Panasonic eliga switch 4G is the rebranded version of idol3 5.5. Can someone confirm? Can idol 3's Roms be used for eluga switch too?
niteshmc said:
Panasonic eliga switch 4G is the rebranded version of idol3 5.5. Can someone confirm? Can idol 3's Roms be used for eluga switch too?
Click to expand...
Click to collapse
Most likely they can. It is literally identical to the Idol 3 5.5(a dual sim variant).
The Marionette said:
Most likely they can. It is literally identical to the Idol 3 5.5(a dual sim variant).
Click to expand...
Click to collapse
I wonder if they have better/newer apps. Anyone found the location of their rom's?
just downloading the rom...will report
so here are some info:
it ocme sin a package of 1.3GB in form of exe file (Engineering Software Download Tool QCT_SP) . It unpacks to temp and contains another exe (among other files) which can be opened in 7zip and includes all partitions in form of .img files. But if i try to decompress it, it got some errors (unexpected end of file) in some img files (system, persist...).
And as I am flasher, I flash the firmware to my device right away.
It ended on 52% with error, so i unpluged my device, rebooted it and all works well so far.
I will make root and do TWRP bakcup.
panasonic name for firmware: EB-90S55EWLv1009
Android: 5.0.2
dialer: 5.1.3.3.0039.0
camera: 5.1.11.0152.0
-also includes alternative launcher (see screenshots).
-Its dual sim firmware.
-all other things look same as stock, havent seen any new settings entry so far.
DallasCZ said:
so here are some info:
it ocme sin a package of 1.3GB in form of exe file (Engineering Software Download Tool QCT_SP) . It unpacks to temp and contains another exe (among other files) which can be opened in 7zip and includes all partitions in form of .img files. But if i try to decompress it, it got some errors (unexpected end of file) in some img files (system, persist...).
And as I am flasher, I flash the firmware to my device right away.
It ended on 52% with error, so i unpluged my device, rebooted it and all works well so far.
I will make root and do TWRP bakcup.
panasonic name for firmware: EB-90S55EWLv1009
Android: 5.0.2
dialer: 5.1.3.3.0039.0
camera: 5.1.11.0152.0
-also includes alternative launcher (see screenshots).
-Its dual sim firmware.
-all other things look same as stock, havent seen any new settings entry so far.
Click to expand...
Click to collapse
All useful info. Thanks. You may wish to check the md5sum if you can find it as that's what usually causes me to get unexpected end of file errors. If your browser has the file cached then using a download manager or another browser will get around that. Where did you find the rom? I can check if it gives me the same errors on Linux. System and Boot would be the two most important but I wouldn't expect it to run when it error's at 52% on system.
famewolf said:
All useful info. Thanks. You may wish to check the md5sum if you can find it as that's what usually causes me to get unexpected end of file errors. If your browser has the file cached then using a download manager or another browser will get around that. Where did you find the rom? I can check if it gives me the same errors on Linux. System and Boot would be the two most important but I wouldn't expect it to run when it error's at 52% on system.
Click to expand...
Click to collapse
It runs pretty stockish,so no extra features. And all i can check run normal (wifi,bt, 4G LTE, calling, messaging).
I made TWRP backup of SYSTEM and Boot.
DallasCZ said:
It runs pretty stockish,so no extra features. And all i can check run normal (wifi,bt, 4G LTE, calling, messaging).
I made TWRP backup of SYSTEM and Boot.
Click to expand...
Click to collapse
I'm asking for the third time for you to please tell us where you found the rom. As an alternative an upload of the FULL original rom would also be fine. I would like to get full copies of system and boot that don't have errors even if it appears to be working for you.
famewolf said:
I'm asking for the third time for you to please tell us where you found the rom. As an alternative an upload of the FULL original rom would also be fine. I would like to get full copies of system and boot that don't have errors even if it appears to be working for you.
Click to expand...
Click to collapse
Sorry i didnt see that you are asking for it is for second time as i can count.
And it is really so hard to try google "panasonic eluga switch"?
http://firmwarefile.com/panasonic-eluga-switch
DallasCZ said:
Sorry i didnt see that you are asking for it is for second time as i can count.
And it is really so hard to try google "panasonic eluga switch"?
http://firmwarefile.com/panasonic-eluga-switch
Click to expand...
Click to collapse
Thank you. Requests for the rom were in posts 3, 6 and 8.
I did do a search however all I found were reviews on the device. I did have "4g" in my search string as well though.
I'll see how it extracts for me.
i downloaded it twice, extracted circa 10 times. All appear to be good ,but in the flash process it give error and also i cant extract the system.img file. But boot.img i extracted without problems. will post my md5sum in a while in this post.
"EB-90S55EWLv1009.exe" MD5: AD0CA1465758D82782BBF6734AEB3CA3
"Engineering Software Download Tool QCT_SP.exe" MD5: 6553E63778BE4B8844DB7021C633F33E
this "Engineering Software Download Tool QCT_SP.exe" can be opened by 7zip and contains all partitions img files
DallasCZ said:
i downloaded it twice, extracted circa 10 times. All appear to be good ,but in the flash process it give error and also i cant extract the system.img file. But boot.img i extracted without problems. will post my md5sum in a while in this post.
"EB-90S55EWLv1009.exe" MD5: AD0CA1465758D82782BBF6734AEB3CA3
"Engineering Software Download Tool QCT_SP.exe" MD5: 6553E63778BE4B8844DB7021C633F33E
this "Engineering Software Download Tool QCT_SP.exe" can be opened by 7zip and contains all partitions img files
Click to expand...
Click to collapse
hi the rom works with our Idol 3???ans if works can you make backup to install it
i wrote,that it works....it is rebranded idol 3 5.5 even in build.prop its codenamed 6045
DallasCZ said:
i wrote,that it works....it is rebranded idol 3 5.5 even in build.prop its codenamed 6045
Click to expand...
Click to collapse
can you make backup to install?because i cant download from the page because my pc is dead?
Sent from my 6045I using Tapatalk
DallasCZ said:
It runs pretty stockish,so no extra features. And all i can check run normal (wifi,bt, 4G LTE, calling, messaging).
I made TWRP backup of SYSTEM and Boot.
Click to expand...
Click to collapse
By "stockish" do you mean it has the lag like ours did or it's fast like the i806 rom?
FYI the linux p7zip extractor can't undo the .exe file...I'll pull it up into 7zip on my windows machine.
famewolf said:
By "stockish" do you mean it has the lag like ours did or it's fast like the i806 rom?
FYI the linux p7zip extractor can't undo the .exe file...I'll pull it up into 7zip on my windows machine.
Click to expand...
Click to collapse
Maybe the percentage fail within the upgrade app is just an bug, because all works so far well.. I made a build with arde OC kernel, just for testing purposes. I tried to flash it several time, login into google, tried googple play store, wifi, calling, sms..all seems to work.
i played with it for about 4 hours and it feels like sthe original stock rom(yes with the lags..i think. Its hard to compare for me becaus ei havent touched stock idol3 since 6 months )..i have found no extras in the firmware.
And i also uploaded the panasonic kernel to my google drive kernel folder.
marshmalow
http://www.marshmallowupdate.xyz/tag/panasonic-eluga-switch-marshmallow-rom-download
i cant download or its not downloadable :/
here is another one
http://www.gsmarena.com/yu_yureka-6987.php
source
https://github.com/YUPlayGod/android_kernel_yu_msm8916
https://github.com/CyanogenMod/android_device_yu_tomato
https://github.com/YU-YUREKA/android_kernel_yu_msm8916
nero curin said:
http://www.marshmallowupdate.xyz/tag/panasonic-eluga-switch-marshmallow-rom-download
i cant download or its not downloadable :/
Click to expand...
Click to collapse
I'll save you some grief. That's a scam to get you to do one of the tasks. Rom size of 596mb? I don't think so.
famewolf said:
I'll save you some grief. That's a scam to get you to do one of the tasks. Rom size of 596mb? I don't think so.
Click to expand...
Click to collapse
that was my tought lol
OTA ROM 5.0.2 Alcatel one touch idol 3 4.7 6039Y EU
Hello!
Where can I find the ΟΤΑ ROM 5.0.2 for the Alcatel one touch idol 3 4.7'', 8gb, 6039Y EUROPE?
I have the Greek language.
Thanks!
Related
For All Friends Here is Another Original ROM for Samsung I9100 Galaxy S II:
I9100XEKDB
Online Flash Guide
Files insdie this package:
u1_02_20110310_emmc_EXT4.pit
MODEM_I9100XXKDH_REV_02_CL995882.tar.md5
KERNEL_I9100XEKDB_CL161513_REV02_user_low_ship.tar.md5
CODE_I9100XEKDB_CL161513_REV02_user_low_ship.tar.md5
GT-I9100-MULTI-CSC-OXEKD9.tar.md5
GT-I9100_Release_Note_OXE.xls
GT-I9100_PDA_ReleaseNote_I9100XEKDB.xls
GT-I9100 Modem Release Note_KDH.xlsx
Share If U Care
Russian firmware?
Thanks, even though I have quite a number of firmwares already, it looks like the kernel from this firmware is the piece of the puzzle I was missing to make a proper kernel hack (like CF-Root). Let's hope I'm right!
Cheers!
Intratech said:
Russian firmware?
Click to expand...
Click to collapse
Looks like it, and here's an interesting note from the changelog for the system/PDA image:
" Release for CIS. ( Base : XWKDD, same CL),
different : Remove Readers Hub, Music Hub, Social Hub (premium -> Basic)"
Coming from HTC phones, I don't understand why ODIN or KIES are still used. It really looks like something from the past... Can't we just flash update.zip files through recovery like normal android phones or in the worst case, flash .zip files through hboot?
I really hope that Paul or someone else will port CWR to this phone. *fingers crossed*
I personally really like Odin
Much prefer it to copying the zip file onto the phone, and then booting into recovery
Intratech said:
Russian firmware?
Click to expand...
Click to collapse
CSC - for russian.. PDA - almost full analog XWKDD
venezia64 said:
Coming from HTC phones, I don't understand why ODIN or KIES are still used. It really looks like something from the past... Can't we just flash update.zip files through recovery like normal android phones or in the worst case, flash .zip files through hboot?
I really hope that Paul or someone else will port CWR to this phone. *fingers crossed*
Click to expand...
Click to collapse
The Galaxy series can also flash update.zip like any other Android device, but the zips require signing by Samsung to be flashable by default. So recovery has to modded first, and to do that you need to flash a custom kernel, and to do that, you need ODIN.
Besides, though I like update.zips for small patches, why people prefer them for full firmwares is still beyond me. ODIN is much faster method for flashing than first having to copy to SD card, then flash.
As for KIES, KIES automatically downloads and flashes the latest official firmware for you (using the same protocol that ODIN uses). I don't like KIES at all, but for the "normal" non-XDA-type-person-user it's great.
Also keep in mind that ODIN is an engineering tool... it was never meant to end up in consumer hands.
Pako7 said:
CSC - for russian.. PDA - almost full analog XWKDD
Click to expand...
Click to collapse
no, from PDA delete samsung *hub app
fguy said:
no, from PDA delete samsung *hub app
Click to expand...
Click to collapse
íó ÿ æå ñêàçàë - "almost".. ïî÷òè
Probably *hubs are not completely release_soft that them to establish in all firmwares
so does this mean Russia is not getting Samsung Hubs?? Then how come Eldar's phone had them? just because it was a review phone?
Edit: I think i just answered my question!
Chainfire said:
Besides, though I like update.zips for small patches, why people prefer them for full firmwares is still beyond me. ODIN is much faster method for flashing than first having to copy to SD card, then flash.
Click to expand...
Click to collapse
On my Desire it's faster for me because I download ROMs direct to the SD card in my phone over WiFi. No copying, no PC, no messing about required. I just tell ROM Manager where the ROM is and job done.
sorry, deleted
Chainfire said:
Besides, though I like update.zips for small patches, why people prefer them for full firmwares is still beyond me. ODIN is much faster method for flashing than first having to copy to SD card, then flash.
Click to expand...
Click to collapse
Its really easy to put together CWM zip files when developing a ROM. You're most likely in adb pushing and pulling files anyway.. another zip (when developing) is nothing.
CWM also allows you the flexibility to flash without wiping specific partitions.
As stated earlier, you also need a PC to use Odin. A PC running Windows. Some people have Macs, and it is definitely useful when you don't have a PC in front of you, but you can still download a ROM, back up your current data, wipe your phone and flash a completely different ROM - and back - all without a PC, USB cable, Windows, drivers, and the phone button in Odin.
Sent from my SCH-I500 using XDA App
Quit trolling now!
DeezNotes said:
... Some people have Macs..
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
There is a 'Port' of Odin to OS X - called as - "Heimdall". Probably it will get updated to support SGS2.
What is KERNEL_I9100XEKDB_CL161513_REV02_user_low_ship.tar.md5 used for? where do I put it in Odin..?
u1_02_20110310_emmc_EXT4.pit Pit
MODEM_I9100XXKDH_REV_02_CL995882.tar.md5 = Phone
KERNEL_I9100XEKDB_CL161513_REV02_user_low_ship.tar.md5= ????
CODE_I9100XEKDB_CL161513_REV02_user_low_ship.tar.md5 = PDA
GT-I9100-MULTI-CSC-OXEKD9.tar.md5= CSC
tsarkh said:
For All Friends Here is Another Original ROM for Samsung I9100 Galaxy S II:
I9100XEKDB
Online Flash Guide
Files insdie this package:
u1_02_20110310_emmc_EXT4.pit Pit
MODEM_I9100XXKDH_REV_02_CL995882.tar.md5 = Phone
KERNEL_I9100XEKDB_CL161513_REV02_user_low_ship.tar.md5
CODE_I9100XEKDB_CL161513_REV02_user_low_ship.tar.md5 = PDA
GT-I9100-MULTI-CSC-OXEKD9.tar.md5= CSC
GT-I9100_Release_Note_OXE.xls
GT-I9100_PDA_ReleaseNote_I9100XEKDB.xls
GT-I9100 Modem Release Note_KDH.xlsx
Share If U Care
Click to expand...
Click to collapse
nasgilani said:
What is KERNEL_I9100XEKDB_CL161513_REV02_user_low_ship.tar.md5 used for? where do I put it in Odin..?
u1_02_20110310_emmc_EXT4.pit Pit
MODEM_I9100XXKDH_REV_02_CL995882.tar.md5 = Phone
KERNEL_I9100XEKDB_CL161513_REV02_user_low_ship.tar.md5= ????
CODE_I9100XEKDB_CL161513_REV02_user_low_ship.tar.md5 = PDA
GT-I9100-MULTI-CSC-OXEKD9.tar.md5= CSC
Click to expand...
Click to collapse
Correction. The tar.md5 file is an ODIN tar file, but with built-in MD5 checksum to verify it before flashing.
Thanks Puler_g2.. for hint, got I9100XEKE1 installed and rooted
pulser_g2 said:
The .md5 file isn't to be put in ODIN, but the file should be used by ODIN silently to verify that the file "KERNEL_I9100XEKDB_CL161513_REV02_user_low_ship.tar" isn't corrupted.
Click to expand...
Click to collapse
Is there any way to explore the ROM? I tried winrar, but then I got stuck on the .img files because they wouldn't open with either undisker/magic iso or daemon tools...
I need to find 2 .odex files to copy to my system/app folder on my SGS2 because I screwed it up using Titanium Backup and uninstalled a system app...
anyway, how to make this from a rom into a system dump?
i tried using unyaffs.exe with cygwin1.dll to unpack factoryfs.img it failed with this message
Exception: STATUS_ACCESS_VIOLATION at eip=004010B0
eax=5622D904 ebx=0000000E ecx=FFFFFFF0 edx=00EF12A2 esi=611021A0 edi=00401788
ebp=0028CC58 esp=0028CC20 program=D:\Downloads\unyaffs-x86-win\unyaffs.exe, pid 5160, thread main
cs=0023 ds=002B es=002B fs=0053 gs=002B ss=002B
Stack trace:
Frame Function Args
0028CC58 004010B0 (0028CCB9, 00000000, 0040130E, 00401333)
0028CC88 004013AF (00000002, 00EF1268, 00EF0090, 610BEE77)
0028CD68 610060D8 (00000000, 0028CDA0, 61005450, 0028CDA0)
61005450 61004416 (0000009C, A02404C7, E8611021, FFFFFF48)
308330 [main] unyaffs 5160 _cygtls::handle_exceptions: Exception: STATUS_ACCESS_VIOLATION
323223 [main] unyaffs 5160 _cygtls::handle_exceptions: Error while dumping state (probably corrupted stack)
So again, how do I get the .apk/.odex I need from a ROM?
I built a couple of CWM Recovery Nandroid backups for all the folks looking for a stock restore image that is pre-rooted and devoid of bloatware.
Built on: 1838CTO 32GB US Thinkpad Tablet with Gobi 3000 WWAN. No internet connection made during boot. No account information entered. Superuser pre-activated.
You should update to the latest CWM Recovery port, i.e. VENTANA RECOVERY from http://everyrandom.com/files/files.php
BACK-UP YOUR OWN THINKPAD FIRST USING CWR
- and report your experiences afterwards!
UNZIP the folder to /clockworkmod/backup/ on EXTERNAL SD-CARD
Use CWR after a full power down, choose backup/restore, choose restore, choose the backup folder
There are TWO options currently:
NO BLOATWARE 0089 / OTA2.5 -- 350MB zip
No-Bloat 0089/OTA2.5 US Rooted Nandroid - NEW LINK
NO BLOATWARE 0075 / OTA1 -- 330MB zip
NO Bloat 0075 US Rooted Nandroid ZIPPED
pwstein said:
I built a couple of CWR Nandroid backups for all the folks looking for a stock restore image that is pre-rooted.
Useful for users wanting to roll back to an earlier firmware (0075) on US supported Thinkpads with CWR installed.
Built on: 1838CTO 32GB US Thinkpad Tablet with Gobi 3000 WWAN. No internet connection made during boot. No account information entered. Superuser pre-activated.
PLEASE -
UPDATE TO THE LATEST CWR port
BACK-UP YOUR OWN THINKPAD FIRST USING CWR
- and report your experiences afterwards!
IT IS ZIPPED - UNZIP and move to EXTERNAL SD-CARD
The SD_CARD should have:
/clockworkmod/backup/no_bloat_0075_US_root_NANDROID/**files**
Use CWR after a full power down, choose backup/restore, choose restore, choose the unzipped backup
YES BLOATWARE -- I allowed the Lenovo Add-on apps to install - 550MB, i.e. stock, factory fresh US build
YES Bloat 0075 US Rooted Nandroid ZIPPED
Click to expand...
Click to collapse
Thanks for doing this!
I kept having trouble with downloading the files.
After entering the security code & clicking on Dowload File, it will automatically refresh the page & bring me back to the beginning again.
I tried both on Firefox & IE.
Which CWR are you referring to?
I can't locate the new port in the original CWM thread...I'm using the one posted in the first post of that thread.
Konker
konker said:
Thanks for doing this!
I kept having trouble with downloading the files.
After entering the security code & clicking on Dowload File, it will automatically refresh the page & bring me back to the beginning again.
I tried both on Firefox & IE.
Which CWR are you referring to?
I can't locate the new port in the original CWM thread...I'm using the one posted in the first post of that thread.
Konker
Click to expand...
Click to collapse
I don't know why the site isn't working for downloading, seems like lots of folks have been successful. I ran in to the same issue trying to test the download. Any ideas from the forum?
CWR/CWM Recovery -- It is called ventana_recovery and can be found in US or ROW types in 16, 32 and 64 iterations at everyrandom.
http://everyrandom.com/files/files.php
New link for the No Bloatware Nandroid added to original post. When I can get the other Nandroid uploaded to the new server, I'll add that link.
Don't know why the other links wouldn't serve up... sorry all.
pwstein said:
I don't know why the site isn't working for downloading, seems like lots of folks have been successful. I ran in to the same issue trying to test the download. Any ideas from the forum?
CWR/CWM Recovery -- It is called ventana_recovery and can be found in US or ROW types in 16, 32 and 64 iterations at everyrandom.
http://everyrandom.com/files/files.php
Click to expand...
Click to collapse
Is this the one I should be using for my 32Gb TPT?
It's labelled ventana32_recovery.img.
I don't know what happened but yesterday, I couldn't even browse the Files folder to view other files.
Thanks for reposting the Nandroid backups!
Yes, you've located the right one if you've got a US tablet.
The gps.conf is modified from the original file that shipped on tablet. This causes updates to fail.
CWM will cause OTA2 to fail during update. My apologies about GPS.conf, I missed that. It is a simple thing to fix.
Also, there are OTA builds that don't require the original files and recovery here in XDA.
I downloaded the 0075_US file. I am looking to replace a couple of system/app files (mainly PinyinIME.apk) as I deleted them before without a backup.
I want to take my TPT back to stock or run some sort of update without too much trouble as I plan on selling my TPT (need the money).
Is there a way that I can extract the files that I need from the 0075_US files that was posted here?
Thanks
There is a system dump provided by GodfatherIP at another forum, here is a link http://dl.dropbox.com/u/6846397/System.zip
Maybe that'll help...
hey guys!
i was looking for such a non bloated rom - yet, im not sure on how to exactly install cwm ... call me stupid, but i can't really find a step by step guide and rom manager wasnt working for me. could someone link me (obviously too stupid for the search function) a thread or give a guideline?
thanks in advance, also for the rom!
hansonenator said:
I downloaded the 0075_US file. I am looking to replace a couple of system/app files (mainly PinyinIME.apk) as I deleted them before without a backup.
I want to take my TPT back to stock or run some sort of update without too much trouble as I plan on selling my TPT (need the money).
Is there a way that I can extract the files that I need from the 0075_US files that was posted here?
Thanks
Click to expand...
Click to collapse
Download the archive and open it with winrar. You will find system.ext4.tar. Open it inside winrar and it will extract it. In the app directory you will find all system apps.
Copy PinyinIME.apk and the odex to your device /system/app and do :
chmod 644 /system/app/PinyinIME.*
pau-pau123 said:
hey guys!
i was looking for such a non bloated rom - yet, im not sure on how to exactly install cwm ... call me stupid, but i can't really find a step by step guide and rom manager wasnt working for me. could someone link me (obviously too stupid for the search function) a thread or give a guideline?
thanks in advance, also for the rom!
Click to expand...
Click to collapse
noone can help me here?
my post to Temetka might help you
pwstein said:
my post to Temetka might help you
Click to expand...
Click to collapse
thanks, worked fine after some more research
http://dl.dropbox.com/u/10649086/0089_US_no-bloat_rooted.zip
is the link down just for me?
//jk, worked
MD5 checksum mismatch?
pwstein said:
I built a couple of CWM Recovery Nandroid backups for all the folks looking for a stock restore image that is pre-rooted and devoid of bloatware.
Built on: 1838CTO 32GB US Thinkpad Tablet with Gobi 3000 WWAN. No internet connection made during boot. No account information entered. Superuser pre-activated.
You should update to the latest CWM Recovery port, i.e. VENTANA RECOVERY from http://everyrandom.com/files/files.php
BACK-UP YOUR OWN THINKPAD FIRST USING CWR
- and report your experiences afterwards!
UNZIP the folder to /clockworkmod/backup/ on EXTERNAL SD-CARD
Use CWR after a full power down, choose backup/restore, choose restore, choose the backup folder
There are TWO options currently:
NO BLOATWARE 0089 / OTA2.5 -- 350MB zip
No-Bloat 0089/OTA2.5 US Rooted Nandroid - NEW LINK
NO BLOATWARE 0075 / OTA1 -- 330MB zip
NO Bloat 0075 US Rooted Nandroid ZIPPED
Click to expand...
Click to collapse
pwstein,
Finally got down to restoring your Nandroid backup to my TPT.
However, I kept getting the MD5 checksum mismatch error.
Am downloading again to try and see if it makes any difference.
Do I need to preserve the folder name 0089_US_no-bloat_rooted?
Konker
konker said:
pwstein,
Finally got down to restoring your Nandroid backup to my TPT.
However, I kept getting the MD5 checksum mismatch error.
Am downloading again to try and see if it makes any difference.
Do I need to preserve the folder name 0089_US_no-bloat_rooted?
Konker
Click to expand...
Click to collapse
Reloaded the 0089 package but ended up with the same MD5 mismatch error.
Tried this method to recreate the nandroid.md5 but my TPT does not have md5sum even though busybox is already installed.
Anyone has a clue what I can do to overcome this?
Konker
Off the top of my head, and I apologize if you have made this apparent elsewhere, are you using a US (or UK) firmware Tablet?
pwstein said:
Off the top of my head, and I apologize if you have made this apparent elsewhere, are you using a US (or UK) firmware Tablet?
Click to expand...
Click to collapse
I'm using a US TPT.
Do you think the CWR versions we're using matters?
I've since upgraded the CWR to the version you recommended & so I'm wondering if this is a factor.
Konker
I don't know about the different CWM Recovery. I wish I did.
After you have extracted the zip, the folder can be renamed but it should be placed within the backup folder, like:
EXTERNAL SD-CARD ROOT/clockworkmod/backup/0089_US_no-bloat_rooted/**files**
Ok.... I've seen a lot of users in many forums that want change the radio...
See HERE!!!! For european with Argentinian radio!!!
http://forum.xda-developers.com/showpost.php?p=27649093&postcount=25
I've changed the radio on droid pro... (american)
But I didn't remember how!!
Edit...
Yes I know....! With rsdlite... Ok rsdlite can rewrite the radio. Sbf_flash no...
The American users know this thing, but for European it is a good news, because they can flash an american/argentinian sbf without changing radio.... Naturally with sbf_flash...
Flashing american on european with rsdlite will brick your phone, without changing the radio...
European on American with rsdlite will brick your phone, without changing your radio...
But if you'll use sbf flash, your phone will be glad!
You must see only if you have a locked kernel... (argentinian 2.3.6 I'm sure... for american 2.3.4, I don't know...)
Attention!!!
Argentinian gsm is 800/2100
European gsm is 900/1200
So we can understand the european's issues with argentinian rom....
I'm always sure that we must search the radio in the sbf! Not files...
I've done some steps here, only for trying...
1) Put your phone in bootloader mode
2) Start with Linux Knoppix live cd
3) Open terminal emulator from your folder where you have your sbf (i've used 2.26.20 verizon SBF..))
4) put also sbf_flash in the same folder ( you can find here:http://blog.opticaldelusion.org/search/label/sbf_flash )
chmod +x sbf_flash
then
sudo ./sbf_flash -r --bpsw 2260.sbf
Connect your phone...
Reboot and now you'll have a new radio!
See HERE!!!! For european with Argentinian radio!!!
http://forum.xda-developers.com/showpost.php?p=27649093&postcount=25
Sent from My Motosola....
Ok... Only for testing... I've saved on my dropbox folder a euril.zip, extract lib_moto.ril and replace with yours in system/lib (rename before yours)... Before set your pin sim card... with a new one!
Set permission to rw-r-r... Reboot...
Try...
If you have any issue set airplane mode on, reboot and replace it with yours renamed, reboot again...
Sent from My Motosola....
dettofatto,
Replacing the files did not help.
USSD does not work.
It may have something else to fix?
motostigr said:
dettofatto,
Replacing the files did not help.
USSD does not work.
It may have something else to fix?
Click to expand...
Click to collapse
No.. I'm thinking...
For Your issue on gsm, try to install this file with clockwordmod, make backup before...
http://www.grupoandroid.com/topic/45732-3g-hack-para-xt610/page__pid__667515#entry667515
All Credits to: http://www.grupoandroid.com/topic/45732-3g-hack-para-xt610/page__pid__667515#entry667515
Just tried the hack. Unfortunately I don't notice any progress.
In fact the extracted files are missing after reboot (no bp_nvm_default folder). I searched for them earlier in order to use basebandswitcher but never found them.
Maybe the whole telephony module really is emulated in java (see /system/etc/init.goldfish.sh)? But what would it mean for us?
I also tried 3 other ways yesterday without success:
- tried to flash bp.img from Blur_Version.4.7.3XT610.Verizon.en.US.zip --> status 7 error in CWM
- flash a zip containing radio.img of a european Pro+ update --> installs too fast without any noticable difference. Looks like he is ignoring the radio
- flashed JackpotCalvin's ICS rom which also includes bootmenu with a 2nd boot config only containing init.mapphone_umts.rc --> I may have done something wrong during the process but coulnd't see any difference
@any user of the US-verizon model: can you choose between more than "USA Band" when you do the following?
- dial *#*#4636#*#*
- go to "Phone Information"
- press menu softkey
- select radio band
@anyone with original european froyo: what choices do you have?
Ive seen different models (including Pro+) which always let me choose between 5-6 different basebands.
hlat said:
Just tried the hack. Unfortunately I don't notice any progress.
In fact the extracted files are missing after reboot (no bp_nvm_default folder). I searched for them earlier in order to use basebandswitcher but never found them.
Maybe the whole telephony module really is emulated in java (see /system/etc/init.goldfish.sh)? But what would it mean for us?
I also tried 3 other ways yesterday without success:
- tried to flash bp.img from Blur_Version.4.7.3XT610.Verizon.en.US.zip --> status 7 error in CWM
- flash a zip containing radio.img of a european Pro+ update --> installs too fast without any noticable difference. Looks like he is ignoring the radio
- flashed JackpotCalvin's ICS rom which also includes bootmenu with a 2nd boot config only containing init.mapphone_umts.rc --> I may have done something wrong during the process but coulnd't see any difference
@any user of the US-verizon model: can you choose between more than "USA Band" when you do the following?
- dial *#*#4636#*#*
- go to "Phone Information"
- press menu softkey
- select radio band
Ive seen different models (including Pro+) which always let me choose between 5-6 different basebands.
Click to expand...
Click to collapse
In all pro we can choose only usa band (also in european froyo...)
Try to move manually the folder bp_nvm
Or Try this...
Install a nandroid backup of original american 2.3.3 (very original!!)
then try to recive the update from verizon and install it
Will I need to pull battery for 3 hours if I do the verizon update?
Boh....!!!! But I've seen your pm! Did you phone restart?
In my experience my phone restart in about 3 ours... coming from froyo...
But coming from 2.3.6?
Sent from My Motosola....
I don't know if this will help you or not, but I have the VZW 4.7.3 SBF file now. I just got it from a friend who pulled it from Motorola's server.
I have not tested it yet and have no need to as my Pro is already on 4.7.3 and rooted and is an engineering model anyway.
I will upload it somewhere to post publicly tonight or tomorrow when I get the chance.
cellzealot said:
I don't know if this will help you or not, but I have the VZW 4.7.3 SBF file now. I just got it from a friend who pulled it from Motorola's server.
I have not tested it yet and have no need to as my Pro is already on 4.7.3 and rooted and is an engineering model anyway.
I will upload it somewhere to post publicly tonight or tomorrow when I get the chance.
Click to expand...
Click to collapse
do you have any files bp-nvm or similar?
we are searching the radio file...
Thank you!
dettofatto said:
For Your issue on gsm, try to install this file with clockwordmod, make backup before...
http://www.grupoandroid.com/topic/45732-3g-hack-para-xt610/page__pid__667515#entry667515
All Credits to: http://www.grupoandroid.com/topic/45732-3g-hack-para-xt610/page__pid__667515#entry667515
Click to expand...
Click to collapse
I may have good news everyone!
After I have some issues with the 3g hack (files not showing up after reboot), I unzipped them manually. Then I changed permissions to rw-r--r-- and installed Defy+ baseband switcher to changed baseband to European (900/2100).
Since I've been mainly in areas with good signal quality the last week, I'm not a 100% sure if it really improved anything. But it feels like it!
Can someone please try this workaround for verification? The needed files are attached.
Thanks!
the right steps are?
1) Extract your I and II zips file in our pc
2) copy folder bp_nvm_default (II zip) from our pc to our phone under system/etc/motorola
3) set permissions
4) copy basebandswitcher (I Zip) from your II zip to /system/app, set permission to rw-r-r
5) Reboot
6) Open the new app
7) Or use my rom....! ;-)
it is right?
Thats right! Thank you for completing
Sent from my XT610 using XDA
dettofatto said:
the right steps are?
copy folder bp_nvm_default under system/etc/motorola
set permissions
install apk
it is right?
Click to expand...
Click to collapse
Hi
where can I find folder bp_nvm_default so that I can try..?
Thanks
sorry found. a question: are the files installed by CWN ..?
In the hlat's files...
you must open these zips files and add manually in your phone...
with root explorer..
dettofatto said:
In the hlat's files...
you must open these zips files and add manually in your phone...
with root explorer..
Click to expand...
Click to collapse
ok
then:
unzip 3ghack and copy the folder bp_nvm_default under system / etc / motorola.
After I install the file basebandswitcherV4.0.apk.
files that are present in the meta-inf folder what do I do..?
billamele said:
ok
then:
unzip 3ghack and copy the folder bp_nvm_default under system / etc / motorola.
After I install the file basebandswitcherV4.0.apk.
files that are present in the meta-inf folder what do I do..?
Click to expand...
Click to collapse
Nothing.....
Try also this zip file: http://dl.dropbox.com/u/33827639/Droid Pro/Ril & Init/noncancellatmp.zip
install this file 2 times in the same session with clockwordmod....
i think that your radio will change...
Make your backup first!! And use new bootmenu!!
New steps for extracting radio....
See the first post...
How do i get the lenovo 1050F lollipop update because my tablet says there is no update but i have 4.4.2
parsnep said:
How do i get the lenovo 1050F lollipop update because my tablet says there is no update but i have 4.4.2
Click to expand...
Click to collapse
Hi,
Here is the android 5.0 OTA update file
http://hugefiles.net/d216kt2qlaom
Version YT2-1050F-USR_S000198_150422 to YT2-1050F-USR_S100031_150611
Download it, copy it to the tablet. Go to the system updates menu, select the button in the top right corner. Should see some options, choose the one to update from a file on SDCARD. Select the update.zip file.
ixa20 said:
Hi,
Here is the android 5.0 OTA update file
http://hugefiles.net/d216kt2qlaom
Version YT2-1050F-USR_S000198_150422 to YT2-1050F-USR_S100031_150611
Download it, copy it to the tablet. Go to the system updates menu, select the button in the top right corner. Should see some options, choose the one to update from a file on SDCARD. Select the update.zip file.
Click to expand...
Click to collapse
Nice spam/maleware site.... Thanks. NOT!
workdowg said:
Nice spam/maleware site.... Thanks. NOT!
Click to expand...
Click to collapse
Dude have you even tried the link? it's a filehosting site, uploaded the file myself. On the download page untick "Download using download accelerator", you'll get the file direct.
ixa20 said:
Dude have you even tried the link? it's a filehosting site, uploaded the file myself. On the download page untick "Download using download accelerator", you'll get the file direct.
Click to expand...
Click to collapse
Sorry, I'm just not used to having popups all over the place... And funny it says my Windows PC is infected click here to fix... hmmm.... Interesting...I run Linux....
Please try using a real/reputable site to host your files, like Android File Host. They are free and very professional.
Thank you.
workdowg said:
Sorry, I'm just not used to having popups all over the place... And funny it says my Windows PC is infected click here to fix... hmmm.... Interesting...I run Linux....
Please try using a real/reputable site to host your files, like Android File Host. They are free and very professional.
Thank you.
Click to expand...
Click to collapse
Fair enough, didn't know they were there since I use an adblocker. I'll try that site out next time, not used it before.
anyone has link to lollipop 830F before Lenovo pulled the update?
sdho said:
anyone has link to lollipop 830F before Lenovo pulled the update?
Click to expand...
Click to collapse
I'd like the 1050F if possible also. ?
Sent from my YOGA Tablet 2-1050F using Tapatalk
This is the same file but on mediafire: http://www.mediafire.com/download/vqvybiyyfhvt24c/update.zip
veimus said:
This is the same file but on mediafire: http://www.mediafire.com/download/vqvybiyyfhvt24c/update.zip
Click to expand...
Click to collapse
Got it. Now to find out what can be done. Too bad my vacation is over today... Off to work in 2 hours.
Just downloaded the file and put on my tablet. No way to update via fastboot.
Tried to download original stock from and flash from fastphone. OK then put easyimage both on sd and internal memory as well. Changed int code to de. Tried to update again to lollipop but still install fail at first 98%.
Then tried to setup again stock fw, wipe cache/memory, set it code to de and flash again lollipop. Install fail again at 98%.
Really don't know what to do now. Could you help me?
F0ll3 said:
Just downloaded the file and put on my tablet. No way to update via fastboot.
Tried to download original stock from and flash from fastphone. OK then put easyimage both on sd and internal memory as well. Changed int code to de. Tried to update again to lollipop but still install fail at first 98%.
Then tried to setup again stock fw, wipe cache/memory, set it code to de and flash again lollipop. Install fail again at 98%.
Really don't know what to do now. Could you help me?
Click to expand...
Click to collapse
Could be a corrupt zip. Bad thing is we don't have a checksum file for it, so no way to double check it. ?
And I still haven't had a chance to look it over yet...
From my LG-G3 running Jasmine7.0/SkyDragon kernel 4.1
I've updated twice through the update.zip, i've just checked the hashes and they should be
MD5: 7D8504AB9CB1A114BE8705CBADECC296
SHA-1: 0B843D584F39801AA4B7E18A4870A0EEC8E07BA7
If your hash is different try re-downloading, otherwise it's possible my upload was corrupt or the mediafire mirror someone created.
ixa20 said:
I've updated twice through the update.zip, i've just checked the hashes and they should be
MD5: 7D8504AB9CB1A114BE8705CBADECC296
SHA-1: 0B843D584F39801AA4B7E18A4870A0EEC8E07BA7
If your hash is different try re-downloading, otherwise it's possible my upload was corrupt or the mediafire mirror someone created.
Click to expand...
Click to collapse
I was hoping you'd chime in.
Sent from my YOGA Tablet 2-1050F using Tapatalk
Hey everyone,
I'm trying to comply update to my device using the B32 firmware downloaded on ZTE USA Support site. The file is large, too large for FAT32, at 5.39GB.
I have tried copying it using android transfer on my mac, ejecting the microSD and using a regular SD adapter and copying it that way, and I have also tried just downloading right from the Software Update screen. The first two methods errored with (https://ibb.co/kjh4yG).
The software update fails with a message explaining that the firmware found and downloaded by the phone does not match the device...?
I have been on the old firmware for what feels like a year now. I'm hoping you all can shed some light on this.
Thanks
macboss said:
Hey everyone,
I'm trying to comply update to my device using the B32 firmware downloaded on ZTE USA Support site. The file is large, too large for FAT32, at 5.39GB.
I have tried copying it using android transfer on my mac, ejecting the microSD and using a regular SD adapter and copying it that way, and I have also tried just downloading right from the Software Update screen. The first two methods errored with (https://ibb.co/kjh4yG).
The software update fails with a message explaining that the firmware found and downloaded by the phone does not match the device...?
I have been on the old firmware for what feels like a year now. I'm hoping you all can shed some light on this.
Thanks
Click to expand...
Click to collapse
You have two ways to do this:
-If your internet is decent enough just forget about the SD card and download the update on your phone. Afterwards, download 'RAR' from the play store, find the downloaded file (in Downloads), and open the zip file. If you find a PDF and a file called 'update.zip' inside, simply select it and unzip it to the root of your sd card (put '/storage/emulated/0/ on the Destination path). So you will have an 'update.zip' file there. You don't need to unzip this one. Now go to Settings, Updates, then let it scan and it should find the file, update and voila
-Format your SD Card to exfat and pop the file right in
It's weird that the update file is that huge, since usually files for the A2017G are around 2.1 gigs
It worked my friend!!!
I installed RAR, then went inside the downloaded file, found update.zip and unzipped it to '/storage/emulated/0. Did not find any PDF file though, not sure what that would have been for..? Anyway, saw the MiFavor firmware update screen which meant we were on our way to finish line. After that it booted to a small tiny linux penguin symbol and black background. Tried rebooting by holding down the power button. Rebooted. Saw penguin again for like 5 seconds, then booted straight to the axon wavy weird startup sequence. I DID IT!! I really appreciate the help on this one. Great idea. And it worked flawlessly.
Thank you. Choose an username.. Your username might be strange but your solutions are a lifesaver.
Cheers!
macboss said:
It worked my friend!!!
I installed RAR, then went inside the downloaded file, found update.zip and unzipped it to '/storage/emulated/0. Did not find any PDF file though, not sure what that would have been for..? Anyway, saw the MiFavor firmware update screen which meant we were on our way to finish line. After that it booted to a small tiny linux penguin symbol and black background. Tried rebooting by holding down the power button. Rebooted. Saw penguin again for like 5 seconds, then booted straight to the axon wavy weird startup sequence. I DID IT!! I really appreciate the help on this one. Great idea. And it worked flawlessly.
Thank you. Choose an username.. Your username might be strange but your solutions are a lifesaver.
Cheers!
Click to expand...
Click to collapse
Lol. The signup dialog said 'Choose an username...', so i said, why not?
I think you downloaded directly the update.zip. Maybe the RAR part wasn't needed, I dunno. If there's a folder somewhere there called 'update' then just delete it, and the update.zip too
A larger than 5Gb update would have to be the file fully unzipped into a folder structure.
Update files are zipped and that's what the phone wants.
Choose an username... said:
Lol. The signup dialog said 'Choose an username...', so i said, why not?
I think you downloaded directly the update.zip. Maybe the RAR part wasn't needed, I dunno. If there's a folder somewhere there called 'update' then just delete it, and the update.zip too
Click to expand...
Click to collapse
I downloaded one of the two raw zips from the ZTE USA site that had a very long name.zip with all numbers. The "update.zip" was nestled inside after unzipping the file on the phone. I just picked that file and moved it to ther root and applied the update. It went through successfully. Did i not apply it correctly? Should i have just renamed that whole file to "update.zip" and moved the entire folder? A little confused. But i imagine if the update took and i saw the 32 in the current build of the device it took. But im not sure.
macboss said:
I downloaded one of the two raw zips from the ZTE USA site that had a very long name.zip with all numbers. The "update.zip" was nestled inside after unzipping the file on the phone. I just picked that file and moved it to ther root and applied the update. It went through successfully. Did i not apply it correctly? Should i have just renamed that whole file to "update.zip" and moved the entire folder? A little confused. But i imagine if the update took and i saw the 32 in the current build of the device it took. But im not sure.
Click to expand...
Click to collapse
Nah that's okay. I thought you downloaded the 'update.zip' directly. Happens sometimes
It’s weird the update was only about 2 GB. What do you think was the rest of the file?
Maybe in case it needed the full firmware. In this case it didn’t probably. Just a guess
macboss said:
Maybe in case it needed the full firmware. In this case it didn’t probably. Just a guess
Click to expand...
Click to collapse
No, that doesn't make sense. No idea really.
It couldn't have gone wrong so don't stress out. Your phone works. If it didn't work then yeah, something was wrong...