Related
I have twrp 2.6.3.2 installed. I used freegee to install it.
I want to be at latest version so I can back up EFS easily before I start flashing roms.
Is there an easy way to upgrade twrp?
Thanks
Hello,
sometimes I am reading that some users are installing TWRP via AutoRec.
But sometimes I am also reading that some users install Bump!ed versions of TWRP by simply flashing it directly via Flashify for example.
Are there any advantages/disadvantages comparing those methods?
Or would both give the same results?
What is currently considered the best way to install TWRP on the LG G2 when TWRP has not been installed yet?
Regards
wq0913562 said:
Hello,
sometimes I am reading that some users are installing TWRP via AutoRec.
But sometimes I am also reading that some users install Bump!ed versions of TWRP by simply flashing it directly via Flashify for example.
Are there any advantages/disadvantages comparing those methods?
Or would both give the same results?
What is currently considered the best way to install TWRP on the LG G2 when TWRP has not been installed yet?
Regards
Click to expand...
Click to collapse
It depends on the roms you will be using, if you're going to use a bumped ROM then using the latest stock base and flashing twrp though flashify is the cleanest method, but if the ROM you're using isn't bumped you need the jelly bean bootloader and thus should use autorec. Note that you can install bumped ROMs on the jelly bean bootloader but you CAN NOT install non bumped ROMs on the kitkat bootloader. If you are using a bumped setup and flash a non bumped ROM, it will boot loop. If you don't have a BUMPED ROM still on your storage, you will need to factory reset through download mode or fastboot (whichever you have, some flashable bootstacks purposefully break download mode to enable fastboot. I personally prefer download mode, if I can't get to an adb prompt I'd rather just flash a kdz).
wq0913562 said:
Hello,
sometimes I am reading that some users are installing TWRP via AutoRec.
But sometimes I am also reading that some users install Bump!ed versions of TWRP by simply flashing it directly via Flashify for example.
Are there any advantages/disadvantages comparing those methods?
Or would both give the same results?
What is currently considered the best way to install TWRP on the LG G2 when TWRP has not been installed yet?
Regards
Click to expand...
Click to collapse
Hey wq.
I very recently installed AutoRec on my D802, which has the latest 4.4.2 KK. It works flawlessly, and I recommend it. I believe the .apk installs TWRP 2.7.0.0, which has worked for me very well, and I have installed at least 15 different ROMs with it so far.
Hello,
thank you very much for your fast and detailed answers.
So, let's assume someone uses AutoRec to install TWRP for the first time on a LG G2, which only installs an old version of TWRP (version 2.7.0.0).
Which TWRP version should one then use to update to the latest version of TWRP?
Would you use the blastagator version from over there:
http://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705
Or would you use the official version from over there:
http://teamw.in/project/twrp2/197
And how would you install it?
By simply booting into TWRP 2.7.0.0 (provided by AutoRec) and then from there flashing the latest TWRP zip file?
Regards
wq0913562 said:
Hello,
thank you very much for your fast and detailed answers.
So, let's assume someone uses AutoRec to install TWRP for the first time on a LG G2, which only installs an old version of TWRP (version 2.7.0.0).
Which TWRP version should one then use to update to the latest version of TWRP?
Would you use the blastagator version from over there:
http://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705
Or would you use the official version from over there:
http://teamw.in/project/twrp2/197
And how would you install it?
By simply booting into TWRP 2.7.0.0 (provided by AutoRec) and then from there flashing the latest TWRP zip file?
Regards
Click to expand...
Click to collapse
I wanted to flash cloudy rom which is bumped.
So i straight away used flashify to flash bumped recovery and then flashed the rom..
No autorec needed.
I flashed blastgator's twrp with thermal control.
Hello,
I tried to install the new Nougat rom for jiayu S3, but it was unsuccessful. Phone got soft bricked, but I recovered it with a twrp backup.
My OS is android 4.4.4, and TRWP is 2.8. After installing the new rom , an installation error appeared and phone did not work.
I wonder it it's due to twrp 2.8, but I can't install twrp 3 (S3_h560_TWRP_3.0.2-0). There was an installation error with flashify...
The question is: can I install 7.0 from 4.4? Is it an Android problem, a TWRP issue, or just my clumsiness?
Thank you!
achilipu05 said:
Hello,
I tried to install the new Nougat rom for jiayu S3, but it was unsuccessful. Phone got soft bricked, but I recovered it with a twrp backup.
My OS is android 4.4.4, and TRWP is 2.8. After installing the new rom , an installation error appeared and phone did not work.
I wonder it it's due to twrp 2.8, but I can't install twrp 3 (S3_h560_TWRP_3.0.2-0). There was an installation error with flashify...
The question is: can I install 7.0 from 4.4? Is it an Android problem, a TWRP issue, or just my clumsiness?
Thank you!
Click to expand...
Click to collapse
in short:
To go from 4.4.4 to Nougat you need to go via LP RC5 via flashify using firmware upgrade.
This is because the partition layout is different from KK to LP onwards.
Then you can flash Nougat using TWRP (which will be version 3)
Thank you very much for your answer.
Please forgive me for my ignorance but, which LP ROM should I download? Can I install it via flashify, via TWRP 2.8, o flash?
Thank you again!
You can not use Flashify, you have to do it using Flashtools (with a PC) to go from KK to LP. Download LP 5.1.1 RC 5 from MAD.
fusant said:
You can not use Flashify, you have to do it using Flashtools (with a PC) to go from KK to LP. Download LP 5.1.1 RC 5 from MAD.
Click to expand...
Click to collapse
thanks to correct me, I thought Flashtools was meant
Well, I'm in trouble now... I installed successfully 5.1 in my S3, but when updated twrp 2.8 to 3.0, it did not work, so I can't install Nougat...
Now I have no twrp, and no root. How can I root to install twrp? I can't install superSU neither....
I'm sorry if it has been already answered but I can't find it.
Thanks a lot
I re-installed LP with Flash tools and everything worked right. (In twrp , it says 2.8 version, instead of 3.0, though).
Now I installed Nougat, and everything is ok.
Thank you for your excellent job!
I am on software version VS9803aa, can i install TWRP without any problems ?
You need to be on VS98039a to install TWRP using AutoRec.
Hi,
I'm going to use pixel experience rom.
I know that i should update firmware (and maybe vendor) manually.
If i download the stock zip from here: https://en.miui.com/download-360.html#582
and i install it with twrp, it will update the firmware and vendor?
I know the rom will not start because of twrp, but i just install it then install the costum rom back.
I don't want to use firmware update zips, i know it is exist and maybe more painless, but it don't have vendor and modem and so on.
This method will work for me to install stock zip then install costum rom again?
Hi there, user OragngeFox, there is an stable version now, will give u more options and stuff, and yes you gotta download full rom ZIP and flash it prior flashing any custom rom, also remember to flash Vbmeta.img, after flashing full rom and before flash new custom rom