Hi Everyone,
i know there are many very talented, smart guys here on xda (many even smarter then the ones at Sony\LG etc..) so i will try to explain as clearly as possible without becoming boring..
So, with my new S6Edge+
*I CAN (without any problems) : (i obviously have root)
-flash any official firmware i want (C\F\W...etc)
-install any custom ROM i want (through PhilzTouch)
-install any custom kernel i want (through PhilzTouch) -like arter97 and SkyHigh
i know (?) that these install properly(?) because in Settings-About Software -it says exactly the firmware\Kernel\Rom that i installed.
no bootloops for me, no brick...everything fine.
*THE PROBLEM (what i CANNOT DO) even with all this:
-I don't have the NORMAL CPU Frequency! (i get 1,8 instead of 2,1 Ghz for a57 and 1,29 instead of 1.5Ghz for a53).. even with SkyHigh kernel which should even have OVERCLOCK! (synapse says : ''illegalArgumentException: Default value not contained in given values.'') and shows all frequencies only up to 1,8Ghz.
-also the GPU seems crippled (with skyhigh kernel synapse controls go to 700Mhz ,but are not applying, with arter97 kernel they only go to 600mhz )...shouldn't s6 edge plus have 772 Mhz Gpu?
CPU-Z says: Samsung Exynos Octa 7420 1,80Ghz.. so i dont have a different CPU or version, just lower clock.
I also checked the Sys\devices\system\cpu folder : only the ''scaling_max_freq_KT'' is 2400000 the rest (''cpuinfo_max_freq'' and ''ren_max_freq'') are at 1800000 .. i cannot modify these files and change the security(read write) fast enough ... they get rewritten before i can make them read-only And in Synapse when i want to change the CPU Governor it cannot and says(example from a LONG list of lines): RunCommandFailedException : /res/synapse/actions//tuning[852]:can't create /sys/devices/system/cpu/cpu0/cpufreq/ktoonnservative/block_cycles_offline_screen_off:No such file or directory/res/synapse/actions//
So, i read on wiki that for overclocking (or any change on freq) you have to have Root (which i do) BUT ALSO write access on the ''SystemPartitions'' ..Question is, why don't I (and synapse obviously) have this access? And why can I then (because I certainly do can) remount for example ''/system'' Filesystem R/W with FX Root file manager if I dont have this write access..? are these two entirely different things??
I will now try to flash a ''PAC'' firmware...and see if it changes anything..
Thank you for your patience to read all this and for your answers if you have any ideas..
UPDATE:
Different PAC firmwares with appropriate .PIT files (except the G928G Variant which Odin just didn't want to flash) also didn't change anything (even with ''Re-Partition'' and ''Nand Erase All'' buttons selected in Odin): CPU max freq. still 1,80Ghz .. ;-(( The only thing I could try in Odin is to also select the ''Phone Bootloader Update'' ..but i read that this will mess with the primary (Samsungs) Recovery..which is the only thing i DONT want to lose..
sensationvsgalaxy said:
..
UPDATE:
Different PAC firmwares with appropriate .PIT files (except the G928G Variant which Odin just didn't want to flash) also didn't change anything (even with ''Re-Partition'' and ''Nand Erase All'' buttons selected in Odin): CPU max freq. still 1,80Ghz .. ;-(( The only thing I could try in Odin is to also select the ''Phone Bootloader Update'' ..but i read that this will mess with the primary (Samsungs) Recovery..which is the only thing i DONT want to lose..
Click to expand...
Click to collapse
Have you flashed any of bootloaders or modems ?
Konsstantine34 said:
Have you flashed any of bootloaders or modems ?
Click to expand...
Click to collapse
I flashed all of these via odin: http://forum.xda-developers.com/s6-...ject-zen-firmware-pit-file-galaxy-s6-t3179515
inside there are 4 Files + the .pit file
no errors when flash(and PASS! at finish) so I think they ALL install correctly ..Are there no modems inside of these files? and with bootloader- i thought the BL_G928FXXU2AOJ5_CL5943955_QB6592119_REV00_user_low_ship.tar is the bootloader file.. or you mean I should select the ''Phone bootloader update'' button in odin? won't that remove\break Samsungs blue recovery\Download mode...i read this somewhere ( not on xda..)
sensationvsgalaxy said:
I flashed all of these via odin: http://forum.xda-developers.com/s6-...ject-zen-firmware-pit-file-galaxy-s6-t3179515
inside there are 4 Files + the .pit file
no errors when flash(and PASS! at finish) so I think they ALL install correctly ..Are there no modems inside of these files? and with bootloader- i thought the BL_G928FXXU2AOJ5_CL5943955_QB6592119_REV00_user_low_ship.tar is the bootloader file.. or you mean I should select the ''Phone bootloader update'' button in odin? won't that remove\break Samsungs blue recovery\Download mode...i read this somewhere ( not on xda..)
Click to expand...
Click to collapse
maybe it's important to add, that when booting it does NOT say ''Live Demo Unit'' anymore- just '' Samsung Galaxy s6Edge+ Powered by Android '' just like a normal one.The first days I had it, it also showed ''Live Demo Unit'' under the Phone name (like in this smaller s6: https://www.youtube.com/watch?v=YARluwqhWhg -at 1:03)
The guy who sold it to me, said ''it had got an OTA UPDATE and now has the firmware of a normal one''-but obviously it didn't :laugh: Then at some point -I don't know exactly when-, during the INTENSE flashing period (all available STOCK variant-firmwares \all available custom ROMS and all Custom Kernels and a lot of COMBINATIONS of these) '' LDU'' was gone...
so I did manage to change something deeply inside..but unfortunately my brain\knowledge meets it's end here .. (i also checked every init. boot file or files beginning with the name ''exynos7420''- in /system /etc or /sys.. but found nothing relevant, and when I did - I could not modify\edit them)
sensationvsgalaxy said:
maybe it's important to add, that when booting it does NOT say ''Live Demo Unit'' anymore- just '' Samsung Galaxy s6Edge+ Powered by Android '' just like a normal one.The first days I had it, it also showed ''Live Demo Unit'' under the Phone name (like in this smaller s6: https://www.youtube.com/watch?v=YARluwqhWhg -at 1:03)
The guy who sold it to me, said ''it had got an OTA UPDATE and now has the firmware of a normal one''-but obviously it didn't :laugh: Then at some point -I don't know exactly when-, during the INTENSE flashing period (all available STOCK variant-firmwares \all available custom ROMS and all Custom Kernels and a lot of COMBINATIONS of these) '' LDU'' was gone...
so I did manage to change something deeply inside..but unfortunately my brain\knowledge meets it's end here .. (i also checked every init. boot file or files beginning with the name ''exynos7420''- in /system /etc or /sys.. but found nothing relevant, and when I did - I could not modify\edit them)
Click to expand...
Click to collapse
'LDU' notification has nothing to do with in this case, its customizable(bootlogo/splashscreen) You can see mine in the attachment. So, If the Russian(in your added Youtube video) has got rid of this limitation of cpus, maybe you need to contact with him. I see every ldu user looks for the answers..
Konsstantine34 said:
'LDU' notification has nothing to do with in this case, its customizable(bootlogo/splashscreen) You can see mine in the attachment. So, If the Russian(in your added Youtube video) has got rid of this limitation of cpus, maybe you need to contact with him. I see every ldu user looks for the answers..
Click to expand...
Click to collapse
My journey in the last hours...
So, I sent Alex (name of the guy in video) an Email, asked him what he did with his LDU and he responded: ''Hi. Kernel arter97-11.0 and ROM official G928FXXU2AOKB Only not flash modem'' I am very thankful for his answer don't get me wrong, but he obviously kept some secrets for himself, like how he got Cyanogenmod (with working camera!!) on that g928x .... (and with that galaxy s7-worthy Antutu score)
Then:
It was not easy finding the right thing : first i downloaded a one- part Firmware tar.md5-- I learned that i cant just delete the modem file inside because the md5 will be corrupt.. then got scared reading somewhere that i need Linux to make tar.md5 file... Then I discovered ''Unified_Android_ToolKit'' and learned how to create my own firmware without modem..but the Output file still failed at flashing with odin ..i thought because Country difference (last firmware on it-Germany -new one -Ukraine ) .. in the process I also broke Download mode.. ..then finally found a G928FXXU2AOKB -like he said but as 4-part firmware.. ( until now I had G928FXXU2AOJ5 ) So I did as he said and installed it( http://samsung-updates.ru/SM-G928F.html?version=G928FXXU2AOKB [4 Files / Service] ) WITHOUT the MODEM file (CP in Odin), then Arter97 11.0 Kernel..guess what? IT DID NOT WORK -same 1,29Ghz\ 1,80Ghz in CpuZ and Synapse ..:crying::crying::crying::crying::crying: So I'm back where I was 5 hours ago..(and also in the last 2 Weeks )... I am desperate .. I think tomorrow I will try installing this: http://forum.xda-developers.com/gal...development/cyanogenmod-13-galaxy-s6-t3269984 I know..its not for edge plus but ..there isnt such thing for our devices so Alex cant have taken that ROM we see in the video out of his b**t ..he surely improvised..and i will too.
just that you -my fellow g928x owners- know ..we won't get any help here on xda with our phone.. all the discussion I started on SkyHighs kernel Thread was simply deleted... We are left on our own..
So i wish you happy solitary modding! (don't PM me anymore and ask for help...cuz it seems there's no help on this Website)..
I have also LDU with same problems. Hope we will find the way to fix it.
---------- Post added at 07:37 PM ---------- Previous post was at 07:32 PM ----------
About the video earlier, model 925x has full cpu speed, it's only 928x problem.
AlexDaizy said:
I have also LDU with same problems. Hope we will find the way to fix it.
---------- Post added at 07:37 PM ---------- Previous post was at 07:32 PM ----------
About the video earlier, model 925x has full cpu speed, it's only 928x problem.
Click to expand...
Click to collapse
not even 928x problem : https://www.youtube.com/watch?v=zffch0zrR6A at 5:25
just some of 928x's problem :crying:
i mean, I can live without fingerprint scanner, or if it was 2,0 instead of 2,1Ghz ...but like this, my G Flex 2 with Snapdragon 810 is faster than this Exynos ..and my modded G2 is equally fast..which shouldn't be..(thats why i also bought this edge plus)
sensationvsgalaxy said:
not even 928x problem : https://www.youtube.com/watch?v=zffch0zrR6A at 5:25
just some of 928x's problem :crying:
i mean, I can live without fingerprint scanner, or if it was 2,0 instead of 2,1Ghz ...but like this, my G Flex 2 with Snapdragon 810 is faster than this Exynos ..and my modded G2 is equally fast..which shouldn't be..(thats why i also bought this edge plus)
Click to expand...
Click to collapse
I watched wrong video. I've just contacted Alexey with this question.
AlexDaizy said:
I watched wrong video. I've just contacted Alexey with this question.
Click to expand...
Click to collapse
which alexey? the one from video..? i don't think he will be able to help..i already asked him ..he has a normal LDU ..and between us -he's no Dorimanx... he's just a phone- reviewer .. who knows maybe marginally more than we do..... we need a pro- developer, who is willing to analyze the Stock\Arter97\SkyHigh kernels and then compare system files from a Normal G928F (or from a LDU with 2,1Ghz like the one in the video ) with system files from ours.. But no one is willing to do that even when some money is in the game(i would, but i dont know where these CPU and Motherboard-controlling files are located)..i wrote this a few days ago on Skyhigh and Arter Kernels thread:
''Small bounty\reward for getting G928X Normal Cpu Frequency
I am really so pissed off about this frequency thing, that I am willing to pay (via Paypal Transfer) 50€ (ca.55$) to anybody who can help me get the normal frequency until 1. March. If he (or her) can make it this week, I will even raise the bounty.. Unfortunately I cannot make it much higher (like a 200-300€ bounty -or at least not alone..), because I already paid 200€ on this underclocked piece of....... ... ....engineering.. so if I spend again so much..I might as well have bought a new ''NORMAL'' one from the store (G928F for example) and would have spared me all this trouble
Of course I will fully cooperate, experiment on my Edge and will send (via Xda or Dropbox if bigger ) all system files needed for analyzing\modifying
So it's certainly not a fortune but also think of the others (because I'm definitely not the only one with this problem) who will be grateful..
Whoever wants to join my bounty(I'm looking at you- unfortunate G928X owners), so that there's more money involved.. please send me a private message..''
At skyhigh it got deleted and at arter no reply or anything...
I tried the 6.0 Marshmellow firmware from s6 Edge -G925 and it didn't work.. With TWRP it turns off during installation of ROM zip .. Also 6.0 Bootloader flash in Odin fails..
sensationvsgalaxy said:
I tried the 6.0 Marshmellow firmware from s6 Edge -G925 and it didn't work.. With TWRP it turns off during installation of ROM zip .. Also 6.0 Bootloader flash in Odin fails..
Click to expand...
Click to collapse
What a surprise...
B3311 said:
What a surprise...
Click to expand...
Click to collapse
I am flashing my fu*king as* off, flashing everything I can think of just to get the fuc*ing normal CPU frequency for me and all the people in my situation , and you MOCK me!!!????? THEN FIND A BETTER SOLUTION YOURSELF!!
just kidding :angel::angel::angel::angel: but seriously now:
Why you say that? It isn't normal that I can install all F\C\W\K firmware\Kernel version either( for G928 admittedly) ..but i do can.. because X version is not that picky ... There were 50% chances that it would work..
Marshmellow 6.0.1 Experience
I tried this : http://forum.xda-developers.com/s6-edge-plus/general/how-to-android-6-0-1-sm-g928f-t3324523 and I got ''Touchwiz has stopped working'' ...but only the normal Touchwiz home--if i change to ''Easyhome'' in the settings (via Edge screen shortcuts) it works ...(but it looks ugly )
Then i checked with CPUZ and still 1.8Ghz and also no Fingerprint sensor ...
so I reverted to Lollipop and Arter kernel with no problem.. So it seems that something is written in the motherboard (not the cpu itself)..Idk if one can rewrite this..
Well, then the wait for a s7 begins ..(or like I said -someone talented that will look into this problem).
What's news?
El Is said:
What's news?
Click to expand...
Click to collapse
I sold it(of course for less than I bought it, but still.. )..no way to solve this problem.. Will get the s7
cpu mhz is not a real problem .. real problem is cpu never enter deepsleep so battery drain extremly fast.. forget the CPU 1.8 or 2.1 .. real question how I can enter deep sleep?
Related
Dear All,
I have the following phone:
Model number: GT-I9100G
Android version: 2.3.5
Baseband version: I9100GZCKI1
Kernel Version: 2.6.35.7 [email protected]#2
Build Number: GINGERBREAD-ZCKI1
This phone is original bought in China Mainland, so, no google sync, no market, no Whatsapp... Even no useful GPS...
I was reading lot of posts and I decided to change my firmware into a european one...
I get the open europe version, download Odin, put in debug mode...
SOFT BRICK! (Now I know perfectly the meaning of this).
PANIC MODE ON!
Cold sweat running my back, ashtray full, 2:30 am... Nothing.
Next morning, after a hard night full of nightmares with my phone, I was searching information how to get it back... so I get the official chinese firmware.
Download again, use Odin, Start... NOTHING!
I was searching a JTAG service center in China when OMG, a clever malasian guy said:
"The secret to the sauce: The correct PIT file should have been included, and "re-partition" option is ticked and the correct PIT file for I9100G is as attached."
**I can't post the link**
(PS: THANK YOU VERY VERY VERY MUCH!!!!)
uffff! Saved.
As now I have the key to come back to the original status... Let's try other options...
I tried superoneclick: Blocked on step 7
I tried another post here suggesting use the I9100ZNKG5-ownhere-v1.2.4.Odin:Success, but, can't turn on. Stops at the beggining with our yellow triangle friend...
Oh, I've forget to say that I'm in china, so search and download firmwares is an epic task! hotfile, rapidshare and so on are blocked! At least I have a VPN, but I'm sure that not everyone have...
So now, what can I do? Is there any solution to take the chinese firmware out?
I was wondering maybe the .pit file is the solution to use ZNKG5... but I can't find it anywhere.
I have read another post from a Colombian guy (sorry, I don't have the link) that there is method changing the modem in a clockwork orange... really, too complicated to me.
My intention is keep a post with all the files needed to change the firmware if is possible.
You can put here your links and I will upload the files into chinese web storages, because the problem is from phones bought from China, so I guess people will be living in China...
I get the open europe version, download Odin, put in debug mode...
SOFT BRICK! (Now I know perfectly the meaning of this).
PANIC MODE ON!
Usual is not flashing G Model firmware but flashing i9100 firmware .
PIT files are dangerous do not use or repartition as that may brick your phone .
jje
So, can I use any firmware meanwhile is G version?
Maybe I've downloaded the not G one...
Well, try is worthy.
You need to use i9100g firmware, I9100 stuff will not work.
Now to root you can flash this kernel, http://forum.xda-developers.com/showthread.php?t=1369977
There is a custom rom for the i9100g, let me just find it and I will come back and link
Edit: rom http://forum.xda-developers.com/showthread.php?t=1374135
You can also check http://www.sammobile.com/firmware/ for stock unmodified roms, but make sure you use one for i9100g, that g is important, it's almost a totally different phone than the international version, only the name and screen are the same.
Sent from my GT-I9100 using Tapatalk
Veyka, Any Kernel is OK?
I mean, they are:
XXLA1
JPKK1
DZKL3
But my phone is chinese (GZCKI1)
Unkim said:
Veyka, Any Kernel is OK?
I mean, they are:
XXLA1
JPKK1
DZKL3
But my phone is chinese (GZCKI1)
Click to expand...
Click to collapse
To be honest I don't know that much about the i9100g, download your stock firmware, from sammobile or elsewhere, (I tried looking but the results where mostly in Chinese which I don't speak, sorry) so if the version you flash does not work you can jump back
Here is more info; http://forum.lowyat.net/topic/2068824/all
Also Google for checkfus as it should allow you to download the firmwares from Samsung.
Sent from my GT-I9100 using Tapatalk
FFS, G model has a different CPU do not use any NONE G firmware.
Chinese model has different signed boots which will reject any firmware which is NOT for the Chinese version.
Double Trouble
Take it back, go to a black market and buy the international version
or just enjoy the phone as it was meant to be.
But we are speaking about software right?
I mean, must be a way to change the boot right or something right?
And hope I could turn it back, but too late... And I'm sure that more people should be in the same situation.
Unkim said:
But we are speaking about software right?
I mean, must be a way to change the boot right or something right?
And hope I could turn it back, but too late... And I'm sure that more people should be in the same situation.
Click to expand...
Click to collapse
You could use JTAG and change the boots to the normal G version instead of the Chinese G boots.
Hey! I have the market on my phone! and Whatsapp!
As soon as I can link webs I will put all of the information!!!
Yujuuuuuuuuuuu!!!!
It's like have a new phone!
Ok, I can paste links.
I will upload the files and share them next week.
Ok!
As promised here are the files and guide about how to change your chinese i9100g into a "civilizated" phone:
STEP 0 (SECURITY COPY)
Make a security copy of your contacts, pictures, movies.... This process will delete EVERYTHING from your phone.
STEP 1 (ODIN)
Get Odin from below link and open it
http://www.wupload.com/file/2677120037/Odin3-v1.85.zip
STEP 2 (ROOT)
Download below link and root your phone with Odin.
http://www.wupload.com/file/2677118927/I9100G_ZCKH4_KERNEL_ROOT.tar
There are several guides on this forum about how to do but moreless is:
Take out the connection wire if you have it
Turn off your phone
Put it into download state (volume down+home+power)
Press volume up to confirm the download state
Turn on Odin
Connect the phone to the computer
on PDA use the KERNEL ROOT file that you have just downloaded
re-partition must be UNchecked
START
STEP 3 (ROM)
Download the link below and do the same procedure as above but in the PDA put the file you just have downloaded.
http://www.wupload.com/file/2677117442/I9100G_ZCKI1_MIC_03.tar
STEP 4 (WIFI & Yellow triangle on start up)
Download below link and same as before (Put this file on PDA and START).
http://www.wupload.com/file/2677119517/i9100G_ZCKI1_KERNEL.tar
Your phone will be in chinese as when you bought it. Just change the language.
ENJOY!!!
Oh, in case of failure or just "in case"...
Original firmware:
http://www.wupload.com/file/2677126677/I9100GZCKI1_I9100GZCKI1_I9100GOZHKI1.tar.md5
.Pit file to make it owrks:
http://www.wupload.com/file/2677120247/omap4_all_20110627_emmc.pit
Oh, now the problem is how to get a good GPS available in China, because google navigator can't work...
Suggestions are accepted!
Google navigation not work is normal , because only work in europe or usa , asia and hong kong can't use it
Unkim said:
Oh, now the problem is how to get a good GPS available in China, because google navigator can't work...
Suggestions are accepted!
Click to expand...
Click to collapse
http://c.autonavi.com/club/update/index.jsp?companyname=samsung
Google Nav doesn't work here in Taiwan either. C'mon guys, get rid of the evil Zhongunhai cabal!
downwiththebanksters said:
get rid of the evil Zhongunhai cabal!
Click to expand...
Click to collapse
lolwut?!
you can't see this text because I have hided it using the wonderful powers of bad english grammar.
BTW I now have a real solution to do CHN <> EUR without JTAG, lets see which box is now the first to add it If nothing happens by the time I am off vacation I will release it
Odia said:
BTW I now have a real solution to do CHN <> EUR without JTAG, lets see which box is now the first to add it If nothing happens by the time I am off vacation I will release it
Click to expand...
Click to collapse
Oh please please please become my personal hero and share your wisdom with the world! I can't wait to finally get rid of all the chinese BS on my phone!
Hope to hear from you soon, enjoy ur holiday!
Would flashing .pit file do any good? I bored of this censorship everywhere.
Sent from my GT-I9100G using XDA
Hi! I read every forum/post I could, but I don't know what else to do... I'm not and advance user, but I'm used to flashing ROMs, Stock ROMs, trying recoverys etc. always had an Android phone and I always unlock the bootloader, flash new rom and blah blah... so, here's my problem T^T
A week ago I buy a Samsung S4 GT i9500... not 'casuse I'm a fan of Samsung, but 'cause the price was great (at least in my Country)... The glas was cracked, but the touch was ok, the only thing broken was the front camera, but hey... I'll never used it
So the phone was able to connect to all the 3 carriers in my country (Argentina) Personal - Movistar - Claro. So I started with a Custom Recovery... everything OK
I always used the CyanogenMOD roms, so I downloaded the last one for my phone... but was kinda buggy... so I started to look for another options, I downloaded MIUI (official) but was too chinese for my taste, I mean, no Play Store, half of the phone options was in chinese, so... I moved on... the last one was Thunder Universe V6... was ok, nice skins, fast... stable... but the battery was the problem, almost 1% per minute, with power save activated so... I decided to go back to Stock ROM or Firmware... but I couldn't find one for my country or the links were dead...
So I finally found this one (I don't know if I can post a link to another forum so I will post the specs only):
Model: GT-I9500
Model name: GALAXY S4
Country: Argentina
Version: Android 4.4.2
Changelist: 2735569
Build date: Tue, 09 Sep 2014 11:17:09 +0000
Product Code: ANC
PDA: I9500UBUGNI1
CSC: I9500ANCGNI1
MODEM: I9500UBUGNI1
Flashed with Odin, no errors, everything went ok... but after all the update, all my apps I realize that I have signal bars, but no carrier connection... only "Emergency Calls Only"
I started to read, and try a couple of things, but no luck... if I change the modem/radio/baseband I got the "unknown baseband" "uknown IMEI" thing... I flashed the phone to the previous roms, Cyano and Thunder but the problem remains...
I don't know what else to do :s and send my phone to someone for fixing it is very expensive, more than half the price of a new phone :s so if there is something I could try to fix it myself, will be amazing...
If u need more data, or whatever just ask, and i will do it, and post the result...
thanks in advance and sorry for my crappy eng >.<
VV0LF said:
Hi! I read every forum/post I could, but I don't know what else to do... I'm not and advance user, but I'm used to flashing ROMs, Stock ROMs, trying recoverys etc. always had an Android phone and I always unlock the bootloader, flash new rom and blah blah... so, here's my problem T^T
A week ago I buy a Samsung S4 GT i9500... not 'casuse I'm a fan of Samsung, but 'cause the price was great (at least in my Country)... The glas was cracked, but the touch was ok, the only thing broken was the front camera, but hey... I'll never used it
So the phone was able to connect to all the 3 carriers in my country (Argentina) Personal - Movistar - Claro. So I started with a Custom Recovery... everything OK
I always used the CyanogenMOD roms, so I downloaded the last one for my phone... but was kinda buggy... so I started to look for another options, I downloaded MIUI (official) but was too chinese for my taste, I mean, no Play Store, half of the phone options was in chinese, so... I moved on... the last one was Thunder Universe V6... was ok, nice skins, fast... stable... but the battery was the problem, almost 1% per minute, with power save activated so... I decided to go back to Stock ROM or Firmware... but I couldn't find one for my country or the links were dead...
So I finally found this one (I don't know if I can post a link to another forum so I will post the specs only):
Model: GT-I9500
Model name: GALAXY S4
Country: Argentina
Version: Android 4.4.2
Changelist: 2735569
Build date: Tue, 09 Sep 2014 11:17:09 +0000
Product Code: ANC
PDA: I9500UBUGNI1
CSC: I9500ANCGNI1
MODEM: I9500UBUGNI1
Flashed with Odin, no errors, everything went ok... but after all the update, all my apps I realize that I have signal bars, but no carrier connection... only "Emergency Calls Only"
I started to read, and try a couple of things, but no luck... if I change the modem/radio/baseband I got the "unknown baseband" "uknown IMEI" thing... I flashed the phone to the previous roms, Cyano and Thunder but the problem remains...
I don't know what else to do :s and send my phone to someone for fixing it is very expensive, more than half the price of a new phone :s so if there is something I could try to fix it myself, will be amazing...
If u need more data, or whatever just ask, and i will do it, and post the result...
thanks in advance and sorry for my crappy eng >.<
Click to expand...
Click to collapse
Hi mate ,
Try flashing a stock rom and see if it helps.....but to me it looks like the EFS folder is broken , do you have an EFS folder back up? if not you may have to take the phone to a local service center ( samsung or not) and have the imei fix, you need a box like Z3X or similar to do it.
MAX 404 said:
Hi mate ,
Try flashing a stock rom and see if it helps.....but to me it looks like the EFS folder is broken , do you have an EFS folder back up? if not you may have to take the phone to a local service center ( samsung or not) and have the imei fix, you need a box like Z3X or similar to do it.
Click to expand...
Click to collapse
Hi! thanks for replaying! I can't find a stock rom for my country or the links are dead :s the one I downloaded (I put the specs on my previous post) seems to be an unbranded stock rom... but I don't really know, I don't have an EFS folder back up >.< I know... my bad here :s I read about the z3x box or the octopus one, but I was hoping for another problem more easy to fix :s there is a way to be sure that is the EFS folder? like 100%? there is nothing more I can do or try? :c
Thanx again!
VV0LF said:
Hi! thanks for replaying! I can't find a stock rom for my country or the links are dead :s the one I downloaded (I put the specs on my previous post) seems to be an unbranded stock rom... but I don't really know, I don't have an EFS folder back up >.< I know... my bad here :s I read about the z3x box or the octopus one, but I was hoping for another problem more easy to fix :s there is a way to be sure that is the EFS folder? like 100%? there is nothing more I can do or try? :c
Thanx again!
Click to expand...
Click to collapse
Hi ,
the stock rom you flashed should been fine ( check here for stock rom for your country http://www.sammobile.com/firmwares/database/GT-I9500/PSN/ ) , if that did not help can it only be two things hardware ( like the sim caddy) or the EFS folder....there is no way to know without one of those boxes....
The repair should run around 25 usd........
MAX 404 said:
Hi ,
the stock rom you flashed should been fine ( check here for stock rom for your country http://www.sammobile.com/firmwares/database/GT-I9500/PSN/ ) , if that did not help can it only be two things hardware ( like the sim caddy) or the EFS folder....there is no way to know without one of those boxes....
The repair should run around 25 usd........
Click to expand...
Click to collapse
Thx Max, the firmware I downloaded was from that site, but like I said was an unbrended one, so I will download one from the link u post, and will come back with the results =) thx again for your help!
well... sadly the problem remains... everything works great, but I can't connect to any network carrier... just emergency calls u.u
if there is nothing more to try...
Thx again for your help MAX
VV0LF said:
well... sadly the problem remains... everything works great, but I can't connect to any network carrier... just emergency calls u.u
if there is nothing more to try...
Thx again for your help MAX
Click to expand...
Click to collapse
Sorry to hear that mate ,
if you are skill , open the phone and check the antenna cable , make sure is tight in place...just in case
Hi all !
I'm here cause i really need your help and to be honest everything i've found on web so far, is telling totally the opposite things so i'm lost.
Let me explain a ltl, i purchased a Samsung Galaxy S7 Edge Duos/Dual Sim black version (SM-G935FD).
Actually i'm from France ( and i was travelling to Serbia for work, and broke my Note 4 )... The problem is i can't do any update from the phone "Registration Failed" when i click on it.
So after few hours on google, looks like the updates simply doesn't work cause i'm moving France - Serbia ... and the phone seems to be imported from Vietnam.
...
first of all, do you think this update problem is realy linked to this ?
second, i was searching on SAMMOBILE for SM-G935FD to try to put a French Firmware with odin (i don't even know if i can do such a thing without ****ing it up ?)... and on this model all i could find are countries from ASIA.
when i type *#1234# in call i get this :
AP : G935FXXU1BPJG
CP : G935FXXU1BPJG
CSC : G935FOXE1BPH1 (i'm not sure if its a O or a 0 ... the letter or the number :-/)
Model : SM-G935FD
in the Software Infos (in settings) i got this :
Android Version : 6.0.1
BaseBand Version : G935FXXU1BPJG
Kernel Version : 3.18.14-9519568
Version Number : MMB29K.G935FXXU1BPJG
...
please guys i spent a lot of money (in hurry) for this phone, and i'm scared that i got ****ed by the vendor...
if anyone here knows something and can help me... would mean a lot...
Thanks in advance for any kind of help guys.
please guys... if someone got any answer... would mean a lot...
as well if u need any information that can help you answer me feel free to ask...
thanks again.
No need to worry INAX93,
Firmware for 935F will work on 935-FD
Please go to the link below (external link)
http://www.sammobile.com/firmwares/download/115870/G935FXXU1BPLB_G935FOXA1BPL2_XEF/
You can download this firmware and flash it using Odin_3.12.3 in the download mode by pressing volume down+home+power key when ur phone is switched off and selecting the correct files (the firmware package contains 4 files, hence you need to select the correct slot) and you should be good to go with latest firmware for France...
Hope this helps...
max9979 said:
No need to worry INAX93,
Firmware for 935F will work on 935-FD
Please go to the link below (external link)
[not allowed link cause new member]
You can download this firmware and flash it using Odin_3.12.3 in the download mode by pressing volume down+home+power key when ur phone is switched off and selecting the correct files (the firmware package contains 4 files, hence you need to select the correct slot) and you should be good to go with latest firmware for France...
Hope this helps...
Click to expand...
Click to collapse
Thank you a million times! And yes it bhelps a lot!
I feel a lot better just with the hope your reply gave me!
So you are sure that i can go with this french firmware and will not get any trouble right? (cause the thing is that i'm not able to even find on Sammobile the firmware i currently have, and looks like its impossible to save from the device without rooting...)
I see a lot of people getring troubles with some functions not working...
And the last thing do you think the "registration failed" that i get when i click on manual update in the phone settings is linked to my location? (not being in Vietnam?)
Thanks a lot again!
Hello, french too, flashed Orange ROM for g935F on my brand new g935FD, everything OK.
Joyeux Noel
valiran said:
Hello, french too, flashed Orange ROM for g935F on my brand new g935FD, everything OK.
Joyeux Noel
Click to expand...
Click to collapse
Oh salut salut ! Thanks a lot! I guess i'll do try to do it today then! Thanks a lot!
Joyeux Noel a toi et aux tiens !
Merry Christmas to all of you guys! And thanks again for your help and kindness!
I use the ZTO 935F firmware on my 935FD with no problems, works without problems.
Dont worry INAX93 this is a confirmed official download of the French firmware. Dont worry it wont trip knox if done correctly and also your phone will be restored to french firmware without any trouble. I have done similar attempts of flashing official G935F firmware on my G935-FD without any problems am able to update and knox warranty also intact. So go ahead and wish you a merry christmas and a happy new year....
---------- Post added at 03:57 AM ---------- Previous post was at 03:56 AM ----------
Registration will also succeed INAX93 so dont you worry...just go ahead and flash the firmware....cheers....
Hi guys !
I just wanted to thank you all one more time ! with your help i did it ! now my phone (SM-G935FD) is with his French XEF firmware !
So thanks a lot to all of you for your help !
Merry Christmas and Happy new year to all of you !
Hi dear experts !
Hope all of you guys are going well, that the new year brought only positive things to you and your family !
I'm back in this thread cause I need your help one more time... everything was well until approx 6 months ago maybe a ltl more... maybe when the 7.0 version went out...
Actually that's when I faced the problem cause i bought a Gear S3 Frontier... I started having troubles with notifications mostly, they were delayed (sometimes for 3-4 hours !)...
While doing a lot of tests in all ways... i found that when i uninstalled all the updates linked to the "Google" app, or disabling it... it solved the problem... Then 6-7 months later i got pissed of cause i wanted to use some of the Google Now features... So i started searching again... after all kind of tests, i finally found that the problem also get solved when my Bluetooth is OFF... When it's set to off i can have the last update for the Google app and everything works fine...
So as i discovered that, i started thinking... maybe the only problem i have actually is a problem with my Bluetooth... as it started 6-7 months ago, 7.0 Version, Gear S3... the point is I started using the Bluetooth before (for my car) and it was always on... but maybe all mixed together... the Google app updates, the 7.0 Version and the Gear S3 king od bluetooth use... is not mixing well... or i don't know...
then i remembered that i flashed my S7 Edge (g935FD) from Vietnam with a firmware from France (g935F)... and maybe i did something incorrect while flashing that led to some Bluetooth troubles that i just discovered... (i had some problems with bluetooth before, like reconnecting randomly to a bluetooth device even if i disconnected it or things like that... )...
So i started searching and find out that there is actually few different way of flashing it, using odin... and i was unable to find a clear explanation of the differencies to be able to understand what i need to do to flash my phone again and in the best conditions.
There is people saying that a bad way of flashing can lead to bluetooth issues (and other things even worse but ok...), so if someone here can explain me, how can i manage to do it the best way... it would mean a lot...
differences between CSC and Home_CSC for example ? then some people are saying "check the re-partition" others say that you must avoid that... how do I know what is the best to do ?
then a lot of them are talking about CSC codes ?
I hope someone will have answers, i want to try to flash it again to try to solve this problem, without bricking it, and also without triggering the knox thing...
thanks in advance for help again...
Ps : the problem i was talking about is :
https://forum.xda-developers.com/s7-edge/help/s7-edge-notification-delay-problems-t3635161
or even :
https://us.community.samsung.com/t5...and-Answers/Delayed-notifications/td-p/114947
no one ? please guys...
still no one to help ?
guys i need just to know if it may solve my problem to flash my phone...
i need to know if i need to check the "re-partition" thing in Odin... somewhere they say "you must check it if you are changing the CSC" and other say "You must avoid checking this unless you have a Pit file" ...
So what is the correct thing to do ?
Just to tell the fellow users of S7 edge .. don't update to the newest december security patch due to huge battery drain by android OS, kernel and system (samsung process)
The new bootloader is also version 7 which means you cannot go back once upgraded..
Previous firmware S6 ESH5 comparison with S7ESL6
Avg battery life of 1 day (a bit more) / Avg SOT : around 7 hours
Usage: medium usage.. (no gaming/youtube/video.. mainly chatting , fb usage and whatsapp.. and light/medium browsing on chrome most apps put to always sleep.. no phone calls (only using wifi), no auto sync, aod and location services disabled and using dual sim - dual standby) on S6ESH5
Avg battery life of less then half a day / Avg SOT : less then 4 hours..
Usage : very light usage (occasional browsing/chat.. no gaming/video/youtube.. very little browsing on chrome.. no calls.. most apps put to always sleep, no phone calls (only using wifi), no auto sync, aod and location services disabled and using dual sim - dual standby) on S7ESL6
In my opinion.. this maybe the last and worst update for s7 series which samsung has clearly done that to push the users of this amazing device to upgrade to their newer phones.. I highly regret updating my phone.. and so i felt it necessary to warn others .. Good luck !
scheduled obsolescence is real and Samsung does it even with your best phones
If I'm not mistaken, Bootloader
---------- Post added at 05:11 AM ---------- Previous post was at 05:07 AM ----------
If I'm not mistaken, Bootloader
ESL9 ESLA seems better for battery even if I never had 7h sot of my s7egde's whole life :laugh:
BL got nothing to do with battery drains... it boots up operating system, if i'm not mistaken? Battery drain is related to CP.
ric69 said:
ESL9 ESLA seems better for battery even if I never had 7h sot of my s7egde's whole life :laugh:
Click to expand...
Click to collapse
Don't know about that version .. maybe its in eu region?
Really easy to get 7 hours SOT if you follow my usage scenario ?
Just put all apps which you dont want real time notifications to always sleep.. keep auto sync, bluetooth, location off unless you actively use any of them.. use more wifi instead of mobile data .. auto brightness always set on (quite low brightness on my phone) every other feature (whatever i forgot to mention here is also disabled)
ModX81 said:
BL got nothing to do with battery drains... it boots up operating system, if i'm not mistaken? Battery drain is related to CP.
Click to expand...
Click to collapse
I never said about bl draining or anything. I just said latest firmware is causing much battery drains and you cannot downgrade firmware because they updated bootloader to V7 in this latest firmware update
Sent from my S7 Edge using XDA Labs
shah22 said:
I never said about bl draining or anything. I just said latest firmware is causing much battery drains and you cannot downgrade firmware because they updated bootloader to V7 in this latest firmware update
Sent from my S7 Edge using XDA Labs
Click to expand...
Click to collapse
people will infer all kinds of things from posts, thats the drawback about forums. you say something and think that the person reading what you wrote will gather the same information from what you said that you were intending. Doesnt always happen that way tho for an example, this post that im currently writing might be interpreted as mean, condescending or rude and it isnt intended to be like that in the slightest. Que ser a ser a, i suppose have a great day!
Hi, does anyone knows how to check the bootloader and firmware version? i'd already update like 1 or 2 moths ago and I've had the phone for about 4 months, so i can't give a properly opinion about battery performance.
I was doubting if i should root or not and when finally got decided to do it I'd found your post, do you think that this could affect the rooting process? Cause did read in one of the last post from Arona67's guide on how to root a8 stock rom, a guy saying he messed up his phone flashing twrp with a new firmware downloaded from sammobile. I had been stuck with a Galaxy Alpha bootloader locked for a few years and would be a shame if i can't root again
Sorry if i misunderstand something, english is not my native language, and the last device i rooted was a cooper(Galaxy Ace)!, so you can imagine how outdated i am.
Thanks very much for your help and have a nice day :good:
Macydnah said:
Hi, does anyone knows how to check the bootloader and firmware version? i'd already update like 1 or 2 moths ago and I've had the phone for about 4 months, so i can't give a properly opinion about battery performance.
I was doubting if i should root or not and when finally got decided to do it I'd found your post, do you think that this could affect the rooting process? Cause did read in one of the last post from Arona67's guide on how to root a8 stock rom, a guy saying he messed up his phone flashing twrp with a new firmware downloaded from sammobile. I had been stuck with a Galaxy Alpha bootloader locked for a few years and would be a shame if i can't root again
Sorry if i misunderstand something, english is not my native language, and the last device i rooted was a cooper(Galaxy Ace)!, so you can imagine how outdated i am.
Thanks very much for your help and have a nice day :good:
Click to expand...
Click to collapse
Yes , updating bootloader is not the thing to do if you want to root, makes things difficult..
Bootloader number is written after G935FXX or G935FOJV after these terms its either S7 or U7 where 7 is bootloader version , 7 is the latest version.. the problem you cannot downgrade to a lower bootloader number firmware e.g 7 to 6 or 5..
Its easy to find the firmware details , use about > software information.. good luck..
Sent from my S7 Edge using Tapatalk
Hello.
Did anyone have problem installing twrp after update?
I tried the latest version of twrp and phone got in bootloop.
Thanks in advance.
Can you help me out
Tapas27s said:
Can you help me out
Click to expand...
Click to collapse
Still need help? What were you trying to do exactly?
Sent from my S7 Edge using XDA Labs
shah22 said:
Just to tell the fellow users of S7 edge .. don't update to the newest december security patch due to huge battery drain by android OS, kernel and system (samsung process)
The new bootloader is also version 7 which means you cannot go back once upgraded..
Previous firmware S6 ESH5 comparison with S7ESL6
Avg battery life of 1 day (a bit more) / Avg SOT : around 7 hours
Usage: medium usage.. (no gaming/youtube/video.. mainly chatting , fb usage and whatsapp.. and light/medium browsing on chrome most apps put to always sleep.. no phone calls (only using wifi), no auto sync, aod and location services disabled and using dual sim - dual standby) on S6ESH5
Avg battery life of less then half a day / Avg SOT : less then 4 hours..
Usage : very light usage (occasional browsing/chat.. no gaming/video/youtube.. very little browsing on chrome.. no calls.. most apps put to always sleep, no phone calls (only using wifi), no auto sync, aod and location services disabled and using dual sim - dual standby) on S7ESL6
In my opinion.. this maybe the last and worst update for s7 series which samsung has clearly done that to push the users of this amazing device to upgrade to their newer phones.. I highly regret updating my phone.. and so i felt it necessary to warn others .. Good luck !
Click to expand...
Click to collapse
Just so I understand, today latest official rom is on S8 not S7 right ? How is this compared to S7, same bad drain and performance as S7 ?
As a total noob,Im asking, can we revert to S6 somehow ? Isnt the bootloader something thats flashable with ODIN if you have the correct AP,BL,CP,CSC?
laurentiudll said:
Just so I understand, today latest official rom is on S8 not S7 right ? How is this compared to S7, same bad drain and performance as S7 ?
As a total noob,Im asking, can we revert to S6 somehow ? Isnt the bootloader something thats flashable with ODIN if you have the correct AP,BL,CP,CSC?
Click to expand...
Click to collapse
S8 binary if not worst, is the same as S7 one, same battery drains, even on a debloated stock rom..
And no you cannot revert to old binaries like s6 because bootloader cannot be downgraded..
But i read somewhere once that using bootloader and csc of new firmwares with ap and cp of older firmwares works (i never tested that myself so can't say if you could downgrade using this method)
The biggest problem of updating to a higher binary is that if that binary has serious issues like performance / battery drains then you couldnot downgrade to older binaries (no guaranteed methods) and oems sometimes cripple performance / introduce battery drains in older devices on purpose ..
Plus if your phone gets messed up, and you need combination binary to recover it then you are out of luck as latest combination binaries for s7 series are also not leaking into internet/or in general availability..
Sent from my SM-G935F using Tapatalk
shah22 said:
S8 binary if not worst, is the same as S7 one, same battery drains, even on a debloated stock rom..
And no you cannot revert to old binaries like s6 because bootloader cannot be downgraded..
But i read somewhere once that using bootloader and csc of new firmwares with ap and cp of older firmwares works (i never tested that myself so can't say if you could downgrade using this method)
The biggest problem of updating to a higher binary is that if that binary has serious issues like performance / battery drains then you couldnot downgrade to older binaries (no guaranteed methods) and oems sometimes cripple performance / introduce battery drains in older devices on purpose ..
Plus if your phone gets messed up, and you need combination binary to recover it then you are out of luck as latest combination binaries for s7 series are also not leaking into internet/or in general availability..
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Interesting.. I dont understand anything about binaries but i will attempt to install the following firmware looking at updato for reference firmware, so i can download it from SamFirm in a attempt to downgrade bootloader to obtaint that battery life youre talking about. It seems like this is what I need right ? It has S6 after the XX name. Can you please confirm? Also how do i check my current bootloader version ?
This is what I will attempt to install
Country / Region Romania
PDA G935FXXS6ESI4
Product Code ROM
CSC G935FROM6ESI4
Phone G935FXXS6ESI6
Later edit 1:
Interesting, I cant find the XXS6 firmware, even tho i input the correct data in SamFirm. It keeps giving me S8
https://imgur.com/ieM9CfK
Later edit 2:
after much researching it seems like SamFirm will only provide the latest firmware there is for your phone, nothing older. Since updato download speed is still trash I ended up on a website called Samfrew that has the older firmwares available for download at decent speeds (40minutes instead of 12 hours)
Will attempt to flash this:
PDA/AP Version G935FXXS6ESI4
CSC Version G935FROM6ESI4
MODEM/CP Version G935FXXS6ESI6
Region ROM — Romania
Build Date 2019-09-17
Changelist 14843133
OS Oreo
OS Version 8.0.0
Later edit 3:
Yep, it failed.
Attempting now a combination of "using bootloader and csc of new firmwares with ap and cp of older firmwares works" but i dont know exactly which is important out of the bl ap cp csc to have as XXS6
Later edit 4:
Total failure, nothing works. I lurked the forums and google for 2 hours now, no one said it concrete how they did it.. Where did you find the information ?
laurentiudll said:
Interesting.. I dont understand anything about binaries but i will attempt to install the following firmware looking at updato for reference firmware, so i can download it from SamFirm in a attempt to downgrade bootloader to obtaint that battery life youre talking about. It seems like this is what I need right ? It has S6 after the XX name. Can you please confirm? Also how do i check my current bootloader version ?
This is what I will attempt to install
Country / Region Romania
PDA G935FXXS6ESI4
Product Code ROM
CSC G935FROM6ESI4
Phone G935FXXS6ESI6
Later edit 1:
Interesting, I cant find the XXS6 firmware, even tho i input the correct data in SamFirm. It keeps giving me S8
https://imgur.com/ieM9CfK
Later edit 2:
after much researching it seems like SamFirm will only provide the latest firmware there is for your phone, nothing older. Since updato download speed is still trash I ended up on a website called Samfrew that has the older firmwares available for download at decent speeds (40minutes instead of 12 hours)
Will attempt to flash this:
PDA/AP Version G935FXXS6ESI4
CSC Version G935FROM6ESI4
MODEM/CP Version G935FXXS6ESI6
Region ROM — Romania
Build Date 2019-09-17
Changelist 14843133
OS Oreo
OS Version 8.0.0
Later edit 3:
Yep, it failed.
Attempting now a combination of "using bootloader and csc of new firmwares with ap and cp of older firmwares works" but i dont know exactly which is important out of the bl ap cp csc to have as XXS6
Later edit 4:
Total failure, nothing works. I lurked the forums and google for 2 hours now, no one said it concrete how they did it.. Where did you find the information ?
Click to expand...
Click to collapse
Binaries are just another word for the firmware , binary number means the bootloader number which is after G935FXX which is 8 at the moment..
About that combination of using different parts.. yes i read that here on xda..
You cannot downgrade bootloader to a lower number, but they described how they used newer firmware bootloader and modem with older ap and csc..
Maybe try using older g935fxxs6 ap and cp and g935fxxs8 bl and csc..
Or using g935fxxs6 ap and csc and g935fxxs8 bl and cp
Or try with g935fxxs6 ap, csc and cp and g935fxxs8 bl
Or lastly try with 935fxxs6 ap and g935fxxs8 cp, csc and bl..
I still suspect this trick is not gonna work for newer firmwares..
Edit : use samfw for firmware downloads
Edit2 : samfirm only downloads latest firmware
Sent from my hero2lte using XDA Labs
Hello,as i said in the title,I am getting troubles with my Samsung Galaxy s7 edge 935t,it originally runs android 6.0.1,and i wanted to upgrade it to the newest official android rom,so,i read the topics on phonandroid,as there was almost no topic on XDA,I followed the steps,downloaded the files they told me to download,and it has now turned into a 935a,idk why,and i can't get out of the "factory binary" i have no way to start android of anything,i can't either install a .zip file like with twrp,wich i installed on my tablet and works just fine.
BTW,i discovered that there is 2 variants of the s7 edge,the exynos and the snapdragon one,and that the snapdragon is not flashable,and that's the one I got,but knew that after trying the flash with odin
i couldn't get the image uploaded through google drive and i don't know how to put it in here,so if you want images of the phone,feel free to ask
LaMontreBelge said:
Hello,as i said in the title,I am getting troubles with my Samsung Galaxy s7 edge 935t,it originally runs android 6.0.1,and i wanted to upgrade it to the newest official android rom,so,i read the topics on phonandroid,as there was almost no topic on XDA,I followed the steps,downloaded the files they told me to download,and it has now turned into a 935a,idk why,and i can't get out of the "factory binary" i have no way to start android of anything,i can't either install a .zip file like with twrp,wich i installed on my tablet and works just fine.
BTW,i discovered that there is 2 variants of the s7 edge,the exynos and the snapdragon one,and that the snapdragon is not flashable,and that's the one I got,but knew that after trying the flash with odin
i couldn't get the image uploaded through google drive and i don't know how to put it in here,so if you want images of the phone,feel free to ask
Click to expand...
Click to collapse
Have you tried flashing G935t software via odin?
https://www.sammobile.com/samsung/g...e/SM-G935T/TMB/download/G935TUVSACSI1/297176/
Try this
thx
UsmaniMustafa said:
Have you tried flashing G935t software via odin?
Try this
Click to expand...
Click to collapse
hello,thanks for replying,i don't remember well if i tried or not,since it's been 3 days i'm searching on how to fix it,i tried multiple things,even what a guy on youtube with the exact same phone and problem told me to do,but i'll try your link,have a good day !
edit : i cannot download using your link,it tells me to upgrade my account,so,could you post it on google drive or something else please ?
LaMontreBelge said:
hello,thanks for replying,i don't remember well if i tried or not,since it's been 3 days i'm searching on how to fix it,i tried multiple things,even what a guy on youtube with the exact same phone and problem told me to do,but i'll try your link,have a good day !
edit : i cannot download using your link,it tells me to upgrade my account,so,could you post it on google drive or something else please ?
Click to expand...
Click to collapse
I can't upload it to google drive but you can also use this tool to download.
XDA thread :https://forum.xda-developers.com/galaxy-s7/how-to/updato-largest-online-firmware-archive-t3413785
Hope this helps