Database Users

Which buttons can be assigend by AE Button Plus?

In AE Button Plus I only could assign the two phone buttons. What about the "Home Button", "Back Button", "Calendar" and "Contacts"?

The back button can be assigned. Assign things to the "OK-button" i AE Button Plus to assign it to the back button.

Great! Thank you very much.

Hi, here is a reply on AEB Plus compatibility with the HD direct from the developer:
---------------------------
Hello David,
Thanks, it is always nice to know if you find this utility interesting
As for your question: yes, BPlus is compatible with HD as well as any other PocketPC 2k3 / PocketPC 2k3SE / WM5/WM6/WM6.1 devices.
The problem I know on Touch HD:
- Home key may not be remapped due to driver implementation
- Long keypresses are not detected in BPlus for green/red keys and “back” button (button driver limitation).
- “Back” button corresponds to the “Ok” in button list so you will not need to add it via File->Add key but just re-define “Ok” button instead
- Backlight controlling will work in next BPlus release (should appear this week)
Anyway – just try and install BPlus to check if it will suit your needs before buying. It have very few “demo” mode limitations...
Regards,
Alexander
----------------------------

all keys except home key works great on mine

By "all keys" you mean:
- left phone key
- back key
- right phone key?

mirandolo said:
By "all keys" you mean:
- left phone key
- back key
- right phone key?
Click to expand...
Click to collapse
Don't forget the Volume Buttons (long-press DOES work for those two)

Hi guys,
I played around with AE Buttons for a couple of hous last night and here's my experience:
- Volume up/down - Work like a charm.
- Home buttom - Can't be mapped.
- Back key - Didn't realize it was mapped to the Ok button. I tried it out tonight. Works fine, but I'm not sure what action should I put in the single press configuration to preserve it's normal function. "Ok/Close" a suppose. Can someone confirm, please ?
- Green/Red phone - work fine in single, double and triple press
- Green phone long press is mapped by the driver to a virtual button called "Button 1(Hold)" (It's just at the top of the AE Buttons list) and by default launches the voice dial program (this is defined in the Settings/Personal/Buttons/Program Buttons)
- Red phone long press - This is a tough one. This button can't be captured unless you set "Lock device" in Settings/Personal/Buttons/End key. In this case it generates a key code and you can record it as a new key in AE Buttons. There's a catch though. When you map an action to single press, Lock program is no longer executed. Your selected action is executed, but immediately after that the device goes to the today screen as if you have pressed the Home button.
- Power button - Can't be mapped at all. I wish this was possible. I wanted to make long pressing the power button to soft reset the device directly.
Hope this info is useful. It took me a couple of hours and A LOT of soft resets to try all the possible combinations

triffonovm said
[- Back key - Didn't realize it was mapped to the Ok button. I tried it out tonight. Works fine, but I'm not sure what action should I put in the single press configuration to preserve it's normal function. "Ok/Close" a suppose. Can someone confirm, please ?]
Confirmed.
John R

triffonovm said:
Hi guys,
I played around with AE Buttons for a couple of hous last night and here's my experience:
- Volume up/down - Work like a charm.
- Home buttom - Can't be mapped.
- Back key - Didn't realize it was mapped to the Ok button. I tried it out tonight. Works fine, but I'm not sure what action should I put in the single press configuration to preserve it's normal function. "Ok/Close" a suppose. Can someone confirm, please ?
- Green/Red phone - work fine in single, double and triple press
- Green phone long press is mapped by the driver to a virtual button called "Button 1(Hold)" (It's just at the top of the AE Buttons list) and by default launches the voice dial program (this is defined in the Settings/Personal/Buttons/Program Buttons)
- Red phone long press - This is a tough one. This button can't be captured unless you set "Lock device" in Settings/Personal/Buttons/End key. In this case it generates a key code and you can record it as a new key in AE Buttons. There's a catch though. When you map an action to single press, Lock program is no longer executed. Your selected action is executed, but immediately after that the device goes to the today screen as if you have pressed the Home button.
- Power button - Can't be mapped at all. I wish this was possible. I wanted to make long pressing the power button to soft reset the device directly.
Hope this info is useful. It took me a couple of hours and A LOT of soft resets to try all the possible combinations
Click to expand...
Click to collapse
I encountered the below problem.
After receiving or making a phone call, the button did not work for around 5 minutes. Instead of move the arrow up or down, it turn the volume up/down. After that the button work again as what I had configured.
Anyone having the same problem?

Regarding the back key. I have this not mapped for one touch, i.e., normal OK operation, and for double press I have it rotate the screen.
I don't like gsen and the gyrator - great apps but I just don't need them always there.

dannyng said:
I encountered the below problem.
After receiving or making a phone call, the button did not work for around 5 minutes. Instead of move the arrow up or down, it turn the volume up/down. After that the button work again as what I had configured.
Anyone having the same problem?
Click to expand...
Click to collapse
I have this problem too! Any solution to share?

That's weird - I have just tested and all the AEB Plus assignments worked before a call.
After a call the volume assignments I have (1 press = arrow up/down, 2 press = volume up/down, long press up = flash lamp, long press down = resco audio) don't work. All the volume presses just revert to the volume operation.
I also have the back/OK key assigned to screen rotate for double press. This works fine after the call.
So, status now is not working right - I'll wait and see if it fixes itself (!!) with a few minutes.

Cheesy Dave said:
That's weird - I have just tested and all the AEB Plus assignments worked before a call.
After a call the volume assignments I have (1 press = arrow up/down, 2 press = volume up/down, long press up = flash lamp, long press down = resco audio) don't work. All the volume presses just revert to the volume operation.
I also have the back/OK key assigned to screen rotate for double press. This works fine after the call.
So, status now is not working right - I'll wait and see if it fixes itself (!!) with a few minutes.
Click to expand...
Click to collapse
I found the fix. In AEB + there is a set of options. One of these is the "restore volume slider" - by default this restores volume control to the phone app. It appears not to reset it back after.
I have just turned all these "restore volume slider" options off and now AEB Plus works as it should (or as I expect).

Thanks for the fix!
I shall try it tonite!

Cheesy Dave said:
I found the fix. In AEB + there is a set of options. One of these is the "restore volume slider" - by default this restores volume control to the phone app. It appears not to reset it back after.
I have just turned all these "restore volume slider" options off and now AEB Plus works as it should (or as I expect).
Click to expand...
Click to collapse
I just tried it and it doesn't work. I guess it's a bug and need to be fixed by the developer. Hmmmm, just suprised that no one really notice this bug.

Same bug on volume up. I assigned 1P for standard function and 2P for WiFi toggle. Well after the first or second use, it looses mapping. To have it to work again a soft reset is needed...

Cheesy Dave said:
I found the fix. In AEB + there is a set of options. One of these is the "restore volume slider" - by default this restores volume control to the phone app. It appears not to reset it back after.
I have just turned all these "restore volume slider" options off and now AEB Plus works as it should (or as I expect).
Click to expand...
Click to collapse
Thanks a lot mate! Works purrfect! had the same problem going on.

Insane Devil said:
Thanks a lot mate! Works purrfect! had the same problem going on.
Click to expand...
Click to collapse
I'm glad this is working for some.
But, I got an email from the developer (who is very quick to respond to emails) that said he is aware of a fault with the phone interaction and has not been able to replicate it.
Removing the volume slider option for the phone might work (as it did for me) but it seems that the intermittent fault probably will remain.

Cheesy Dave said:
I'm glad this is working for some.
But, I got an email from the developer (who is very quick to respond to emails) that said he is aware of a fault with the phone interaction and has not been able to replicate it.
Removing the volume slider option for the phone might work (as it did for me) but it seems that the intermittent fault probably will remain.
Click to expand...
Click to collapse
Glad that it work for you (so envy, hehehehe) and thanks for the email to the developer.
Wondering why some HTC HD working (removing the volume slider option) and some not (like my case )

Softkeys & AE Button Plus v2.6.6.1

I am trying to change softkeys using AE Button Plus v2.6.6.1, I change their effect and save using AE Button Plus v2.6.6.1, but it does not work.
any suggestion?
thanks

http://forum.xda-developers.com/showthread.php?p=5178494#post5178494

thanks for your quick reply.
but I couldn't find any informations about softkeys in this link!

msrox said:
I am trying to change softkeys using AE Button Plus v2.6.6.1, I change their effect and save using AE Button Plus v2.6.6.1, but it does not work.
any suggestion?
thanks
Click to expand...
Click to collapse
Which buttons exactly. It does not work for windows button. For home and back it does not work for single press (aka always default option). In regards of home and back buttons the single press is always stock while you can setup only for one of them long press. It will work on home and back.
Volume up/down works single press, double press, triple press and long press works. Single press, double press and long press works for phone green button. Nothing seems to work for phone red button as it always switches off the device.

[Q] Launch power menu without key

I need launch the menu when you hold the power button some seconds appears (Reboot, power, profiles, etc) but without touch of the power button.
I found this tool: http://www.launcherpro.com/shortcutcreator/, but i can't make a file correct.
Anyone can help me??

BRONCHAS said:
I need launch the menu when you hold the power button some seconds appears (Reboot, power, profiles, etc) but without touch of the power button.
I found this tool: http://www.launcherpro.com/shortcutcreator/, but i can't make a file correct.
Anyone can help me??
Click to expand...
Click to collapse
Try Button Savior. Root required.
Open it and press 'Kill/Start Button Savior Service'. Then press on the arrow on the right.

jhonnyx1000 said:
Try Button Savior. Root required.
Open it and press 'Kill/Start Button Savior Service'. Then press on the arrow on the right.
Click to expand...
Click to collapse
Awesome!!!!
Works very good

jhonnyx1000 said:
Try Button Savior. Root required.
Open it and press 'Kill/Start Button Savior Service'. Then press on the arrow on the right.
Click to expand...
Click to collapse
Hi jhonny,
I've installed Button Saviour (BS) on my ICS CM9 beta3.
When I hold HOME 'button' of BS it correctly display list of running (or recently opened?) applications but when I HOLD the POWER 'button' it does NOT display menus as it should (if I press it it will turn off the display)
Do you have any idea why?
Thanks

Button Saviour problems!

I registered on here for this specific question, and any help would be greatly appreciated.
I recently rooted my Nook Simple Touch (1.1) with TouchNooter 1.1. Everything was working perfectly, except the home button. Every time I would press it, it would ask to open with 'Home' (later I found out this is the standard Nook home screen) or something else I could not remember that would send me to the Android home screen.
So a few hours after I rooted I selected Always open with 'Home' (the Nook home, not the Android home). Attempting to reverse this I re-rooted my Nook with no luck. Then I tried restoring it, but Button Saviour is still on the side! How is that possible?
I remember it saying I could reverse the problem by going to the Android settings app. But I can't do this because I can't reach the Android home!
So my question is: how can I clear the setting? I'm using Mac OS X. Thanks in advance

I followed this guide to reset my Nook: [N2E] Recovery and Source for Nook Touch (see Kohr-Ah's post) and re-rooted and everything was back to the way it was
Thanks anyways XDA

corbin052198 said:
I followed this guide to reset my Nook: [N2E] Recovery and Source for Nook Touch (see Kohr-Ah's post) and re-rooted and everything was back to the way it was
Thanks anyways XDA
Click to expand...
Click to collapse
If you come across this issue again, the simplest method is to put a second launcher in /data/app folder of TouchNooter, use the card again, this will force the choice to come up again.

GabrialDestruir said:
If you come across this issue again, the simplest method is to put a second launcher in /data/app folder of TouchNooter, use the card again, this will force the choice to come up again.
Click to expand...
Click to collapse
Alright, thanks

I'm aware that this is slightly offtopic but found that Button Saviour is useless (for me) and only consumes precious CPU. Just map "n" button to "go to desktop" in AWD settings and the only thing You loose is the back arrow but that one can be accesed from the upper bar (that with clock and battery) so 99,9% of the time Button Saviour is useless.
I've notices a slight improvement of Nook overall speed by uninstaling it.
You can uninstall it by apps like "root uninstaller" along with others systems apps (like gmail, music) (this topic pops up in google cause it has ambigious title so Ive just added this for others)

After I rooted, I can't go to the android home. Always goes to nook home. When I click the button savior it just say "Button Savior has ben denied superuser permission". Tried to connect using adb to uninstall Button savior but it doesn't work. Tried to root again using touchnooter 2.1.31 but no luck. Please help.

Soea said:
I'm aware that this is slightly offtopic but found that Button Saviour is useless (for me) and only consumes precious CPU. Just map "n" button to "go to desktop" in AWD settings and the only thing You loose is the back arrow but that one can be accesed from the upper bar (that with clock and battery) so 99,9% of the time Button Saviour is useless.
Click to expand...
Click to collapse
I thought I can live without button savior but in several apps I am using the upper bar is not available.

ssc742 said:
After I rooted, I can't go to the android home. Always goes to nook home. When I click the button savior it just say "Button Savior has ben denied superuser permission". Tried to connect using adb to uninstall Button savior but it doesn't work. Tried to root again using touchnooter 2.1.31 but no luck. Please help.
Click to expand...
Click to collapse
did You try long pressing the home button in button saviour? it should open a window with curently opened apps, i dont think this will help much but try it
cceerrtt said:
I thought I can live without button savior but in several apps I am using the upper bar is not available.
Click to expand...
Click to collapse
it just hit me theres another way
1.open Nook Touch Tools
2.select "B&N buttons"
3.select "'n' button goes to home directly"
4. (optionally) select "'reading now' button action" and choose "orientation" (so You can change orientation with one click by clicking that book icon in upper left corner)
5.select "Long press 'n' button action, change it to "Open recent app dialog"
6.select "show extra action buttons in recent dialog"
7.now you can access "back arrow" by long pressing the "n" button (physical button), i know its not the best (cause you have to press it like 3 sec) but it works xD

that's also my setup but I stay with the button savior (as a backup option) because sometimes it is more comfortable than longpressing "n" button, which doesn't work 100% and takes time.

Was able to fixed the issue. I restored to original and re-root again.
Thanks

I didn't find much utility in Button Savior. Except for the home button it mostly said "This feature requires 2.2".
With the "n" button hacked, the lower left hardkey as back and the lower right hardkey as menu I don't need anything more.

I would miss the original functionality (previous and next page) on the right side. I have just lower left button remmaped to Back. It would be great if NookTouchTools (cant remember the exact name) could allow to define also long press actions for hardware buttons (I would use those for menu access).

Once I got to Android home screen, I re-mapped my buttons. I'm right handed, so I usually don't use the left buttons. The top left button is Menu, the bottom left button is back, and long press home button is Android home. After that I killed Button Savior

Exactly the same for me.

[Q] AHHHHH I want my old galaxy button layout!!

Hi All
I've just got a S5 today. Overall I like it a lot however the bloody button res-assignments is soooooooo annoying!
Is there any to re-map the button layout back to the older galaxy versions? I.E.
Press the left button and the menu will activate (I know if I hold it down it will work but I keep forgetting and it brings up the tasker)
Hold the home button to bring up the tasker.
Frustrating yours
Paul

jokerni said:
Hi All
I've just got a S5 today. Overall I like it a lot however the bloody button res-assignments is soooooooo annoying!
Is there any to re-map the button layout back to the older galaxy versions? I.E.
Press the left button and the menu will activate (I know if I hold it down it will work but I keep forgetting and it brings up the tasker)
Hold the home button to bring up the tasker.
Frustrating yours
Paul
Click to expand...
Click to collapse
Root it -> Install Xposed -> Install GravityBox

Thanks, I had thought about it but its a new fone and you know what Samsung are like... I'm leaving towards re-mapping the key.
/system/usr/keylayout/Generic.kl
Anyone know the key number for the left button (Is it 138), what would I need to change to make the default option a menu. I suppose thinking out loud I want to swap the commands over. I.e. I press the key once I get the menu, press and hold I get the tasker.
Thanks
P.

Just long press the left button and the options come up
Sent from my SM-G900F using XDA Premium 4 mobile app

jokerni said:
Thanks, I had thought about it but its a new fone and you know what Samsung are like... I'm leaving towards re-mapping the key.
/system/usr/keylayout/Generic.kl
Anyone know the key number for the left button (Is it 138), what would I need to change to make the default option a menu. I suppose thinking out loud I want to swap the commands over. I.e. I press the key once I get the menu, press and hold I get the tasker.
Thanks
P.
Click to expand...
Click to collapse
Your best bet is to use gravity box, as suggested above. You can only change the recents function to menu via the file you mentioned. I believe the rest of the options you want are smali edits.