Model number is SM-G935FD and it is on Marshmallow 6.0.1
Can someone direct me on how I can root my phone? .. I just want to root it and still use the stock rom. Any help would be appreciated.. ><
I suggest you don't try this, since you're a new user and you're having a hard time even finding the appropriate thread. You can actually ruin your phone beyond repair by misunderstanding one thing, pressing one wrong button or forgetting one small thing. Nevertheless, the thread is here: https://forum.xda-developers.com/s7...overy-official-twrp-hero2lte-3-0-0-0-t3334084
I think the instructions in this thread aren't quite up to date (format data). I rewrote the instructions to be more clear. I did follow all these yesterday (running NOUGAT) and it worked for me. But I'm no dev. Don't ask me for help if you get any problems, small or disastrous.
FULL STEPS FOR OBTAINING Root ON THE EXYNOS VERSION OF THE GALAXY S7 EDGE (SM-G935F/FD/X, SM-G935K/L/S, SM-G935W8)
A. There has to be an external SD card in your phone.
B. You have to be on an Axxx firmware.
C. Backup everything. You will lose all your data, apps, pictures, settings. Everything except the content of the external SD.
D. If you lack either A, or B, or C, or if you do anything any different than described here, you risk ruining your phone. I can't help you if you do anything wrong.
E. If you do everything right but you have a bad download, you accidentally remove the USB cable in the wrong moment or your pc loses power, you might end up with a ruined phone. This is never risk free.
F. You will lose your warranty.
1.In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
2. Go to Settings -> Developer options. Enable OEM unlock.
3. Download Odin_3.12.3.zip and extract it to your computer. https://build.nethunter.com/samsung-tools/Odin_3.12.3.zip
4. Download and install Samsung Mobile Phone Drivers. http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
5. Download twrp-3.0.1-1-hero2lte.img.tar https://eu.dl.twrp.me/hero2lte/
6. Turn off your device.
7. Connect it to your pc through USB and don't disconnect before you're done with step 24.
8. Hold [Power] + [Volume Down] + [Home] buttons until you reach the Download mode warning screen.
9. Press [Volume Up] to continue.
10. Open Odin, press [AP] and navigate to the TWRP tar file from step 5.
11. Select [Options] and disable Auto-Reboot.
12 Press [Start].
13. Wait for Odin to say [PASS]
14. Hold [Volume Down] + [Home] + [Power]. When the screen gets black, immediately move the [Volume down] finger to [Volume up]. Don't let go the other two buttons.
15. If you don't see the TWRP boot splash try again from step 6.
16. In twrp, swipe right to allow system modifications, then go to [Wipe]
17. Don't go to [advanced], dont check any boxes, but chose [format data]. Write [yes] when instructed.
18. Download the latest SuperSU by Chainfire
https://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip
19. Without exiting TWRP, transfer the SuperSU zip to the external SD card in your device through “my computer”in Windows.
20. Flash superSU using [Install] in TWRP.
21. Download no-verity-opt-encript-5.1.zip and
without exiting TWRP, transfer the no-verity-opt-encrypt zip to the external SD card through Windows. https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
22. Flash the zip using [Install] in TWRP.
23. Go to [Reboot] -> [System].
24. Wait 2-5 minutes for your device to finish setting itself up.
---------- Post added at 12:28 PM ---------- Previous post was at 12:26 PM ----------
Don't do it. I don't guarantee a single thing.
---------- Post added at 12:34 PM ---------- Previous post was at 12:28 PM ----------
Make three backups in twrp before you flash supersu. One for boot, one for efs and one for everything.
jaime79 said:
Model number is SM-G935FD and it is on Marshmallow 6.0.1
Can someone direct me on how I can root my phone? .. I just want to root it and still use the stock rom. Any help would be appreciated.. ><
Click to expand...
Click to collapse
You can use CF-AutoRoot if you're on marshmallow.
Related
I need help guys because i lost my twrp recovery while flashing the xenon rom. The problem is now my phone is also not detected in adb devices in my laptop. I am running windows 10 i had installed twrp from this laptop. When ever i connect and give command ADB DEVICES the it doesn't show any devices found. I had installed all the drivers. My phone is running in the xenonhd rom. Pls help me how i can install twrp and how to correct adb.
Sent from my Lenovo A6000 using XDA-Developers mobile app
Lenevo A6000 Unbrick/Fix For Any Problem
It's common since, when modified, the A6000 doesn't have a way to directly boot into recovery without a System or ADB command (Power Hold > Reboot > Recovery and "adb reboot recovery" respectively). However you can always boot into Download mode which acts as an emergency subsystem at any time. Have a quick guide on how to do that and you'll be flashing away custom ROMs again in no time.
(Optional but recommended steps will be market with an asterisk (*))
Disclaimer: You are doing everything out of your own free will and volition. I am in no way responsible to any potential damage you might cause to your device. This can occur in cases of not following the guide properly.
Below is the fix for problems when the phone has no OS to reboot from. In case of Xenon which is rooted, follow this:
Easy Guide
(This is for when a phone already has an OS to boot from)
1. Open Terminal Emulator
2. Write
Code:
su
reboot recovery
(On any Superuser permissions pop-ups press Grant.)
3. Follow Steps 4 and 5 from the guide bellow.
Downloads
If you are on Kitkat (4.4.X), Download This (Mirror)
If you are on Lolipop (5.X.X), Download This (Mirror)
If you are not sure, download both and try both, no damage should be done.
[Source]
Instructions
1. Download all the prerequisite files.
2. Power Off Your Phone by removing the battery.* (See Note 1)
3. Hold the Volume Down and Power keys until the phone vibrates once and the Lenovo screen appears. At the bottom it should say "Powered by Android" and under it some small Chinese letters and "Power key long press can reboot phone". (See Note 2)
4. Extract the downloaded ZIP files anywhere you want. You should end up with a "TWRP" folder.
5. Open that TWRP folder and run "Boot-TWRP_A6000.bat"
6. If everything went well, you should be in TWRP recovery. Flash your desired ROM following the instructions from their thread, and everything should now be fine. (See Note 3)
Notes
1. I have noticed that sometimes my phone will not recognize that it's in Bootloader mode and will try to boot normally after a few seconds along with the fastboot not recognizing it. Theory: it doesn't shut down completely when rebooted via Holding the Power button, and tries to boot like nothing is wrong. I don't have a concrete fix, the best i can offer is to try different button combinations. (Vol. Down+Power / Vol. Up+Power / Vol. Up+Vol. Down+Power)
2. If you get the problem described in Note 1 do steps 4 and 5 before step 3. The .bat script will wait for the phone, as soon as it detects the Bootloader it will do it's job.
3. If something went wrong, leave a reply, I'll see if i can guide you through it. Remember to follow instructions carefully!
i had a simple sol....
Just boot into bootloader by Press n hold vol - an power ... den do wht u r doing .. Connect cable .. to pc.. n do the command in cmd.. That it
I have simple method
1. First root with kingoroot it is on click root method.
2.then install rashr
3.then flast twrp recovery img
4.then reboot to recovery.
---------- Post added at 03:56 PM ---------- Previous post was at 03:50 PM ----------
It is link for kingoroot
https://root-apk.kingoapp.com/kingoroot-download.htm
Download rashr via play store
I was totally in awe when my phone won't reboot to to recovery and download mode even tho i can reboot system normally and after I flash some recoveries all of them bootlooped my phone but that fix by AXAzor completely worked. Very huge thanks to @AXAz0r
blaspheme000 said:
I was totally in awe when my phone won't reboot to to recovery and download mode even tho i can reboot system normally and after I flash some recoveries all of them bootlooped my phone but that fix by AXAzor completely worked. Very huge thanks to @AXAz0r
Click to expand...
Click to collapse
Glad to hear that, cheers
flash twrp using flashify,rashr
i need to reinstall the original firmware for g950f but i cant find it anywhere
i want to root my device ... the file i did find doesnt seemt to load up custom roms
https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
Guides:
Notice: It may wipe all your data including those in internal storage.
Part 1 - HOW-TO FLASH TWRP:
1. In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
2. Go to Settings -> Developer options and enable OEM Unlock option.
3. Download and Install Samsung Mobile Phones Drivers.
- Option 1: Download and Install Smart Switch for PC.
- Option 2: Download and Install standalone driver package.
4. Download and extract Odin (Samsung's Flash Tool) to your computer.
5. Download a .tar image of TWRP.
6. Reboot your device to download mode.
- Hold [VOLUME DOWN] + [BIXBY] + [POWER] for approx. 15 seconds.
- Read the warning carefully.
- If you agree, press [VOLUME UP] to get into Download mode. If you don't agree, STOP.
7. Open Odin and place that TWRP tar file in the [AP] slot.
8. Connect your phone.
9. Hold [VOLUME UP] + [BIXBY] + [POWER] on your phone and then press start on Odin.
10. Wait for the phone to reboot. DO NOT release [VOLUME UP] + [BIXBY] + [POWER] or you may not reboot into TWRP.
Part 2 - HOW-TO INITIALIZE TWRP: (for new phones)
1. If you completed Part 1 successfully, you should be in TWRP now. At this point, you will reach the screen asking you if you want to allow system modifications.
2. Select "Keep /system RO". (Don't swipe right or you may not be able to boot into system if you failed to complete next steps. However, you can swipe right to allow modifications if you are confident that you can complete next steps.)
3. Go to "Wipe" menu of TWRP and you will find "Format Data". Press "Format Data" and type "yes" to continue.
4. Go to "Reboot" menu and Press "Recovery" to reboot TWRP.
5. Download the latest dm-verity and force encryption disabler zip on your computer.
6. Transfer the zip to your phone.
- Option 1: MTP: Connect your phone with computer and just copy the zip to internal storage. (similar to how you transfer files when in system.)
- Option 2: ADB: Connect your phone with computer and run command "adb push /path/to/zip /sdcard/".
- Option 3: External SD: Copy the zip to an external SD and then insert the card to your phone.
7. Go to "Install" menu of TWRP and flash the zip.
TWRP is initialized and fully functional at this stage. Now you can either reboot into system or root, flash custom ROMs via TWRP.
Part 3 - HOW-TO ROOT:
1. Download the flashable zip.
- Option 1: Magisk
- Option 2: SuperSU (untested)
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Part 3a - HOW-TO FLASH CUSTOM ROMS:
1. Download the flashable zip.
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Simple.
where can i find firmware original
Sammobile
wakkaday said:
where can i find firmware original
Click to expand...
Click to collapse
Samfirm tool or updato.com. No download speed limits
wakkaday said:
where can i find firmware original
Click to expand...
Click to collapse
http://updato.com/firmware-archive-select-model?exact=1&q=SM-G950F
click on your Country and load the firmware.
free and high speed (maybe use download manager)
TWRP does not ask for pin, and therefore does not decrypt my storage.
How can I fix this?
Twrp has no security, it can't read anything encrypted, if you just installed it you have to wipe storage and start fresh, its in the twrp thread.
Looks like the Galaxy S8 TWRP is not fully functional yet. It asked me too for a PIN on my previous phone (Xiaomi MI5) and I could work with my encrypted /data partition in TWRP.
twrp is fully functioning you need to flash the dm-verity and force encryption disabler zip after instaling twrp and wiping data . follow the instructions found in the twrp thread
https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
1. Download and Install Samsung Mobile Phones Drivers.
- Option 1: Download and Install Smart Switch for PC.
- Option 2: Download and Install standalone driver package.
2. Download and extract Odin (Samsung's Flash Tool) to your computer.
3. Download a .tar image of TWRP.
4. Reboot your device to download mode.
- Hold [VOLUME DOWN] + [BIXBY] + [POWER] for approx. 15 seconds.
- Read the warning carefully.
- If you agree, press [VOLUME UP] to get into Download mode. If you don't agree, STOP.
5. Open Odin and place that TWRP tar file in the [AP] slot.
6. Connect your phone.
7. Hold [VOLUME UP] + [BIXBY] + [POWER] on your phone and then press start on Odin.
8. Wait for the phone to reboot. DO NOT release [VOLUME UP] + [BIXBY] + [POWER] or you may not reboot into TWRP.
Part 2 - HOW-TO INITIALIZE TWRP: (for new phones)
1. If you completed Part 1 successfully, you should be in TWRP now. At this point, you will reach the screen asking you if you want to allow system modifications.
2. Select "Keep /system RO". (Don't swipe right or you may not be able to boot into system if you failed to complete next steps. However, you can swipe right to allow modifications if you are confident that you can complete next steps.)
3. Go to "Wipe" menu of TWRP and you will find "Format Data". Press "Format Data" and type "yes" to continue.
4. Go to "Reboot" menu and Press "Recovery" to reboot TWRP.
AT THIS STEP YOU CAN DIRECTLY GO TO PART 3 OF THIS GUIDE IF YOU WANT TO ROOT.
5. Download the latest dm-verity and force encryption disabler zip on your computer.
6. Transfer the zip to your phone.
- Option 1: MTP: Connect your phone with computer and just copy the zip to internal storage. (similar to how you transfer files when in system.)
- Option 2: ADB: Connect your phone with computer and run command "adb push /path/to/zip /sdcard/".
- Option 3: External SD: Copy the zip to an external SD and then insert the card to your phone.
7. Go to "Install" menu of TWRP and flash the zip.
TWRP is initialized and fully functional at this stage. Now you can either reboot into system or root, flash custom ROMs, Kernels via TWRP
Just rooted my Note 8 and Twrp says my Storage is 0MB
Unable to flash anything using TWRP and Magisk root is unstable too, did you manage to fix this, mine is 0MB with a swipe lockscreen and a pin too.
How to root J510H?
How to install roms?
How to install android pie roms on J510H?
#Note:if you have any question about J5 2016 put it in this post so if anyone knows the answer he can reply to the question.
Zaid Koudmani said:
How to root J510H?
How to install roms?
How to install android pie roms on J510H?
#Note:if you have any question about J5 2016 put it in this post so if anyone knows the answer he can reply to the question.
Click to expand...
Click to collapse
How to install custom recovery and root
1. Go to settings on your phone and go to 'about phone' and find where it says build number and click on it 7 times and you unlock developer options.
2. Go into developer options and enable USB debugging and OEM unlock.
3. Download Odin on your PC and install https://samsungodin.com
4. Download twrp .tar file to your PC
J500f is here https://twrp.me/samsung
5. Download USB drivers for your model(your PC should automatically do it when you connect your device)
6. Connect youe device to PC and turn your device off
Next you want to put it into download mode. To do this gold the power button, vol down button and home button simultaneously
7. Disable auto reboot in Odin on PC. Then click the AP tab and locate the twrp file.
Flash the file onto your phone and disconnect from the PC once finished.
Next part is really important.
8. DO NOT REBOOT YOUR DEVICE YET. if you reboot you will lose your custom recovery.
While the phone is still in download mode after you disconnect from PC just remove the battery do not turn it off or reboot it.
9. Put the battery back in and then hold power button, home button and vol up button (same as putting into download only volume up instead of volume down)
10. This should reboot you into your brand new twrp recovery.
11. Just reboot device from twrp settings for now.
12. Download magisk zip to your device. You will find latest stable on first post here https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
13. Turn your device off again. Reboot to recovery same as before (home button, power button and volume up button)
14. Click on install in twrp and locate the magisk.zip file and click on it and flash the file.
15. Reboot once done and go to magisk manager in your app drawer which the magisk.zip will install and thats it
---------- Post added at 11:48 AM ---------- Previous post was at 11:40 AM ----------
How to install a rom
You must have custom recovery installed see the above comment to install.
1. Download the rom you wish to install and put it on your external SD card
2. Reboot your device to recovery.
3. Go to wipe >> advanced wipe and wipe system, data, internal, dalvik and cache.
4. Go to install and search for your rom.zip on external SD card.
5. Flash it and thats it.
6. If you want Google apps (gapps) you will have to download a suitable gapps package for your device and new rom. If your new rom is android 9 pie then download arm gapps, android version 9 and I would recommend the lighter gapps package like nano or pico.
7. Flash gapps right after flashing your rom.
8. Optional wipe dalvik and cache just in case and thats it
garylawwd said:
How to install custom recovery and root
1. Go to settings on your phone and go to 'about phone' and find where it says build number and click on it 7 times and you unlock developer options.
2. Go into developer options and enable USB debugging and OEM unlock.
3. Download Odin on your PC and install https://samsungodin.com
4. Download twrp .tar file to your PC
J500f is here https://twrp.me/samsung
5. Download USB drivers for your model(your PC should automatically do it when you connect your device)
6. Connect youe device to PC and turn your device off
Next you want to put it into download mode. To do this gold the power button, vol down button and home button simultaneously
7. Disable auto reboot in Odin on PC. Then click the AP tab and locate the twrp file.
Flash the file onto your phone and disconnect from the PC once finished.
Next part is really important.
8. DO NOT REBOOT YOUR DEVICE YET. if you reboot you will lose your custom recovery.
While the phone is still in download mode after you disconnect from PC just remove the battery do not turn it off or reboot it.
9. Put the battery back in and then hold power button, home button and vol up button (same as putting into download only volume up instead of volume down)
10. This should reboot you into your brand new twrp recovery.
11. Just reboot device from twrp settings for now.
12. Download magisk zip to your device. You will find latest stable on first post here https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
13. Turn your device off again. Reboot to recovery same as before (home button, power button and volume up button)
14. Click on install in twrp and locate the magisk.zip file and click on it and flash the file.
15. Reboot once done and go to magisk manager in your app drawer which the magisk.zip will install and thats it
---------- Post added at 11:48 AM ---------- Previous post was at 11:40 AM ----------
How to install a rom
You must have custom recovery installed see the above comment to install.
1. Download the rom you wish to install and put it on your external SD card
2. Reboot your device to recovery.
3. Go to wipe >> advanced wipe and wipe system, data, internal, dalvik and cache.
4. Go to install and search for your rom.zip on external SD card.
5. Flash it and thats it.
6. If you want Google apps (gapps) you will have to download a suitable gapps package for your device and new rom. If your new rom is android 9 pie then download arm gapps, android version 9 and I would recommend the lighter gapps package like nano or pico.
7. Flash gapps right after flashing your rom.
8. Optional wipe dalvik and cache just in case and thats it
Click to expand...
Click to collapse
thank you so much you are the best ??
So I'm trying to get Magisk installed on my bootloader/OEM Unlocked S10+ (SM-G975F beyond2lte) device.
I can do that fine by downloading the latest official firmware for my device, installing that (BL/AP/CP/CSC) through Odin v3.14.
That installs fine.
Then I sideload Magisk v23.0, and the AP file I just flashed via Odin over adb via push.
I install Magisk, recovery-patch the AP file, usd adb to pull the file back over onto my desktop. I restart the phone in download mode and once again populate Odin with the BL/AP/CP/CSC files, but this time the AP file is the one I got from Magisk.
Start that, let Odin restart my phone whilst I'm holding Bixby/Power-Up/Power, I release those three once the bootloader warning message comes up.
I set the phone up like normal, but there's the issue - my 128GB device only reads as having 32GB - I can setup Magisk fine, it asks me to download an extra bit, then auto-restarts the phone after 5 seconds.
Yay, I have root! Boo, I'm missing 96GB of free space...
I've read that installing TWRP can help fix this, fair enough, I try to install TWRP (I've tried through both the "dd" method via adb shell, and patching the twrp 3.5.2_9-3 via Magisk, and installing with vbmeta over Odin), but that then eliminates Magisk.
I've been trying this now for days, literally days, reading through different forum posts, detailing my steps to myself in notepad++ step-by-step so I can see what it is I'm doing.
I'm left with zero clue what to do now except reach out and hope for some help from this forum.
Should have known... Now that I've posted on XDA it's fixed... In-case anybody else is having trouble here are the steps I've written down for myself.
Phone is S10+ SM-G975F (beyond2lte) - Bootloader / OEM Unlock is already unlocked.
******************************************************************
FLASHING STOCK ROM (ALWAYS GOOD PLACE TO START):
******************************************************************
1. Phone into Download mode (Vol Down + Bixby button, insert USB (Don't use power button))
2. Odin, AP in AP, BL in BL, CP in CP, CSC in CSC (NOT the HOME one). USERDATA stays EMPTY!
3. Phone may restart/erase several times, in the end inbuilt recovery will turn up. Use this to factory reset.
4. Wait for it to continue like normal after factory reset.
5. Setup INCLUDING with WiFi. WiFi REQUIRED. No need to add your account
6. Make sure OEM Unlock is still checked.
*************************************************************************************************
ROOT INSTRUCTIONS: https://www.thecustomdroid.com/samsung-galaxy-s10-root-guide/
*************************************************************************************************
1. Use adb push to shunt over Magisk Manager (download latest one), and the "AP" file
2. Install Magisk Manager
3. Open, select install, make sure "Recovery" is ticked, next, select "Select and Patch a File"
4. Select the AP file, then click "Let's Go"
5. Use adb pull, as the MTP file transfer ****s up the large patched files Thanks Microsoft!
6. (adb reboot bootloader) Restart phone in Download mode
7. Open Odin, & flash the patched Magisk AP file in AP, BL in BL, CP in CP, CSC (NOT the HOME one) in CSC.
8. Let device reboot while holding POWER, BIXBY, and VOL UP, and release all 3 buttons on bootloader warning screen.
a. NOTE: If you end up with a bootloop, hold POWER, BIXBY, VOL UP until you enter the built-in recovery menu, and do a factory reset.
9. Set device up like normal, remember to enable the WiFi
a. Check device internal storage, should be XXX out of 128GB (Or whatever you have)
10. Search installed apps for the Magisk one, it won't have a proper icon to begin with
11. Open it, and continue the setup as it instructs. It’ll reboot the phone.
12. Device is now rooted.
********************************************************************************************
TWRP INSTRUCTIONS: https://www.thecustomdroid.com/samsung-galaxy-s10-twrp-magisk-root-guide/
********************************************************************************************
Phone must be rooted for this to work!
1. Copy the un-magisked file "twrp-3.5.2_9-3-beyond2lte.img" onto phone
2. Open Magisk, select install, make sure "Recovery" is ticked, next, select "Select and Patch a File"
3. Patch the "twrp-3.5.2_9-3-beyond2lte.img" file
4. Copy that patched file onto your PC, and rename it magisk_patched.img
5. Open powershell in same folder, and type
a. mv magisk_patched.img recovery.imgb. tar cf twrp-beyond2lte.img.tar recovery.img
6. Enter into Bootloader mode
7. Load up Odin, untick auto-reboot, and put the magisk-patched TWRP.tar file in AP
8. Press PWR and VOL-DOWN to exit Download Mode, as soon as screen goes black, switch to PWR, BXBE, VOL-UP, release PWR & BXBE when you see bootloader warning, keep VOL UP
9. In TWRP, swipe to allow modifications
10. Flash multidisabler-samsung.zip
11. Go to wipe - format data - yes, after go back to TWRP home screen
12. Click Reboot > Recovery (NOT SYSTEM), you now have a TWRP enabled device.
13. Reinstall Magisk, and check root status, it should ask you to do the whole re-download/5 second reboot thing because you did the wipe > yes thing in TWRP.
UPDATE: After restarting my phone I lost root (Magisk was still installed, but it didn't have an "installed" version listed). To get past this I...
*************************************************************************************************************************
Magisk reinstallation via TWRP:
[ROM][Signature Spoofing]LineageOS 18.1 for S10E/S10/S10+ Exynos
oHello my friends, please someone could make a video to activate root? I can't even do it with the key combinations... Please help me I can't get into the bank apps :(
forum.xda-developers.com
*************************************************************************************************************************
1. Copy the "beyond2lte-boot-magisk.img" onto phone (see URL above)
2. Run Magisk, patch the "beyond2lte-boot-magisk.img" file, then copy it over onto your MicroSD (I just find it easier)
3. Boot into TWRP > Install > Install Image button (Bottom Right)
a. If TWRP has vanished, follow steps above to get it back
4. Flash the patched file to "Boot"
5. Go to TWRP Home screen > Reboot into Recovery (not into System)
6. Check Magisk Manager should have Root again (Don't update Magisk via app though, or you’ll bollocks the whole thing up, and have to start all over from the start.)