hi.; title says all. i forgot the lock pattern, and then i got to the google log in screen. i kept logging in but there was no internet so it would not move forward.
then i pressed home and vol down to hard reset. it took me to the twrp recovery/.
there i went to wipe and reset menu and reset, everything. even system, dalvik, data.
now it is in lg boot loop. i cant do anything.
i have tried again to reset but only data and dalvik and still boot loop.
IMPORTANT NOTE, MY PHONE IS D800, it has cloudy rom before this bootloop and working fine. it showed D802 in about phone but removing cover shows D800.
what to do? i dont want to go to stock because i have all my images and videos in this also contacts. pls help
What about download mode work or no
---------- Post added at 12:11 PM ---------- Previous post was at 12:09 PM ----------
U have boot loop because u wipe system
amin44 said:
What about download mode work or no
---------- Post added at 12:11 PM ---------- Previous post was at 12:09 PM ----------
U have boot loop because u wipe system
Click to expand...
Click to collapse
yes i can go to download mode. im actually downloading the stock rom, but still if anyone can help and tell me any solution other than stock rom, that would be helpful a lot because i have got a lot of important family photos and also some personal documents in this which i dont want to lose
PS: in download mode it even shows ROOTED in bottom. any solution?
To remove "rooted" flash tot mothed. Can u enter twrp
amin44 said:
To remove "rooted" flash tot mothed. Can u enter twrp
Click to expand...
Click to collapse
yes i can enter twrp, when i press vol down and power, it asks me to press power again to confirm to reset and then takes me to twrp. i dont want tot, that is my last resort. i want anyother solution if possible.
Do u have ROM zip in sdcard
amin44 said:
Do u have ROM zip in sdcard
Click to expand...
Click to collapse
i wish i had it.... and it was just last week i removed the back up from mobile as well ...
There is way to flash ROM zip via PC usbdisc for PC just search in Google and for USB u need otg cable
---------- Post added at 12:28 PM ---------- Previous post was at 12:25 PM ----------
I will try to give u YouTube video
amin44 said:
There is way to flash ROM zip via PC usbdisc for PC just search in Google and for USB u need otg cable
---------- Post added at 12:28 PM ---------- Previous post was at 12:25 PM ----------
I will try to give u YouTube video
Click to expand...
Click to collapse
that will be helpful. also can u tell if i can save my images and files in this state? i think its impossible but still anyway?
i dont know . see this https://www.youtube.com/watch?v=YP1LVOKgwQM
aami.aami said:
hi.; title says all. i forgot the lock pattern, and then i got to the google log in screen. i kept logging in but there was no internet so it would not move forward.
then i pressed home and vol down to hard reset. it took me to the twrp recovery/.
there i went to wipe and reset menu and reset, everything. even system, dalvik, data.
now it is in lg boot loop. i cant do anything.
i have tried again to reset but only data and dalvik and still boot loop.
IMPORTANT NOTE, MY PHONE IS D800, it has cloudy rom before this bootloop and working fine. it showed D802 in about phone but removing cover shows D800.
what to do? i dont want to go to stock because i have all my images and videos in this also contacts. pls help
Click to expand...
Click to collapse
You can also use adb sideload to flash the ROM. Install kouch universal adb drivers and download minimal adb and fastboot both can be downloaded from a Google search. Then on your phone go to twrp advanced and adb sideload. Then put the ROM.zip folder in the minimal adb and fastboot folder. Then hold shift right click and press run command line here. Type "adb devices" if it finds your device then use this command "adb sideload *ROMNAME.ZIP*. Replace * and ROM name with the proper name of your zip file.
Sent from my LG-D800 using Tapatalk
I came esta upgrade and had previously rooted and will not let me install I put the official says recovery not fail me
cm13.1 -znh2kas254 incremental
why dont you manually flash (recovery?) or update over fastboot
bobthecooldad said:
why dont you manually flash (recovery?) or update over fastboot
Click to expand...
Click to collapse
how do you update over fastboot ?? don't we need stock recovery for that ?
no, you need to first install (http://forum.xda-developers.com/showthread.php?p=48915118#post48915118)
Now turn off your phone and hold volume up at the same time you press the power button (with the usb cable in)
To check if the device is detected, run cmd and run "fastboot", lots of text should appear if nothing does reinstall or reboot. To check for devices do "fastboot devices"
---------- Post added at 02:45 PM ---------- Previous post was at 02:43 PM ----------
this is for recovery
fastboot flash recovery recovery.img
(recovery needs to be in your username drive (Windows 7-10 for example for me it is C:\users\gaming)
(credit to http://forum.xda-developers.com/showthread.php?t=2131284 for information)
Model number is SM-G935FD and it is on Marshmallow 6.0.1
Can someone direct me on how I can root my phone? .. I just want to root it and still use the stock rom. Any help would be appreciated.. ><
I suggest you don't try this, since you're a new user and you're having a hard time even finding the appropriate thread. You can actually ruin your phone beyond repair by misunderstanding one thing, pressing one wrong button or forgetting one small thing. Nevertheless, the thread is here: https://forum.xda-developers.com/s7...overy-official-twrp-hero2lte-3-0-0-0-t3334084
I think the instructions in this thread aren't quite up to date (format data). I rewrote the instructions to be more clear. I did follow all these yesterday (running NOUGAT) and it worked for me. But I'm no dev. Don't ask me for help if you get any problems, small or disastrous.
FULL STEPS FOR OBTAINING Root ON THE EXYNOS VERSION OF THE GALAXY S7 EDGE (SM-G935F/FD/X, SM-G935K/L/S, SM-G935W8)
A. There has to be an external SD card in your phone.
B. You have to be on an Axxx firmware.
C. Backup everything. You will lose all your data, apps, pictures, settings. Everything except the content of the external SD.
D. If you lack either A, or B, or C, or if you do anything any different than described here, you risk ruining your phone. I can't help you if you do anything wrong.
E. If you do everything right but you have a bad download, you accidentally remove the USB cable in the wrong moment or your pc loses power, you might end up with a ruined phone. This is never risk free.
F. You will lose your warranty.
1.In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
2. Go to Settings -> Developer options. Enable OEM unlock.
3. Download Odin_3.12.3.zip and extract it to your computer. https://build.nethunter.com/samsung-tools/Odin_3.12.3.zip
4. Download and install Samsung Mobile Phone Drivers. http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
5. Download twrp-3.0.1-1-hero2lte.img.tar https://eu.dl.twrp.me/hero2lte/
6. Turn off your device.
7. Connect it to your pc through USB and don't disconnect before you're done with step 24.
8. Hold [Power] + [Volume Down] + [Home] buttons until you reach the Download mode warning screen.
9. Press [Volume Up] to continue.
10. Open Odin, press [AP] and navigate to the TWRP tar file from step 5.
11. Select [Options] and disable Auto-Reboot.
12 Press [Start].
13. Wait for Odin to say [PASS]
14. Hold [Volume Down] + [Home] + [Power]. When the screen gets black, immediately move the [Volume down] finger to [Volume up]. Don't let go the other two buttons.
15. If you don't see the TWRP boot splash try again from step 6.
16. In twrp, swipe right to allow system modifications, then go to [Wipe]
17. Don't go to [advanced], dont check any boxes, but chose [format data]. Write [yes] when instructed.
18. Download the latest SuperSU by Chainfire
https://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip
19. Without exiting TWRP, transfer the SuperSU zip to the external SD card in your device through “my computer”in Windows.
20. Flash superSU using [Install] in TWRP.
21. Download no-verity-opt-encript-5.1.zip and
without exiting TWRP, transfer the no-verity-opt-encrypt zip to the external SD card through Windows. https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
22. Flash the zip using [Install] in TWRP.
23. Go to [Reboot] -> [System].
24. Wait 2-5 minutes for your device to finish setting itself up.
---------- Post added at 12:28 PM ---------- Previous post was at 12:26 PM ----------
Don't do it. I don't guarantee a single thing.
---------- Post added at 12:34 PM ---------- Previous post was at 12:28 PM ----------
Make three backups in twrp before you flash supersu. One for boot, one for efs and one for everything.
jaime79 said:
Model number is SM-G935FD and it is on Marshmallow 6.0.1
Can someone direct me on how I can root my phone? .. I just want to root it and still use the stock rom. Any help would be appreciated.. ><
Click to expand...
Click to collapse
You can use CF-AutoRoot if you're on marshmallow.
At the moment I'm just starting to write this guide. My English is bad , so please help me: write down the mistakes I made and how to fix them. :highfive:
Software
ADB/Fastboot
Drivers for ADB/Fastboot
Flash.bat
Needed firmware (now i recomend install TOS373J)
Remember! With firmware you will lose all your data!
Installing
1. Unpack adb.zip and flash.zip to C:\Android
2. Unpack your shoosen firmware to C:\Android
3. Open developer options and turn on "OEM unlocking"
4. Power off smartphone,press "+" and "power"
5. Connect smartphone to PC and install drivers
6. Open cmd and write "cd C:\Android"
7. Next "fastboot oem unlock" and accept on display of smartphone
8. After reboot power off smartphone and press "+" and "power"
9. Write "fastboot flashing unlock_critical" and accept on display of smartphone
10. Open flash.bat in C:\Android and press "enter"
11. Wait when flashing finish and disconnect smartphone
12. After flash finishing write "fastboot flashing lock_critical" and wait reboot
13. Next boot to fastboot and write "fastboot oem lock" and wait reboot
I'm trying to use this on my swift 2 (Oreo) I get a lot of errors when I run flash.bat.
---------- Post added at 08:54 PM ---------- Previous post was at 08:47 PM ----------
Are there commands to flash the image via cmd?
Kenif1983 said:
I'm trying to use this on my swift 2 (Oreo) I get a lot of errors when I run flash.bat.
---------- Post added at 08:54 PM ---------- Previous post was at 08:47 PM ----------
Are there commands to flash the image via cmd?
Click to expand...
Click to collapse
Need flash via cmd.exe.
I recently acquired an lg v35 ThinQ that seems to be stuck on the fastboot loader, it only says reboot and shutdown and reboots to the fastboot recovery but wont boot up. Help!
I would recommend backing up and erasing laf_a and laf_b. Then restoring the original boot_a, boot_b, abl_a, and abl_b and starting over. If you need any of these files for the ULM version, I have them.
Error-404-Go-Home said:
I would recommend backing up and erasing laf_a and laf_b. Then restoring the original boot_a, boot_b, abl_a, and abl_b and starting over. If you need any of these files for the ULM version, I have them.
Click to expand...
Click to collapse
If you have them they would be of great help since i did not do this in the first place, just trying to fix it
I extracted these from the V350ULM10i_00_NAO_US_OP_0221.kdz using these scripts: https://github.com/ehem/kdztools
These files are for Oreo V350ULM only, they will not work with the V350AWM image (I have tried)
This method has worked for me in the past. Just flash these to their respective partitions with QFIL and it should work again (without root, of course... that requires you to modify boot_a and boot_b). If you need any more images (system_a, system_b...) from this kdz or others feel free to ask.
https://drive.google.com/drive/folders/11kWqa7k1MBSCDwP_ThN9VOT8CbsDVra0?usp=sharing
Error-404-Go-Home said:
I extracted these from the V350ULM10i_00_NAO_US_OP_0221.kdz using these scripts: https://github.com/ehem/kdztools
These files are for Oreo V350ULM only, they will not work with the V350AWM image (I have tried)
This method has worked for me in the past. Just flash these to their respective partitions with QFIL and it should work again (without root, of course... that requires you to modify boot_a and boot_b). If you need any more images (system_a, system_b...) from this kdz or others feel free to ask.
https://drive.google.com/drive/folders/11kWqa7k1MBSCDwP_ThN9VOT8CbsDVra0?usp=sharing
Click to expand...
Click to collapse
Qfil does not recognize any usb device
TheLaptopBros12 said:
Qfil does not recognize any usb device
Click to expand...
Click to collapse
the lg v35 only shows the fastboot screen
You should still be able to put it in 9008 mode by holding power + volume down + rapidly pressing volume up while plugged into a pc
---------- Post added at 06:46 PM ---------- Previous post was at 06:45 PM ----------
You can open up QFIL and try over and over again until it shows up as QUALCOM USB... instead of "no port"
Error-404-Go-Home said:
You should still be able to put it in 9008 mode by holding power + volume down + rapidly pressing volume up while plugged into a pc
---------- Post added at 06:46 PM ---------- Previous post was at 06:45 PM ----------
You can open up QFIL and try over and over again until it shows up as QUALCOM USB... instead of "no port"
Click to expand...
Click to collapse
I cant seem to do it.
Can't get it into 9008 mode or open QFIL?
Error-404-Go-Home said:
Can't get it into 9008 mode or open QFIL?
Click to expand...
Click to collapse
QFIL works but 9008 does not. it only gets to the fastboot menu.
You can also install ADB and use "fastboot flash abl_a path/to/abl_a.image" to flash it in fastboot mode. That only works if your bootloader is unlocked though.
Error-404-Go-Home said:
You can also install ADB and use "fastboot flash abl_a path/to/abl_a.image" to flash it in fastboot mode. That only works if your bootloader is unlocked though.
Click to expand...
Click to collapse
i dont think it is. i also tried download mode, does not work.
If you have not executed fastboot oem unlock in fastboot mode I would recommend trying it and flashing the files previously mentioned. If oem-unlock does not work, I would recommend to continue trying to get it into 9008 mode. I have previously been stuck in fastboot mode as well and I just held power and volume down, where it instantly turned off, (because fastboot mode had power off selected) then, as I kept holding the power and the volume down buttons it rebooted and I started rapidly spamming the volume up button (while still holding power and volume down). That got it into 9008 mode, I would recommend similar steps, or just try holding power and volume down while rapidly spamming volume up until it works.
---------- Post added at 08:39 PM ---------- Previous post was at 08:33 PM ----------
You can also try "fastboot flashing unlock" instead of "fastboot oem unlock"
Im In, how do i set the files in QFIL? Never done before
into 9008 mode and qfil Works and detects
I recommend reading over the
"Step 2: Partition Extraction, Modification and Bootloader Unlock"
section of this great guide
https://forum.xda-developers.com/lg-v35/development/bootloader-unlock-root-instruction-t4052145
but the gist is
Set the "emmc" in the bottom right to "ufs"
then select "Flat build" and select the "firehose" file as a programmer (that can be downloaded from the guide)
and open up partition manager under tools in the upper left of QFIL
once you have the partition manager open, you can select a partition (ex. abl_a), click manage partiton, then click load image. Then load the respective image file.
Do that for laf_a, laf_b, abl_a, abl_b, boot_a, and boot_b
Then exit out of the partiton manager, reboot the device, and it should work
---------- Post added at 08:58 PM ---------- Previous post was at 08:54 PM ----------
Note: I have noticed that if you are in 9008 mode for too long, then it will error when you try to open the partiton manager saying Sahara mode FAILED or something like that. This just means that you have to hold volume down and power until it reboots and get it back into 9008 mode like before, then try to open the partition manager quicker.
Error-404-Go-Home said:
I recommend reading over the
"Step 2: Partition Extraction, Modification and Bootloader Unlock"
section of this great guide
https://forum.xda-developers.com/lg-v35/development/bootloader-unlock-root-instruction-t4052145
but the gist is
Set the "emmc" in the bottom right to "ufs"
then select "Flat build" and select the "firehose" file as a programmer (that can be downloaded from the guide)
and open up partition manager under tools in the upper left of QFIL
once you have the partition manager open, you can select a partition (ex. abl_a), click manage partiton, then click load image. Then load the respective image file.
Do that for laf_a, laf_b, abl_a, abl_b, boot_a, and boot_b
Then exit out of the partiton manager, reboot the device, and it should work
---------- Post added at 08:58 PM ---------- Previous post was at 08:54 PM ----------
Note: I have noticed that if you are in 9008 mode for too long, then it will error when you try to open the partiton manager saying Sahara mode FAILED or something like that. This just means that you have to hold volume down and power until it reboots and get it back into 9008 mode like before, then try to open the partition manager quicker.
Click to expand...
Click to collapse
I can't reboot, stuck in 9008 mode
Hold power and volume down to reboot
Error-404-Go-Home said:
Hold power and volume down to reboot
Click to expand...
Click to collapse
I got it.
problem though, now to says it is not secure and onlly boots to fastboot but before that it shows the link g.co/ABH
TheLaptopBros12 said:
I got it.
problem though, now to says it is not secure and onlly boots to fastboot but before that it shows the link g.co/ABH
Click to expand...
Click to collapse
and now back at square 1, now again
like this guy https://forum.xda-developers.com/lg-v35/how-to/v35-bricked-sad-t3960057
you likely did not have the right version of android for the files I gave you. There isn't much of a way to tell I guess.
---------- Post added at 10:45 PM ---------- Previous post was at 10:41 PM ----------
Can you get into download mode? Try turning the phone off via fastboot mode (use volume keys to select the "Power Off" option) then hold volume down while plugging it into a computer. If that doesnt work try again holding volume up. If this gets you into download mode, then you might be able to flash the whole kdz with LGUP.