hi i have the at&t galaxy s4 with the mf3 baseband and i would like to root it.
i was wondering if there be any way to restore back to stock? like if i dont want it rooted anymore or i mess it up can take it off and go back to complete stock?
i know "Odin" wont work with the mf3 but how bad can you mess it up to actually need to use a recovery tool? is it easy to ruin it by doing to rooting process?
i want to root my galaxy to be able to install the tmobile rom on it to use wifi calling. and use the safestrap recovery to install the rom
if everything goes well and works will i be able to remove it all and go back to stock?
or if everything goes bad and i ruin it can i recover back to stock?
im curious if its worth the risk at all? or is there not a big risk?
thanks
Odin does work on MF3, and you CAN restore your phone to stock, you just need to download the tar files. General section, mf3 md5 files thread.
General section, SafeRoot thread will take care of your root requests. It's so easy a monkey could do it.
You won't get T-Mobile wifi calling on a non T-Mobile phone unless big changes have been made since I left the company last year, but you can flash roms with SafeStrap.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
1) Is there a rooting method for the T-Mo version already? I'm sort of unclear based on the threads.
2) Does rooting wipe the device?
3) is anything like safestrap needed for rooting, or just if we want custom recovery?
All I really want is to remove bloat.
km8j said:
1) Is there a rooting method for the T-Mo version already? I'm sort of unclear based on the threads.
2) Does rooting wipe the device?
3) is anything like safestrap needed for rooting, or just if we want custom recovery?
All I really want is to remove bloat.
Click to expand...
Click to collapse
Not yet!
Okay so I've been browsing through the forums and been reading up on this phone (even contacted Samsung about info on unlocking the bootloader, no go on that. Had to try though)
Basically I want to know what's the proper procedure for installing custom roms on an NC4 device 4.4.2
Things I know:
Bootloader is unlockable at the moment (hoping for some good news in the future)
Towelroot for rooting
Safestrap for recovery
(Both just download and install the apk)
Things I don't know:
Kernel?
Somebody said I had to flash the NC2 kernel via Odin?
Knox?
What is this? What trips it?
I did see the list of guides and I did read and watch all the necessary ones, but the date on those are from 2 years ago and I just need confirmation on if I'm going about this right.
Any help is appreciated. I thank you in advance for taking the time to read this.
Please excuse my lack of knowledge, this is my first Samsung device.
Also, what would happen if somebody were to flash the DE stock files via Odin to a Retail N3?
If you upgraded to NC4 or NK1, you're stuck until Samsung unlocks the bootloader or Verizon stops lying to their customers. There is no root available after upgrade at this moment in time.
Dravekx said:
If you upgraded to NC4 or NK1, you're stuck until Samsung unlocks the bootloader or Verizon stops lying to their customers. There is no root available after upgrade at this moment in time.
Click to expand...
Click to collapse
I didn't upgrade to NC4, it came like this.
rdar_93 said:
I didn't upgrade to NC4, it came like this.
Click to expand...
Click to collapse
That sucks. You can't do anything about it at the moment. I was forced to upgrade and lost root. Custom ROMs won't be available to you or me until someone finds a hole to unlock the bootloader. Welcome to our Verizon Note 3 rooting dilemma.
mirrin said:
You do not have a dev version so cm 11 or 12 is a far off dream you won't get. Your bootloader is locked there is no unlock.
You are in luck nc4 is root able using towel root then safe strap and the unified firmware. You will need odin and a pc for flashing a few things the NK1 modem towel root and the unified firmware. Pick a rom from the development thread i suggest jasmine 1.x or eclipse.
Click to expand...
Click to collapse
Copied from another post I had.
I don't know much about the device which is why I'm trying to find out.
Dravekx said:
That sucks. You can't do anything about it at the moment. I was forced to upgrade and lost root. Custom ROMs won't be available to you or me until someone finds a hole to unlock the bootloader. Welcome to our Verizon Note 3 rooting dilemma.
Click to expand...
Click to collapse
I actually just got root on my phone, I felt adventurous and installed towelroot and voila it rooted my phone.
I should state that I'm on 4.4.2, not 4.4.4.
Checked root status with Titanium Backup Pro, everything checked out a-okay.
rdar_93 said:
Okay so I've been browsing through the forums and been reading up on this phone (even contacted Samsung about info on unlocking the bootloader, no go on that. Had to try though)
Basically I want to know what's the proper procedure for installing custom roms on an NC4 device 4.4.2
Things I know:
Bootloader is unlockable at the moment (hoping for some good news in the future)
Towelroot for rooting
Safestrap for recovery
(Both just download and install the apk)
Things I don't know:
Kernel?
Somebody said I had to flash the NC2 kernel via Odin?
Knox?
What is this? What trips it?
I did see the list of guides and I did read and watch all the necessary ones, but the date on those are from 2 years ago and I just need confirmation on if I'm going about this right.
Any help is appreciated. I thank you in advance for taking the time to read this.
Please excuse my lack of knowledge, this is my first Samsung device.
Also, what would happen if somebody were to flash the DE stock files via Odin to a Retail N3?
Click to expand...
Click to collapse
Ahhhh... You're good to go then! Find a good custom ROM and follow the instructions. Whatever you do.. Don't upgrade!
rdar_93 said:
I actually just got root on my phone, I felt adventurous and installed towelroot and voila it rooted my phone.
I should state that I'm on 4.4.2, not 4.4.4.
Checked root status with Titanium Backup Pro, everything checked out a-okay.
Click to expand...
Click to collapse
Dravekx said:
Ahhhh... You're good to go then! Find a good custom ROM and follow the instructions. Whatever you do.. Don't upgrade!
Click to expand...
Click to collapse
Lol I still need clarification on the Kernel information that I don't know about.
What do I need to flash?
Do I flash it after I install a custom rom or before?
rdar_93 said:
Lol I still need clarification on the Kernel information that I don't know about.
What do I need to flash?
Do I flash it after I install a custom rom or before?
Click to expand...
Click to collapse
My opinion: If you're doing a custom kernel, make sure it works with whatever ROM you're flashing. I suggest sticking with the stock kernel* until you get the hang of things OR do a little research and learn a bit before you attempt anything. There's a lot of forums with details and help here. I've installed kernels before and after installing ROMs with little or zero problems, but I'm more of a dabbler than a professional.
I would suggest backing up your current setup in case you need to reflash. That's a definite.
Dravekx said:
My opinion: If you're doing a custom kernel, make sure it works with whatever ROM you're flashing. I suggest sticking with the stock kernel* until you get the hang of things OR do a little research and learn a bit before you attempt anything. There's a lot of forums with details and help here. I've installed kernels before and after installing ROMs with little or zero problems, but I'm more of a dabbler than a professional.
I would suggest backing up your current setup in case you need to reflash. That's a definite.
Click to expand...
Click to collapse
Lol that doesn't really answer the question. I hope somebody sees it and clears it up for me
rdar_93 said:
Lol that doesn't really answer the question. I hope somebody sees it and clears it up for me
Click to expand...
Click to collapse
The kernel can't be changed...although it can be "tuned" if you have root.
http://forum.xda-developers.com/showthread.php?p=58813428
Sent from my Note 3 via Tapatalk
Still hoping somebody helps me out and posts a short but precise guide to install a custom rom on 4.4.2 NC4
I don't want to end up bricking my device on the first try. I've been there already and it sucks lol
rdar_93 said:
Still hoping somebody helps me out and posts a short but precise guide to install a custom rom on 4.4.2 NC4
I don't want to end up bricking my device on the first try. I've been there already and it sucks lol
Click to expand...
Click to collapse
It really depends on the ROM, there is no set guide for all ROMs.
Did you install busybox? I like using busybox on rails. Just download the app and click install.
Download the safestrap apk (3.75 B04) and install that, open it and install recovery.
I'm currently running Clean ROM. I am on NC4. I downloaded the rom, and moved it to my SD card. I rebooted to safestrap, wiped data, cache and dalvik then installed the ROM to the stock slot. Then, following the instructions for Clean ROM, I rebooted to download mode from recovery and flashed the NC2 Kernel with odin.
The main thing is to read the installation instructions for the particular ROM you want to flash.
Don't forget to use Titanium backup to freeze SDM app (I think that's what its called) so your phone will stop trying to update.
---------- Post added at 05:29 PM ---------- Previous post was at 05:23 PM ----------
rdar_93 said:
Still hoping somebody helps me out and posts a short but precise guide to install a custom rom on 4.4.2 NC4
I don't want to end up bricking my device on the first try. I've been there already and it sucks lol
Click to expand...
Click to collapse
If you're at all proficient with Odin it is really REALLY hard to brick these phones.
BladeRunner said:
It really depends on the ROM, there is no set guide for all ROMs.
Did you install busybox? I like using busybox on rails. Just download the app and click install.
Download the safestrap apk (3.75 B04) and install that, open it and install recovery.
I'm currently running Clean ROM. I am on NC4. I downloaded the rom, and moved it to my SD card. I rebooted to safestrap, wiped data, cache and dalvik then installed the ROM to the stock slot. Then, following the instructions for Clean ROM, I rebooted to download mode from recovery and flashed the NC2 Kernel with odin.
The main thing is to read the installation instructions for the particular ROM you want to flash.
Don't forget to use Titanium backup to freeze SDM app (I think that's what its called) so your phone will stop trying to update.
---------- Post added at 05:29 PM ---------- Previous post was at 05:23 PM ----------
If you're at all proficient with Odin it is really REALLY hard to brick these phones.
Click to expand...
Click to collapse
Thanks man, I was supposed to update this thread saying that I got through with the proper procedure for installing Jasmine Rom
Although I was running Eclipse before, and I wanted to try going back to stock but it just got stuck on the Verizon splash screen
I'm thinking it's because I had the NC2 kernel active when I should have gone back to the NC4 kernel
I looked for a NC4 kernel to flash but I only saw the modems and tar files, so not knowing if those were the same as kernels I decided to just try Jasmine. So far, I like it.
I have crazy battery drain though. I think it's because I'm running it in Slot 1
just picked up a verizon note 3 android 4.4.2 NC4
one of the very first posts above says you cant do anything on NC4 and then another post says NC4 is ok but just not android 4.4.4
NC4 is the latest update as of this writing isnt it?
what can actually be done with this vzw note 3 on android 4.4.2 NC4?
non dev edition of course
what about knox?
if rooting can be done with this phone on this OS is there any safe way not to trip knox?
en11gma said:
just picked up a verizon note 3 android 4.4.2 NC4
one of the very first posts above says you cant do anything on NC4 and then another post says NC4 is ok but just not android 4.4.4
NC4 is the latest update as of this writing isnt it?
what can actually be done with this vzw note 3 on android 4.4.2 NC4?
non dev edition of course
what about knox?
if rooting can be done with this phone on this OS is there any safe way not to trip knox?
Click to expand...
Click to collapse
I'd be happy to answer your questions
If you have an NC4 device that's running 4.4.2, you are able to gain root access and install safestrap recovery on your device. However, if the android version is 4.4.4, you cannot root or install safestrap.
NC4 is just our last build number, but there are two versions I think, the 4.4.2 and the 4.4.4. In the 4.4.4, they blacklisted every single compatible kernel that could work on the device. They forgot to do it in the 4.4.2 version, that's why we're able to gain root.
On our NC4 4.4.2 Verizon Note 3, we can root, install safestrap recovery and install a very limited amount of roms from the non developer edition selection on the XDA forums.
Rooting via towelroot, to my knowledge, does not trip knox. However, installing safestrap recovery does. But if you're worried about your warranty being voided, I wouldn't panic too much because with our bootloader being locked, it is very easy to flash the original Stock Verizon files through Odin to go straight back to factory settings so it looks like if you just pulled it out the box. The knox code would be reset and you would have a device that looked like if it has never been rooted or modified.
rdar_93 said:
I'd be happy to answer your questions
If you have an NC4 device that's running 4.4.2, you are able to gain root access and install safestrap recovery on your device. However, if the android version is 4.4.4, you cannot root or install safestrap.
NC4 is just our last build number, but there are two versions I think, the 4.4.2 and the 4.4.4. In the 4.4.4, they blacklisted every single compatible kernel that could work on the device. They forgot to do it in the 4.4.2 version, that's why we're able to gain root.
On our NC4 4.4.2 Verizon Note 3, we can root, install safestrap recovery and install a very limited amount of roms from the non developer edition selection on the XDA forums.
Rooting via towelroot, to my knowledge, does not trip knox. However, installing safestrap recovery does. But if you're worried about your warranty being voided, I wouldn't panic too much because with our bootloader being locked, it is very easy to flash the original Stock Verizon files through Odin to go straight back to factory settings so it looks like if you just pulled it out the box. The knox code would be reset and you would have a device that looked like if it has never been rooted or modified.
Click to expand...
Click to collapse
Safestrap does not trip knox.
mjh68 said:
Safestrap does not trip knox.
Click to expand...
Click to collapse
Thanks. I must have tripped mine somehow cause my device says "custom" when booting.
I'm guessing it might be Xposed but I'm not too sure.
rdar_93 said:
Thanks. I must have tripped mine somehow cause my device says "custom" when booting.
I'm guessing it might be Xposed but I'm not too sure.
Click to expand...
Click to collapse
It will say custom, but that isn't tripping knox. Custom can be removed with the triangle away app. Custom just gets flagged like you were saying by changing the recovery , but it doesn't trip the knox counter.
mjh68 said:
It will say custom, but that isn't tripping knox. Custom can be removed with the triangle away app. Custom just gets flagged like you were saying by changing the recovery , but it doesn't trip the knox counter.
Click to expand...
Click to collapse
Then I must be confused about what knox really is.
What is "Knox" then?
I have an S4 that is rooted with safestrap recovery (3.72). Still the stock ROM. What is the easiest way to return to full stock and be able to receive OTA upgrades? The first thing I always do with my android devices is root and flash custom recovery. Now that I did all of that, I realize I will probably not flash that many roms as I don't want to take up that much internal storage and such.
I know how to remove Safestrap recovery, but don't quite know what the best way to return to full stock would be.
Thanks for any help!
John
crash447 said:
I have an S4 that is rooted with safestrap recovery (3.72). Still the stock ROM. What is the easiest way to return to full stock and be able to receive OTA upgrades? The first thing I always do with my android devices is root and flash custom recovery. Now that I did all of that, I realize I will probably not flash that many roms as I don't want to take up that much internal storage and such.
I know how to remove Safestrap recovery, but don't quite know what the best way to return to full stock would be.
Thanks for any help!
John
Click to expand...
Click to collapse
Flash the nb1 tar file in Odin. Then ota to nj4. See the general forum
Sent from my Nexus 5 using XDA Free mobile app
Thank you. That was the direction I was going to go, but wanted to make sure there wasn't an easier route.