I'm trying to apply the correct firmware for my region UK and carrier which is EE but i can't seem to do this since it keeps failing on me when i start the process. This is the output from the logs.
Code:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Just some background info as to why and what i've done previously.
The problem is i can't update the software since it keeps on saying processing failed. After looking into this it may be linked to region of the device since the baseband versionis I9505XXUGNK4 and the CSC part is not a UK code which is why i'm guessing the phone can't be updated also on the phone screen it shows the following error message at the point at which it fails secure check fail sbl1
Also i used kingoroot to root the device and i have a superuser app install as well before using Odin but surely this can't be an issue can it?
Kingroot caused various issues before.
The thing is that Odin is very picky.
You should try other USB ports, preferably the ones in the back of the pc.
You should also try different cables, preferably the original one.
Also, different Odin and Windows versions.
GDReaper said:
Kingroot caused various issues before.
...
Click to expand...
Click to collapse
He mentions KingoRoot, not KingRoot.
tunds said:
...
Also i used kingoroot to root the device
...
Click to expand...
Click to collapse
Sent from my ASUS_Z00AD
I thought they are the same, just that people misspell the name >.<
Related
I tried to flash CM from SD, first time flashing custom ROM, my phone is rooted amd CWM is installed. was running stock 4.2.2 before
Stuck at Samsung screen and it wont move, i can get into CWM and Download mode, i tried flashing a Google Play 4.3 ROM using CWM. still doesnt move from Samsung screen.
If i flash in Odin 3.04 i get this
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMF8_I9505O2UBMG1_I9505XXUBMF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I also 'flashed'? the PIT and Firmware at the same time, same error message.
Tried on two PC's (One windows 8 one windows 7) also used another cable, different USB ports etc.
Any ideas?
ryannnnn said:
I tried to flash CM from SD, first time flashing custom ROM, my phone is rooted amd CWM is installed. was running stock 4.2.2 before
Stuck at Samsung screen and it wont move, i can get into CWM and Download mode, i tried flashing a Google Play 4.3 ROM using CWM. still doesnt move from Samsung screen.
If i flash in Odin 3.04 i get this
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMF8_I9505O2UBMG1_I9505XXUBMF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I also 'flashed'? the PIT and Firmware at the same time, same error message.
Tried on two PC's (One windows 8 one windows 7) also used another cable, different USB ports etc.
Any ideas?
Click to expand...
Click to collapse
It could be Knox... Enter in download mode and check if you can see a line called KNOX WARRANTY VOID. If you have it, please go to this thread.
Regards,
Urko
urko95 said:
It could be Knox... Enter in download mode and check if you can see a line called KNOX WARRANTY VOID. If you have it, please go to this thread.
Regards,
Urko
Click to expand...
Click to collapse
It's fixed, i flashed CM 10.2 RC2 in CWM it worked, then i flashed 4.3 GP addition and it's fine. WiFi doesnt work but i guess thats a new issue
Thanks!
Hi Guys,
Well first off i am sorry i am sure this is a very noob styled question but i am an idiot in need of some help
I have a Galaxy s4 GT-I9505 which i decided to root and have accidentally soft bricked
when i try to boot my phone up i get "firmware upgrade encountered an issue. please select recovery in kies and try again"
I have tried to recover my phone in Kies to no avail.
In download mode i get this error with oden
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Previously i was getting an error
<ID:0/003> Get PIT for mapping..
<ID:0/003> Removed!!
<ID:0/003> There is no PIT partition.
I have made sure Kies isn't running in task manager tried multiple USB slots (i don't have a spare cable to test with)
I would really appreciate any help you can offer
Thanks in advance
-----------------------Solved -------------------------------
I tried a new cable and it fixed the issue
i
llDrewll said:
Hi Guys,
Well first off i am sorry i am sure this is a very noob styled question but i am an idiot in need of some help
I have a Galaxy s4 GT-I9505 which i decided to root and have accidentally soft bricked
when i try to boot my phone up i get "firmware upgrade encountered an issue. please select recovery in kies and try again"
I have tried to recover my phone in Kies to no avail.
In download mode i get this error with oden
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Previously i was getting an error
<ID:0/003> Get PIT for mapping..
<ID:0/003> Removed!!
<ID:0/003> There is no PIT partition.
I have made sure Kies isn't running in task manager tried multiple USB slots (i don't have a spare cable to test with)
I would really appreciate any help you can offer
Thanks in advance
Click to expand...
Click to collapse
Check this, it seems same issue;
http://forum.xda-developers.com/galaxy-s3/help/nand-write-start-completewrite-t1846867
don't download anything from that thread just read what happened
as one of member mentioned there & Also in ur logs
thr s problem in NAND write operation
SO search "fix NAND Corrupted" or something like this.
i searched little bit but do it urself...
some opinions;
wipe ur phone through recovery (built-in recovery i mean)
and then try again....
:good:
llDrewll said:
Hi Guys,
Well first off i am sorry i am sure this is a very noob styled question but i am an idiot in need of some help
I have a Galaxy s4 GT-I9505 which i decided to root and have accidentally soft bricked
when i try to boot my phone up i get "firmware upgrade encountered an issue. please select recovery in kies and try again"
I have tried to recover my phone in Kies to no avail.
In download mode i get this error with oden
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Previously i was getting an error
<ID:0/003> Get PIT for mapping..
<ID:0/003> Removed!!
<ID:0/003> There is no PIT partition.
I have made sure Kies isn't running in task manager tried multiple USB slots (i don't have a spare cable to test with)
I would really appreciate any help you can offer
Thanks in advance
Click to expand...
Click to collapse
First of all I hope for your good that you have usb debugging enabled. Try to right click odin executable and run as administrator. After that restart flashing. It should work. Good luck.
Hiya Guys
Thanks for the advice so far, i have tried running oden as admin since the issue started with oden 3.09 and 3.07
I downloaded a stock firmware over night and received this error
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
i have tried holding the power home and up button to get my phone in to recovery but it just goes to the
"firmware upgrade encountered an issue. please select recovery in kies and try again"
screen
I am picking up a new cable today that i hope may fix the issue, i check the forum thread posted but it ended up in the user needing a new phone sadly
Any other thoughts?
Thanks for your time and help so far
Just try the basic stuff:
- Different usb port
- Different pc
- Different cable.
99% of the Odin problems is solved with it.
Thanks for the reply,
I have a different cable to test with when i get home tonight and i can try using my girlfriends laptop as well so thanks for the advice so far
I have a quick question, as i haven't had much trouble routing with the cf auto root i thought maybe i could just put a clean install of stock on my phone to get it working.
I left this firmware "I9505XXUFND7" downloading from sammobile.com before i left for work this morning, i am pretty sure it is correct for my GT-I9505 (no idea what the carrier was as it came unlocked and i am unsure of how to check).
Would anyone be kind enough to confirm this is the correct firmware or if it is wrong let me know which i should be using?
Thanks so much for your help so far people it really means a lot, sorry for the noob questions
Hi guys,
This is just a quick thank you for your help i tried a new cable and the firmware and it fixed the issue
I cant seem to unroot my phone at all back to a stock rom. It looks like an authentication problem with knox, but im not sure.
The rom im trying to flash is the I9505XXUHOJ2_I9505YXYHOK1_I9505XXUHOJ2.
Ive tried using a pit file before and it ended up soft bricking the phone.
Im really sick of CM13 and 12 and I'd love to get back to stock.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUHOJ2_I9505YXYHOK1_I9505XXUHOJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone, it says STAT [224,1440]
Enter download mode and read off the model number on the screen please?
The failure after trying to flash aboot.mbn indicates the rom being flashed has an older bootloader than the bootloader currently on the phone. Not sure if your phone has a downgradeable bootloader.
@audit13: I really need to read logs a bit more thoroughly.
That said, I think the bootloader can be downgraded, so long as the replacement has Knox included. I haven't tried it however, so you could just as easily be right.
The bootloader is probably not locked but I don't think a bootloader can be downgraded to 4.3 or older.
Honestly, I can't remember.
hello, this is my first post, so take it easy on me, I have an SM-a300f/ds and I rooted the phone, it was on 5.0.2, it worked fine but after a restart the phone did not boot up and I cannot enter recovery, the only choice I have is download mode (bootloader). And I found out this issue exist. now in order to make the phone work again i need to install the stock firmware and i download one, it was "4.4.4 Russia" from sammobile, the result was fail. the phone was bought in Iraq, so could it have been the "country/carrier" thing that it failed?
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
now i wonder if the firmware for A300f is the same as A300f/ds
if A300f/ds has different firmware then where can i find it, your help is appreciated.
note: i also own a gti9300 and i have flashed thousands of roms.
hawre96 said:
hello, this is my first post, so take it easy on me, I have an SM-a300f/ds and I rooted the phone, it was on 5.0.2, it worked fine but after a restart the phone did not boot up and I cannot enter recovery, the only choice I have is download mode (bootloader). And I found out this issue exist. now in order to make the phone work again i need to install the stock firmware and i download one, it was "4.4.4 Russia" from sammobile, the result was fail. the phone was bought in Iraq, so could it have been the "country/carrier" thing that it failed?
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
now i wonder if the firmware for A300f is the same as A300f/ds
if A300f/ds has different firmware then where can i find it, your help is appreciated.
note: i also own a gti9300 and i have flashed thousands of roms.
Click to expand...
Click to collapse
Did u unplug the phone while it was downloading?
If not flash twrp through odin, then enter in recovery (you should able to do this) and wipe data, cache, dalvik and system, then flash the stock firmware
DeadSquirrel01 said:
Did u unplug the phone while it was downloading?
If not flash twrp through odin, then enter in recovery (you should able to do this) and wipe data, cache, dalvik and system, then flash the stock firmware
Click to expand...
Click to collapse
I did not unplugged it after rooting it, however the problem was solved a while ago by restarting the phone after an hour of leaving it, thank you for your help
hawre96 said:
I did not unplugged it after rooting it, however the problem was solved a while ago by restarting the phone after an hour of leaving it, thank you for your help
Click to expand...
Click to collapse
No problem, I'm happy u solved the problem
odin logs:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i am trying to flast to stock firmware but odin fails me ... can someone have idea what to do ? my current rom is Imperium LL rom having problem with simcard not found then force me to restart >.<
Try again with:
Another USB port
Another USB cable
Another PC
Another Windows version
Another Odin version.
Odin stops after trying to b flash about.mbn which leads me to believe the rom is not for the phone or the phone bootloader is newer than the bootloader you are trying to flash.
audit13 said:
Odin stops after trying to b flash about.mbn which leads me to believe the rom is not for the phone or the phone bootloader is newer than the bootloader you are trying to flash.
Click to expand...
Click to collapse
thx ill try your suggestion...
GDReaper said:
Try again with:
Another USB port
Another USB cable
Another PC
Another Windows version
Another Odin version.
Click to expand...
Click to collapse
thanks ill try your suggestion