Database Users

"One Click Root for android"

Hello everyone, yesterday i'm was with my 5.0.2 stock firmware with root and finally got some balls to update it with the "pre-root" method and everything's work's so bad, after install recovery, and did all the wipe's, I went to install the pre-root zip, and comes, crash after crash, finally, I use my PC-Companion to revive my cel phone, but now, it's 5.1.1 with no root (this is totally bad) So, searching in the internet to collect all the methods and try to use the better explanation, i find this video, and this site, I really think it's just a flammer or something like it, but, i prefer try, because i'm afraid to do all again and do the same crashes and again and again and again..
Humm, i'm seeing that i can't post links because i'm newbee here, so, the video is the 1 if we search:
How To Root Sony Xperia Z3 D5803
And the link for the site is in the description, it told to enter in a site, plug the cel phone and click in one button.
Ty guys, i will w8 for some answers.
PS: sorry about my bad english.

For my part I don't use this method because KingRoot has a "malware" (link) from what I read on different forums then it's quite persistent. I advise you to follow the traditional method : link.
Regards.

S6 Edge+ CPU stuck at max 1,8GHz\1,29GHz?

Hi Everyone,
i know there are many very talented, smart guys here on xda (many even smarter then the ones at Sony\LG etc..) so i will try to explain as clearly as possible without becoming boring..
So, with my new S6Edge+
*I CAN (without any problems) : (i obviously have root)
-flash any official firmware i want (C\F\W...etc)
-install any custom ROM i want (through PhilzTouch)
-install any custom kernel i want (through PhilzTouch) -like arter97 and SkyHigh
i know (?) that these install properly(?) because in Settings-About Software -it says exactly the firmware\Kernel\Rom that i installed.
no bootloops for me, no brick...everything fine.
*THE PROBLEM (what i CANNOT DO) even with all this:
-I don't have the NORMAL CPU Frequency! (i get 1,8 instead of 2,1 Ghz for a57 and 1,29 instead of 1.5Ghz for a53).. even with SkyHigh kernel which should even have OVERCLOCK! (synapse says : ''illegalArgumentException: Default value not contained in given values.'') and shows all frequencies only up to 1,8Ghz.
-also the GPU seems crippled (with skyhigh kernel synapse controls go to 700Mhz ,but are not applying, with arter97 kernel they only go to 600mhz )...shouldn't s6 edge plus have 772 Mhz Gpu?
CPU-Z says: Samsung Exynos Octa 7420 1,80Ghz.. so i dont have a different CPU or version, just lower clock.
I also checked the Sys\devices\system\cpu folder : only the ''scaling_max_freq_KT'' is 2400000 the rest (''cpuinfo_max_freq'' and ''ren_max_freq'') are at 1800000 .. i cannot modify these files and change the security(read write) fast enough ... they get rewritten before i can make them read-only And in Synapse when i want to change the CPU Governor it cannot and says(example from a LONG list of lines): RunCommandFailedException : /res/synapse/actions//tuning[852]:can't create /sys/devices/system/cpu/cpu0/cpufreq/ktoonnservative/block_cycles_offline_screen_off:No such file or directory/res/synapse/actions//
So, i read on wiki that for overclocking (or any change on freq) you have to have Root (which i do) BUT ALSO write access on the ''SystemPartitions'' ..Question is, why don't I (and synapse obviously) have this access? And why can I then (because I certainly do can) remount for example ''/system'' Filesystem R/W with FX Root file manager if I dont have this write access..? are these two entirely different things??
I will now try to flash a ''PAC'' firmware...and see if it changes anything..
Thank you for your patience to read all this and for your answers if you have any ideas..
UPDATE:
Different PAC firmwares with appropriate .PIT files (except the G928G Variant which Odin just didn't want to flash) also didn't change anything (even with ''Re-Partition'' and ''Nand Erase All'' buttons selected in Odin): CPU max freq. still 1,80Ghz .. ;-(( The only thing I could try in Odin is to also select the ''Phone Bootloader Update'' ..but i read that this will mess with the primary (Samsungs) Recovery..which is the only thing i DONT want to lose..

sensationvsgalaxy said:
..
UPDATE:
Different PAC firmwares with appropriate .PIT files (except the G928G Variant which Odin just didn't want to flash) also didn't change anything (even with ''Re-Partition'' and ''Nand Erase All'' buttons selected in Odin): CPU max freq. still 1,80Ghz .. ;-(( The only thing I could try in Odin is to also select the ''Phone Bootloader Update'' ..but i read that this will mess with the primary (Samsungs) Recovery..which is the only thing i DONT want to lose..
Click to expand...
Click to collapse
Have you flashed any of bootloaders or modems ?

Konsstantine34 said:
Have you flashed any of bootloaders or modems ?
Click to expand...
Click to collapse
I flashed all of these via odin: http://forum.xda-developers.com/s6-...ject-zen-firmware-pit-file-galaxy-s6-t3179515
inside there are 4 Files + the .pit file
no errors when flash(and PASS! at finish) so I think they ALL install correctly ..Are there no modems inside of these files? and with bootloader- i thought the BL_G928FXXU2AOJ5_CL5943955_QB6592119_REV00_user_low_ship.tar is the bootloader file.. or you mean I should select the ''Phone bootloader update'' button in odin? won't that remove\break Samsungs blue recovery\Download mode...i read this somewhere ( not on xda..)

sensationvsgalaxy said:
I flashed all of these via odin: http://forum.xda-developers.com/s6-...ject-zen-firmware-pit-file-galaxy-s6-t3179515
inside there are 4 Files + the .pit file
no errors when flash(and PASS! at finish) so I think they ALL install correctly ..Are there no modems inside of these files? and with bootloader- i thought the BL_G928FXXU2AOJ5_CL5943955_QB6592119_REV00_user_low_ship.tar is the bootloader file.. or you mean I should select the ''Phone bootloader update'' button in odin? won't that remove\break Samsungs blue recovery\Download mode...i read this somewhere ( not on xda..)
Click to expand...
Click to collapse
maybe it's important to add, that when booting it does NOT say ''Live Demo Unit'' anymore- just '' Samsung Galaxy s6Edge+ Powered by Android '' just like a normal one.The first days I had it, it also showed ''Live Demo Unit'' under the Phone name (like in this smaller s6: https://www.youtube.com/watch?v=YARluwqhWhg -at 1:03)
The guy who sold it to me, said ''it had got an OTA UPDATE and now has the firmware of a normal one''-but obviously it didn't :laugh: Then at some point -I don't know exactly when-, during the INTENSE flashing period (all available STOCK variant-firmwares \all available custom ROMS and all Custom Kernels and a lot of COMBINATIONS of these) '' LDU'' was gone...
so I did manage to change something deeply inside..but unfortunately my brain\knowledge meets it's end here .. (i also checked every init. boot file or files beginning with the name ''exynos7420''- in /system /etc or /sys.. but found nothing relevant, and when I did - I could not modify\edit them)

sensationvsgalaxy said:
maybe it's important to add, that when booting it does NOT say ''Live Demo Unit'' anymore- just '' Samsung Galaxy s6Edge+ Powered by Android '' just like a normal one.The first days I had it, it also showed ''Live Demo Unit'' under the Phone name (like in this smaller s6: https://www.youtube.com/watch?v=YARluwqhWhg -at 1:03)
The guy who sold it to me, said ''it had got an OTA UPDATE and now has the firmware of a normal one''-but obviously it didn't :laugh: Then at some point -I don't know exactly when-, during the INTENSE flashing period (all available STOCK variant-firmwares \all available custom ROMS and all Custom Kernels and a lot of COMBINATIONS of these) '' LDU'' was gone...
so I did manage to change something deeply inside..but unfortunately my brain\knowledge meets it's end here .. (i also checked every init. boot file or files beginning with the name ''exynos7420''- in /system /etc or /sys.. but found nothing relevant, and when I did - I could not modify\edit them)
Click to expand...
Click to collapse
'LDU' notification has nothing to do with in this case, its customizable(bootlogo/splashscreen) You can see mine in the attachment. So, If the Russian(in your added Youtube video) has got rid of this limitation of cpus, maybe you need to contact with him. I see every ldu user looks for the answers..

Konsstantine34 said:
'LDU' notification has nothing to do with in this case, its customizable(bootlogo/splashscreen) You can see mine in the attachment. So, If the Russian(in your added Youtube video) has got rid of this limitation of cpus, maybe you need to contact with him. I see every ldu user looks for the answers..
Click to expand...
Click to collapse
My journey in the last hours...
So, I sent Alex (name of the guy in video) an Email, asked him what he did with his LDU and he responded: ''Hi. Kernel arter97-11.0 and ROM official G928FXXU2AOKB Only not flash modem'' I am very thankful for his answer don't get me wrong, but he obviously kept some secrets for himself, like how he got Cyanogenmod (with working camera!!) on that g928x .... (and with that galaxy s7-worthy Antutu score)
Then:
It was not easy finding the right thing : first i downloaded a one- part Firmware tar.md5-- I learned that i cant just delete the modem file inside because the md5 will be corrupt.. then got scared reading somewhere that i need Linux to make tar.md5 file... Then I discovered ''Unified_Android_ToolKit'' and learned how to create my own firmware without modem..but the Output file still failed at flashing with odin ..i thought because Country difference (last firmware on it-Germany -new one -Ukraine ) .. in the process I also broke Download mode.. ..then finally found a G928FXXU2AOKB -like he said but as 4-part firmware.. ( until now I had G928FXXU2AOJ5 ) So I did as he said and installed it( http://samsung-updates.ru/SM-G928F.html?version=G928FXXU2AOKB [4 Files / Service] ) WITHOUT the MODEM file (CP in Odin), then Arter97 11.0 Kernel..guess what? IT DID NOT WORK -same 1,29Ghz\ 1,80Ghz in CpuZ and Synapse ..:crying::crying::crying::crying::crying: So I'm back where I was 5 hours ago..(and also in the last 2 Weeks )... I am desperate .. I think tomorrow I will try installing this: http://forum.xda-developers.com/gal...development/cyanogenmod-13-galaxy-s6-t3269984 I know..its not for edge plus but ..there isnt such thing for our devices so Alex cant have taken that ROM we see in the video out of his b**t ..he surely improvised..and i will too.

just that you -my fellow g928x owners- know ..we won't get any help here on xda with our phone.. all the discussion I started on SkyHighs kernel Thread was simply deleted... We are left on our own..
So i wish you happy solitary modding! (don't PM me anymore and ask for help...cuz it seems there's no help on this Website)..

I have also LDU with same problems. Hope we will find the way to fix it.
---------- Post added at 07:37 PM ---------- Previous post was at 07:32 PM ----------
About the video earlier, model 925x has full cpu speed, it's only 928x problem.

AlexDaizy said:
I have also LDU with same problems. Hope we will find the way to fix it.
---------- Post added at 07:37 PM ---------- Previous post was at 07:32 PM ----------
About the video earlier, model 925x has full cpu speed, it's only 928x problem.
Click to expand...
Click to collapse
not even 928x problem : https://www.youtube.com/watch?v=zffch0zrR6A at 5:25
just some of 928x's problem :crying:
i mean, I can live without fingerprint scanner, or if it was 2,0 instead of 2,1Ghz ...but like this, my G Flex 2 with Snapdragon 810 is faster than this Exynos ..and my modded G2 is equally fast..which shouldn't be..(thats why i also bought this edge plus)

sensationvsgalaxy said:
not even 928x problem : https://www.youtube.com/watch?v=zffch0zrR6A at 5:25
just some of 928x's problem :crying:
i mean, I can live without fingerprint scanner, or if it was 2,0 instead of 2,1Ghz ...but like this, my G Flex 2 with Snapdragon 810 is faster than this Exynos ..and my modded G2 is equally fast..which shouldn't be..(thats why i also bought this edge plus)
Click to expand...
Click to collapse
I watched wrong video. I've just contacted Alexey with this question.

AlexDaizy said:
I watched wrong video. I've just contacted Alexey with this question.
Click to expand...
Click to collapse
which alexey? the one from video..? i don't think he will be able to help..i already asked him ..he has a normal LDU ..and between us -he's no Dorimanx... he's just a phone- reviewer .. who knows maybe marginally more than we do..... we need a pro- developer, who is willing to analyze the Stock\Arter97\SkyHigh kernels and then compare system files from a Normal G928F (or from a LDU with 2,1Ghz like the one in the video ) with system files from ours.. But no one is willing to do that even when some money is in the game(i would, but i dont know where these CPU and Motherboard-controlling files are located)..i wrote this a few days ago on Skyhigh and Arter Kernels thread:
''Small bounty\reward for getting G928X Normal Cpu Frequency
I am really so pissed off about this frequency thing, that I am willing to pay (via Paypal Transfer) 50€ (ca.55$) to anybody who can help me get the normal frequency until 1. March. If he (or her) can make it this week, I will even raise the bounty.. Unfortunately I cannot make it much higher (like a 200-300€ bounty -or at least not alone..), because I already paid 200€ on this underclocked piece of....... ... ....engineering.. so if I spend again so much..I might as well have bought a new ''NORMAL'' one from the store (G928F for example) and would have spared me all this trouble
Of course I will fully cooperate, experiment on my Edge and will send (via Xda or Dropbox if bigger ) all system files needed for analyzing\modifying
So it's certainly not a fortune but also think of the others (because I'm definitely not the only one with this problem) who will be grateful..
Whoever wants to join my bounty(I'm looking at you- unfortunate G928X owners), so that there's more money involved.. please send me a private message..''
At skyhigh it got deleted and at arter no reply or anything...

I tried the 6.0 Marshmellow firmware from s6 Edge -G925 and it didn't work.. With TWRP it turns off during installation of ROM zip .. Also 6.0 Bootloader flash in Odin fails..

sensationvsgalaxy said:
I tried the 6.0 Marshmellow firmware from s6 Edge -G925 and it didn't work.. With TWRP it turns off during installation of ROM zip .. Also 6.0 Bootloader flash in Odin fails..
Click to expand...
Click to collapse
What a surprise...

B3311 said:
What a surprise...
Click to expand...
Click to collapse
I am flashing my fu*king as* off, flashing everything I can think of just to get the fuc*ing normal CPU frequency for me and all the people in my situation , and you MOCK me!!!????? THEN FIND A BETTER SOLUTION YOURSELF!!
just kidding :angel::angel::angel::angel: but seriously now:
Why you say that? It isn't normal that I can install all F\C\W\K firmware\Kernel version either( for G928 admittedly) ..but i do can.. because X version is not that picky ... There were 50% chances that it would work..

Marshmellow 6.0.1 Experience
I tried this : http://forum.xda-developers.com/s6-edge-plus/general/how-to-android-6-0-1-sm-g928f-t3324523 and I got ''Touchwiz has stopped working'' ...but only the normal Touchwiz home--if i change to ''Easyhome'' in the settings (via Edge screen shortcuts) it works ...(but it looks ugly )
Then i checked with CPUZ and still 1.8Ghz and also no Fingerprint sensor ...
so I reverted to Lollipop and Arter kernel with no problem.. So it seems that something is written in the motherboard (not the cpu itself)..Idk if one can rewrite this..
Well, then the wait for a s7 begins ..(or like I said -someone talented that will look into this problem).

What's news?

El Is said:
What's news?
Click to expand...
Click to collapse
I sold it(of course for less than I bought it, but still.. )..no way to solve this problem.. Will get the s7

cpu mhz is not a real problem .. real problem is cpu never enter deepsleep so battery drain extremly fast.. forget the CPU 1.8 or 2.1 .. real question how I can enter deep sleep?

Does the YD-206 variant get the lollipop update natively?

With all the updating going on lately for the YotaPhone I am lost if the Chinese (YD-206) got the update? I mean without the hassle of trying to flash the RU version on it?
If not maybe could you help me find the cheapest YD-201 version? It's be greatly appreciated!
Also another question I had on my mind was how the performance is for simple VR games? I noticed it has Gyroscope and I wanted to use Riftcat and a leap motion to simulate a vive... Maybe use some freetrack with it to get some tracking so i can walk a little too! I don't wanna bore you all with the details but yeah do you guys think it can handle some of the games? I realize that riftcat just streams it from my PC but i'm not sure how intensive that is!
Thanks guys I appreciate it! Also if all works out and I get all that VR stuff going I'll keep you all updated! Again Thank You all so much

adc103 said:
With all the updating going on lately for the YotaPhone I am lost if the Chinese (YD-206) got the update? I mean without the hassle of trying to flash the RU version on it?
)
Click to expand...
Click to collapse
The Chinese version is unfortunately stuck on KitKat. Flashing to the RU firmware is not that hard and if it should fail you can always flash back to the Chinesae version.

Yes, I agree , it's easy , put handset in developer mode so your PC can talk to it, then install yotaflasher on the PC, 1 option to download your chosen firmware zip file then another option to flash your handset. If there is something wrong (normally adb drivers) you have not lost anything.
The problems will only start if it does not flash and you have to tinker.
But yes, I recommend that you try to update to the latest release.
Yes Yotaphone works very well with VR games, gets a little hot and uses battery , but so all handsets.
I think even if you buy the yd201 , you may not have an update selection, but I am not sure of this. They usually have a special modified retailer firmware with more languages and stopping updates. A few weeks ago when I ordered my yd206 there were plenty of international yd201s and even some white Yotaphone, but now there fewer.

Parmo100 said:
Yes, I agree , it's easy , put handset in developer mode so your PC can talk to it, then install yotaflasher on the PC, 1 option to download your chosen firmware zip file then another option to flash your handset. If there is something wrong (normally adb drivers) you have not lost anything.
The problems will only start if it does not flash and you have to tinker.
But yes, I recommend that you try to update to the latest release.
Click to expand...
Click to collapse
I think I am convinced too take my chance with the YD-206 now, I was just a little skeptical since I saw some others on the forum having problems trying to get it too RU. But in one of the threads a saw a solution if I can't get it too work by doing it manually.

Rooting issue with mx4 pro meizu phone - exhausted all avenues need advice please

Good Evening
I have recently acquired a Meizu MX4 PRO from my father who buys lots of phones mainly from Ebay and Aliexpress (direct from China) - He has had this phone for quite some time but could never really do much with it because everything was in Chinese and the flyme account is registered to a completely random email address that none of us recognize. Anyhow over christmas he was telling me about it and I said that I would take a look and see what I could do as I have some knowledge of rooting, TWRP, flashing etc. After a good couple of days of trying different things I am none the wiser. I can't for the life of me root this little monkey!
I have tried the following KINGROOT APK, KINGROOT PC, ADB, TERMINAL COMMAND (little knowledge), since exhausting all avenues (I have lost track how many threads I have read) I thought XDA may be my last hope, or at least to find out if it's possible?
Is there anyway of rooting this phone without getting in to the flyme account? - it does sound a bit dodgy I suppose asking this, however it really does appear that a seller in china sold this phone without logging out of his\her account?
Specifications:
Model MX 4 PRO
Android Version 5.1.1
Build number Flyme 5.1.11.1A
Baseband version LTG_3.117.003
If its simply not possible then I will just give it back to my father and say its not possible to do anything with it.
Any help you can offer would be greatly received
Thanks for reading
Darren

Hi. I just bought one with a used flyme account (owner says nver create one....but has his name...probably just created it in the first run an doesn't remember...all in chinese xD) and rooted it easily with KingRoot (then all meizu apps went to hibernation...and no problems til now)
Try to downgrade or update to a beta and try again kingroot 4.8.1 and 4.9.5 did both the job on mine. (SuperSume not...)

You can flash the Chinese firmware with wiping the data first. When the flashing done, go to settings, format internal storage, then you can login your own account

Giovanni7cc said:
You can flash the Chinese firmware with wiping the data first. When the flashing done, go to settings, format internal storage, then you can login your own account
Click to expand...
Click to collapse
Hi
Thanks for the reply - What chinese firmware do I use to flash please? are you able to point me to a link? - I am familiar with flashing but I want to make sure that I am using the right firmware. Thanks

xamix said:
Hi. I just bought one with a used flyme account (owner says nver create one....but has his name...probably just created it in the first run an doesn't remember...all in chinese xD) and rooted it easily with KingRoot (then all meizu apps went to hibernation...and no problems til now)
Try to downgrade or update to a beta and try again kingroot 4.8.1 and 4.9.5 did both the job on mine. (SuperSume not...)
Click to expand...
Click to collapse
Hi sounds promising - Which software am I downgrading or upgrading to, the Meizu or Kingroot?

brambles1234 said:
Hi sounds promising - Which software am I downgrading or upgrading to, the Meizu or Kingroot?
Click to expand...
Click to collapse
I think I've unlocked all versions of FlymeOS with Kingroot...using the last beta and rooted too...
If it doesn't work at first just keep trying...till 100%

any luck ?

VNS-L23 help please someone????

good day everyone,
Please forgive me for asking this about the VNS-L23. I know there are tons on similar issues on the forum, I've been reading but non specific to my model. I also know that some of the solutions may work on the VNS-L23 variant as well but, I'm swamped and a bit confused. Can someone please assist in helping me restore the VNS-L23 back to stock OR the latest OS/firmware that is available?
I tried flashing a Nougat firmware, flash was successful but, when phone rebooted it would not go past the Huawei eRecovery, no matter what i try.
I tried flashing other VNS-L23 firmwares via 3 button method...no success
I tried 'Download latest version and recovery'...no success
I am able to get into Fastboot mode.
I tried to flash TWRP...i was unsuccessful (ADB did recognize device).....on FASTBOOT screen i see Phone: Locked FRP: unlocked...failed...command not allowed (i think)
I tried to use DC unlock-er to make some headway, of course i have to make a purchase costing 15 pounds. I always support these things but, i do not want to purchase and it still does not work.
According to DC unocker's detection:
Firmware: VNS-L23C605B120
FB LockState: Locked
USER LockState: Locked
You guys are awesome here and i know I'll get back my device to work....Please, I just bought it, not even 2 days and i cant even use it now because of this issue.
Many thanks in advance....Ronald

Is this the 2016 or 2017 model?

2016

Use the dload method to restore stock firmware (use a external sdcard for this) then you will be able to unlock bootloader flash twrp and whatever u want ect...ect... If you have no idea what I'm on about just reply or priv msg me.

Exiatron00 said:
Use the dload method to restore stock firmware (use a external sdcard for this) then you will be able to unlock bootloader flash twrp and whatever u want ect...ect... If you have no idea what I'm on about just reply or priv msg me.[/QUOTE
thank you....I've tried that too, with many firmwares.. all has failed. Even if it says VNS-L23, still it fails. I have a firmware now that was paid for, I tried the forced update and it keeps saying package not found.
can you assist me please?
if you have telegram we can converse better there...+18683527996
Click to expand...
Click to collapse

Exiatron00 said:
Use the dload method to restore stock firmware (use a external sdcard for this) then you will be able to unlock bootloader flash twrp and whatever u want ect...ect... If you have no idea what I'm on about just reply or priv msg me.
Click to expand...
Click to collapse
wich files did you use?

@grymmy @arturohergo
Hey guys did you solve your issues ?
Tell me if not, maybe i can help.
Cheers

Dadditz said:
@grymmy @arturohergo
Hey guys did you solve your issues ?
Tell me if not, maybe i can help.
Cheers
Click to expand...
Click to collapse
I just wanna known wich files i have to use for make a rollback

Guys...I tried and tried and tried. Was most frustrating so I resorted to someone from Pakistan with software and programs to bring my P9 lite back to life. If you guys want I can put you on to the person. Or, if we can sort it out here then better because, of course it comes with a small fee to restore my device back to normal but I was desperate. I will say though, I didn't regretted it.

arturohergo said:
I just wanna known wich files i have to use for make a rollback
Click to expand...
Click to collapse
Hi dude, ok, if you tell device version and exact stock firmware
a little possibility to find some rollback package still exist.
But what are exactly your issue ?
Maybe you don't need rollback files...
Can you boot to system ?
Cheers

Dadditz said:
Hi dude, ok, if you tell device version and exact stock firmware
a little possibility to find some rollback package still exist.
But what are exactly your issue ?
Maybe you don't need rollback files...
Can you boot to system ?
Cheers
Click to expand...
Click to collapse
My version is vns-L23C212B336
I have two problems:
1. When I'm on horizontal (for example whatching a vodeo in YouTube, or playing in a game) the screen rotates itself, and the comeback, even when the autorotate is off.
2. When I'm going to type something the keyboard hides itself and I have to open it again.
And that's all, I hope you can help me.
By the way, I have tried to make a factory reset but it didn't work.

arturohergo said:
I just wanna known wich files i have to use for make a rollback
Click to expand...
Click to collapse
Well, looking onto the UNIFIED HELP THREAD, in post #6
there is "UNBRICKING AND DOWNGRADING FROM EMUI 5" section.
Here are some rollback packages but not for L23...
You need that package and need the full ota L23C212B130 firmware
from which extract update.app.
I don't know how to grab those files. I've searched with
Firmware Finder but B130 full ota isn't there...
So, go to next step...
arturohergo said:
My version is vns-L23C212B336
I have two problems:
1. When I'm on horizontal (for example whatching a vodeo in YouTube, or playing in a game) the screen rotates itself, and the comeback, even when the autorotate is off.
2. When I'm going to type something the keyboard hides itself and I have to open it again.
And that's all, I hope you can help me.
By the way, I have tried to make a factory reset but it didn't work.
Click to expand...
Click to collapse
B336 seems to be the latest firmware and no update are available.
If you want play a bit with your device you should consider
a rebrand but it is a bit difficult to find correct L23oeminfo file and firmware.
Maybe it can be converted to L21 or L31 version but never tried, i won't risk..
Some payed services should exist to assist you...
That's all dude, feel free to ask.
Cheers
edit: modified the link to UHT thread.

well, i think i will resign.
Thanks for your help anyway.

grymmy said:
Guys...I tried and tried and tried. Was most frustrating so I resorted to someone from Pakistan with software and programs to bring my P9 lite back to life. If you guys want I can put you on to the person. Or, if we can sort it out here then better because, of course it comes with a small fee to restore my device back to normal but I was desperate. I will say though, I didn't regretted it.
Click to expand...
Click to collapse
Hi, I have the same problem with my Vns l23, could you tell me what firmware did you use to fix it?