Hello guys,
Sorry for my bad English
My phone just turned off even if the battery is almost full. When I turned it on its stuck in a boot loop. Sometimes it's goes to a screen where it would say process not responding. It's still on the stock ROM and recovery. I didn't try to root it or flash anything on it.
I tried some troubleshooting like flashing the firmware from the Asus website but it didn't work. Please help
Have you try flashing from Micro SD card in stock recovery?
M Huzaifah said:
Have you try flashing from Micro SD card in stock recovery?
Click to expand...
Click to collapse
Thank you for the reply bro. I already did and it's still not working.
To reset the phone in cases like this, one could also use fastboot.
Boot in fastboot mode by pressing VolumeUp button while switching on the phone, then connect the phone to a PC with a usb cable (you must have fastboot/adb drivers installed). You can now open a command prompt and use the commands:
Code:
fastboot erase cache
fastboot erase userdata
fastboot erase system
The second command erase all the user's data on the phone.
The last command erases the operating system and you must install the full firmware in zip format from the recovery afterward (with a microSD card or with a PC via ADB sideload).
you can install custom recovery?
I had a boot loop issue too. I could solve it by entering fastboot and trying using the defaut roms boot.img through fastboot. You can extract the boot.img from any firmware image file from the Asus site.
Code:
fastboot boot boot.img
BubuXP said:
To reset the phone in cases like this, one could also use fastboot.
Boot in fastboot mode by pressing VolumeUp button while switching on the phone, then connect the phone to a PC with a usb cable (you must have fastboot/adb drivers installed). You can now open a command prompt and use the commands:
Code:
fastboot erase cache
fastboot erase userdata
fastboot erase system
The second command erase all the user's data on the phone.
The last command erases the operating system and you must install the full firmware in zip format from the recovery afterward (with a microSD card or with a PC via ADB sideload).
Click to expand...
Click to collapse
After these commands, had to do a wipe data/factory reset prior to update from sd card (adb sideload not work at alll).
but no luck, keep boot looping...
---------- Post added at 11:26 PM ---------- Previous post was at 11:23 PM ----------
sofamensch said:
I had a boot loop issue too. I could solve it by entering fastboot and trying using the defaut roms boot.img through fastboot. You can extract the boot.img from any firmware image file from the Asus site.
Code:
fastboot boot boot.img
Click to expand...
Click to collapse
this command result error:
downloading 'boot.img'...
OKAY [ 0.796s]
booting...
FAILED (remote: unlock device to use this command)
finished. total time: 0.802s
used this instead: fastboot flash boot boot.img (with boot.img extracted from firmware)
target reported max download size of 268435456 bytes
sending 'boot' (24547 KB)...
OKAY [ 0.813s]
writing 'boot'...
OKAY [ 0.733s]
finished. total time: 1.550s
but my case is serious, giving up
maybe you should unlock the bootloader before trying those commands
why don't u try, adb sideload option once, give it a try
i dont know what firmware my dads ze550kl is...
and it is bootlooping continously....
what is best files to flash via recovery update from sd card method?
i want to save my dads internal memory
Try this:
fastboot boot recovery.img
Click to expand...
Click to collapse
This may result an error if you don't flash the right file,it depends on your firmware version. I have a file that works on lolipop (twrp.).
I had the same issue, as my device was on warranty period i took it to the service centre and they said the mother board is damaged
Im facing the same problem I installed a new ROM from SD card and it was successfully done but the phone is still stuck in boot loop and unfortunately my USB debugging is disabled my bootloader is locked and my phone is not rooted and it's in stock recovery can anyone please help me
BubuXP said:
To reset the phone in cases like this, one could also use fastboot.
Boot in fastboot mode by pressing VolumeUp button while switching on the phone, then connect the phone to a PC with a usb cable (you must have fastboot/adb drivers installed). You can now open a command prompt and use the commands:
Code:
fastboot erase cache
fastboot erase userdata
fastboot erase system
The second command erase all the user's data on the phone.
The last command erases the operating system and you must install the full firmware in zip format from the recovery afterward (with a microSD card or with a PC via ADB sideload).
Click to expand...
Click to collapse
heyy, even i deleted recovery by using
fastboot erase recovery
then, after that my phone stucked on fastboot mode..
and when i flash the recovery , it finished propery but there is nothing happen in my phone still stucked into fastboot mode..
when i press power+volume(-) only fastboot mode is opened..
what to do now??
how to reinstall bootloader (recovery or twrp)??
plz help guyzz//:crying::crying:
I face the same bootloop problem with my mother's cellphone. The bootloader is locked and USB debug is disabled.
I tried to flash stock img via adb sideload, and although it succeed, after factory reset in Recovery (and pull battery several time) I could finally get into the "setup wizard" of Android system.
However, the system will go into bootloop again when the wizard goes to "wifi" setup. The phone will not go into setup wizard again unless I do a factory reset (and battery pull) again...
It seems there are some hardware failure at Wifi component (Since I already erase all \data, \cache), and this failure caused reboot of the system...
Any idea?
mayankarya837 said:
heyy, even i deleted recovery by using
fastboot erase recovery
then, after that my phone stucked on fastboot mode..
and when i flash the recovery , it finished propery but there is nothing happen in my phone still stucked into fastboot mode..
when i press power+volume(-) only fastboot mode is opened..
what to do now??
how to reinstall bootloader (recovery or twrp)??
plz help guyzz//:crying::crying:
Click to expand...
Click to collapse
hey did u finnd any solution for this>???
Related
I have read the guide and searched for 5 hours and still can't find an answer.
I have a windows 7 computer with the SDK and all drivers installed properly and have both the factory images downloaded from Google. The extracted factory image has been placed in my SDK folder platform-tools. I have been trying to flash the bootloader via fastboot commands. The computer recognizes the nexus 7 and gives me the proper serial number when I do "fastboot devices". I then run through all the commands in the "Guide flashing a factory image", fastboot erase boot, fastboot erase cache, fastboot erase recovery, fastboot erase system, fastboot erase userdata and see that all the commands finish. When I get to fastboot flash bootloader bootloader-grouper-4.13.img the command prompt just hangs and does nothing. In the upper left corner of the Nexus 7 I see signature match but the command line reads sending 'bootloader' <2096 KB>...
OKAY [ 0.265s]
writing 'bootloader'....
I am lost as to what to do. Should I try the command fastboot reboot-bootloader even though I may not have properly flashed the bootloader.img????
Thanks for any help, I have been playing with this since yesterday.
Why did you erase cache, system, recovery etc? Weren't you just updating your hboot?
Usualy not wise to loose power while updating firmware, but if you've been at it for a day you soon will as I don't believe you can charge through bootloader mode.
When flashing through fastboot the update won't take effect until you reboot, if its hung for a while (I mean a real long while as this may not be safe) why not unplug usb, replug, then fastboot flash a recovery quick.
Now get a new download of whatever spl you can find with md5sums. Download and make sure the md5 matches
Now flash that hboot and see what happens
Sent from my HTC Vision using xda premium
I read a lot about problems with that 4.xx bootloader.
Try flashing one of the 3.xx bootloaders from 4.1.x factory images.
Nexus 7 was rooted,unlocked bootloader and was running paranoid anroid 3.90+ i think . i plugged it into the computer to get a new rom using nexus root toolkit v1.7.2. i was asked to update a few things, so i clicked yes. i then tried to flash stock + unroot and chose 4.3 cause i wanted to try the new OS. but i guess something happened because when i turned my nexus 7 back on i was stuck on the load screen (GOOGLE image with a unlocked lock) i could cycle thru a few options using volume keys (start,recovery,power off) .all of them seemed useless as they would just bring me back to where i was.when clicking start "booting failed" come up on the upper left side. when trying to flash stock +unroot using NRT i get up to the sending "bootloader" part and my nexus 7 just freezes, how do i fix this. please and thanks
download the factory image from the google factory image and extract the archive.
try flashing the bootloader manualy with fastboot.
locate your fastboot binary and copy the bootloader image to that directory.
open a commandline in that directory and type
fastboot flash bootloader name-of-bootloader.img
after that you can try to flash the whole factory image with the flash-all.sh script.
Simple
dieselmonkeyy said:
i could cycle thru a few options using volume keys (start,recovery,power off) .all of them seemed useless as they would just bring me back to where i was.when clicking start "booting failed" come up on the upper left side.
Click to expand...
Click to collapse
Boot failed??? That's a bad flash of the stock ROM. I had the same problem at my first attempt trying to flash Stock ROM, but don't worry! Let's do this:
WARNING: Before you continue you are accepting that I'm not responsible of anything can happen to your Nexus and your battery is fully charged.
When you download the stock ROM you have to uncompress the zip file. You will find the bootloader and another zip.
Uncompress that zip file, put fastboot program, the bootloader and the files together.
Then start your Nexus into bootloader mode, connect it to your PC, open a console (cmd for Windows, Terminal for Linux and Mac OS X) and type this:
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
WARNING: Your Nexus is FULLY EMPTY!!! Don't reboot it because it can get a full brick (It will not turn on any more).
Now type this:
fastboot flash bootloader bootloader-grouper-X.XX.img
NOTE: Replace X.XX with your version.
Now type:
fastboot reboot-bootloader
Your Nexus will reboot.
Type this:
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fastboot flash system system.img #Will take a very long time. DON'T INTERRUPT THE PROCESS!!!!!
fastboot flash userdata userdata.img
Now reboot again with:
fastboot reboot-bootloader
Re-unlock bootloader to get a full wipe:
fastboot oem lock
Reboot again:
fastboot reboot-bootloader
And then unlock the bootloader:
fastboot oem unlock
Press "Yes" to the petition screen and reboot:
fastboot reboot
Ready the Nexus!
I had the same problem and I did this.
I hope I can help you.
Sorry for my bad English. I'm from Argentina and I'm learning.
Well,
Good luck!
MlucianoEze said:
Boot failed??? That's a bad flash of the stock ROM. I had the same problem at my first attempt trying to flash Stock ROM, but don't worry! Let's do this:
WARNING: Before you continue you are accepting that I'm not responsible of anything can happen to your Nexus and your battery is fully charged.
When you download the stock ROM you have to uncompress the zip file. You will find the bootloader and another zip.
Uncompress that zip file, put fastboot program, the bootloader and the files together.
Then start your Nexus into bootloader mode, connect it to your PC, open a console (cmd for Windows, Terminal for Linux and Mac OS X) and type this:
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
WARNING: Your Nexus is FULLY EMPTY!!! Don't reboot it because it can get a full brick (It will not turn on any more).
Now type this:
fastboot flash bootloader bootloader-grouper-X.XX.img
NOTE: Replace X.XX with your version.
Now type:
fastboot reboot-bootloader
Your Nexus will reboot.
Type this:
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fastboot flash system system.img #Will take a very long time. DON'T INTERRUPT THE PROCESS!!!!!
fastboot flash userdata userdata.img
Now reboot again with:
fastboot reboot-bootloader
Re-unlock bootloader to get a full wipe:
fastboot oem lock
Reboot again:
fastboot reboot-bootloader
And then unlock the bootloader:
fastboot oem unlock
Press "Yes" to the petition screen and reboot:
fastboot reboot
Ready the Nexus!
I had the same problem and I did this.
I hope I can help you.
Sorry for my bad English. I'm from Argentina and I'm learning.
Well,
Good luck!
Click to expand...
Click to collapse
what do i type into cmd inorder to be able to type
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
and get it to work. im a noob . thanks in advance
You have to be in the folder with fastboot inside else those commands will not work.
It will be easier if you put the images extracted from the zip into the zip together with the fastboot program.
If you don't understand yet I'll try to be more specific.
Sent from my Nexus 7 using xda app-developers app
dieselmonkeyy said:
what do i type into cmd inorder to be able to type
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
and get it to work. im a noob . thanks in advance
Click to expand...
Click to collapse
It can be intimidating... and the so-called tool-kits don't help you learn
I assume you are using Windows.
follow the unzip instructions from the previous poster. (not quoted here). note the directory.
find the directory containing your android tools... ADB.exe and FASTBOOT.exe.
transfer your unzipped files to this directory. Open your CMD prompt window and change to this directory if necessary.
plug in your Nexus.
type fastboot device at the prompt. MAKE SURE YOUR NEXUS 7 is listed (serial number)
proceed with the complete instructions from the previous poster.
that should do it.
YES!!!
thanks alot for the instructions, it worked!!! i hope people use ur instructions as reference if they have the same problem. THANKS ALOT!!!
dieselmonkeyy said:
thanks alot for the instructions, it worked!!! i hope people use ur instructions as reference if they have the same problem. THANKS ALOT!!!
Click to expand...
Click to collapse
I'm glad the problem is solved. Do not forget to click the THANKS button.
Sent from my Nexus 7 using xda app-developers app
Hello. My brother's Nex 7 is also has this issue. I cannot follow any of the steps as it gets stuck on erasing any of the partitions. I tried erasing those partitions in any order and they still get stuck. His device was stock and bootloader locked too. When I try to unlock the bootloader, it gets stuck as well at the erasing userdata part. I suspect a bad memory chip. Anyone else experience this?
Yes, mine is sticking on the (bootloader) erasing userdata on bootloader unlock as well.
It also sticks on any fastboot ERASE command.
Factory reset had a bunch of errors and no longer comes up. none of the FLASH commands work because the BOOTLOADER is locked.
And since it freezes on the unlocking bootloader commands I believe I am screwed.
This was a factory installed, never flashed, unlocked or rooted Nexus 7 wifi 2nd gen. After installing the 4.4.2 that popped up it loaded once then crashed and never loaded again
I have tried every tool I can find. They all stick on the erase part.
jophisdrazin said:
Yes, mine is sticking on the (bootloader) erasing userdata on bootloader unlock as well.
It also sticks on any fastboot ERASE command.
Factory reset had a bunch of errors and no longer comes up. none of the FLASH commands work because the BOOTLOADER is locked.
And since it freezes on the unlocking bootloader commands I believe I am screwed.
This was a factory installed, never flashed, unlocked or rooted Nexus 7 wifi 2nd gen. After installing the 4.4.2 that popped up it loaded once then crashed and never loaded again
I have tried every tool I can find. They all stick on the erase part.
Click to expand...
Click to collapse
Send your device for repair. My brother did so. My suspicions were correct. A faulty chip. They replaced the whole board, according to my brother.
Sent from my Nexus 7 using Tapatalk
i did all ok for some weeks. But one day phone was discharged and after charge i got a black screen. Sometimes it flashes a bit depending on the boot and i can get some sound if i push volume down or up.
i tried fastboot or adb but no devices. (how can i force connection?). I went to the huawei shop they somehow restarted it and i could the the different booting option but they reboot it and they told me they couldn t do anything about because of the rom. I asked to redo what they have done and leave it to the reboot option so i could probably manage it from this point, but they told me it was not possible. So back home i tried everything but no success. How do i force the reboot from my computer with which softs?
tks
update
i do
adb devices
List of devices attached
GGXDU1721001169 recovery
if i do adb reboot-bootloader
i still have black screen
and fastboot devices gives
no permissions f astboot
how can i grant permission?
what command should i use? i tried a recovery but didn t work either think i t is an permission issue
tks
update
so i did
$ sudo fastboot devices
[sudo] password for xxxx:
GGXDU1721001169 fastboot
[email protected] ~ $ cd Downloads
[email protected] ~/Downloads $ sudo fastboot devices
GGXDU17210001169 fastboot
[email protected] ~/Downloads $ sudo fastboot flash recovery recovery.img
target reported max download size of 532676608 bytes
sending 'recovery' (34228 KB)...
OKAY [ 0.848s]
writing 'recovery'...
OKAY [ 0.785s]
finished. total time
[email protected] ~/Downloads $ sudo fastboot reboot
rebooting...
finished. total time: 0.053s
and still black screen?????
is it hardware issue?
is it possible somehow to reinstall a rom but usting the computer?
yes you can like you have flashed recovery, do the same thing with boot.img and system.img
extract them with update extracter from the full rom
Same with my CAZ-AL10, I guess it's because of missing drivers(*.so)
zaabolla said:
yes you can like you have flashed recovery, do the same thing with boot.img and system.img
extract them with update extracter from the full rom
Click to expand...
Click to collapse
ｔｋｓ
sorry i m not clear about the method. do i use the same recovery img? from this image i extract the boot ant the system img? and once i use fasboot? same commands?
tks
fastboot flash (system system.img) (boot boot.img)
Yes, extract from the same file you got the recovery from.
if your Nova be supported by fast boot command so it can be fix. don't worry. just find the correct rec , boot , system ...
my Nova l11 bricked like u before , i try many many method ... and help by mod hen.... in 2 day ... done ... everything alrigth ... now i can change 2 rom stock , LOS 14 so easy ....
good luck bro .
do you use image extractor? it seems it only use update image, or do you use another soft to extract it?
tks
Is there a way to wipe or reset TWRP from fast boot. i m also trying to see where the error comes from. how can i see the logs with my computer?
tks
If you want to get rid of twrp then flash stock recovery.img in fastboot.
babysocola1x said:
if your Nova be supported by fast boot command so it can be fix. don't worry. just find the correct rec , boot , system ...
my Nova l11 bricked like u before , i try many many method ... and help by mod hen.... in 2 day ... done ... everything alrigth ... now i can change 2 rom stock , LOS 14 so easy ....
good luck bro .
Click to expand...
Click to collapse
bro my nova l11 bricked update installing stuck at 5% fastboot mode status is phone locked can you please guide me to unbrick my phone?
abuapka said:
bro my nova l11 bricked update installing stuck at 5% fastboot mode status is phone locked can you please guide me to unbrick my phone?
Click to expand...
Click to collapse
1st get unlock code from huawei site for your phone
( need serial number..., find them)
Second, find the appropriate firmware for your model
Third extract update.app with huawei update extractor
Now you will have boot.img, recovery.img and system.img
In fastboot mode unlock the bootloader with your code
Then flash each file with it's fastboot command
i
zaabolla said:
1st get unlock code from huawei site for your phone
( need serial number..., find them)
Second, find the appropriate firmware for your model
Third extract update.app with huawei update extractor
Now you will have boot.img, recovery.img and system.img
In fastboot mode unlock the bootloader with your code
Then flash each file with it's fastboot command
Click to expand...
Click to collapse
where can i use the code? because on fastboot mode there is no option except
phone locked
and second connect hisuit using usb cable etc.
but when i try to connect hisuit with usb phone didnt recognized by hisuit in laptop
one more thing when i connect my phonr with dsta cable on fastboot mode adb devices didnt show any device jyst because i didnt enable usb debugging in developer mode because my phone is new i didnt change anything just try to update using firmware finder app and stuck on 5% cant even start my phone its stuck on bootloop i can go to fastboot mode recovery mode. also try to update using sd card but didnt work kindly guide me
My main rooted v20 phone got bumped and now is stuck in a bootloop. I can enter fastboot (some commands working) but can't access TWRP recovery using either VOL + UP and USB cable or VOL DOWN + POWER. I believe the phone is on 10j or 10k if I remember correctly. Bootloader and carrier are unlocked.
Is there a way to just reflash TWRP safely and attempt data recovery and ROM installation without factory reset?
My goal is to attempt recovery first. If that is not an option, I would like to flash to 10p so I can start the rooting process using Lafsploit.
DirtyBreakz said:
My main rooted v20 phone got bumped and now is stuck in a bootloop. I can enter fastboot (some commands working) but can't access TWRP recovery using either VOL + UP and USB cable or VOL DOWN + POWER. I believe the phone is on 10j or 10k if I remember correctly. Bootloader and carrier are unlocked.
Is there a way to just reflash TWRP safely and attempt data recovery and ROM installation without factory reset?
My goal is to attempt recovery first. If that is not an option, I would like to flash to 10p so I can start the rooting process using Lafsploit.
Click to expand...
Click to collapse
Sure, to flash twrp in fastboot mode you do this.
Download latest twrp
With the phone off hold vol down plug USB into phone and computer.
type on your computer:
fastboot flash recovery twrp-3.6.2_9-0-h918.img
fastbboot reboot
take battery out
put back in
go into twrp by doing a factory reset. How to factory reset the Lgv20
U
Darnrain1 said:
Sure, to flash twrp in fastboot mode you do this.
Download latest twrp
With the phone off hold vol down plug USB into phone and computer.
type on your computer:
fastboot flash recovery twrp-3.6.2_9-0-h918.img
fastbboot reboot
take battery out
put back in
go into twrp by doing a factory reset. How to factory reset the Lgv20
Click to expand...
Click to collapse
Unfortunately no joy. I tried fastboot boot and flash commands and even tried renaming the img file. I tried with 3 different versions of twrp. This was the result:
PS C:\Users\User\NexusTools> fastboot boot twrp-3.6.2_9-0-h918.img
Sending 'boot.img' (24948 KB) OKAY [ 0.771s]
Booting FAILED (remote: 'unknown command')
fastboot: error: Command failed
Click to expand...
Click to collapse
PS C:\Users\User\NexusTools> fastboot flash recovery twrp.img
Sending 'recovery' (23512 KB) OKAY [ 0.854s]
Writing 'recovery' FAILED (remote: 'unknown command')
fastboot: error: Command failed
Click to expand...
Click to collapse
I've searched the forums and internet for hours and not coming up with anything. Any other ideas?
Just a note when trying to cold boot to twrp using 'UP VOLUME + CONNECT USB' that the screen flashes download mode for a split second and then reboots.
DirtyBreakz said:
U
Unfortunately no joy. I tried fastboot boot and flash commands and even tried renaming the img file. I tried with 3 different versions of twrp. This was the result:
I've searched the forums and internet for hours and not coming up with anything. Any other ideas?
Just a note when trying to cold boot to twrp using 'UP VOLUME + CONNECT USB' that the screen flashes download mode for a split second and then reboots.
Click to expand...
Click to collapse
That's so odd I have never seen this issue before.
You can try flashing the twrp image to the boot partition.
fastboot flash boot twrp.img
fastboot reboot
Should boot rite into twrp then because the twrp image is on the boot partition. Sounds to be like there may be a hardware problem with this phone.
Darnrain1 said:
That's so odd I have never seen this issue before.
You can try flashing the twrp image to the boot partition.
fastboot flash boot twrp.img
fastboot reboot
Should boot rite into twrp then because the twrp image is on the boot partition. Sounds to be like there may be a hardware problem with this phone.
Click to expand...
Click to collapse
Well unfortunately the flash boot command failed also. I'm guessing because it shows the boot partition size is 0. Any possible way around this?
I'm hoping not but I think you might be right about a possible hardware issue...
PS C:\Users\User\NexusTools> fastboot flash boot twrp.img
Warning: skip copying boot image avb footer (boot partition size: 0, boot image size: 24076288).
Sending 'boot' (23512 KB) OKAY [ 0.817s]
Writing 'boot' FAILED (remote: 'unknown command')
fastboot: error: Command failed
Click to expand...
Click to collapse
DirtyBreakz said:
Well unfortunately the flash boot command failed also. I'm guessing because it shows the boot partition size is 0. Any possible way around this?
Click to expand...
Click to collapse
I think it's a hardware issue with the ram. I cant think of anything else.
Do a search online for the error message.
Writing 'boot' FAILED (remote: 'unknown command')
Hello, I am trying to flash TWRP to my zenfone, I managed to do it once by some miracle with the exact same setup as I have now.
by typing fastboot devices I get K6AXB7616289*** fastboot
but if I try to flash anything with the phone connected I get no output at all.
If I try to flash with the phone disconnected I get <waiting for any device> and no change when I connect it.
In both of these cases when I disconnect the phone I get:
Sending 'recovery' (31332 KB) FAILED (Write to device failed (No such device))
fastboot: error: Command failed
It is overall wonky and seems to change depending on nothing. Sometimes while writing sudo fastboot reboot bootloader I get to the bootloader as expected, but sometimes I get an error but still manage to get to the bootloader and other times it boots up normally.
I am running ParrotOS from a USB
I also posted in here as my problem is very similar but I hope this post resurrects this particular topic: https://forum.xda-developers.com/t/...but-fastboot-devices-is-working-fine.4295449/
What commands are you using?
Fastboot flash boot boot.img?
The boot.img could be the twrp.img renamed to boot. Img but it should be to recovery I believe.
Fastboot flash recovery twrp.img
Yeah im writing fastboot flash recovery and then the path to my twrp.img. I managed to flash it once after a lot of struggle but now I can't do it again.
After posting I saw that I'm using a USB 3 port and my laptop doesn't have a usb 2 one so I think that might be the issue.
Considering I can get three different outputs from the same command in the span of a couple seconds I think that the problem might be hardware related. I can update once I get my hands on a USB 2 port.
Kaynejulian said:
What commands are you using?
Fastboot flash boot boot.img?
The boot.img could be the twrp.img renamed to boot. Img but it should be to recovery I believe.
Fastboot flash recovery twrp.img
Click to expand...
Click to collapse
I have now tried with a USB 2 port and there is no change.
I have had issue when the phones in fastboot and I'm able to flash via his method. Using platform tools I copy all my IMg's into the folder then open a command prompt window in that folder and fastboot reboot bootloader or fastboot reboot fastboot. Which I learned the hardway is fastbootd mode and then and only then did it actually flash. I also learned the hardway that you boot directly from in fastboot mode or it all just cycles back.
Fastboot reboot.
What version zenfone model and what is system is it running?
If your device is running android 10 or newer then is a different process as you'll need to flash the super.img rather than individual imgs like system vendor product ect
Tue shore image also means it matters where you flash the img
Get a fastboot getvar all printout to me and I'll do what I can to help u get it running again