Database Users

please help me !

hey ,
i have i9500 galaxy s4 4.4.2 . yesterday i flashed by mistake [my stupidity...] the non latestest stock rom , with the maxfour v15 kernel - which went fine , but after that i had no signal.
now i flashed the latest stock rom which is - I9500XXUGNH4_I9500OJKGNI1_I9500JKUGNH1_HOME.tar.md5.
my imei match the imei number behaind the battery , and when i search for networks , i find my carrier , but i try to connect it says "not registered on network".
i had an imei not match problem in the past with the same current phone .
what do i need to do ?
flash a new model ? , what modem do i need ? [i from israel if it matters]
please help me ! im desperate!

Flash the same firmware again. Probably not all parts of the firmware were updated.
Sent from my black pearl using Tapatalk

I flashed the 4.4.2 newest stock kernel three times .
no change/...
please help !!! :crying::crying:

[email protected] said:
I flashed the 4.4.2 newest stock kernel three times .
no change/...
please help !!! :crying::crying:
Click to expand...
Click to collapse
bro first of all relax and download any custom rom and flash it via recovery say cynogenmod etc..then let it start and check whether you can connect to network if its fine then your hardware is perfectly safe and goahead with flashing the stock rom you downloaded (consider redownloading it to be sure) and flash it and you would be fine

Kushan02 said:
bro first of all relax and download any custom rom and flash it via recovery say cynogenmod etc..then let it start and check whether you can connect to network if its fine then your hardware is perfectly safe and goahead with flashing the stock rom you downloaded (consider redownloading it to be sure) and flash it and you would be fine
Click to expand...
Click to collapse
how will flashing a costum cynogenmod rom will fix this problem?

[email protected] said:
how will flashing a costum cynogenmod rom will fix this problem?
Click to expand...
Click to collapse
because installing a custom rom by fully formatting phone will delete any corrupted files that are causing the error and when you will flash the official rom it will intsall as a new clean rom and will work without any problem

Kushan02 said:
because installing a custom rom by fully formatting phone will delete any corrupted files that are causing the error and when you will flash the official rom it will intsall as a new clean rom and will work without any problem
Click to expand...
Click to collapse
i installed the cynogenmod rom [now i have 4.4.4] . problem NOT resolved.
my imei is good . i really dont know what is the problem ... please help me !

[Q] gt-s5369 vodafone recovery

hello there,
i'd like to recovery my samsung young gt-s5369 vodafone by official firmware, but i can't find the right thread. i'm looking for instructions to know which are all the files i have to download and then i need to download them from active, safe link.
Might someone indicate me where i could post that question?
Thnk you for your supply

Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck

gt-s5360 = gt-s5369 vodafone?
carparozzo said:
hello there,
i'd like to recovery my samsung young gt-s5369 vodafone by official firmware, but i can't find the right thread. i'm looking for instructions to know which are all the files i have to download and then i need to download them from active, safe link.
Might someone indicate me where i could post that question?
Thnk you for your supply
Click to expand...
Click to collapse
My post about gt-s5369 (vodafone) was moved into this section, so i think the firmware i was looking for is the same for gt-s5360. But i'm a newby, so i know many people who tried to install that firmware didn't solve the problem, because phone could not call after that operation.
So i'd be sp happy if someone indicates me the right link to get the firmware (all files) to recovery my phone (in a way to work):crying::crying:
thank you so much

carparozzo said:
My post about gt-s5369 (vodafone) was moved into this section, so i think the firmware i was looking for is the same for gt-s5360. But i'm a newby, so i know many people who tried to install that firmware didn't solve the problem, because phone could not call after that operation.
So i'd be sp happy if someone indicates me the right link to get the firmware (all files) to recovery my phone (in a way to work):crying::crying:
thank you so much
Click to expand...
Click to collapse
If you specifically want 5369 firmware goto sammobile.com and download the firmware for your phone
Then goto my thread
http://forum.xda-developers.com/showthread.php?t=2615434
You will need to use my guide to split the firmware into pda modem & csc to flash via odin

marcussmith2626 said:
If you specifically want 5369 firmware goto sammobile.com and download the firmware for your phone
Then goto my thread
http://forum.xda-developers.com/showthread.php?t=2615434
You will need to use my guide to split the firmware into pda modem & csc to flash via odin
Click to expand...
Click to collapse
Great! So now i have the right firmware :laugh:. Do you think Java SE Development Kit 7u75 could run into my win xp 32 (home edition)? i found for x64 only. thanks

carparozzo said:
Great! So now i have the right firmware :laugh:. Do you think Java SE Development Kit 7u75 could run into my win xp 32 (home edition)? i found for x64 only. thanks
Click to expand...
Click to collapse
Yes
x86 is for 32bit
x64 is for 64bit
Download the right version
The link to download page is on my splitfus guide

How to sim unlock Galaxy Note 3 SCL22 Lollipop 5.0?

I have Samsung Galaxy Note 3 SCL22 from au japan.
I have unlocked it before using service mode (*#0011#) when it was on Kitkat 4.4.2.
But after I updated it on Lollipop 5.0 I cannot unlock it using service mode because there is no menu anymore it is just end.
Is there any other code or way to access service mode.
Any other way to sim unlock my phone? THANKS!

Same problem here
Any solution pls

SCL22 on Lollipop
Same problem here, cant access the Service Menu and Can't use any sim in the Philippines.
Please somebody help us.

Probably found a solution in a Japanese forum. Though I haven't understand it fully (with google translate), but it can be something like this.
Do not upgrade the firmware from your phone (If you already did, then you can re-install it again with following procedure).
Instead download the official SCL22 Lollipop firmware from sammobile.com or somewhere else in your PC.
Extract the firmware and add "ServiceModeApp_RIL.apk" in /system/app/ directory. Probably we need to google a bit on how to rebuild a firmware. A starting point can be http://forum.xda-developers.com/showthread.php?t=2138885
Then install the firmware using Odin.
After installation, follow the unlock instruction for Kitkat 4.3, which I think you know already. They are also available in the Japanese forum too.
http://www.neko.ne.jp/~freewing/android/au_scl22_galaxy_note3_sim_unlock/
Note: The ServiceModeApp_RIL.apk download link is given in the Japanese forum. Or I think it can be extracted from the Kitkat 4.3 firmware files too. Once I followed this post (http://allthec.blogspot.com/2014/11/how-to-root-samsung-galaxy-note-3-scl22.html) to root my SCL22 Kitkat 4.4.2 which is specific to SCL22 only and very easy to follow, this should work for Lollipop 5.0 too, if you are interested to root your device. But rooting the device will not unlock the phone.
I haven't tried it in my phone yet. Can any of you try it and let us know how it goes. Hopefully it will work!

Awesome
Thanks tutul.net, I will try that out.
And the translation is terrible so I'll try with the little japanese I can read:
First Method:
　・Using odin flash SCL22KDU2FNF7
　・Unlock using the SCL22KDU2FNF7 method
　・Dont upgrade past SCL22KDU2FNF7
Second Method:
・Using Odin only flash the SCL22KDU2FNF7 modem
　・Extract the old version of the ServiceModeApp_RIL.apk and overwrite the new one (/system/app/ServiceModeApp_RIL.apk)
　・Using the Service menu, *#0011#, unlock with the old method
Now that I actually wrote all that out, looks like you were spot on. Thanks again!
I have had a note.3 as a paper weight for about a year now, maybe your advice will finally let me use it.
Also it was kind of biatch to get that apk, so I reupped it somewhere else for convenience hope it helps someone: ServiceModeApp_RL.zip

I'm having trouble with this and it's getting me really frustrated... did you eventually get it to work?
can you just flash the modem? isn't the modem supposed to be .bin file?
if you were able to successfully rebuild the rom with the fix, it would help me greatly if you can upload it somewhere
any help is appreciated

Did anyone manage to do this?
Basically you need a Linux base PC to rebuild a tar.md5
See links below for details:
http://forum.xda-developers.com/showthread.php?t=2138885&page=3
http://www.rwilco12.com/forum/showthread.php?tid=74
http://forum.xda-developers.com/showthread.php?t=2154762
http://www.rwilco12.com/forum/showthread.php?tid=92
http://forum.xda-developers.com/showthread.php?t=1750295
https://github.com/EpicAOSP/make_ext4

tutul.net said:
Probably found a solution in a Japanese forum. Though I haven't understand it fully (with google translate), but it can be something like this.
Do not upgrade the firmware from your phone (If you already did, then you can re-install it again with following procedure).
Instead download the official SCL22 Lollipop firmware from sammobile.com or somewhere else in your PC.
Extract the firmware and add "ServiceModeApp_RIL.apk" in /system/app/ directory. Probably we need to google a bit on how to rebuild a firmware. A starting point can be http://forum.xda-developers.com/showthread.php?t=2138885
Then install the firmware using Odin.
After installation, follow the unlock instruction for Kitkat 4.3, which I think you know already. They are also available in the Japanese forum too.
http://www.neko.ne.jp/~freewing/android/au_scl22_galaxy_note3_sim_unlock/
Note: The ServiceModeApp_RIL.apk download link is given in the Japanese forum. Or I think it can be extracted from the Kitkat 4.3 firmware files too. Once I followed this post (http://allthec.blogspot.com/2014/11/how-to-root-samsung-galaxy-note-3-scl22.html) to root my SCL22 Kitkat 4.4.2 which is specific to SCL22 only and very easy to follow, this should work for Lollipop 5.0 too, if you are interested to root your device. But rooting the device will not unlock the phone.
I haven't tried it in my phone yet. Can any of you try it and let us know how it goes. Hopefully it will work!
Click to expand...
Click to collapse
Hey, may I know if you have successfully rebuild the tar.md5? I think it will need a Linux Ubunto based PC to do this (see links I post below)

I have the same problem with my phone. Has anyone succeeded trying to unlock the service mode menu??

is there any update to this? i tried to install service mode ril but it says app not installed can someone help me?

xPritz said:
is there any update to this? i tried to install service mode ril but it says app not installed can someone help me?
Click to expand...
Click to collapse
have you try to unlock using custom firmware for scl22 5.0..
ive already done it and its working..

LG G2 d802t ( 32gb) ( Problem need help)

Hi
My LG G2 Was working very nice and then i install LGMobile Support Tool to upgrade my Device to lollipop. after update to lollipop my phone gone Mad. Dubble Tap problem in screen and sim not working on it. I need Rom to flash please suggest me rom i am newbie on this Hope Some Expert will help me
Phone made : Korea
Model : LG-D802T
Current County : Pakistan
Please help me i will really thank full to you

any help please ?

Download the stock KDZ from http://lg-firmware-rom.com/(or any other site by searching for 'lg firmware'. But this one is the best). You will need to give your IMEI number and then search on the site. It will provide you with a link to download the kdz file. Download it and then use LG Flash tool to install it. You can find the guide for flashing on xda. If all goes well you will boot into the latest OS available for your device in your country. However If for some reason u don't have lollipop for ur country, then you can install cloudyg2(based on lollipop 5.0.2. I am using it, its excellent). For that you can find the guide here : http://forum.xda-developers.com/lg-g2/general/complete-guide-convert-d802t-d802-t3184830 . Please do check my comments on the 2nd page of this link for correct installation without bootloops. Good luck

Thanks For the Reply
Problem solved By Market Dealer

hey Guys,Help me on my zte blade l3 urgently.Answer me,please...

hi,I have a zte blade l3 phone that i'd bought it from germany, (Mediamarket store).it has the Androild 5.0 os on it which the Build number : DIS_EU_B128DL_P182A20V1.0.1 and the kernel info is
Kernel v : 3.10.54 ([email protected]) (gcc version 4.8 (GCC) ) #1 SMP
unfortunately,i deleted some system files indeliberately that it doesn't boot... then i use sp flash tools to flash it again with the proper rom for this device.i downloaded a lot of roms from internet (for example:some of them i downloaded from 4pda.ru forum in the zte balde l3 section)then i was using the sp flash tool for flashing my zte.i choosed the scatter file. and after formatting and flashing the new rom,whenever, i want to turn on my zte, it just show the white screen..and i hear the sound of the booting logo, but, it stops on the white screen.
many people tell me, it's because of the Inappropriate rom which i used to flash.but, i couldn't find the proper official rom in the Eu region for flashing with the sp flash tools.---------
At now, i'm not in Germany.I want to know is there a solution remained for me returning to the situation before.How can I fix the problem to restore the phone to the normal status?
I hope You can Solve my problem.

zte blade L3 ROM
Hallo, I have read your post and I have same problems. I bought it in Saturn and I can't find EU ROM. All RO`s from 4pda have tried, same result: white screen, welcome sound that is all. So as I know our problem that we have formatted preloader and it not accept any other preloader from other ROMs. And solution is we have to ask guys who has a similar phone with android 5.0, to copy his ROM via SP flash tool read back function and share it with us. Then we can flash it in download mode by flashtool and its should work. But if you formatted your preloader your IMEI also erased, if you have imei bakup it's no problem, but anyway there many ways to restore imei. So I wish you good luck, and kindly ask you if you can find proper ROM share it with me also. I will do the same, hope somebody here will help to unbrick our ZTE blade L3. just ask juys like me maybe your German language helps, or you have some friends not in internet, you can ask them. There no risks for his phone, if you need I will help with step by step instruction how to copy his ROM. Good luck and thank you in advance!

Zte blade l3 white screen fix
Hi.did You fix this Issue and if ya, please help my olso fix that.,,,
REGARDS