the second screen to stop working and thus a phone resset.
---------- Post added at 10:53 PM ---------- Previous post was at 10:21 PM ----------
ksiecasey said:
What about manually inputting your telcos apn details o see if that will switch it on. I know my telco here in aus has about 4 different apn's
Click to expand...
Click to collapse
Oh I almost forgot!!! Make sure you turn on developer mode and USB debugging /oem unlock too!
Thanks a lot, ksiecasey. Answer 1:
ksiecasey said:
Hmmm could be that your Arial plugs might be misaligned or not connecting properly though that's a long shot. I've bought a few of these lgv20s and one had a faulty Arial which I fixed through removing the bottom wedge slot of the phone and patching it up. Telco antenna is the bottom right gold plugs if I remember correctly. I also take out the mesh in between the bottom speaker which increases the speakers volume somewhat... But I digress...
Click to expand...
Click to collapse
I have tried to find it now. Please have a look:
Is this the "bottom wedge slot" ?
https://i.imgur.com/6XvoF5H.jpg
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
With ~8 screws removed, I could still only lift one side up, the one with the loudspeaker.
See this:
https://i.imgur.com/pKQTVf0.jpg
Where exactly is the Aerial you are talking about?
Also ... if the Aerial were the problem, then would not I have no cell reception at all? Sorry, but I don't understand phone tech well enough yet.
I do have cell signal, I can call out, receive calls, send and receive SMS, etc. - but no mobile data, regardless what I tried.
Thanks a lot, ksiecasey. Answer 2 / 2 :
ksiecasey said:
But I digress... When entering the apn manually there is usually a setting that says to leave empty e.g 'authentication' ~none~ which you have to actually select 'none' not just leave it blank. That's gotten the better of me many times now...
Click to expand...
Click to collapse
Good to know.
I have checked the APN settings again. Wrote it all down when that SIM in a 2nd phone, then input all information onto an APN setting on the sick V20.
The only such place is "Authentication type", and it has to be set not to "None" but to "PAP". (Or rather, I have just tried it out, it does not matter whether it is set to "None" or to "PAP" because both works, and it is set to "PAP").
All the other places either have a value set, or "not set", which is an empty entry.
How do APNs work in general?
I had always assumed I need only ONE of those APN settings (the one which is "enabled" via radiobutton). Is that correct? Or do I have to input all 9 APNs? I have just done ... Mobile Network settings ... Access point names ... three dots menu ... Reset to default. Now (on the stockrom-data-working-fine-phone) I see 9 APNs, seven of which have a radio button, and one of them is enabled. I only need that one APN settings, right?
ksiecasey said:
So your running at&t phone?
Click to expand...
Click to collapse
Yes but no. Yes, is h910 hardware, but no, I am running LineageOS. See #2 diagnosis. However, I got there on a rather convoluted way, see post "#3 History".
ksiecasey said:
I flashed the alpha Omega Oreo 8.0 rom and it works beautiful. I did the dirty santa root using patched lg up to flash 915kdz then as soon as twrp is on the phone I flash straight to alpha Omega rom. No return to stock options because I'm lazy . I've done it to 3 v20s now and though the first root was timely...boot loops ect... It was only because the phone is a finnicky one to root.
Click to expand...
Click to collapse
Yes.
I might try alpha Omega Oreo 8.0 rom when I find the time for it. But while I was on that odyssee described in post #3 , I always tried, and I did not have mobile data nowhere. But perhaps it is worth the try, to also flash AlphaOmega, and see if it's actually the v20-LineageOS which is f***ing up the mobile data. In between I had also tried the October LineageOS instead of the November LineageOS, but both give no mobile data on my device.
ksiecasey said:
Make sure you have an SD card that's formatted to the specified setting. Don't make the stupid mistake I did with my 256gb SD card which I left in the phone while flashing the room and kernal........
Click to expand...
Click to collapse
Please point me to that info, about the "SD card specified setting", I could not find it in that thread, sorry.
ksiecasey said:
It also might be that your at&t apps 'permissions settings ' may need to be resset or maybe updated? I'm still slowly figuring out which system and AT&T apps ect I can safely remove which won't affect the phones various call function s for use in AUS.
Click to expand...
Click to collapse
I am not running AT&T, but LineageOS.
Which "permission settings" could prevent getting mobile data?
Where in LineageOS (or more general in Android) do I "reset all permission settings" ?
Thanks a lot!
For future reference this is where the mobile reception antenna is located. I'm swaying more towards thinking it's the liniage rom which is the 'root' ?of your problems.. download the Omega rom which is the same as your actual original phone. As long as you have twrp on your phone you should be good.
ksiecasey said:
For future reference this is where the mobile reception antenna is located. I'm swaying more towards thinking it's the liniage rom which is the 'root' ?of your problems.. download the Omega rom which is the same as your actual original phone. As long as you have twrp on your phone you should be good.
Click to expand...
Click to collapse
the arial actually runs along the inside of the plastic cover and when i recieved this phone through ebay from hongkong (260$) bargain lol the contacts werent touching so i soldered a thin copper piece to the inside of the end cap and voila! also if your interested, the wifi arial is in line with the mobile arial but on the other end or at the top of the phone.
about the sd card..... i believe it says somthing as you start the actual rom flashing about that.
this pic sshows mobile data working on my phone
ksiecasey said:
the arial actually runs along the inside of the plastic cover and when i recieved this phone through ebay from hongkong (260$) bargain lol the contacts werent touching so i soldered a thin copper piece to the inside of the end cap and voila! also if your interested, the wifi arial is in line with the mobile arial but on the other end or at the top of the phone.
about the sd card..... i believe it says somthing as you start the actual rom flashing about that.
this pic sshows mobile data working on my phone
Click to expand...
Click to collapse
also to make patched lg up work properly it MUST be installed in the right place { see photo}
this caused me much grief in the past sigh*
i lost data and signal after every new rom instal. What i need to do was to flash modem, modemst1 and modemst2 through fastboot to get back signal and data, but it only works on stock nougat rom.On oreo rom i get back only signal but no data.Now i am using super rom https://www.super-rom.ga/# , where i have signal and data without need to flash dumps. Only thing i need to do is set apn.
Thank you two sooooo much, great infos. Sorry: Super busy with other things right now. But I will definitely try all this as soon as I can.
Looks like LineageOS for the V20 is faulty?
ksiecasey said:
I'm swaying more towards thinking it's the liniage rom which is the 'root' ?of your problems..
Click to expand...
Click to collapse
Peter911 said:
i lost data and signal after every new rom instal. What i need to do was to flash modem, modemst1 and modemst2 through fastboot to get back signal and data, but it only works on stock nougat rom.On oreo rom i get back only signal but no data....
Click to expand...
Click to collapse
I bought a V20 to use LineageOS, and "signal but no data" is not what I expected, but perhaps that is only me lol.
How can we get that information onto the official pages? So that people are warned before? e.g.
* the lineageos page https://wiki.lineageos.org/devices/h910/install
* perhaps here too? https://forum.xda-developers.com/v20/development/dev-cm14-t3509953
* where else?
Any ideas how to add information to that LOS page?
I have the exact same issue as you, I bought a brand new V20 and got it rooted with the very first guide by me2151 to then install LOS 18.1. Everything works but mobile data. Longer explanation in this post.
Did you manage to find a solution ? I'd rather get on some track from someone experienced and knowledgeable than to start reinstalling for likely nothing.

Categories

Resources