Database Users

Stuck at boot screen after restoring ány Nandroid backup.

Hey,
I've had this problem for ages now, and always gave up on my data, but now I really want to fix this for good.
Yesterday I was ready to update my CM12 nightly to the lastest version (didn't see it was actually CM13), and did a backup in cwm before the update. The backup succeeded, but it gave the message that .android_secure couldn't be found and it didn't back that up. It always gives me this message after a backup and after google searching, it seems to me that it doesn't matter.
After installing the update, I noticed it was CM13, and my gapps wasn't updated to the marshmellow stock, as expected, so errors occured all the time.
I didn't want to upgrade to CM13 just yet, so I decided to restore my backup.
As always, the restore process goes without errors, but upon reboot I'm stuck at the CM logo. I can wait untill the battery is dead or ignites from the heat, but nothing happens. This has also happened to me every time I make a backup. I've watched about every video on youtube on how to do a proper backup and how to restore one, so I'm confident that I did it right.
For some reason, any backup I make, no matter what android version (didn't work with stock kitkat, either, before I switched to CM12) it never works and I'm forced to do a clean install and start over again.
I've tried to do partial restores from the backup file, and if I only restore the data partition (and wipe dalvik) It does boot, but gives me non stop errors that apps are crashing.
I've tried to do a dirty flash to no avail, always endless error messages.
When I do a clean install and check the MK5 of the backup with nandroid manager it gives no errors.
Is there anything wrong with my phone or something? I'm not making backups to be unable to restore them.
Can anyone help me out with this?
(I have a i9505)

Try a different recovery. CWM is outdated. TWRP is nice. Worked for ne every time. There are TWRP flashable zips so you won't have to mess around with Odin.

GDReaper said:
Try a different recovery. CWM is outdated. TWRP is nice. Worked for ne every time. There are TWRP flashable zips so you won't have to mess around with Odin.
Click to expand...
Click to collapse
Won't changing recovery make my old backups useless? I'm all for changing to TWRP, but first I'd love to restore my CWM backup...

Yes it will. Unfortunately I don't know what to suggest. Haven't used CWM since I switched to the S4.

Help with TWRP Restore !

I just got a s5. And I got it succesfully rooted and also got TWRP working on it.
All the data from my previous phone was transfered to the s5.
Now I made some backups with TWRP with the default settings: Partitions boot, system and data.
With the backups in mind I was thinking I could easily restore it to a previous state.
Thinking I backed up all the data and wanted to make it fresh again, I wanted to restore it.
In the menu I chose the restore option with the same settings as the backup: Partitions boot, system and data.
And it gives a message restoring system succesfull.
But when rebooting, it keeps hanging and at the moment of loading the android system every bit of the system keeps 'hanging'
It keeps saying
'Unfortunately touchwiz startup unsuccesfully'
'Unfortunately youtube startup unsuccesfully'
'Unfortunately greenify startup unsuccesfully'
'Unfortunately app whatever startup unsuccesfully'
And so on and so on
Eventually it starts with a black screen with nothing loaded. Complete blackout.
So this backup doesn't work. And I try my second backup.
Unfortunately also the second backup gave these errors.
And also the third backup!
So the backup files seem the right size, it's some gigabytes, and it alway's keeps saying backup/restore succesfully.
But now it fails to restore and boot the backup
The things I tried.
-Trying three different backups
-Wiping cleaning data/dalvik/cache etc etc
-Restoring a part of the backup. First system, then data, then boot, no succes.
So i'm totally lost! Does somebody know how to fix this? Or have some tips to try??

You can't restore system and boot from a different model phone
That would be like trying to flash a ROM for one model phone to another without porting it
If it was an S5 you backed up, was it the exact same model (ie: G900F etc?)
Flash back to stock, then try restoring only DATA
Or use TiBu to restore your apps from the TWRP backup

*Detection* said:
You can't restore system and boot from a different model phone
That would be like trying to flash a ROM for one model phone to another without porting it
If it was an S5 you backed up, was it the exact same model (ie: G900F etc?)
Flash back to stock, then try restoring only DATA
Or use TiBu to restore your apps from the TWRP backup
Click to expand...
Click to collapse
Thanks for the reply! It was a backup and restore on the same phone. So that is why I thought it was supposed to be a easy restore.
But I found the solution hidden somewhere in one message on XDA:
"Originally Posted by Dr. Fed
Would you happen to know why, when restoring a TW 4.4.2 nandroid using TWRP 2.8.1 or 2.8.4, after running an AOSP lollipop ROM like CM12, the TW ROM boots but then the whole system force-closes? Before restoring the nandroid, I advance wipe system, data, cache, and dalvik. Then I restore the nandroid. It boots, but then some daemon crashes. Then all processes and apps. The screen goes black after a few crashes.
So, what I do is pull out the battery, boot into recovery, advance wipe system, data, cache, dalvik, flash a CM11 ROM, reboot. I let CM11 start up, skip the set-up, then I boot back to TWRP (2.8.1 and now 2.8.4), advanced wipe, restore TW nandroid, and now it works just fine.
It seems like TWRP doesn't fully wipe."

Here the steps for if other people will run into the same problem:
Problem: Android 5 is running, with twrp 2.7 performed a back up = Restoring the backup is difficult because it problably doesn't do a clean wipe somehow.
1. I downloaded a cyanogen 11 rom, a Android 4 version.
2. Installed it with TWRP. Somehow it 'wipes' it more efficiently.
3. From cyanogen 11 back to booting TWRP.
4. In TWRP trying the Android 5 restore.
And Amazingly this worked!! = Celebrate!!

chokolademan said:
Thanks for the reply! It was a backup and restore on the same phone.
Click to expand...
Click to collapse
Confused me with this line
chokolademan said:
All the data from my previous phone was transfered to the s5.
Click to expand...
Click to collapse
Good to see you solved it

Failed installing Lineage 14.1, wiped system, now restoring stock won't boot

Attempt 1 to install Lineage
Tried installing the Lineage 14.1, it kept doing a blank-but-illuminated screen, then turned off and back on, resulting in a boot loop.
We tried a couple of things - first the more conservative wiping of just data, dalvik and cache.
This did the boot loop described above. I then restored the stock backup and all was well.
Attempt 2 to install Lineage
The second time we wiped the system partition in addition to the above. Same bootloop.
Went to restore the backup of stock again, but now it's getting stuck at "I'm not a phone I'm a comprehensive yada yada" screen. It never progresses past this.
Attempts to get Stock Restore working
We've tried restoring just the system, data and dalvik
We've also tried System Image in addition to these.
No joy.
We don't have a laptop or other device to hand for a few days so we have just what's on the phone - the Lineage 14.1 zip, the stock backup and TWRP.
Any ideas how we can get back to a working phone with either OS?

What type of LePro3 do you have?
X720,X722,X727?

It's the X722

kenbw2 said:
It's the X722
Click to expand...
Click to collapse
The X722 model is not supported by Lineage.
I think that you have a problem. Hope anyone can help you to go back to stock successfully.

When doing the stock restore, we didn't restore the boot image.
Is that something worth trying?

kenbw2 said:
When doing the stock restore, we didn't restore the boot image.
Is that something worth trying?
Click to expand...
Click to collapse
Yes, you could try it. Please, write, was it useful or not)

Success!
Restored System,. System Image, Cache, Data and Boot partitions and all is now back to normal.
Phew!

kenbw2 said:
Success!
Restored System,. System Image, Cache, Data and Boot partitions and all is now back to normal.
Phew!
Click to expand...
Click to collapse
That is great. So, is bluetooth works fine after that?

twrp restored Samsung stock ROM backup won't boot

Hi,
I've flashed TWRP for a sm-G900f via heimdall, booted into TWRP-Recovery, made an backup from the working Stock ROM to sd card, flashed lineage open gapps etc., all works well.
Because of somtimes not working Sensors I've tried to test if the sensor problem is an hardware or an software issue, so recovered the stock rom backup using the installed twrp 3.2.1-0. Therefor I've made these steps :
Boot into recovery
Wipe cache, system, davlink-cache, format data
restore the stock rom backup
reboot
Every reboot results in booting to recovery, Samsung system won't start.
Tried to disconnect battery for a few minutes etc.
Where is my mistake ? Could someone give me an advice ?
Every restore of the lineage backups using this way works well.
Regards
Fred

fred06007 said:
Hi,
I've flashed TWRP for a sm-G900f via heimdall, booted into TWRP-Recovery, made an backup from the working Stock ROM to sd card, flashed lineage open gapps etc., all works well.
Because of somtimes not working Sensors I've tried to test if the sensor problem is an hardware or an software issue, so recovered the stock rom backup using the installed twrp 3.2.1-0. Therefor I've made these steps :
Boot into recovery
Wipe cache, system, davlink-cache, format data
restore the stock rom backup
reboot
Every reboot results in booting to recovery, Samsung system won't start.
Tried to disconnect battery for a few minutes etc.
Where is my mistake ? Could someone give me an advice ?
Every restore of the lineage backups using this way works well.
Regards
Fred
Click to expand...
Click to collapse
Corrupted backup maybe?
A long time ago I made a backup of stock and was able to go back and forth with no issues. You can try and go back to stock, root again and try another back up.

Corrupted backup ? It's the only one I've made after flashing TWRP and before installing Lineage.

fred06007 said:
Corrupted backup ? It's the only one I've made after flashing TWRP and before installing Lineage.
Click to expand...
Click to collapse
It happens sometimes, I had an SD card with a bad sector so every time I would make a back up it would get corrupted if I deleted the back up. I ended up leaving the backup so it will no longer write on the bad sectors.

fred06007 said:
Where is my mistake ? Could someone give me an advice ?
Click to expand...
Click to collapse
I think, you have to flash or restore the right kernel.
Which partitions have you backed up?

Sorry for the late response, the backup includes in my mind system, data and boot partition because the backup consit's of the following files:
boot.emmc.win
boot.emmc.win.sha2
data.ext4.win
data.ext4.win.sha2
data.info
recovery.log
system.ext4.win000
system.ext4.win000.sha2
system.ext4.win001
system.ext4.win001.sha2
system.info

help about /vendor

im having big problems about vendor. for start im giving some info:
device: mi a1 (tissot)
current os: lineage OS 17.1
root: yes
twrp: can install or use just booting .img
i unlocked my device and installed twrp. there is no problem.
i wanted flash lineage OS and i wiped my device. gives error about cannot mount /vendor
i installed treble supported twrp and installed lineage OS. flashed magisk. installed microg...
then i tried flash mapsv1.zip which is recommended for microg. then booom. another /vendor error.
now i can boot device. i can use everything except gps. google maps app cannot found location. yandex maps can found and i can use it until lock screen or going main screen (or another app). then it starts stopping everytime until i clen its data and cache. then again... in chrome when i open google maps and try found my location chrome stops.
i tried to change /vendor/etc/gps.conf. its still same.
what to do now guys? im worrying about if i try re-flash rom it doesnt flash and device bricked. any solution without re-flash rom? what causes to cannot mount /vendor after solved it?

What exactly did you wipe? I think you wiped vendor, or bumped your O.S. from an old firmware. However, wiping system, data and Dalvik was more than enough.
To solve this, the worst thing to do is trying to hook around. Just reflash the latest original firmware and start again.
Keep in mind that you might need to backup your stuff first.
Use adb pull and push commands in case your device is rebooting too much. Check if device works well this time.
Next, open adb access from device and reboot fastboot to reflash your custom recovery, then reboot recovery and wipe just these items. Finally, complete Rom flashing procedure, depending of your needs.

KaaMyA said:
What exactly did you wipe? I think you wiped vendor, or bumped your O.S. from an old firmware. However, wiping system, data and Dalvik was more than enough.
To solve this, the worst thing to do is trying to hook around. Just reflash the latest original firmware and start again.
Keep in mind that you might need to backup your stuff first.
Use adb pull and push commands in case your device is rebooting too much. Check if device works well this time.
Next, open adb access from device and reboot fastboot to reflash your custom recovery, then reboot recovery and wipe just these items. Finally, complete Rom flashing procedure, depending of your needs.
Click to expand...
Click to collapse
Dalvik cache , system, data, and cache. My device is not rebooting too much. Sory if i couldn't explain. Everything working fine except when an app tries use my location, app stops running, i cant flash anything right now.
İ thought anyone knows mapsv1.zip file(microg.org) and which files are replaced or added by this file when flash it. And can i do it manually? Btw i can read and write /vendor file with solid explorer
İf needed to re-flash rom thats ok but i think lineage OS was perfect for me until this error. And a last thing: can i backup my settings. (İ already took backup of everything in stock when unlocked bl)
Thank you for help
Edit: gps problems started when i tried flash mapsv1

ROM could be perfect, but what I doubt is how perfectly you followed the procedure. Again, better start from zero, being sure you have all the prerequisites (latest firmware included). My humble opinion.

KaaMyA said:
ROM could be perfect, but what I doubt is how perfectly you followed the procedure. Again, better start from zero, being sure you have all the prerequisites (latest firmware included). My humble opinion.
Click to expand...
Click to collapse
Okey ilk try it and share the result night. But is it possible to backup settings of phone?

Well, that's why in step 0 is always recommended to backup you phone. At this level you should have nothing in settings, since you wipe it all... However, that's better, that's the goal of a Clean Install after all. Each ROM has its own flavour and is not recomendable to overwrite these values from a backup, if you're changing ROMs. What you could do, was to backup your apps and some settings with a third app like Swift Backup, or older Titanium Backup, before starting it all, or else, making a complete backup from recovery, in case you end with a problem with newly installed ROM (recommendation here is disable any screen security lock before doing Backups).

KaaMyA said:
Well, that's why in step 0 is always recommended to backup you phone. At this level you should have nothing in settings, since you wipe it all... However, that's better, that's the goal of a Clean Install after all. Each ROM has its own flavour and is not recomendable to overwrite these values from a backup, if you're changing ROMs. What you could do, was to backup your apps and some settings with a third app like Swift Backup, or older Titanium Backup, before starting it all, or else, making a complete backup from recovery, in case you end with a problem with newly installed ROM (recommendation here is disable any screen security lock before doing Backups).
Click to expand...
Click to collapse
İ did it all. Step by step. But i realized something. That errors doesnt matter on my device. Bcs when i flashing stock mi flash tool said failed but i booted system and everything working fine. İ installed persistent twrp. Same error. Then wiped. Same error but wipe completed. Than i flashed this zips single and booted everytime: lineage os, magisk, backup of migrate. Everytime it said cannot mount vendor but all of this apps and os and recovery working fine
Thank you for your helps
[Helping alone ]

Nurullah44 said:
İ did it all. Step by step. But i realized something. That errors doesnt matter on my device. Bcs when i flashing stock mi flash tool said failed but i booted system and everything working fine. İ installed persistent twrp. Same error. Then wiped. Same error but wipe completed. Than i flashed this zips single and booted everytime: lineage os, magisk, backup of migrate. Everytime it said cannot mount vendor but all of this apps and os and recovery working fine
Thank you for your helps
[Helping alone ]
Click to expand...
Click to collapse
if you didn't treblized your device then its not a problem. I have this error too but that's because there is no vendor partition to mount. as been said by unipo:
https://forum.xda-developers.com/mi...-3-3-1-0-tissot-manager-t3976117/post81326153

portox said:
if you didn't treblized your device then its not a problem. I have this error too but that's because there is no vendor partition to mount. as been said by unipo:
https://forum.xda-developers.com/mi...-3-3-1-0-tissot-manager-t3976117/post81326153
Click to expand...
Click to collapse
Are you sure? Bcs i can view and change /vendor in root path. Treblizing is updating and repairing system partitions right? İ am using treble support twrp, flashed stock rom via mi flash(said error but worked fine) then how to treblize a device? And is this required for anything(like a rom, an app)?